shithub: libvpx

ref: f9f0879756c6c6a5af3cd43986ffde39b3b5deae
dir: /vp9/encoder/vp9_aq_cyclicrefresh.c/

View raw version
/*
 *  Copyright (c) 2014 The WebM project authors. All Rights Reserved.
 *
 *  Use of this source code is governed by a BSD-style license
 *  that can be found in the LICENSE file in the root of the source
 *  tree. An additional intellectual property rights grant can be found
 *  in the file PATENTS.  All contributing project authors may
 *  be found in the AUTHORS file in the root of the source tree.
 */

#include <limits.h>
#include <math.h>

#include "vp9/encoder/vp9_aq_cyclicrefresh.h"

#include "vp9/common/vp9_seg_common.h"

#include "vp9/encoder/vp9_ratectrl.h"
#include "vp9/encoder/vp9_segmentation.h"

struct CYCLIC_REFRESH {
  // Percentage of super-blocks per frame that are targeted as candidates
  // for cyclic refresh.
  int max_sbs_perframe;
  // Maximum q-delta as percentage of base q.
  int max_qdelta_perc;
  // Block size below which we don't apply cyclic refresh.
  BLOCK_SIZE min_block_size;
  // Superblock starting index for cycling through the frame.
  int sb_index;
  // Controls how long a block will need to wait to be refreshed again.
  int time_for_refresh;
  // Actual number of (8x8) blocks that were applied delta-q (segment 1).
  int num_seg_blocks;
  // Actual encoding bits for segment 1.
  int actual_seg_bits;
  // RD mult. parameters for segment 1.
  int rdmult;
  // Cyclic refresh map.
  signed char *map;
  // Projected rate and distortion for the current superblock.
  int64_t projected_rate_sb;
  int64_t projected_dist_sb;
  // Thresholds applied to projected rate/distortion of the superblock.
  int64_t thresh_rate_sb;
  int64_t thresh_dist_sb;
};

CYCLIC_REFRESH *vp9_cyclic_refresh_alloc(int mi_rows, int mi_cols) {
  CYCLIC_REFRESH *const cr = vpx_calloc(1, sizeof(*cr));
  if (cr == NULL)
    return NULL;

  cr->map = vpx_calloc(mi_rows * mi_cols, sizeof(*cr->map));
  if (cr->map == NULL) {
    vpx_free(cr);
    return NULL;
  }

  return cr;
}

void vp9_cyclic_refresh_free(CYCLIC_REFRESH *cr) {
  vpx_free(cr->map);
  vpx_free(cr);
}

// Check if we should turn off cyclic refresh based on bitrate condition.
static int apply_cyclic_refresh_bitrate(const VP9_COMMON *cm,
                                        const RATE_CONTROL *rc) {
  // Turn off cyclic refresh if bits available per frame is not sufficiently
  // larger than bit cost of segmentation. Segment map bit cost should scale
  // with number of seg blocks, so compare available bits to number of blocks.
  // Average bits available per frame = avg_frame_bandwidth
  // Number of (8x8) blocks in frame = mi_rows * mi_cols;
  const float factor  = 0.5;
  const int number_blocks = cm->mi_rows  * cm->mi_cols;
  // The condition below corresponds to turning off at target bitrates:
  // ~24kbps for CIF, 72kbps for VGA (at 30fps).
  // Also turn off at very small frame sizes, to avoid too large fraction of
  // superblocks to be refreshed per frame. Threshold below is less than QCIF.
  if (rc->avg_frame_bandwidth < factor * number_blocks ||
      number_blocks / 64 < 5)
    return 0;
  else
    return 1;
}

// Check if this coding block, of size bsize, should be considered for refresh
// (lower-qp coding). Decision can be based on various factors, such as
// size of the coding block (i.e., below min_block size rejected), coding
// mode, and rate/distortion.
static int candidate_refresh_aq(const CYCLIC_REFRESH *cr,
                                const MB_MODE_INFO *mbmi,
                                BLOCK_SIZE bsize, int use_rd) {
  if (use_rd) {
    // If projected rate is below the thresh_rate (well below target,
    // so undershoot expected), accept it for lower-qp coding.
    if (cr->projected_rate_sb < cr->thresh_rate_sb)
      return 1;
    // Otherwise, reject the block for lower-qp coding if any of the following:
    // 1) prediction block size is below min_block_size
    // 2) mode is non-zero mv and projected distortion is above thresh_dist
    // 3) mode is an intra-mode (we may want to allow some of this under
    // another thresh_dist)
    else if (bsize < cr->min_block_size ||
             (mbmi->mv[0].as_int != 0 &&
              cr->projected_dist_sb > cr->thresh_dist_sb) ||
             !is_inter_block(mbmi))
      return 0;
    else
      return 1;
  } else {
    // Rate/distortion not used for update.
    if (bsize < cr->min_block_size ||
        mbmi->mv[0].as_int != 0 ||
        !is_inter_block(mbmi))
      return 0;
    else
      return 1;
  }
}

