ref: 31fa91b4cdb86647092bcb2fc55d1b478362887e
dir: /test/vp9_datarate_test.cc/
/* * Copyright (c) 2012 The WebM project authors. All Rights Reserved. * * Use of this source code is governed by a BSD-style license * that can be found in the LICENSE file in the root of the source * tree. An additional intellectual property rights grant can be found * in the file PATENTS. All contributing project authors may * be found in the AUTHORS file in the root of the source tree. */ #include "./vpx_config.h" #include "third_party/googletest/src/include/gtest/gtest.h" #include "test/codec_factory.h" #include "test/encode_test_driver.h" #include "test/i420_video_source.h" #include "test/util.h" #include "test/y4m_video_source.h" #include "vpx/vpx_codec.h" #include "vpx_ports/bitops.h" namespace { class DatarateTestVP9 : public ::libvpx_test::EncoderTest { public: explicit DatarateTestVP9(const ::libvpx_test::CodecFactory *codec) : EncoderTest(codec) { tune_content_ = 0; } protected: virtual ~DatarateTestVP9() {} virtual void ResetModel() { last_pts_ = 0; bits_in_buffer_model_ = cfg_.rc_target_bitrate * cfg_.rc_buf_initial_sz; frame_number_ = 0; tot_frame_number_ = 0; first_drop_ = 0; num_drops_ = 0; aq_mode_ = 3; // Denoiser is off by default. denoiser_on_ = 0; // For testing up to 3 layers. for (int i = 0; i < 3; ++i) { bits_total_[i] = 0; } denoiser_offon_test_ = 0; denoiser_offon_period_ = -1; frame_parallel_decoding_mode_ = 1; delta_q_uv_ = 0; use_roi_ = false; } // // Frame flags and layer id for temporal layers. // // For two layers, test pattern is: // 1 3 // 0 2 ..... // For three layers, test pattern is: // 1 3 5 7 // 2 6 // 0 4 .... // LAST is always update on base/layer 0, GOLDEN is updated on layer 1. // For this 3 layer example, the 2nd enhancement layer (layer 2) updates // the altref frame. static int GetFrameFlags(int frame_num, int num_temp_layers) { int frame_flags = 0; if (num_temp_layers == 2) { if (frame_num % 2 == 0) { // Layer 0: predict from L and ARF, update L. frame_flags = VP8_EFLAG_NO_REF_GF | VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF; } else { // Layer 1: predict from L, G and ARF, and update G. frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST | VP8_EFLAG_NO_UPD_ENTROPY; } } else if (num_temp_layers == 3) { if (frame_num % 4 == 0) { // Layer 0: predict from L and ARF; update L. frame_flags = VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_REF_GF; } else if ((frame_num - 2) % 4 == 0) { // Layer 1: predict from L, G, ARF; update G. frame_flags = VP8_EFLAG_NO_UPD_ARF | VP8_EFLAG_NO_UPD_LAST; } else if ((frame_num - 1) % 2 == 0) { // Layer 2: predict from L, G, ARF; update ARF. frame_flags = VP8_EFLAG_NO_UPD_GF | VP8_EFLAG_NO_UPD_LAST; } } return frame_flags; } static int SetLayerId(int frame_num, int num_temp_layers) { int layer_id = 0; if (num_temp_layers == 2) { if (frame_num % 2 == 0) { layer_id = 0; } else { layer_id = 1; } } else if (num_temp_layers == 3) { if (frame_num % 4 == 0) { layer_id = 0; } else if ((frame_num - 2) % 4 == 0) { layer_id = 1; } else if ((frame_num - 1) % 2 == 0) { layer_id = 2; } } return layer_id; } virtual void PreEncodeFrameHook(::libvpx_test::VideoSource *video, ::libvpx_test::Encoder *encoder) { if (video->frame() == 0) { encoder->Control(VP8E_SET_CPUUSED, set_cpu_used_); encoder->Control(VP9E_SET_AQ_MODE, aq_mode_); encoder->Control(VP9E_SET_TUNE_CONTENT, tune_content_); } if (denoiser_offon_test_) { ASSERT_GT(denoiser_offon_period_, 0) << "denoiser_offon_period_ is not positive."; if ((video->frame() + 1) % denoiser_offon_period_ == 0) { // Flip denoiser_on_ periodically denoiser_on_ ^= 