ref: 798c452b3e1a7cba4b9f1b844cf97064cd06caa8
dir: /ay/ay38910.h/
#pragma once
/*
ay38910.h -- AY-3-8910/2/3 sound chip emulator
Do this:
#define CHIPS_IMPL
before you include this file in *one* C or C++ file to create the
implementation.
Optionally provde the following macros with your own implementation
CHIPS_ASSERT(c) -- your own assert macro (default: assert(c))
EMULATED PINS:
+-----------+
BC1 -->| |<-> DA0
BDIR -->| |...
| |<-> DA7
| |
| |<-> (IOA0)
| |...
| |<-> (IOA7)
| |
| |<-> (IOB0)
| |...
| |<-> (IOB7)
+-----------+
NOT EMULATED:
- the BC2 pin is ignored since it makes only sense when connected to
a CP1610 CPU
- the RESET pin state is ignored, instead call ay38910_reset()
## zlib/libpng license
Copyright (c) 2018 Andre Weissflog
This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the
use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software in a
product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not
be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
*/
#include <stdint.h>
#include <stdbool.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
Pin definitions.
Note that the BC2 is not emulated since it is usually always
set to active when not connected to a CP1610 processor. The
remaining BDIR and BC1 pins are interpreted as follows:
|BDIR|BC1|
+----+---+
| 0 | 0 | INACTIVE
| 0 | 1 | READ FROM PSG
| 1 | 0 | WRITE TO PSG
| 1 | 1 | LATCH ADDRESS
*/
/* 8 bits data/address bus shared with CPU data bus */
#define AY38910_DA0 (1ULL<<16)
#define AY38910_DA1 (1ULL<<17)
#define AY38910_DA2 (1ULL<<18)
#define AY38910_DA3 (1ULL<<19)
#define AY38910_DA4 (1ULL<<20)
#define AY38910_DA5 (1ULL<<21)
#define AY38910_DA6 (1ULL<<22)
#define AY38910_DA7 (1ULL<<23)
/* reset pin shared with CPU */
#define AY38910_RESET (1ULL<<34)
/* chip-specific pins start at position 44 */
#define AY38910_BDIR (1ULL<<40)
#define AY38910_BC1 (1ULL<<41)
/* IO port pins */
#define AY38910_IOA0 (1ULL<<48)
#define AY38910_IOA1 (1ULL<<49)
#define AY38910_IOA2 (1ULL<<50)
#define AY38910_IOA3 (1ULL<<51)
#define AY38910_IOA4 (1ULL<<52)
#define AY38910_IOA5 (1ULL<<53)
#define AY38910_IOA6 (1ULL<<54)
#define AY38910_IOA7 (1ULL<<55)
#define AY38910_IOB0 (1ULL<<56)
#define AY38910_IOB1 (1ULL<<57)
#define AY38910_IOB2 (1ULL<<58)
#define AY38910_IOB3 (1ULL<<59)
#define AY38910_IOB4 (1ULL<<60)
#define AY38910_IOB5 (1ULL<<61)
#define AY38910_IOB6 (1ULL<<62)
#define AY38910_IOB7 (1ULL<<63)
/* AY-3-8910 registers */
#define AY38910_REG_PERIOD_A_FINE (0)
#define AY38910_REG_PERIOD_A_COARSE (1)
#define AY38910_REG_PERIOD_B_FINE (2)
#define AY38910_REG_PERIOD_B_COARSE (3)
#define AY38910_REG_PERIOD_C_FINE (4)
#define AY38910_REG_PERIOD_C_COARSE (5)
#define AY38910_REG_PERIOD_NOISE (6)
#define AY38910_REG_ENABLE (7)
#define AY38910_REG_AMP_A (8)
#define AY38910_REG_AMP_B (9)
#define AY38910_REG_AMP_C (10)
#define AY38910_REG_ENV_PERIOD_FINE (11)
#define AY38910_REG_ENV_PERIOD_COARSE (12)
#define AY38910_REG_ENV_SHAPE_CYCLE (13)
#define AY38910_REG_IO_PORT_A (14) /* not on AY-3-8913 */
#define AY38910_REG_IO_PORT_B (15) /* not on AY-3-8912/3 */
/* number of registers */
#define AY38910_NUM_REGISTERS (16)
/* error-accumulation precision boost */