// Prior to coding a given prediction block, of size bsize at (mi_row, mi_col),
// check if we should reset the segment_id, and update the cyclic_refresh map
// and segmentation map.
void vp9_cyclic_refresh_update_segment(VP9_COMP *const cpi,
                                       MB_MODE_INFO *const mbmi,
                                       int mi_row, int mi_col,
                                       BLOCK_SIZE bsize, int use_rd) {
  const VP9_COMMON *const cm = &cpi->common;
  CYCLIC_REFRESH *const cr = cpi->cyclic_refresh;
  const int bw = num_8x8_blocks_wide_lookup[bsize];
  const int bh = num_8x8_blocks_high_lookup[bsize];
  const int xmis = MIN(cm->mi_cols - mi_col, bw);
  const int ymis = MIN(cm->mi_rows - mi_row, bh);
  const int block_index = mi_row * cm->mi_cols + mi_col;
  const int refresh_this_block = cpi->mb.in_static_area ||
                                 candidate_refresh_aq(cr, mbmi, bsize, use_rd);
  // Default is to not update the refresh map.
  int new_map_value = cr->map[block_index];
  int x = 0; int y = 0;

  // Check if we should reset the segment_id for this block.
  if (mbmi->segment_id > 0 && !refresh_this_block)
    mbmi->segment_id = 0;

  // Update the cyclic refresh map, to be used for setting segmentation map
  // for the next frame. If the block  will be refreshed this frame, mark it
  // as clean. The magnitude of the -ve influences how long before we consider
  // it for refresh again.
  if (mbmi->segment_id == 1) {
    new_map_value = -cr->time_for_refresh;
  } else if (refresh_this_block) {
    // Else if it is accepted as candidate for refresh, and has not already
    // been refreshed (marked as 1) then mark it as a candidate for cleanup
    // for future time (marked as 0), otherwise don't update it.
    if (cr->map[block_index] == 1)
      new_map_value = 0;
  } else {
    // Leave it marked as block that is not candidate for refresh.
    new_map_value = 1;
  }
  // Update entries in the cyclic refresh map with new_map_value, and
  // copy mbmi->segment_id into global segmentation map.
  for (y = 0; y < ymis; y++)
    for (x = 0; x < xmis; x++) {
      cr->map[block_index + y * cm->mi_cols + x] = new_map_value;
      cpi->segmentation_map[block_index + y * cm->mi_cols + x] =
          mbmi->segment_id;
    }
  // Keep track of actual number (in units of 8x8) of blocks in segment 1 used
  // for encoding this frame.
  if (mbmi->segment_id)
    cr->num_seg_blocks += xmis * ymis;
}

// Setup cyclic background refresh: set delta q and segmentation map.
void vp9_cyclic_refresh_setup(VP9_COMP *const cpi) {
  VP9_COMMON *const cm = &cpi->common;
  const RATE_CONTROL *const rc = &cpi->rc;
  CYCLIC_REFRESH *const cr = cpi->cyclic_refresh;
  struct segmentation *const seg = &cm->seg;
  unsigned char *const seg_map = cpi->segmentation_map;
  const int apply_cyclic_refresh  = apply_cyclic_refresh_bitrate(cm, rc);
  // Don't apply refresh on key frame or enhancement layer frames.
  if (!apply_cyclic_refresh ||
      (cm->frame_type == KEY_FRAME) ||
      (cpi->svc.temporal_layer_id > 0)) {
    // Set segmentation map to 0 and disable.
    vpx_memset(seg_map, 0, cm->mi_rows * cm->mi_cols);
    vp9_disable_segmentation(&cm->seg);
    if (cm->frame_type == KEY_FRAME)
      cr->sb_index = 0;
    return;
  } else {
    int qindex_delta = 0;
    int i, block_count, bl_index, sb_rows, sb_cols, sbs_in_frame;
    int xmis, ymis, x, y, qindex2;

    // Rate target ratio to set q delta.
    const float rate_ratio_qdelta = 2.0;
    const double q = vp9_convert_qindex_to_q(cm->base_qindex);
    vp9_clear_system_state();
    // Some of these parameters may be set via codec-control function later.
    cr->max_sbs_perframe = 10;
    cr->max_qdelta_perc = 50;
    cr->min_block_size = BLOCK_8X8;
    cr->time_for_refresh = 1;
    // Set rate threshold to some fraction of target (and scaled by 256).
    cr->thresh_rate_sb = (rc->sb64_target_rate * 256) >> 2;
    // Distortion threshold, quadratic in Q, scale factor to be adjusted.
    cr->thresh_dist_sb = 8 * (int)(q * q);
    if (cpi->sf.use_nonrd_pick_mode) {
      // May want to be more conservative with thresholds in non-rd mode for now
      // as rate/distortion are derived from model based on prediction residual.
      cr->thresh_rate_sb = (rc->sb64_target_rate * 256) >> 3;
      cr->thresh_dist_sb = 4 * (int)(q * q);
    }

    cr->num_seg_blocks = 0;
    // Set up segmentation.
    // Clear down the segment map.
    vpx_memset(seg_map, 0, cm->mi_rows * cm->mi_cols);
    vp9_enable_segmentation(&cm->seg);
    vp9_clearall_segfeatures(seg);
    // Select delta coding method.
    seg->abs_delta = SEGMENT_DELTADATA;