1; } } encoder->Control(VP9E_SET_NOISE_SENSITIVITY, denoiser_on_); encoder->Control(VP9E_SET_TILE_COLUMNS, get_msb(cfg_.g_threads)); encoder->Control(VP9E_SET_FRAME_PARALLEL_DECODING, frame_parallel_decoding_mode_); if (use_roi_) { encoder->Control(VP9E_SET_ROI_MAP, &roi_); encoder->Control(VP9E_SET_AQ_MODE, 0); } if (delta_q_uv_ != 0) { encoder->Control(VP9E_SET_DELTA_Q_UV, delta_q_uv_); } if (cfg_.ts_number_layers > 1) { if (video->frame() == 0) { encoder->Control(VP9E_SET_SVC, 1); } vpx_svc_layer_id_t layer_id; layer_id.spatial_layer_id = 0; frame_flags_ = GetFrameFlags(video->frame(), cfg_.ts_number_layers); layer_id.temporal_layer_id = SetLayerId(video->frame(), cfg_.ts_number_layers); layer_id.temporal_layer_id_per_spatial[0] = SetLayerId(video->frame(), cfg_.ts_number_layers); encoder->Control(VP9E_SET_SVC_LAYER_ID, &layer_id); } const vpx_rational_t tb = video->timebase(); timebase_ = static_cast<double>(tb.num) / tb.den; duration_ = 0; } virtual void FramePktHook(const vpx_codec_cx_pkt_t *pkt) { // Time since last timestamp = duration. vpx_codec_pts_t duration = pkt->data.frame.pts - last_pts_; if (duration > 1) { // If first drop not set and we have a drop set it to this time. if (!first_drop_) first_drop_ = last_pts_ + 1; // Update the number of frame drops. num_drops_ += static_cast<int>(duration - 1); // Update counter for total number of frames (#frames input to encoder). // Needed for setting the proper layer_id below. tot_frame_number_ += static_cast<int>(duration - 1); } int layer = SetLayerId(tot_frame_number_, cfg_.ts_number_layers); // Add to the buffer the bits we'd expect from a constant bitrate server. bits_in_buffer_model_ += static_cast<int64_t>( duration * timebase_ * cfg_.rc_target_bitrate * 1000); // Buffer should not go negative. ASSERT_GE(bits_in_buffer_model_, 0) << "Buffer Underrun at frame " << pkt->data.frame.pts; const size_t frame_size_in_bits = pkt->data.frame.sz * 8; // Update the total encoded bits. For temporal layers, update the cumulative // encoded bits per layer. for (int i = layer; i < static_cast<int>(cfg_.ts_number_layers); ++i) { bits_total_[i] += frame_size_in_bits; } // Update the most recent pts. last_pts_ = pkt->data.frame.pts; ++frame_number_; ++tot_frame_number_; } virtual void EndPassHook(void) { for (int layer = 0; layer < static_cast<int>(cfg_.ts_number_layers); ++layer) { duration_ = (last_pts_ + 1) * timebase_; if (bits_total_[layer]) { // Effective file datarate: effective_datarate_[layer] = (bits_total_[layer] / 1000.0) / duration_; } } } vpx_codec_pts_t last_pts_; double timebase_; int tune_content_; int frame_number_; // Counter for number of non-dropped/encoded frames. int tot_frame_number_; // Counter for total number of input frames. int64_t bits_total_[3]; double duration_; double effective_datarate_[3]; int set_cpu_used_; int64_t bits_in_buffer_model_; vpx_codec_pts_t first_drop_; int num_drops_; int aq_mode_; int denoiser_on_; int denoiser_offon_test_; int denoiser_offon_period_; int frame_parallel_decoding_mode_; int delta_q_uv_; bool use_roi_; vpx_roi_map_t roi_; }; // Params: test mode, speed setting and index for bitrate array. class DatarateTestVP9RealTimeMultiBR : public DatarateTestVP9, public ::libvpx_test::CodecTestWith2Params<int, int> { public: DatarateTestVP9RealTimeMultiBR() : DatarateTestVP9(GET_PARAM(0)) {} protected: virtual void SetUp() { InitializeConfig(); SetMode(::libvpx_test::kRealTime); set_cpu_used_ = GET_PARAM(1); ResetModel(); } }; // Params: speed setting and index for bitrate array. class DatarateTestVP9LargeVBR : public DatarateTestVP9, public ::libvpx_test::CodecTestWith2Params<int, int> { public: DatarateTestVP9LargeVBR() : DatarateTestVP9(GET_PARAM(0)) {} protected: virtual void SetUp() { InitializeConfig(); SetMode(::libvpx_test::kRealTime); set_cpu_used_ = GET_PARAM(1); ResetModel(); } }; // Check basic rate targeting for VBR mode with 0 lag. TEST_P(DatarateTestVP9LargeVBR, BasicRateTargetingVBRLagZero) { cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.g_error_resilient = 0; cfg_.rc_end_usage = VPX_VBR; cfg_.g_lag_in_frames = 0; ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, 30, 1, 0, 300); const int bitrates[2] = { 400, 800 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.75) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.36) << " The datarate for the file is greater than target by too much!"; } // Check basic rate targeting for VBR mode with non-zero lag. TEST_P(DatarateTestVP9LargeVBR, BasicRateTargetingVBRLagNonZero) { cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.g_error_resilient = 0; cfg_.rc_end_usage = VPX_VBR; // For non-zero lag, rate control will work (be within bounds) for // real-time mode. if (deadline_ == VPX_DL_REALTIME) { cfg_.g_lag_in_frames = 15; } else { cfg_.g_lag_in_frames = 0; } ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, 30, 1, 0, 300); const int bitrates[2] = { 400, 800 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.75) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.35) << " The datarate for the file is greater than target by too much!"; } // Check basic rate targeting for VBR mode with non-zero lag, with // frame_parallel_decoding_mode off. This enables the adapt_coeff/mode/mv probs // since error_resilience is off. TEST_P(DatarateTestVP9LargeVBR, BasicRateTargetingVBRLagNonZeroFrameParDecOff) { cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.g_error_resilient = 0; cfg_.rc_end_usage = VPX_VBR; // For non-zero lag, rate control will work (be within bounds) for // real-time mode. if (deadline_ == VPX_DL_REALTIME) { cfg_.g_lag_in_frames = 15; } else { cfg_.g_lag_in_frames = 0; } ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, 30, 1, 0, 300); const int bitrates[2] = { 400, 800 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); frame_parallel_decoding_mode_ = 0; ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.75) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.35) << " The datarate for the file is greater than target by too much!"; } // Check basic rate targeting for CBR mode. TEST_P(DatarateTestVP9RealTimeMultiBR, BasicRateTargeting) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); const int bitrates[4] = { 150, 350, 550, 750 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15) << " The datarate for the file is greater than target by too much!"; } // Check basic rate targeting for CBR mode, with frame_parallel_decoding_mode // off( and error_resilience off). TEST_P(DatarateTestVP9RealTimeMultiBR, BasicRateTargetingFrameParDecOff) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; cfg_.g_error_resilient = 0; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); const int bitrates[4] = { 150, 350, 550, 750 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); frame_parallel_decoding_mode_ = 0; ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15) << " The datarate for the file is greater than target by too much!"; } // Check basic rate targeting for CBR. TEST_P(DatarateTestVP9RealTimeMultiBR, BasicRateTargeting444) { ::libvpx_test::Y4mVideoSource video("rush_hour_444.y4m", 0, 140); cfg_.g_profile = 1; cfg_.g_timebase = video.timebase(); cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; const int bitrates[4] = { 250, 450, 650, 850 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(static_cast<double>(cfg_.rc_target_bitrate), effective_datarate_[0] * 0.80) << " The datarate for the file exceeds the target by too much!"; ASSERT_LE(static_cast<double>(cfg_.rc_target_bitrate), effective_datarate_[0] * 