ref: 6fbc354c97ca45754a76674dba5f6b43c2b0c15a
dir: /test/datarate_test.cc/
/*
* Copyright (c) 2012 The WebM project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include "./vpx_config.h"
#include "third_party/googletest/src/include/gtest/gtest.h"
#include "test/codec_factory.h"
#include "test/encode_test_driver.h"
#include "test/i420_video_source.h"
#include "test/util.h"
#include "test/y4m_video_source.h"
#include "vpx/vpx_codec.h"
namespace {
class DatarateTestLarge
: public ::libvpx_test::EncoderTest,
public ::libvpx_test::CodecTestWith2Params<libvpx_test::TestMode, int> {
public:
DatarateTestLarge() : EncoderTest(GET_PARAM(0)) {}
virtual ~DatarateTestLarge() {}
protected:
virtual void SetUp() {
InitializeConfig();
SetMode(GET_PARAM(1));
set_cpu_used_ = GET_PARAM(2);
ResetModel();
}
virtual void ResetModel() {
last_pts_ = 0;
bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
frame_number_ = 0;
first_drop_ = 0;
bits_total_ = 0;
duration_ = 0.0;
denoiser_offon_test_ = 0;
denoiser_offon_period_ = -1;
gf_boost_ = 0;
use_roi_ = 0;
}
virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video,
::libvpx_test::Encoder *encoder) {
if (video->frame() == 0) {
encoder->Control(VP8E_SET_NOISE_SENSITIVITY, denoiser_on_);
encoder->Control(VP8E_SET_CPUUSED, set_cpu_used_);
encoder->Control(VP8E_SET_GF_CBR_BOOST_PCT, gf_boost_);
}
#if CONFIG_VP8_ENCODER
if (use_roi_ == 1) {
encoder->Control(VP8E_SET_ROI_MAP, &roi_);
}
#endif
if (denoiser_offon_test_) {
ASSERT_GT(denoiser_offon_period_, 0)
<< "denoiser_offon_period_ is not positive.";
if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
// Flip denoiser_on_ periodically
denoiser_on_ ^= 1;
}
encoder->Control(VP8E_SET_NOISE_SENSITIVITY, denoiser_on_);
}
const vpx_rational_t tb = video->timebase();
timebase_ = static_cast<double>(tb.num) / tb.den;
duration_ = 0;
}
virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) {
// Time since last timestamp = duration.
vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
// TODO(jimbankoski): Remove these lines when the issue:
// http://code.google.com/p/webm/issues/detail?id=496 is fixed.
// For now the codec assumes buffer starts at starting buffer rate
// plus one frame's time.
if (last_pts_ == 0) duration = 1;
// Add to the buffer the bits we'd expect from a constant bitrate server.
bits_in_buffer_model_ += static_cast<int64_t>(
duration * timebase_ * cfg_.rc_target_bitrate * 1000);
/* Test the buffer model here before subtracting the frame. Do so because
* the way the leaky bucket model works in libvpx is to allow the buffer to
* empty - and then stop showing frames until we've got enough bits to
* show one. As noted in comment below (issue 495), this does not currently
* apply to key frames. For now exclude key frames in condition below. */
const bool key_frame =
(pkt->data.frame.flags & VPX_FRAME_IS_KEY) ? true : false;
if (!key_frame) {
ASSERT_GE(bits_in_buffer_model_, 0)
<< "Buffer Underrun at frame " << pkt->data.frame.pts;
}
const int64_t frame_size_in_bits = pkt->data.frame.sz * 8;
// Subtract from the buffer the bits associated with a played back frame.
bits_in_buffer_model_ -= frame_size_in_bits;
// Update the running total of bits for end of test datarate checks.
bits_total_ += frame_size_in_bits;
// If first drop not set and we have a drop set it to this time.
if (!first_drop_ && duration > 1) first_drop_ = last_pts_ + 1;
// Update the most recent pts.
last_pts_ = pkt->data.frame.pts;
// We update this so that we can calculate the datarate minus the last
// frame encoded in the file.
bits_in_last_frame_ = frame_size_in_bits;
++frame_number_;
}
virtual void EndPassHook(void) {
if (bits_total_) {
const double file_size_in_kb = bits_total_ / 1000.; // bits per kilobit
duration_ = (last_pts_ + 1) * timebase_;
// Effective file datarate includes the time spent prebuffering.
effective_datarate_ = (bits_total_ - bits_in_last_frame_) / 1000.0 /
(cfg_.rc_buf_initial_sz / 1000.0 + duration_);
file_datarate_ = file_size_in_kb / duration_;
}
}
vpx_codec_pts_t last_pts_;
int64_t bits_in_buffer_model_;
double timebase_;
int frame_number_;
vpx_codec_pts_t first_drop_;
int64_t bits_total_;
double duration_;
double file_datarate_;
double effective_datarate_;
int64_t bits_in_last_frame_;
int denoiser_on_;
int denoiser_offon_test_;
int denoiser_offon_period_;
int set_cpu_used_;
int gf_boost_;
int use_roi_;
vpx_roi_map_t roi_;
};
#if CONFIG_TEMPORAL_DENOISING
// Check basic datarate targeting, for a single bitrate, but loop over the
// various denoiser settings.
TEST_P(DatarateTestLarge, DenoiserLevels) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
for (int j = 1; j < 5; ++j) {
// Run over the denoiser levels.
// For the temporal denoiser (#if CONFIG_TEMPORAL_DENOISING) the level j
// refers to the 4 denoiser modes: denoiserYonly, denoiserOnYUV,
// denoiserOnAggressive, and denoiserOnAdaptive.
denoiser_on_ = j;
cfg_.rc_target_bitrate = 300;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
}
// Check basic datarate targeting, for a single bitrate, when denoiser is off
// and on.