    // Note: setting temporal_update has no effect, as the seg-map coding method
    // (temporal or spatial) is determined in vp9_choose_segmap_coding_method(),
    // based on the coding cost of each method. For error_resilient mode on the
    // last_frame_seg_map is set to 0, so if temporal coding is used, it is
    // relative to 0 previous map.
    // seg->temporal_update = 0;

    // Segment 0 "Q" feature is disabled so it defaults to the baseline Q.
    vp9_disable_segfeature(seg, 0, SEG_LVL_ALT_Q);
    // Use segment 1 for in-frame Q adjustment.
    vp9_enable_segfeature(seg, 1, SEG_LVL_ALT_Q);

    // Set the q delta for segment 1.
    qindex_delta = vp9_compute_qdelta_by_rate(rc, cm->frame_type,
                                              cm->base_qindex,
                                              rate_ratio_qdelta);
    // TODO(marpan): Incorporate the actual-vs-target rate over/undershoot from
    // previous encoded frame.
    if (-qindex_delta > cr->max_qdelta_perc * cm->base_qindex / 100)
      qindex_delta = -cr->max_qdelta_perc * cm->base_qindex / 100;

    // Compute rd-mult for segment 1.
    qindex2 = clamp(cm->base_qindex + cm->y_dc_delta_q + qindex_delta, 0, MAXQ);
    cr->rdmult = vp9_compute_rd_mult(cpi, qindex2);

    vp9_set_segdata(seg, 1, SEG_LVL_ALT_Q, qindex_delta);

    sb_cols = (cm->mi_cols + MI_BLOCK_SIZE - 1) / MI_BLOCK_SIZE;
    sb_rows = (cm->mi_rows + MI_BLOCK_SIZE - 1) / MI_BLOCK_SIZE;
    sbs_in_frame = sb_cols * sb_rows;
    // Number of target superblocks to get the q delta (segment 1).
    block_count = cr->max_sbs_perframe * sbs_in_frame / 100;
    // Set the segmentation map: cycle through the superblocks, starting at
    // cr->mb_index, and stopping when either block_count blocks have been found
    // to be refreshed, or we have passed through whole frame.
    assert(cr->sb_index < sbs_in_frame);
    i = cr->sb_index;
    do {
      int sum_map = 0;
      // Get the mi_row/mi_col corresponding to superblock index i.
      int sb_row_index = (i / sb_cols);
      int sb_col_index = i - sb_row_index * sb_cols;
      int mi_row = sb_row_index * MI_BLOCK_SIZE;
      int mi_col = sb_col_index * MI_BLOCK_SIZE;
      assert(mi_row >= 0 && mi_row < cm->mi_rows);
      assert(mi_col >= 0 && mi_col < cm->mi_cols);
      bl_index = mi_row * cm->mi_cols + mi_col;
      // Loop through all 8x8 blocks in superblock and update map.
      xmis = MIN(cm->mi_cols - mi_col,
                 num_8x8_blocks_wide_lookup[BLOCK_64X64]);
      ymis = MIN(cm->mi_rows - mi_row,
                 num_8x8_blocks_high_lookup[BLOCK_64X64]);
      for (y = 0; y < ymis; y++) {
        for (x = 0; x < xmis; x++) {
          const int bl_index2 = bl_index + y * cm->mi_cols + x;
          // If the block is as a candidate for clean up then mark it
          // for possible boost/refresh (segment 1). The segment id may get
          // reset to 0 later if block gets coded anything other than ZEROMV.
          if (cr->map[bl_index2] == 0) {
            seg_map[bl_index2] = 1;
            sum_map++;
          } else if (cr->map[bl_index2] < 0) {
            cr->map[bl_index2]++;
          }
        }
      }
      // Enforce constant segment over superblock.
      // If segment is partial over superblock, reset to either all 1 or 0.
      if (sum_map > 0 && sum_map < xmis * ymis) {
        const int new_value = (sum_map >= xmis * ymis / 2);
        for (y = 0; y < ymis; y++)
          for (x = 0; x < xmis; x++)
            seg_map[bl_index + y * cm->mi_cols + x] = new_value;
      }
      i++;
      if (i == sbs_in_frame) {
        i = 0;
      }
      if (sum_map >= xmis * ymis /2)
        block_count--;
    } while (block_count && i != cr->sb_index);
    cr->sb_index = i;
  }
}

void vp9_cyclic_refresh_set_rate_and_dist_sb(CYCLIC_REFRESH *cr,
                                             int64_t rate_sb, int64_t dist_sb) {
  cr->projected_rate_sb = rate_sb;
  cr->projected_dist_sb = dist_sb;
}

int vp9_cyclic_refresh_get_rdmult(const CYCLIC_REFRESH *cr) {
  return cr->rdmult;
}