#define AY38910_FIXEDPOINT_SCALE (16)
/* number of channels */
#define AY38910_NUM_CHANNELS (3)
/* DC adjustment buffer length */
#define AY38910_DCADJ_BUFLEN (512)
/* IO port names */
#define AY38910_PORT_A (0)
#define AY38910_PORT_B (1)
/* envelope shape bits */
#define AY38910_ENV_HOLD (1<<0)
#define AY38910_ENV_ALTERNATE (1<<1)
#define AY38910_ENV_ATTACK (1<<2)
#define AY38910_ENV_CONTINUE (1<<3)
/* callbacks for input/output on I/O ports */
typedef uint8_t (*ay38910_in_t)(int port_id, void* user_data);
typedef void (*ay38910_out_t)(int port_id, uint8_t data, void* user_data);
/* chip subtypes */
typedef enum {
AY38910_TYPE_8910 = 0,
AY38910_TYPE_8912,
AY38910_TYPE_8913
} ay38910_type_t;
/* setup parameters for ay38910_init() call */
typedef struct {
ay38910_type_t type; /* the subtype (default 0 is AY-3-8910) */
int tick_hz; /* frequency at which ay38910_tick() will be called in Hz */
int sound_hz; /* number of samples that will be produced per second */
float magnitude; /* output sample magnitude, from 0.0 (silence) to 1.0 (max volume) */
ay38910_in_t in_cb; /* I/O port input callback */
ay38910_out_t out_cb; /* I/O port output callback */
void* user_data; /* optional user-data for callbacks */
} ay38910_desc_t;
/* a tone channel */
typedef struct {
uint16_t period;
uint16_t counter;
uint32_t bit;
uint32_t tone_disable;
uint32_t noise_disable;
} ay38910_tone_t;
/* the noise channel state */
typedef struct {
uint16_t period;
uint16_t counter;
uint32_t rng;
uint32_t bit;
} ay38910_noise_t;
/* the envelope generator */
typedef struct {
uint16_t period;
uint16_t counter;
bool shape_holding;
bool shape_hold;
uint8_t shape_counter;
uint8_t shape_state;
} ay38910_env_t;
/* AY-3-8910 state */
typedef struct {
ay38910_type_t type; /* the chip flavour */
ay38910_in_t in_cb; /* the port-input callback */
ay38910_out_t out_cb; /* the port-output callback */
void* user_data; /* optional user-data for callbacks */
uint32_t tick; /* a tick counter for internal clock division */
uint8_t addr; /* 4-bit address latch */
union { /* the register bank */
uint8_t reg[AY38910_NUM_REGISTERS];
struct {
uint8_t period_a_fine;
uint8_t period_a_coarse;
uint8_t period_b_fine;
uint8_t period_b_coarse;
uint8_t period_c_fine;
uint8_t period_c_coarse;
uint8_t period_noise;
uint8_t enable;
uint8_t amp_a;
uint8_t amp_b;
uint8_t amp_c;
uint8_t period_env_fine;
uint8_t period_env_coarse;
uint8_t env_shape_cycle;
uint8_t port_a;
uint8_t port_b;
};
};
ay38910_tone_t tone[AY38910_NUM_CHANNELS]; /* the 3 tone channels */
ay38910_noise_t noise; /* the noise generator state */
ay38910_env_t env; /* the envelope generator state */
uint64_t pins; /* last pin state for debug inspection */
/* sample generation state */
int sample_period;
int sample_counter;
float mag;
float sample;
float dcadj_sum;
uint32_t dcadj_pos;
float dcadj_buf[AY38910_DCADJ_BUFLEN];
} ay38910_t;
/* extract 8-bit data bus from 64-bit pins */
#define AY38910_GET_DATA(p) ((uint8_t)(p>>16))
/* merge 8-bit data bus value into 64-bit pins */
#define AY38910_SET_DATA(p,d) {p=((p&~0xFF0000)|((d&0xFF)<<16));}
/* set 8-bit port A data on 64-bit pin mask */