TEST_P(DatarateTestLarge, DenoiserOffOn) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 299);
cfg_.rc_target_bitrate = 300;
ResetModel();
// The denoiser is off by default.
denoiser_on_ = 0;
// Set the offon test flag.
denoiser_offon_test_ = 1;
denoiser_offon_period_ = 100;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
#endif // CONFIG_TEMPORAL_DENOISING
TEST_P(DatarateTestLarge, BasicBufferModel) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
// 2 pass cbr datarate control has a bug hidden by the small # of
// frames selected in this encode. The problem is that even if the buffer is
// negative we produce a keyframe on a cutscene. Ignoring datarate
// constraints
// TODO(jimbankoski): ( Fix when issue
// http://code.google.com/p/webm/issues/detail?id=495 is addressed. )
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
// There is an issue for low bitrates in real-time mode, where the
// effective_datarate slightly overshoots the target bitrate.
// This is same the issue as noted about (#495).
// TODO(jimbankoski/marpan): Update test to run for lower bitrates (< 100),
// when the issue is resolved.
for (int i = 100; i < 800; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
}
TEST_P(DatarateTestLarge, ChangingDropFrameThresh) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_max_quantizer = 36;
cfg_.rc_end_usage = VPX_CBR;
cfg_.rc_target_bitrate = 200;
cfg_.kf_mode = VPX_KF_DISABLED;
const int frame_count = 40;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, frame_count);
// Here we check that the first dropped frame gets earlier and earlier
// as the drop frame threshold is increased.
const int kDropFrameThreshTestStep = 30;
vpx_codec_pts_t last_drop = frame_count;
for (int i = 1; i < 91; i += kDropFrameThreshTestStep) {
cfg_.rc_dropframe_thresh = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_LE(first_drop_, last_drop)
<< " The first dropped frame for drop_thresh " << i
<< " > first dropped frame for drop_thresh "
<< i - kDropFrameThreshTestStep;
last_drop = first_drop_;
}
}
TEST_P(DatarateTestLarge, DropFramesMultiThreads) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 30;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_threads = 2;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
cfg_.rc_target_bitrate = 200;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
class DatarateTestRealTime : public DatarateTestLarge {
public:
virtual ~DatarateTestRealTime() {}
};
#if CONFIG_TEMPORAL_DENOISING
// Check basic datarate targeting, for a single bitrate, but loop over the
// various denoiser settings.
TEST_P(DatarateTestRealTime, DenoiserLevels) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
for (int j = 1; j < 5; ++j) {
// Run over the denoiser levels.
// For the temporal denoiser (#if CONFIG_TEMPORAL_DENOISING) the level j
// refers to the 4 denoiser modes: denoiserYonly, denoiserOnYUV,
// denoiserOnAggressive, and denoiserOnAdaptive.
denoiser_on_ = j;
cfg_.rc_target_bitrate = 300;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
}
// Check basic datarate targeting, for a single bitrate, when denoiser is off
// and on.
TEST_P(DatarateTestRealTime, DenoiserOffOn) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 299);
cfg_.rc_target_bitrate = 300;
ResetModel();
// The denoiser is off by default.
denoiser_on_ = 0;
// Set the offon test flag.
denoiser_offon_test_ = 1;
denoiser_offon_period_ = 100;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
#endif // CONFIG_TEMPORAL_DENOISING
TEST_P(DatarateTestRealTime, BasicBufferModel) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
// 2 pass cbr datarate control has a bug hidden by the small # of
// frames selected in this encode. The problem is that even if the buffer is
// negative we produce a keyframe on a cutscene, ignoring datarate
// constraints
// TODO(jimbankoski): Fix when issue
// http://bugs.chromium.org/p/webm/issues/detail?id=495 is addressed.
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
// There is an issue for low bitrates in real-time mode, where the
// effective_datarate slightly overshoots the target bitrate.
// This is same the issue as noted above (#495).
// TODO(jimbankoski/marpan): Update test to run for lower bitrates (< 100),
// when the issue is resolved.
for (int i = 100; i <= 700; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
}
TEST_P(DatarateTestRealTime, ChangingDropFrameThresh) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_max_quantizer = 36;
cfg_.rc_end_usage = VPX_CBR;
cfg_.rc_target_bitrate = 200;
cfg_.kf_mode = VPX_KF_DISABLED;
const int frame_count = 40;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, frame_count);
// Check that the first dropped frame gets earlier and earlier
// as the drop frame threshold is increased.
const int kDropFrameThreshTestStep = 30;
vpx_codec_pts_t last_drop = frame_count;
for (int i = 1; i < 91; i += kDropFrameThreshTestStep) {
cfg_.rc_dropframe_thresh = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_LE(first_drop_, last_drop)
<< " The first dropped frame for drop_thresh " << i
<< " > first dropped frame for drop_thresh "
<< i - kDropFrameThreshTestStep;
last_drop = first_drop_;
}
}
TEST_P(DatarateTestRealTime, DropFramesMultiThreads) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 30;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
// Encode using multiple threads.
cfg_.g_threads = 2;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
cfg_.rc_target_bitrate = 200;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
TEST_P(DatarateTestRealTime, RegionOfInterest) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 0;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
// Encode using multiple threads.
cfg_.g_threads = 2;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 300);
cfg_.rc_target_bitrate = 450;
cfg_.g_w = 352;
cfg_.g_h = 288;
ResetModel();
// Set ROI parameters
use_roi_ = 1;
memset(&roi_, 0, sizeof(roi_));
roi_.rows = (cfg_.g_h + 15) / 16;
roi_.cols = (cfg_.g_w + 15) / 16;
roi_.delta_q[0] = 0;
roi_.delta_q[1] = -20;
roi_.delta_q[2] = 0;
roi_.delta_q[3] = 0;
roi_.delta_lf[0] = 0;
roi_.delta_lf[1] = -20;
roi_.delta_lf[2] = 0;
roi_.delta_lf[3] = 0;
roi_.static_threshold[0] = 0;
roi_.static_threshold[1] = 1000;
roi_.static_threshold[2] = 0;
roi_.static_threshold[3] = 0;
// Use 2 states: 1 is center square, 0 is the rest.