1.15) << " The datarate for the file missed the target!" << cfg_.rc_target_bitrate << " " << effective_datarate_; } // Check that (1) the first dropped frame gets earlier and earlier // as the drop frame threshold is increased, and (2) that the total number of // frame drops does not decrease as we increase frame drop threshold. // Use a lower qp-max to force some frame drops. TEST_P(DatarateTestVP9RealTimeMultiBR, ChangingDropFrameThresh) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_undershoot_pct = 20; cfg_.rc_undershoot_pct = 20; cfg_.rc_dropframe_thresh = 10; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 50; cfg_.rc_end_usage = VPX_CBR; cfg_.rc_target_bitrate = 200; cfg_.g_lag_in_frames = 0; // TODO(marpan): Investigate datarate target failures with a smaller keyframe // interval (128). cfg_.kf_max_dist = 9999; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); const int kDropFrameThreshTestStep = 30; const int bitrates[2] = { 50, 150 }; const int bitrate_index = GET_PARAM(2); if (bitrate_index > 1) return; cfg_.rc_target_bitrate = bitrates[bitrate_index]; vpx_codec_pts_t last_drop = 140; int last_num_drops = 0; for (int i = 10; i < 100; i += kDropFrameThreshTestStep) { cfg_.rc_dropframe_thresh = i; ResetModel(); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.25) << " The datarate for the file is greater than target by too much!"; ASSERT_LE(first_drop_, last_drop) << " The first dropped frame for drop_thresh " << i << " > first dropped frame for drop_thresh " << i - kDropFrameThreshTestStep; ASSERT_GE(num_drops_, last_num_drops * 0.85) << " The number of dropped frames for drop_thresh " << i << " < number of dropped frames for drop_thresh " << i - kDropFrameThreshTestStep; last_drop = first_drop_; last_num_drops = num_drops_; } } // namespace // Check basic rate targeting for 2 temporal layers. TEST_P(DatarateTestVP9RealTimeMultiBR, BasicRateTargeting2TemporalLayers) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; // 2 Temporal layers, no spatial layers: Framerate decimation (2, 1). cfg_.ss_number_layers = 1; cfg_.ts_number_layers = 2; cfg_.ts_rate_decimator[0] = 2; cfg_.ts_rate_decimator[1] = 1; cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); const int bitrates[4] = { 200, 400, 600, 800 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); // 60-40 bitrate allocation for 2 temporal layers. cfg_.layer_target_bitrate[0] = 60 * cfg_.rc_target_bitrate / 100; cfg_.layer_target_bitrate[1] = cfg_.rc_target_bitrate; aq_mode_ = 0; if (deadline_ == VPX_DL_REALTIME) { aq_mode_ = 3; cfg_.g_error_resilient = 1; } ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) { ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.85) << " The datarate for the file is lower than target by too much, " "for layer: " << j; ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.15) << " The datarate for the file is greater than target by too much, " "for layer: " << j; } } // Check basic rate targeting for 3 temporal layers. TEST_P(DatarateTestVP9RealTimeMultiBR, BasicRateTargeting3TemporalLayers) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; // 3 Temporal layers, no spatial layers: Framerate decimation (4, 2, 1). cfg_.ss_number_layers = 1; cfg_.ts_number_layers = 3; cfg_.ts_rate_decimator[0] = 4; cfg_.ts_rate_decimator[1] = 2; cfg_.ts_rate_decimator[2] = 1; cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); const int bitrates[4] = { 200, 400, 600, 800 }; const int bitrate_index = GET_PARAM(2); cfg_.rc_target_bitrate = bitrates[bitrate_index]; ResetModel(); // 40-20-40 bitrate allocation for 3 temporal layers. cfg_.layer_target_bitrate[0] = 40 * cfg_.rc_target_bitrate / 100; cfg_.layer_target_bitrate[1] = 60 * cfg_.rc_target_bitrate / 100; cfg_.layer_target_bitrate[2] = cfg_.rc_target_bitrate; aq_mode_ = 0; if (deadline_ == VPX_DL_REALTIME) { aq_mode_ = 3; cfg_.g_error_resilient = 1; } ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) { // TODO(yaowu): Work out more stable rc control strategy and // Adjust the thresholds to be tighter than .75. ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.75) << " The datarate for the file is lower than target by too much, " "for layer: " << j; // TODO(yaowu): Work out more stable rc control strategy and // Adjust the thresholds to be tighter than 1.25. ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.25) << " The datarate for the file is greater than target by too much, " "for layer: " << j; } } // Params: speed setting. class DatarateTestVP9RealTime : public DatarateTestVP9, public ::libvpx_test::CodecTestWithParam<int> { public: DatarateTestVP9RealTime() : DatarateTestVP9(GET_PARAM(0)) {} virtual ~DatarateTestVP9RealTime() {} protected: virtual void SetUp() { InitializeConfig(); SetMode(::libvpx_test::kRealTime); set_cpu_used_ = GET_PARAM(1); ResetModel(); } }; // Check basic rate targeting for CBR mode, with 2 threads and dropped frames. TEST_P(DatarateTestVP9RealTime, BasicRateTargetingDropFramesMultiThreads) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 30; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; // Encode using multiple threads. cfg_.g_threads = 2; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); cfg_.rc_target_bitrate = 200; ResetModel(); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15) << " The datarate for the file is greater than target by too much!"; } // Check basic rate targeting for 3 temporal layers, with frame dropping. // Only for one (low) bitrate with lower max_quantizer, and somewhat higher // frame drop threshold, to force frame dropping. TEST_P(DatarateTestVP9RealTime, BasicRateTargeting3TemporalLayersFrameDropping) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; // Set frame drop threshold and rc_max_quantizer to force some frame drops. cfg_.rc_dropframe_thresh = 20; cfg_.rc_max_quantizer = 45; cfg_.rc_min_quantizer = 0; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; // 3 Temporal layers, no spatial layers: Framerate decimation (4, 2, 1). cfg_.ss_number_layers = 1; cfg_.ts_number_layers = 3; cfg_.ts_rate_decimator[0] = 4; cfg_.ts_rate_decimator[1] = 2; cfg_.ts_rate_decimator[2] = 1; cfg_.temporal_layering_mode = VP9E_TEMPORAL_LAYERING_MODE_BYPASS; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); cfg_.rc_target_bitrate = 200; ResetModel(); // 40-20-40 bitrate allocation for 3 temporal layers. cfg_.layer_target_bitrate[0] = 40 * cfg_.rc_target_bitrate / 100; cfg_.layer_target_bitrate[1] = 60 * cfg_.rc_target_bitrate / 100; cfg_.layer_target_bitrate[2] = cfg_.rc_target_bitrate; aq_mode_ = 0; if (deadline_ == VPX_DL_REALTIME) { aq_mode_ = 3; cfg_.g_error_resilient = 1; } ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); for (int j = 0; j < static_cast<int>(cfg_.ts_number_layers); ++j) { ASSERT_GE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 0.85) << " The datarate for the file is lower than target by too much, " "for layer: " << j; ASSERT_LE(effective_datarate_[j], cfg_.layer_target_bitrate[j] * 1.20) << " The datarate for the file is greater than target by too much, " "for layer: " << j; // Expect some frame drops in this test: for this 200 frames test, // expect at least 10% and not more than 60% drops. ASSERT_GE(num_drops_, 20); ASSERT_LE(num_drops_, 280); } } // Check VP9 region of interest feature. TEST_P(DatarateTestVP9RealTime, RegionOfInterest) { if (deadline_ != VPX_DL_REALTIME || set_cpu_used_ < 