#define AY38910_SET_PA(p,d) {p=((p&~0x00FF000000000000ULL)|((((uint64_t)d)&0xFFULL)<<48));}
/* set 8-bit port B data on 64-bit pin mask */
#define AY38910_SET_PB(p,d) {p=((p&~0xFF00000000000000ULL)|((((uint64_t)d)&0xFFULL)<<56));}
/* initialize a AY-3-8910 instance */
void ay38910_init(ay38910_t* ay, const ay38910_desc_t* desc);
/* reset an existing AY-3-8910 instance */
void ay38910_reset(ay38910_t* ay);
/* perform an IO request machine cycle */
uint64_t ay38910_iorq(ay38910_t* ay, uint64_t pins);
/* tick the AY-3-8910, return true if a new sample is ready */
bool ay38910_tick(ay38910_t* ay);
#ifdef __cplusplus
} /* extern "C" */
#endif
/*-- IMPLEMENTATION ----------------------------------------------------------*/
#ifdef CHIPS_IMPL
#include <string.h>
#ifndef CHIPS_ASSERT
#include <assert.h>
#define CHIPS_ASSERT(c) assert(c)
#endif
/* extract 8-bit data bus from 64-bit pins */
#define AY38910_DATA(p) ((uint8_t)(p>>16))
/* merge 8-bit data bus value into 64-bit pins */
#define AY38910_SET_DATA(p,d) {p=((p&~0xFF0000)|((d&0xFF)<<16));}
/* valid register content bitmasks */
static const uint8_t _ay38910_reg_mask[AY38910_NUM_REGISTERS] = {
0xFF, /* AY38910_REG_PERIOD_A_FINE */
0x0F, /* AY38910_REG_PERIOD_A_COARSE */
0xFF, /* AY38910_REG_PERIOD_B_FINE */
0x0F, /* AY38910_REG_PERIOD_B_COARSE */
0xFF, /* AY38910_REG_PERIOD_C_FINE */
0x0F, /* AY38910_REG_PERIOD_C_COARSE */
0x1F, /* AY38910_REG_PERIOD_NOISE */
0xFF, /* AY38910_REG_ENABLE */
0x1F, /* AY38910_REG_AMP_A (0..3: 4-bit volume, 4: use envelope) */
0x1F, /* AY38910_REG_AMP_B (0..3: 4-bit volume, 4: use envelope) */
0x1F, /* AY38910_REG_AMP_C (0..3: 4-bit volume, 4: use envelope) */
0xFF, /* AY38910_REG_ENV_PERIOD_FINE */
0xFF, /* AY38910_REG_ENV_PERIOD_COARSE */
0x0F, /* AY38910_REG_ENV_SHAPE_CYCLE */
0xFF, /* AY38910_REG_IO_PORT_A */
0xFF, /* AY38910_REG_IO_PORT_B */
};
/* volume table from: https://github.com/true-grue/ayumi/blob/master/ayumi.c */
static const float _ay38910_volumes[16] = {
0.0f,
0.00999465934234f,
0.0144502937362f,
0.0210574502174f,
0.0307011520562f,
0.0455481803616f,
0.0644998855573f,
0.107362478065f,
0.126588845655f,
0.20498970016f,
0.292210269322f,
0.372838941024f,
0.492530708782f,
0.635324635691f,
0.805584802014f,
1.0f
};
/* canned envelope generator shapes */
static const uint8_t _ay38910_shapes[16][32] = {
/* CONTINUE ATTACK ALTERNATE HOLD */
/* 0 0 X X */
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
/* 0 1 X X */
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
/* 1 0 0 0 */
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 },
/* 1 0 0 1 */
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
/* 1 0 1 0 */
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
/* 1 0 1 1 */
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15 },
/* 1 1 0 0 */
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 },
/* 1 1 0 1 */
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15 },
/* 1 1 1 0 */
{ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0 },
/* 1 1 1 1 */
{ 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
};
/* DC adjustment filter from StSound, this moves an "offcenter"