roi_.roi_map =
(uint8_t *)calloc(roi_.rows * roi_.cols, sizeof(*roi_.roi_map));
for (unsigned int i = 0; i < roi_.rows; ++i) {
for (unsigned int j = 0; j < roi_.cols; ++j) {
if (i > (roi_.rows >> 2) && i < ((roi_.rows * 3) >> 2) &&
j > (roi_.cols >> 2) && j < ((roi_.cols * 3) >> 2)) {
roi_.roi_map[i * roi_.cols + j] = 1;
}
}
}
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
free(roi_.roi_map);
}
TEST_P(DatarateTestRealTime, GFBoost) {
denoiser_on_ = 0;
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_dropframe_thresh = 0;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_error_resilient = 0;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 300);
cfg_.rc_target_bitrate = 300;
ResetModel();
// Apply a gf boost.
gf_boost_ = 50;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_ * 0.95)
<< " The datarate for the file exceeds the target!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.4)
<< " The datarate for the file missed the target!";
}
class DatarateTestVP9Large
: public ::libvpx_test::EncoderTest,
public ::libvpx_test::CodecTestWith2Params<libvpx_test::TestMode, int> {
public:
DatarateTestVP9Large() : EncoderTest(GET_PARAM(0)) {}
protected:
virtual ~DatarateTestVP9Large() {}
virtual void SetUp() {
InitializeConfig();
SetMode(GET_PARAM(1));
set_cpu_used_ = GET_PARAM(2);
ResetModel();
}
virtual void ResetModel() {
last_pts_ = 0;
bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
frame_number_ = 0;
tot_frame_number_ = 0;
first_drop_ = 0;
num_drops_ = 0;
// Denoiser is off by default.
denoiser_on_ = 0;
// For testing up to 3 layers.
for (int i = 0; i < 3; ++i) {
bits_total_[i] = 0;
}
denoiser_offon_test_ = 0;
denoiser_offon_period_ = -1;
frame_parallel_decoding_mode_ = 1;
}
//
// Frame flags and layer id for temporal layers.
//
// For two layers, test pattern is:
// 1 3
// 0 2 .....
// For three layers, test pattern is:
// 1 3 5 7
// 2 6
// 0 4 ....
// LAST is always update on base/layer 0, GOLDEN is updated on layer 1.
// For this 3 layer example, the 2nd enhancement layer (layer 2) updates
// the altref frame.
int SetFrameFlags(int frame_num, int num_temp_layers) {
int frame_flags = 0;
if (num_temp_layers == 2) {
if (frame_num % 2 == 0) {
// Layer 0: predict from L and ARF, update L.
frame_flags =
VP8_EFLAG_NO_REF_GF | VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF;
} else {
// Layer 1: predict from L, G and ARF, and update G.
frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST |
VP8_EFLAG_NO_UPD_ENTROPY;
}
} else if (num_temp_layers == 3) {
if (frame_num % 4 == 0) {
// Layer 0: predict from L and ARF; update L.
frame_flags =
VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_REF_GF;
} else if ((frame_num - 2) % 4 == 0) {
// Layer 1: predict from L, G, ARF; update G.
frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST;
} else if ((frame_num - 1) % 2 == 0) {
// Layer 2: predict from L, G, ARF; update ARF.
frame_flags = VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_LAST;
}
}
return frame_flags;
}
int SetLayerId(int frame_num, int num_temp_layers) {
int layer_id = 0;
if (num_temp_layers == 2) {
if (frame_num % 2 == 0) {
layer_id = 0;
} else {
layer_id = 1;
}
} else if (num_temp_layers == 3) {
if (frame_num % 4 == 0) {
layer_id = 0;
} else if ((frame_num - 2) % 4 == 0) {
layer_id = 1;
} else if ((frame_num - 1) % 2 == 0) {
layer_id = 2;
}
}
return layer_id;
}
virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video,
::libvpx_test::Encoder *encoder) {
if (video->frame() == 0) encoder->Control(VP8E_SET_CPUUSED, set_cpu_used_);
if (denoiser_offon_test_) {
ASSERT_GT(denoiser_offon_period_, 0)
<< "denoiser_offon_period_ is not positive.";
if ((video->frame() + 1) % denoiser_offon_period_ == 0) {
// Flip denoiser_on_ periodically
denoiser_on_ ^= 1;
}
}
encoder->Control(VP9E_SET_NOISE_SENSITIVITY, denoiser_on_);
encoder->Control(VP9E_SET_TILE_COLUMNS, (cfg_.g_threads >> 1));
encoder->Control(VP9E_SET_FRAME_PARALLEL_DECODING,
frame_parallel_decoding_mode_);
if (cfg_.ts_number_layers > 1) {
if (video->frame() == 0) {
encoder->Control(VP9E_SET_SVC, 1);
}
vpx_svc_layer_id_t layer_id;
layer_id.spatial_layer_id = 0;
frame_flags_ = SetFrameFlags(video->frame(), cfg_.ts_number_layers);
layer_id.temporal_layer_id =
SetLayerId(video->frame(), cfg_.ts_number_layers);
encoder->Control(VP9E_SET_SVC_LAYER_ID, &layer_id);
}
const vpx_rational_t tb = video->timebase();
timebase_ = static_cast<double>(tb.num) / tb.den;
duration_ = 0;
}
virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) {
// Time since last timestamp = duration.
vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
if (duration > 1) {
// If first drop not set and we have a drop set it to this time.
if (!first_drop_) first_drop_ = last_pts_ + 1;
// Update the number of frame drops.
num_drops_ += static_cast<int>(duration - 1);
// Update counter for total number of frames (#frames input to encoder).