5) return; cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 0; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); cfg_.rc_target_bitrate = 450; cfg_.g_w = 640; cfg_.g_h = 480; ResetModel(); // Set ROI parameters use_roi_ = true; memset(&roi_, 0, sizeof(roi_)); roi_.rows = (cfg_.g_h + 7) / 8; roi_.cols = (cfg_.g_w + 7) / 8; roi_.delta_q[1] = -20; roi_.delta_lf[1] = -20; memset(roi_.ref_frame, -1, sizeof(roi_.ref_frame)); roi_.ref_frame[1] = 1; // Use 2 states: 1 is center square, 0 is the rest. roi_.roi_map = reinterpret_cast<uint8_t *>( calloc(roi_.rows * roi_.cols, sizeof(*roi_.roi_map))); ASSERT_TRUE(roi_.roi_map != NULL); for (unsigned int i = 0; i < roi_.rows; ++i) { for (unsigned int j = 0; j < roi_.cols; ++j) { if (i > (roi_.rows >> 2) && i < ((roi_.rows * 3) >> 2) && j > (roi_.cols >> 2) && j < ((roi_.cols * 3) >> 2)) { roi_.roi_map[i * roi_.cols + j] = 1; } } } ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_[0] * 0.90) << " The datarate for the file exceeds the target!"; ASSERT_LE(cfg_.rc_target_bitrate, effective_datarate_[0] * 1.4) << " The datarate for the file missed the target!"; free(roi_.roi_map); } // Params: speed setting, delta q UV. class DatarateTestVP9RealTimeDeltaQUV : public DatarateTestVP9, public ::libvpx_test::CodecTestWith2Params<int, int> { public: DatarateTestVP9RealTimeDeltaQUV() : DatarateTestVP9(GET_PARAM(0)) {} virtual ~DatarateTestVP9RealTimeDeltaQUV() {} protected: virtual void SetUp() { InitializeConfig(); SetMode(::libvpx_test::kRealTime); set_cpu_used_ = GET_PARAM(1); ResetModel(); } }; TEST_P(DatarateTestVP9RealTimeDeltaQUV, DeltaQUV) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 0; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 63; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); cfg_.rc_target_bitrate = 450; cfg_.g_w = 640; cfg_.g_h = 480; ResetModel(); delta_q_uv_ = GET_PARAM(2); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(cfg_.rc_target_bitrate, effective_datarate_[0] * 0.90) << " The datarate for the file exceeds the target!"; ASSERT_LE(cfg_.rc_target_bitrate, effective_datarate_[0] * 1.4) << " The datarate for the file missed the target!"; } // Params: test mode, speed setting and index for bitrate array. class DatarateTestVP9PostEncodeDrop : public DatarateTestVP9, public ::libvpx_test::CodecTestWithParam<int> { public: DatarateTestVP9PostEncodeDrop() : DatarateTestVP9(GET_PARAM(0)) {} protected: virtual void SetUp() { InitializeConfig(); SetMode(::libvpx_test::kRealTime); set_cpu_used_ = GET_PARAM(1); ResetModel(); } }; // Check basic rate targeting for CBR mode, with 2 threads and dropped frames. TEST_P(DatarateTestVP9PostEncodeDrop, PostEncodeDropScreenContent) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 30; cfg_.rc_min_quantizer = 0; cfg_.rc_max_quantizer = 56; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; // Encode using multiple threads. cfg_.g_threads = 2; cfg_.g_error_resilient = 0; tune_content_ = 1; ::libvpx_test::I420VideoSource video("hantro_collage_w352h288.yuv", 352, 288, 30, 1, 0, 300); cfg_.rc_target_bitrate = 300; ResetModel(); ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15) << " The datarate for the file is greater than target by too much!"; } #if CONFIG_VP9_TEMPORAL_DENOISING // Params: speed setting. class DatarateTestVP9RealTimeDenoiser : public DatarateTestVP9RealTime { public: virtual ~DatarateTestVP9RealTimeDenoiser() {} }; // Check basic datarate targeting, for a single bitrate, when denoiser is on. TEST_P(DatarateTestVP9RealTimeDenoiser, LowNoise) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 2; cfg_.rc_max_quantizer = 56; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); // For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING), // there