signal back to the zero-line (e.g. the volume-level output
from the chip simulation which is >0.0 gets converted to
a +/- sample value)
*/
static float _ay38910_dcadjust(ay38910_t* ay, float s) {
ay->dcadj_sum -= ay->dcadj_buf[ay->dcadj_pos];
ay->dcadj_sum += s;
ay->dcadj_buf[ay->dcadj_pos] = s;
ay->dcadj_pos = (ay->dcadj_pos + 1) & (AY38910_DCADJ_BUFLEN-1);
return s - (ay->dcadj_sum / AY38910_DCADJ_BUFLEN);
}
/* update computed values after registers have been reprogrammed */
static void _ay38910_update_values(ay38910_t* ay) {
for (int i = 0; i < AY38910_NUM_CHANNELS; i++) {
ay38910_tone_t* chn = &ay->tone[i];
/* "...Note also that due to the design technique used in the Tone Period
count-down, the lowest period value is 000000000001 (divide by 1)
and the highest period value is 111111111111 (divide by 4095)
*/
chn->period = (ay->reg[2*i+1]<<8)|(ay->reg[2*i]);
if (0 == chn->period) {
chn->period = 1;
}
/* a set 'enable bit' actually means 'disabled' */
chn->tone_disable = (ay->enable>>i) & 1;
chn->noise_disable = (ay->enable>>(3+i)) & 1;
}
/* noise generator values */
ay->noise.period = ay->period_noise;
if (ay->noise.period == 0) {
ay->noise.period = 1;
}
/* envelope generator values */
ay->env.period = (ay->period_env_coarse<<8)|ay->period_env_fine;
if (ay->env.period == 0) {
ay->env.period = 1;
}
}
/* reset the env shape generator, only called when env-shape register is updated */
static void _ay38910_restart_env_shape(ay38910_t* ay) {
ay->env.shape_holding = false;
ay->env.shape_counter = 0;
if (!(ay->env_shape_cycle & AY38910_ENV_CONTINUE) || (ay->env_shape_cycle & AY38910_ENV_HOLD)) {
ay->env.shape_hold = true;
}
else {
ay->env.shape_hold = false;
}
}
void ay38910_init(ay38910_t* ay, const ay38910_desc_t* desc) {
CHIPS_ASSERT(ay && desc);
CHIPS_ASSERT(desc->tick_hz > 0);
CHIPS_ASSERT(desc->sound_hz > 0);
memset(ay, 0, sizeof(*ay));
/* note: input and output callbacks are optional */
ay->in_cb = desc->in_cb;
ay->out_cb = desc->out_cb;
ay->user_data = desc->user_data;
ay->type = desc->type;
ay->noise.rng = 1;
ay->sample_period = (desc->tick_hz * AY38910_FIXEDPOINT_SCALE) / desc->sound_hz;
ay->sample_counter = ay->sample_period;
ay->mag = desc->magnitude;
_ay38910_update_values(ay);
_ay38910_restart_env_shape(ay);
}
void ay38910_reset(ay38910_t* ay) {
CHIPS_ASSERT(ay);
ay->addr = 0;
ay->tick = 0;
for (int i = 0; i < AY38910_NUM_REGISTERS; i++) {
ay->reg[i] = 0;
}
_ay38910_update_values(ay);
_ay38910_restart_env_shape(ay);
}
bool ay38910_tick(ay38910_t* ay) {
ay->tick++;
if ((ay->tick & 7) == 0) {
/* tick the tone channels */
for (int i = 0; i < AY38910_NUM_CHANNELS; i++) {
ay38910_tone_t* chn = &ay->tone[i];
if (++chn->counter >= chn->period) {
chn->counter = 0;
chn->bit ^= 1;
}
}
/* tick the noise channel */
if (++ay->noise.counter >= ay->noise.period) {
ay->noise.counter = 0;
ay->noise.bit ^= 1;
if (ay->noise.bit) {
// random number generator from MAME:
// https://github.com/mamedev/mame/blob/master/src/devices/sound/ay8910.cpp
// The Random Number Generator of the 8910 is a 17-bit shift
// register. The input to the shift register is bit0 XOR bit3
// (bit0 is the output). This was verified on AY-3-8910 and YM2149 chips.