// Needed for setting the proper layer_id below.
tot_frame_number_ += static_cast<int>(duration - 1);
}
int layer = SetLayerId(tot_frame_number_, cfg_.ts_number_layers);
// Add to the buffer the bits we'd expect from a constant bitrate server.
bits_in_buffer_model_ += static_cast<int64_t>(
duration * timebase_ * cfg_.rc_target_bitrate * 1000);
// Buffer should not go negative.
ASSERT_GE(bits_in_buffer_model_, 0)
<< "Buffer Underrun at frame " << pkt->data.frame.pts;
const size_t frame_size_in_bits = pkt->data.frame.sz * 8;
// Update the total encoded bits. For temporal layers, update the cumulative
// encoded bits per layer.
for (int i = layer; i < static_cast<int>(cfg_.ts_number_layers); ++i) {
bits_total_[i] += frame_size_in_bits;
}
// Update the most recent pts.
last_pts_ = pkt->data.frame.pts;
++frame_number_;
++tot_frame_number_;
}
virtual void EndPassHook(void) {
for (int layer = 0; layer < static_cast<int>(cfg_.ts_number_layers);
++layer) {
duration_ = (last_pts_ + 1) * timebase_;
if (bits_total_[layer]) {
// Effective file datarate:
effective_datarate_[layer] = (bits_total_[layer] / 1000.0) / duration_;
}
}
}
vpx_codec_pts_t last_pts_;
double timebase_;
int frame_number_; // Counter for number of non-dropped/encoded frames.
int tot_frame_number_; // Counter for total number of input frames.
int64_t bits_total_[3];
double duration_;
double effective_datarate_[3];
int set_cpu_used_;
int64_t bits_in_buffer_model_;
vpx_codec_pts_t first_drop_;
int num_drops_;
int denoiser_on_;
int denoiser_offon_test_;
int denoiser_offon_period_;
int frame_parallel_decoding_mode_;
};
// Check basic rate targeting for VBR mode with 0 lag.
TEST_P(DatarateTestVP9Large, BasicRateTargetingVBRLagZero) {
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.g_error_resilient = 0;
cfg_.rc_end_usage = VPX_VBR;
cfg_.g_lag_in_frames = 0;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 300);
for (int i = 400; i <= 800; i += 400) {
cfg_.rc_target_bitrate = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.75)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.30)
<< " The datarate for the file is greater than target by too much!";
}
}
// Check basic rate targeting for VBR mode with non-zero lag.
TEST_P(DatarateTestVP9Large, BasicRateTargetingVBRLagNonZero) {
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.g_error_resilient = 0;
cfg_.rc_end_usage = VPX_VBR;
// For non-zero lag, rate control will work (be within bounds) for
// real-time mode.
if (deadline_ == VPX_DL_REALTIME) {
cfg_.g_lag_in_frames = 15;
} else {
cfg_.g_lag_in_frames = 0;
}
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 300);
for (int i = 400; i <= 800; i += 400) {
cfg_.rc_target_bitrate = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.75)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.30)
<< " The datarate for the file is greater than target by too much!";
}
}
// Check basic rate targeting for VBR mode with non-zero lag, with
// frame_parallel_decoding_mode off. This enables the adapt_coeff/mode/mv probs
// since error_resilience is off.
TEST_P(DatarateTestVP9Large, BasicRateTargetingVBRLagNonZeroFrameParDecOff) {
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.g_error_resilient = 0;
cfg_.rc_end_usage = VPX_VBR;
// For non-zero lag, rate control will work (be within bounds) for
// real-time mode.
if (deadline_ == VPX_DL_REALTIME) {
cfg_.g_lag_in_frames = 15;
} else {
cfg_.g_lag_in_frames = 0;
}
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 300);
for (int i = 400; i <= 800; i += 400) {
cfg_.rc_target_bitrate = i;
ResetModel();
frame_parallel_decoding_mode_ = 0;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.75)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.30)
<< " The datarate for the file is greater than target by too much!";
}
}
// Check basic rate targeting for CBR mode.
TEST_P(DatarateTestVP9Large, BasicRateTargeting) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
for (int i = 150; i < 800; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
<< " The datarate for the file is greater than target by too much!";
}
}
// Check basic rate targeting for CBR mode, with frame_parallel_decoding_mode
// off( and error_resilience off).
TEST_P(DatarateTestVP9Large, BasicRateTargetingFrameParDecOff) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.g_error_resilient = 0;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
for (int i = 150; i < 800; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
frame_parallel_decoding_mode_ = 0;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
<< " The datarate for the file is greater than target by too much!";
}
}
// Check basic rate targeting for CBR mode, with 2 threads and dropped frames.
TEST_P(DatarateTestVP9Large, BasicRateTargetingDropFramesMultiThreads) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 30;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
// Encode using multiple threads.
cfg_.g_threads = 2;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
cfg_.rc_target_bitrate = 200;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
<< " The datarate for the file is greater than target by too much!";
}
// Check basic rate targeting for CBR.
TEST_P(DatarateTestVP9Large, BasicRateTargeting444) {
::libvpx_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140);
cfg_.g_profile = 1;
cfg_.g_timebase = video.timebase();
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
for (int i = 250; i < 900; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate),
effective_datarate_[0] * 0.80)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate),
effective_datarate_[0] * 1.15)
<< " The datarate for the file missed the target!"
<< cfg_.rc_target_bitrate << " " << effective_datarate_;
}
}
// Check that (1) the first dropped frame gets earlier and earlier
// as the drop frame threshold is increased, and (2) that the total number of
// frame drops does not decrease as we increase frame drop threshold.
// Use a lower qp-max to force some frame drops.
