ref: 82eaa84506a3e1ee3569d53ba7786cfc8d352b25
dir: /README.md/
# ORCΛ <img src='https://raw.githubusercontent.com/hundredrabbits/Orca/master/resources/logo.png' width="600"/> **Each letter of the alphabet is an operation**, lowercase letters typically operate on bang(`*`), uppercase letters operate on each frame. Bangs can be generated by various operations, such as `E` colliding with a `0`, see the [bang.orca](https://github.com/hundredrabbits/Orca/blob/master/examples/bang.orca) example. Watch a music video of [ORCΛ in action](https://twitter.com/neauoire/status/1069129232708657152). **C Port** for the [ORCΛ](https://github.com/hundredrabbits/Orca) programming environment, with a commandline interpreter. ## Prerequisites Core library: A C99 compiler (no VLAs required), plus enough libc for `malloc`, `realloc`, `free`, `memcpy`, `memset`, and `memmove`. Command-line interpreter: The above, plus POSIX, and enough libc for the common string operations (`strlen`, `strcmp`, etc.) Interactive terminal UI: The above, plus ncurses (or compatible curses library), and floating point support (for timing.) Optionally, PortMIDI can be used to enable direct MIDI output. Note: the core library for running an orca virtual machine *should* in theory build on anything, but the project is being worked on quickly right now, so it might accidentally include something from POSIX that isn't available on Windows, for example. The header files also need some restructuring. Please open an issue or send a message on twitter if you need help building the core virtual machine for your own use, and I'll try to clean it up for you. Your compiler must also support `#pragma once`, but it probably does. ### Raspberry Pi After the first step, it might be a good idea to do `sudo reboot`. ```sh sudo apt-get install git libncurses5-dev libncursesw5-dev libportmidi-dev git clone https://github.com/hundredrabbits/Orca-c.git cd Orca-c ./tool --portmidi build release orca # Build ./build/release/orca --portmidi-list-devices # Select Midi Device ./build/release/orca --portmidi-output-device 2 # Start ``` ## Build The build script is in `bash`. It should work with `gcc` (including the `musl-gcc` wrapper) and `clang`, and will automatically detect your compiler. Currently known to build on macOS (`gcc`, `clang`) and Linux (`gcc`, `musl-gcc`, and `clang`, optionally with `LLD`), and Windows via cygwin or WSL (`gcc` or `clang`). There is a fire-and-forget `make` wrapper around the build script. PortMIDI is an optional dependency. It can be enabled by adding the option `--portmidi` when running the `tool` build script. You can also disable the mouse by adding the `--nomouse` option, useful to avoid accidental touchpad clicks. ### Make ```sh make debug # debugging build, binary placed at build/debug/orca make release # optimized build, binary placed at build/release/orca make clean # removes build/ ``` ### Build Script Run `./tool --help` to see usage info. Examples: ```sh ./tool -c clang-7 --portmidi build release orca # Build the terminal ui with a compiler named # clang-7, with optimizations enabled, and with # PortMIDI enabled for MIDI output. # Binary placed at build/release/orca ./tool build debug cli # Debug build of the headless CLI interpreter. # Binary placed at build/debug/cli ./tool clean # Same as make clean, removes build/ ``` ## Run ### Interactive terminal UI ``` Usage: orca [options] [file] General options: --margins <number> Set cosmetic margins. Default: 2 --undo-limit <number> Set the maximum number of undo steps. If you plan to work with large files, set this to a low number. Default: 100 --initial-size <nxn> When creating a new grid file, use these starting dimensions. Default: 57x25 --bpm <number> Set the tempo (beats per minute). Default: 120 --seed <number> Set the seed for the random function. Default: 1 -h or --help Print this message and exit. OSC/MIDI options: --strict-timing Reduce the timing jitter of outgoing MIDI and OSC messages. Uses more CPU time. --osc-server <address> Hostname or IP address to send OSC messages to. Default: loopback (this machine) --osc-port <number or service name> UDP port (or service name) to send OSC messages to. This option must be set for OSC output to be enabled. Default: none --osc-midi-bidule <path> Set MIDI to be sent via OSC formatted for Plogue Bidule. The path argument is the path of the Plogue OSC MIDI device. Example: /OSC_MIDI_0/MIDI ``` Additional options are available if `orca` is built with `--portmidi`: ``` --portmidi-list-devices List the MIDI output devices available through PortMIDI, along with each associated device ID number, and then exit. Do this to figure out which ID to use with --portmidi-output-device --portmidi-output-device <number> Set MIDI to be sent via PortMIDI on a specified device ID. Example: 1 ``` #### Example: build and run `orca` with MIDI output ```sh $ ./tool --portmidi build release orca # compile orca $ build/release/orca --portmidi-list-devices # query for midi devices ID: 3 Name: IAC Driver Bus ID: 4 Name: USB MIDI Device $ build/release/orca --portmidi-output-device 3 # run orca with midi device 3 ``` #### Controls ``` ┌ Controls ───────────────────────────────────────────┐ │ Ctrl+Q Quit │ │ Arrow Keys Move Cursor │ │ Ctrl+D or F1 Open Main Menu │ │ 0-9, A-Z, a-z, Insert Character │ │ !, :, =, #, * │ │ Spacebar Play/Pause │ │ Ctrl+Z or Ctrl+U Undo │ │ Ctrl+X Cut │ │ Ctrl+C Copy │ │ Ctrl+V Paste │ │ Ctrl+S Save │ │ Ctrl+F Frame Step Forward │ │ Return Append/Overwrite Mode │ │ / Key Trigger Mode │ │ ' (quote) Rectangle Selection Mode │ │ Shift+Arrow Keys Adjust Rectangle Selection │ │ Escape Return to Normal Mode or Deselect │ │ ( and ) Resize Grid (Horizontal) │ │ _ and + Resize Grid (Vertical) │ │ [ and ] Adjust Grid Rulers (Horizontal) │ │ { and } Adjust Grid Rulers (Vertical) │ │ < and > Adjust BPM │ │ ? Controls (this message) │ └─────────────────────────────────────────────────────┘ ``` ### CLI interpreter The CLI (`cli` binary) reads from a file and runs the orca simulation for 1 timestep (default) or a specified number (`-t` option) and writes the resulting state of the grid to stdout. ```sh cli [-t timesteps] infile ``` You can also make `cli` read from stdin: ```sh echo -e "...\na34\n..." | cli /dev/stdin ``` ## Extras - Support this project through [Patreon](https://patreon.com/100). - See the [License](LICENSE.md) file for license rights and limitations (MIT). - Pull Requests are welcome!