ay->noise.rng ^= (((ay->noise.rng & 1) ^ ((ay->noise.rng >> 3) & 1)) << 17);
ay->noise.rng >>= 1;
}
}
}
/* tick the envelope generator */
if ((ay->tick & 15) == 0) {
if (++ay->env.counter >= ay->env.period) {
ay->env.counter = 0;
if (!ay->env.shape_holding) {
ay->env.shape_counter = (ay->env.shape_counter + 1) & 0x1F;
if (ay->env.shape_hold && (0x1F == ay->env.shape_counter)) {
ay->env.shape_holding = true;
}
}
ay->env.shape_state = _ay38910_shapes[ay->env_shape_cycle][ay->env.shape_counter];
}
}
/* generate new sample? */
ay->sample_counter -= AY38910_FIXEDPOINT_SCALE;
if (ay->sample_counter <= 0) {
ay->sample_counter += ay->sample_period;
float sm = 0.0f;
for (int i = 0; i < AY38910_NUM_CHANNELS; i++) {
const ay38910_tone_t* chn = &ay->tone[i];
float vol;
if (0 == (ay->reg[AY38910_REG_AMP_A+i] & (1<<4))) {
/* fixed amplitude */
vol = _ay38910_volumes[ay->reg[AY38910_REG_AMP_A+i] & 0x0F];
}
else {
/* envelope control */
vol = _ay38910_volumes[ay->env.shape_state];
}
int vol_enable = (chn->bit|chn->tone_disable) & ((ay->noise.rng&1)|(chn->noise_disable));
if (vol_enable) {
sm += vol;
}
}
ay->sample = _ay38910_dcadjust(ay, sm) * ay->mag;
return true; /* new sample is ready */
}
/* fallthrough: no new sample ready yet */
return false;
}
uint64_t ay38910_iorq(ay38910_t* ay, uint64_t pins) {
if (pins & (AY38910_BDIR|AY38910_BC1)) {
if (pins & AY38910_BDIR) {
const uint8_t data = AY38910_DATA(pins);
if (pins & AY38910_BC1) {
/* latch address */
ay->addr = data;
}
else {
/* Write to register using the currently latched address.
The whole 8-bit address is considered, the low 4 bits
are the register index, and the upper bits are burned
into the chip as a 'chip select' and are usually 0
(this emulator assumes they are 0, so addresses greater
are ignored for reading and writing)
*/
if (ay->addr < AY38910_NUM_REGISTERS) {
/* write register content, and update dependent values */
ay->reg[ay->addr] = data & _ay38910_reg_mask[ay->addr];
_ay38910_update_values(ay);
if (ay->addr == AY38910_REG_ENV_SHAPE_CYCLE) {
_ay38910_restart_env_shape(ay);
}
/* Handle port output:
If port A or B is in output mode, call the
port output callback to notify the outer world
about the new register value.
input/output mode is defined by bits 6 and 7 of
the 'enable' register
bit6 = 1: port A in output mode
bit7 = 1: port B in output mode
*/
else if (ay->addr == AY38910_REG_IO_PORT_A) {
if (ay->enable & (1<<6)) {
if (ay->out_cb) {
ay->out_cb(AY38910_PORT_A, ay->port_a, ay->user_data);
}
}
}
else if (ay->addr == AY38910_REG_IO_PORT_B) {
if (ay->enable & (1<<7)) {
if (ay->out_cb) {
ay->out_cb(AY38910_PORT_B, ay->port_b, ay->user_data);
}
}
}
}
}
}
else {
/* Read from register using the currently latched address.
See 'write' for why the latched address must be in the
valid register range to have an effect.
*/
if (ay->addr < AY38910_NUM_REGISTERS) {
/* Handle port input:
If port A or B is in input mode, first call the port
input callback to update the port register content.
input/output mode is defined by bits 6 and 7 of
the 'enable' register:
bit6 = 0: port A in input mode
bit7 = 0: port B in input mode
*/
if (ay->addr == AY38910_REG_IO_PORT_A) {
if ((ay->enable & (1<<6)) == 0) {
if (ay->in_cb) {
ay->port_a = ay->in_cb(AY38910_PORT_A, ay->user_data);
}
else {
ay->port_a = 0xFF;
}
}
}
else if (ay->addr == AY38910_REG_IO_PORT_B) {
if ((ay->enable & (1<<7)) == 0) {
if (ay->in_cb) {
ay->port_b = ay->in_cb(AY38910_PORT_B, ay->user_data);
}
else {
ay->port_b = 0xFF;
}
}
}
/* read register content into data pins */
const uint8_t data = ay->reg[ay->addr];
AY38910_SET_DATA(pins, data);
}
}
AY38910_SET_PA(pins, ay->port_a);
AY38910_SET_PB(pins, ay->port_b);
ay->pins = pins;
}
return pins;
}
#endif /* CHIPS_IMPL */