is only one denoiser mode: denoiserYonly(which is 1), // but may add more modes in the future. cfg_.rc_target_bitrate = 400; ResetModel(); // Turn on the denoiser. denoiser_on_ = 1; ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15) << " The datarate for the file is greater than target by too much!"; } // Check basic datarate targeting, for a single bitrate, when denoiser is on, // for clip with high noise level. Use 2 threads. TEST_P(DatarateTestVP9RealTimeDenoiser, HighNoise) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 2; cfg_.rc_max_quantizer = 56; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; cfg_.g_threads = 2; ::libvpx_test::Y4mVideoSource video("noisy_clip_640_360.y4m", 0, 200); // For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING), // there is only one denoiser mode: kDenoiserOnYOnly(which is 1), // but may add more modes in the future. cfg_.rc_target_bitrate = 1000; ResetModel(); // Turn on the denoiser. denoiser_on_ = 1; ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15) << " The datarate for the file is greater than target by too much!"; } // Check basic datarate targeting, for a single bitrate, when denoiser is on, // for 1280x720 clip with 4 threads. TEST_P(DatarateTestVP9RealTimeDenoiser, 4threads) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 2; cfg_.rc_max_quantizer = 56; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; cfg_.g_threads = 4; ::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 300); // For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING), // there is only one denoiser mode: denoiserYonly(which is 1), // but may add more modes in the future. cfg_.rc_target_bitrate = 1000; ResetModel(); // Turn on the denoiser. denoiser_on_ = 1; ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.29) << " The datarate for the file is greater than target by too much!"; } // Check basic datarate targeting, for a single bitrate, when denoiser is off // and on. TEST_P(DatarateTestVP9RealTimeDenoiser, DenoiserOffOn) { cfg_.rc_buf_initial_sz = 500; cfg_.rc_buf_optimal_sz = 500; cfg_.rc_buf_sz = 1000; cfg_.rc_dropframe_thresh = 1; cfg_.rc_min_quantizer = 2; cfg_.rc_max_quantizer = 56; cfg_.rc_end_usage = VPX_CBR; cfg_.g_lag_in_frames = 0; ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1, 0, 400); // For the temporal denoiser (#if CONFIG_VP9_TEMPORAL_DENOISING), // there is only one denoiser mode: denoiserYonly(which is 1), // but may add more modes in the future. cfg_.rc_target_bitrate = 400; ResetModel(); // The denoiser is off by default. denoiser_on_ = 0; // Set the offon test flag. denoiser_offon_test_ = 1; denoiser_offon_period_ = 100; ASSERT_NO_FATAL_FAILURE(RunLoop(&video)); ASSERT_GE(effective_datarate_[0], cfg_.rc_target_bitrate * 0.85) << " The datarate for the file is lower than target by too much!"; ASSERT_LE(effective_datarate_[0], cfg_.rc_target_bitrate * 1.15) << " The datarate for the file is greater than target by too much!"; } #endif // CONFIG_VP9_TEMPORAL_DENOISING VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9RealTimeMultiBR, ::testing::Range(5, 10), ::testing::Range(0, 4)); VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9LargeVBR, ::testing::Range(5, 9), ::testing::Range(0, 2)); VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9RealTime, ::testing::Range(5, 10)); VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9RealTimeDeltaQUV, ::testing::Range(5, 10), ::testing::Values(-5, -10, -15)); VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9PostEncodeDrop, ::testing::Range(5, 6)); #if CONFIG_VP9_TEMPORAL_DENOISING VP9_INSTANTIATE_TEST_CASE(DatarateTestVP9RealTimeDenoiser, ::testing::Range(5, 10)); #endif } // namespace