ref: 7c285b049475f2139c234f1ce7a760e564fbee49
dir: /README.md/
# faust9p
Tools to compile [FAUST](https://faust.grame.fr) DSP code to a 9p
server, provide UI to control DSP, etc.
## Testing
So far only one instrument provided, which is a kick drum.
```
% ./6.out -m /n/kick
% cd /n/kick
# allocate one instance
% cd `{cat clone}
# check the A oscillator frequency
# the order is: type key value initial min max step
# it's different for different UI elements
% cat K*/a/frequency/ctl
vslider 0 100.000000 100.000000 10.000000 200.000000 5.000000
# raise frequency to 160Hz
% echo 160 > K*/a/f*/ctl
# toggle the gate, we need to compute once in between for it to actually be processed
# then listen to the sound
% echo 0 > 'Kick Drum/control/gate/ctl' && \
dd -if data -of /dev/null -count 1 -quiet 1 && \
echo 1 > 'Kick Drum/control/gate/ctl' && \
audio/pcmconv -i f32c2r44100 -l 128000 < data > /dev/audio
# increase the delay of A oscillator
% echo 0.2 > 'Kick Drum/a/delay/ctl' # make it
# now you can repeat the listen command to hear the difference
```
## Description
A DSP fs presents an interface to create instances of a DSP class by
reading the `clone` file. In the resulting directory `ctl` is used to
read general info about the dsp, `raw` is used to supply input to the
DSP (if it has any inputs) by writing to it, and output can be read
from it. The format is raw stream of `float`. `pcm` is the same but
is of format directly supported by `/dev/dsp` (two channels, 44100Hz).
Each DSP instance, in addition to the mentioned files, provides a file
tree that reflects the UI elements. UI elements may provide `ctl`
file to read initial and current, maximum and minimum, step, and may
be used to write a new value to it. File `value` is for watching the
value of the UI element change: first read gives current value and a
number of samples processed before the change, next read is blocked
until the value is changed.
Several DSPs may be connected by chaining their `raw` interfaces
together. If some parameters need to be changed dynamically during
processing with frame accuracy, it can be achieved by running the
chain for a chunk of data, changing the parameters, then continuing
processing.