TEST_P(DatarateTestVP9Large, ChangingDropFrameThresh) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_undershoot_pct = 20;
cfg_.rc_undershoot_pct = 20;
cfg_.rc_dropframe_thresh = 10;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 50;
cfg_.rc_end_usage = VPX_CBR;
cfg_.rc_target_bitrate = 200;
cfg_.g_lag_in_frames = 0;
// TODO(marpan): Investigate datarate target failures with a smaller keyframe
// interval (128).
cfg_.kf_max_dist = 9999;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
const int kDropFrameThreshTestStep = 30;
for (int j = 50; j <= 150; j += 100) {
cfg_.rc_target_bitrate = j;
vpx_codec_pts_t last_drop = 140;
int last_num_drops = 0;
for (int i = 10; i < 100; i += kDropFrameThreshTestStep) {
cfg_.rc_dropframe_thresh = i;
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.25)
<< " The datarate for the file is greater than target by too much!";
ASSERT_LE(first_drop_, last_drop)
<< " The first dropped frame for drop_thresh " << i
<< " > first dropped frame for drop_thresh "
<< i - kDropFrameThreshTestStep;
ASSERT_GE(num_drops_, last_num_drops * 0.85)
<< " The number of dropped frames for drop_thresh " << i
<< " < number of dropped frames for drop_thresh "
<< i - kDropFrameThreshTestStep;
last_drop = first_drop_;
last_num_drops = num_drops_;
}
}
}
// Check basic rate targeting for 2 temporal layers.
TEST_P(DatarateTestVP9Large, BasicRateTargeting2TemporalLayers) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
// 2 Temporal layers, no spatial layers: Framerate decimation (2, 1).
cfg_.ss_number_layers = 1;
cfg_.ts_number_layers = 2;
cfg_.ts_rate_decimator[0] = 2;
cfg_.ts_rate_decimator[1] = 1;
cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS;
if (deadline_ == VPX_DL_REALTIME) cfg_.g_error_resilient = 1;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 200);
for (int i = 200; i <= 800; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
// 60-40 bitrate allocation for 2 temporal layers.
cfg_.layer_target_bitrate[0] = 60 * cfg_.rc_target_bitrate / 100;
cfg_.layer_target_bitrate[1] = cfg_.rc_target_bitrate;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) {
ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.85)
<< " The datarate for the file is lower than target by too much, "
"for layer: "
<< j;
ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.15)
<< " The datarate for the file is greater than target by too much, "
"for layer: "
<< j;
}
}
}
// Check basic rate targeting for 3 temporal layers.
TEST_P(DatarateTestVP9Large, BasicRateTargeting3TemporalLayers) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
// 3 Temporal layers, no spatial layers: Framerate decimation (4, 2, 1).
cfg_.ss_number_layers = 1;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 200);
for (int i = 200; i <= 800; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
// 40-20-40 bitrate allocation for 3 temporal layers.
cfg_.layer_target_bitrate[0] = 40 * cfg_.rc_target_bitrate / 100;
cfg_.layer_target_bitrate[1] = 60 * cfg_.rc_target_bitrate / 100;
cfg_.layer_target_bitrate[2] = cfg_.rc_target_bitrate;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) {
// TODO(yaowu): Work out more stable rc control strategy and
// Adjust the thresholds to be tighter than .75.
ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.75)
<< " The datarate for the file is lower than target by too much, "
"for layer: "
<< j;
// TODO(yaowu): Work out more stable rc control strategy and
// Adjust the thresholds to be tighter than 1.25.
ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.25)
<< " The datarate for the file is greater than target by too much, "
"for layer: "
<< j;
}
}
}
// Check basic rate targeting for 3 temporal layers, with frame dropping.
// Only for one (low) bitrate with lower max_quantizer, and somewhat higher
// frame drop threshold, to force frame dropping.
TEST_P(DatarateTestVP9Large, BasicRateTargeting3TemporalLayersFrameDropping) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
// Set frame drop threshold and rc_max_quantizer to force some frame drops.
cfg_.rc_dropframe_thresh = 20;
cfg_.rc_max_quantizer = 45;
cfg_.rc_min_quantizer = 0;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
// 3 Temporal layers, no spatial layers: Framerate decimation (4, 2, 1).
cfg_.ss_number_layers = 1;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 200);
cfg_.rc_target_bitrate = 200;
ResetModel();
// 40-20-40 bitrate allocation for 3 temporal layers.
cfg_.layer_target_bitrate[0] = 40 * cfg_.rc_target_bitrate / 100;
cfg_.layer_target_bitrate[1] = 60 * cfg_.rc_target_bitrate / 100;
cfg_.layer_target_bitrate[2] = cfg_.rc_target_bitrate;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) {
ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.85)
<< " The datarate for the file is lower than target by too much, "
"for layer: "
<< j;
ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.15)
<< " The datarate for the file is greater than target by too much, "
"for layer: "
<< j;
// Expect some frame drops in this test: for this 200 frames test,
// expect at least 10% and not more than 60% drops.
ASSERT_GE(num_drops_, 20);
ASSERT_LE(num_drops_, 130);
}
}
#if CONFIG_VP9_TEMPORAL_DENOISING
class DatarateTestVP9LargeDenoiser : public DatarateTestVP9Large {
public:
virtual ~DatarateTestVP9LargeDenoiser() {}
};
// Check basic datarate targeting, for a single bitrate, when denoiser is on.
TEST_P(DatarateTestVP9LargeDenoiser, LowNoise) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 2;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 140);
// For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING),
// there is only one denoiser mode: denoiserYonly(which is 1),
// but may add more modes in the future.
cfg_.rc_target_bitrate = 300;
ResetModel();
// Turn on the denoiser.
denoiser_on_ = 1;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
<< " The datarate for the file is greater than target by too much!";
}
// Check basic datarate targeting, for a single bitrate, when denoiser is on,
// for clip with high noise level. Use 2 threads.
TEST_P(DatarateTestVP9LargeDenoiser, HighNoise) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 2;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.g_threads = 2;
::libvpx_test::Y4mVideoSource video("noisy_clip_640_360.y4m", 0, 200);
// For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING),
// there is only one denoiser mode: kDenoiserOnYOnly(which is 1),
// but may add more modes in the future.
cfg_.rc_target_bitrate = 1000;
ResetModel();
// Turn on the denoiser.
denoiser_on_ = 1;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
<< " The datarate for the file is greater than target by too much!";
}
// Check basic datarate targeting, for a single bitrate, when denoiser is on,
// for 1280x720 clip with 4 threads.
TEST_P(DatarateTestVP9LargeDenoiser, 4threads) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 2;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.g_threads = 4;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
// For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING),
// there is only one denoiser mode: denoiserYonly(which is 1),
// but may add more modes in the future.
cfg_.rc_target_bitrate = 1000;
ResetModel();
// Turn on the denoiser.
denoiser_on_ = 1;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.29)
<< " The datarate for the file is greater than target by too much!";
}
// Check basic datarate targeting, for a single bitrate, when denoiser is off
// and on.
TEST_P(DatarateTestVP9LargeDenoiser, DenoiserOffOn) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_dropframe_thresh = 1;
cfg_.rc_min_quantizer = 2;
cfg_.rc_max_quantizer = 56;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 299);
// For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING),
// there is only one denoiser mode: denoiserYonly(which is 1),
// but may add more modes in the future.
cfg_.rc_target_bitrate = 300;
ResetModel();
// The denoiser is off by default.
denoiser_on_ = 0;
// Set the offon test flag.
denoiser_offon_test_ = 1;
denoiser_offon_period_ = 100;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85)
<< " The datarate for the file is lower than target by too much!";
ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15)
<< " The datarate for the file is greater than target by too much!";
}
#endif // CONFIG_VP9_TEMPORAL_DENOISING
class DatarateOnePassCbrSvc
: public ::libvpx_test::EncoderTest,
public ::libvpx_test::CodecTestWith2Params<libvpx_test::TestMode, int> {
public:
DatarateOnePassCbrSvc() : EncoderTest(GET_PARAM(0)) {
memset(&svc_params_, 0, sizeof(svc_params_));
}
virtual ~DatarateOnePassCbrSvc() {}
protected:
virtual void SetUp() {
InitializeConfig();
SetMode(GET_PARAM(1));
speed_setting_ = GET_PARAM(2);
ResetModel();
}
virtual void ResetModel() {
last_pts_ = 0;
bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz;
frame_number_ = 0;
first_drop_ = 0;
bits_total_ = 0;
duration_ = 0.0;
mismatch_psnr_ = 0.0;
mismatch_nframes_ = 0;
denoiser_on_ = 0;
tune_content_ = 0;
base_speed_setting_ = 5;
}
virtual void BeginPassHook(unsigned int /*pass*/) {}
virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video,
::libvpx_test::Encoder *encoder) {
if (video->frame() == 0) {
int i;
for (i = 0; i < VPX_MAX_LAYERS; ++i) {
svc_params_.max_quantizers[i] = 63;
svc_params_.min_quantizers[i] = 0;
}
svc_params_.speed_per_layer[0] = base_speed_setting_;
for (i = 1; i < VPX_SS_MAX_LAYERS; ++i) {
svc_params_.speed_per_layer[i] = speed_setting_;
}
encoder->Control(VP9E_SET_NOISE_SENSITIVITY, denoiser_on_);
encoder->Control(VP9E_SET_SVC, 1);
encoder->Control(VP9E_SET_SVC_PARAMETERS, &svc_params_);
encoder->Control(VP8E_SET_CPUUSED, speed_setting_);
encoder->Control(VP9E_SET_TILE_COLUMNS, 0);
encoder->Control(VP8E_SET_MAX_INTRA_BITRATE_PCT, 300);
encoder->Control(VP9E_SET_TILE_COLUMNS, (cfg_.g_threads >> 1));
encoder->Control(VP9E_SET_ROW_MT, 1);
encoder->Control(VP8E_SET_STATIC_THRESHOLD, 1);
encoder->Control(VP9E_SET_TUNE_CONTENT, tune_content_);
}
const vpx_rational_t tb = video->timebase();
timebase_ = static_cast<double>(tb.num) / tb.den;
duration_ = 0;
}
virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) {
vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_;
if (last_pts_ == 0) duration = 1;
bits_in_buffer_model_ += static_cast<int64_t>(
duration * timebase_ * cfg_.rc_target_bitrate * 1000);
const bool key_frame =
(pkt->data.frame.flags & VPX_FRAME_IS_KEY) ? true : false;
if (!key_frame) {
// TODO(marpan): This check currently fails for some of the SVC tests,
// re-enable when issue (webm:1350) is resolved.
// ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame "
// << pkt->data.frame.pts;
}
const size_t frame_size_in_bits = pkt->data.frame.sz * 8;
bits_in_buffer_model_ -= static_cast<int64_t>(frame_size_in_bits);
bits_total_ += frame_size_in_bits;
if (!first_drop_ && duration > 1) first_drop_ = last_pts_ + 1;
last_pts_ = pkt->data.frame.pts;
bits_in_last_frame_ = frame_size_in_bits;
++frame_number_;
}
virtual void EndPassHook(void) {
if (bits_total_) {
const double file_size_in_kb = bits_total_ / 1000.; // bits per kilobit
duration_ = (last_pts_ + 1) * timebase_;
file_datarate_ = file_size_in_kb / duration_;
}
}
virtual void MismatchHook(const vpx_image_t *img1, const vpx_image_t *img2) {
double mismatch_psnr = compute_psnr(img1, img2);
mismatch_psnr_ += mismatch_psnr;
++mismatch_nframes_;
}
unsigned int GetMismatchFrames() { return mismatch_nframes_; }
vpx_codec_pts_t last_pts_;
int64_t bits_in_buffer_model_;
double timebase_;
int frame_number_;
vpx_codec_pts_t first_drop_;
int64_t bits_total_;
double duration_;
double file_datarate_;
size_t bits_in_last_frame_;
vpx_svc_extra_cfg_t svc_params_;
int speed_setting_;
double mismatch_psnr_;
int mismatch_nframes_;
int denoiser_on_;
int tune_content_;
int base_speed_setting_;
};
static void assign_layer_bitrates(vpx_codec_enc_cfg_t *const enc_cfg,
const vpx_svc_extra_cfg_t *svc_params,
int spatial_layers, int temporal_layers,
int temporal_layering_mode) {
int sl, spatial_layer_target;
float total = 0;
float alloc_ratio[VPX_MAX_LAYERS] = { 0 };
for (sl = 0; sl < spatial_layers; ++sl) {
if (svc_params->scaling_factor_den[sl] > 0) {
alloc_ratio[sl] = (float)(svc_params->scaling_factor_num[sl] * 1.0 /
svc_params->scaling_factor_den[sl]);
total += alloc_ratio[sl];
}
}
for (sl = 0; sl < spatial_layers; ++sl) {
enc_cfg->ss_target_bitrate[sl] = spatial_layer_target =
(unsigned int)(enc_cfg->rc_target_bitrate * alloc_ratio[sl] / total);
const int index = sl * temporal_layers;
if (temporal_layering_mode == 3) {
enc_cfg->layer_target_bitrate[index] = spatial_layer_target >> 1;
enc_cfg->layer_target_bitrate[index + 1] =
(spatial_layer_target >> 1) + (spatial_layer_target >> 2);
enc_cfg->layer_target_bitrate[index + 2] = spatial_layer_target;
} else if (temporal_layering_mode == 2) {
enc_cfg->layer_target_bitrate[index] = spatial_layer_target * 2 / 3;
enc_cfg->layer_target_bitrate[index + 1] = spatial_layer_target;
}
}
}
// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and 1
// temporal layer, with screen content mode on and same speed setting for all
// layers.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL1TLScreenContent1) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 2;
cfg_.ts_number_layers = 1;
cfg_.ts_rate_decimator[0] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 1;
cfg_.temporal_layering_mode = 0;
svc_params_.scaling_factor_num[0] = 144;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 288;
svc_params_.scaling_factor_den[1] = 288;
cfg_.rc_dropframe_thresh = 10;
cfg_.kf_max_dist = 9999;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
cfg_.rc_target_bitrate = 500;
ResetModel();
tune_content_ = 1;
base_speed_setting_ = speed_setting_;
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
}
// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and
// 3 temporal layers. Run CIF clip with 1 thread.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL3TL) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 2;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 1;
cfg_.temporal_layering_mode = 3;
svc_params_.scaling_factor_num[0] = 144;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 288;
svc_params_.scaling_factor_den[1] = 288;
cfg_.rc_dropframe_thresh = 0;
cfg_.kf_max_dist = 9999;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 200);
// TODO(marpan): Check that effective_datarate for each layer hits the
// layer target_bitrate.
for (int i = 200; i <= 800; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.78)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
<< " The datarate for the file is lower than the target by too much!";
#if CONFIG_VP9_DECODER
// Number of temporal layers > 1, so half of the frames in this SVC pattern
// will be non-reference frame and hence encoder will avoid loopfilter.
// Since frame dropper is off, we can expcet 100 (half of the sequence)
// mismatched frames.
EXPECT_EQ(static_cast<unsigned int>(100), GetMismatchFrames());
#endif
}
}
// Check basic rate targeting for 1 pass CBR SVC with denoising.
// 2 spatial layers and 3 temporal layer. Run HD clip with 2 threads.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL3TLDenoiserOn) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 2;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 2;
cfg_.temporal_layering_mode = 3;
svc_params_.scaling_factor_num[0] = 144;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 288;
svc_params_.scaling_factor_den[1] = 288;
cfg_.rc_dropframe_thresh = 0;
cfg_.kf_max_dist = 9999;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
// TODO(marpan): Check that effective_datarate for each layer hits the
// layer target_bitrate.
for (int i = 600; i <= 1000; i += 200) {
cfg_.rc_target_bitrate = i;
ResetModel();
denoiser_on_ = 1;
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.78)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
<< " The datarate for the file is lower than the target by too much!";
#if CONFIG_VP9_DECODER
// Number of temporal layers > 1, so half of the frames in this SVC pattern
// will be non-reference frame and hence encoder will avoid loopfilter.
// Since frame dropper is off, we can expcet 150 (half of the sequence)
// mismatched frames.
EXPECT_EQ(static_cast<unsigned int>(150), GetMismatchFrames());
#endif
}
}
// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and 3
// temporal layers. Run CIF clip with 1 thread, and few short key frame periods.
TEST_P(DatarateOnePassCbrSvc, DISABLED_OnePassCbrSvc2SL3TLSmallKf) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 2;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 1;
cfg_.temporal_layering_mode = 3;
svc_params_.scaling_factor_num[0] = 144;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 288;
svc_params_.scaling_factor_den[1] = 288;
cfg_.rc_dropframe_thresh = 10;
::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288,
30, 1, 0, 200);
cfg_.rc_target_bitrate = 400;
// For this 3 temporal layer case, pattern repeats every 4 frames, so choose
// 4 key neighboring key frame periods (so key frame will land on 0-2-1-2).
for (int j = 64; j <= 67; j++) {
cfg_.kf_max_dist = j;
ResetModel();
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.80)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
<< " The datarate for the file is lower than the target by too much!";
}
}
// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and
// 3 temporal layers. Run HD clip with 4 threads.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL3TL4Threads) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 2;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 4;
cfg_.temporal_layering_mode = 3;
svc_params_.scaling_factor_num[0] = 144;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 288;
svc_params_.scaling_factor_den[1] = 288;
cfg_.rc_dropframe_thresh = 0;
cfg_.kf_max_dist = 9999;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
cfg_.rc_target_bitrate = 800;
ResetModel();
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.78)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.15)
<< " The datarate for the file is lower than the target by too much!";
#if CONFIG_VP9_DECODER
// Number of temporal layers > 1, so half of the frames in this SVC pattern
// will be non-reference frame and hence encoder will avoid loopfilter.
// Since frame dropper is off, we can expcet 150 (half of the sequence)
// mismatched frames.
EXPECT_EQ(static_cast<unsigned int>(150), GetMismatchFrames());
#endif
}
// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and
// 3 temporal layers. Run CIF clip with 1 thread.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL3TL) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 3;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 1;
cfg_.temporal_layering_mode = 3;
svc_params_.scaling_factor_num[0] = 72;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 144;
svc_params_.scaling_factor_den[1] = 288;
svc_params_.scaling_factor_num[2] = 288;
svc_params_.scaling_factor_den[2] = 288;
cfg_.rc_dropframe_thresh = 0;
cfg_.kf_max_dist = 9999;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
cfg_.rc_target_bitrate = 800;
ResetModel();
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.78)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.22)
<< " The datarate for the file is lower than the target by too much!";
#if CONFIG_VP9_DECODER
// Number of temporal layers > 1, so half of the frames in this SVC pattern
// will be non-reference frame and hence encoder will avoid loopfilter.
// Since frame dropper is off, we can expcet 150 (half of the sequence)
// mismatched frames.
EXPECT_EQ(static_cast<unsigned int>(150), GetMismatchFrames());
#endif
}
// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and 3
// temporal layers. Run CIF clip with 1 thread, and few short key frame periods.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL3TLSmallKf) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 3;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 1;
cfg_.temporal_layering_mode = 3;
svc_params_.scaling_factor_num[0] = 72;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 144;
svc_params_.scaling_factor_den[1] = 288;
svc_params_.scaling_factor_num[2] = 288;
svc_params_.scaling_factor_den[2] = 288;
cfg_.rc_dropframe_thresh = 10;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
cfg_.rc_target_bitrate = 800;
// For this 3 temporal layer case, pattern repeats every 4 frames, so choose
// 4 key neighboring key frame periods (so key frame will land on 0-2-1-2).
for (int j = 32; j <= 35; j++) {
cfg_.kf_max_dist = j;
ResetModel();
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.80)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.30)
<< " The datarate for the file is lower than the target by too much!";
}
}
// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and
// 3 temporal layers. Run HD clip with 4 threads.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL3TL4threads) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 3;
cfg_.ts_number_layers = 3;
cfg_.ts_rate_decimator[0] = 4;
cfg_.ts_rate_decimator[1] = 2;
cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 4;
cfg_.temporal_layering_mode = 3;
svc_params_.scaling_factor_num[0] = 72;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 144;
svc_params_.scaling_factor_den[1] = 288;
svc_params_.scaling_factor_num[2] = 288;
svc_params_.scaling_factor_den[2] = 288;
cfg_.rc_dropframe_thresh = 0;
cfg_.kf_max_dist = 9999;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
cfg_.rc_target_bitrate = 800;
ResetModel();
assign_layer_bitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
ASSERT_GE(cfg_.rc_target_bitrate, file_datarate_ * 0.78)
<< " The datarate for the file exceeds the target by too much!";
ASSERT_LE(cfg_.rc_target_bitrate, file_datarate_ * 1.22)
<< " The datarate for the file is lower than the target by too much!";
#if CONFIG_VP9_DECODER
// Number of temporal layers > 1, so half of the frames in this SVC pattern
// will be non-reference frame and hence encoder will avoid loopfilter.
// Since frame dropper is off, we can expcet 150 (half of the sequence)
// mismatched frames.
EXPECT_EQ(static_cast<unsigned int>(150), GetMismatchFrames());
#endif
}
// Run SVC encoder for 1 temporal layer, 2 spatial layers, with spatial
// downscale 5x5.
TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL1TL5x5MultipleRuns) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_min_quantizer = 0;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 2;
cfg_.ts_number_layers = 1;
cfg_.ts_rate_decimator[0] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 3;
cfg_.temporal_layering_mode = 0;
svc_params_.scaling_factor_num[0] = 256;
svc_params_.scaling_factor_den[0] = 1280;
svc_params_.scaling_factor_num[1] = 1280;
svc_params_.scaling_factor_den[1] = 1280;
cfg_.rc_dropframe_thresh = 10;
cfg_.kf_max_dist = 999999;
cfg_.kf_min_dist = 0;
cfg_.ss_target_bitrate[0] = 300;
cfg_.ss_target_bitrate[1] = 1400;
cfg_.layer_target_bitrate[0] = 300;
cfg_.layer_target_bitrate[1] = 1400;
cfg_.rc_target_bitrate = 1700;
::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300);
ResetModel();
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
EXPECT_EQ(static_cast<unsigned int>(0), GetMismatchFrames());
}
VP8_INSTANTIATE_TEST_CASE(DatarateTestLarge, ALL_TEST_MODES,
::testing::Values(0));
VP8_INSTANTIATE_TEST_CASE(DatarateTestRealTime,
::testing::Values(::libvpx_test::kRealTime),
::testing::Values(-6, -12));
VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9Large,
::testing::Values(::libvpx_test::kOnePassGood,
::libvpx_test::kRealTime),
::testing::Range(2, 9));
#if CONFIG_VP9_TEMPORAL_DENOISING
VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9LargeDenoiser,
::testing::Values(::libvpx_test::kRealTime),
::testing::Range(5, 9));
#endif
VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvc,
::testing::Values(::libvpx_test::kRealTime),
::testing::Range(5, 9));
} // namespace