ref: 2fe893c94fc5880f799d8749bb99b1aa7db79619
dir: /vp9/common/arm/neon/vp9_iht4x4_add_neon.asm/
;
; Copyright (c) 2013 The WebM project authors. All Rights Reserved.
;
; Use of this source code is governed by a BSD-style license
; that can be found in the LICENSE file in the root of the source
; tree. An additional intellectual property rights grant can be found
; in the file PATENTS. All contributing project authors may
; be found in the AUTHORS file in the root of the source tree.
;
EXPORT |vp9_iht4x4_16_add_neon|
ARM
REQUIRE8
PRESERVE8
AREA ||.text||, CODE, READONLY, ALIGN=2
; Parallel 1D IDCT on all the columns of a 4x4 16bits data matrix which are
; loaded in d16-d19. d0 must contain cospi_8_64. d1 must contain
; cospi_16_64. d2 must contain cospi_24_64. The output will be stored back
; into d16-d19 registers. This macro will touch q10- q15 registers and use
; them as buffer during calculation.
MACRO
IDCT4x4_1D
; stage 1
vadd.s16 d23, d16, d18 ; (input[0] + input[2])
vsub.s16 d24, d16, d18 ; (input[0] - input[2])
vmull.s16 q15, d17, d2 ; input[1] * cospi_24_64
vmull.s16 q10, d17, d0 ; input[1] * cospi_8_64
vmull.s16 q13, d23, d1 ; (input[0] + input[2]) * cospi_16_64
vmull.s16 q14, d24, d1 ; (input[0] - input[2]) * cospi_16_64
vmlsl.s16 q15, d19, d0 ; input[1] * cospi_24_64 - input[3] * cospi_8_64
vmlal.s16 q10, d19, d2 ; input[1] * cospi_8_64 + input[3] * cospi_24_64
; dct_const_round_shift
vqrshrn.s32 d26, q13, #14
vqrshrn.s32 d27, q14, #14
vqrshrn.s32 d29, q15, #14
vqrshrn.s32 d28, q10, #14
; stage 2
; output[0] = step[0] + step[3];
; output[1] = step[1] + step[2];
; output[3] = step[0] - step[3];
; output[2] = step[1] - step[2];
vadd.s16 q8, q13, q14
vsub.s16 q9, q13, q14
vswp d18, d19
MEND
; Parallel 1D IADST on all the columns of a 4x4 16bits data matrix which
; loaded in d16-d19. d3 must contain sinpi_1_9. d4 must contain sinpi_2_9.
; d5 must contain sinpi_4_9. d6 must contain sinpi_3_9. The output will be
; stored back into d16-d19 registers. This macro will touch q11,q12,q13,
; q14,q15 registers and use them as buffer during calculation.
MACRO
IADST4x4_1D
vmull.s16 q10, d3, d16 ; s0 = sinpi_1_9 * x0
vmull.s16 q11, d4, d16 ; s1 = sinpi_2_9 * x0
vmull.s16 q12, d6, d17 ; s2 = sinpi_3_9 * x1
vmull.s16 q13, d5, d18 ; s3 = sinpi_4_9 * x2
vmull.s16 q14, d3, d18 ; s4 = sinpi_1_9 * x2
vmovl.s16 q15, d16 ; expand x0 from 16 bit to 32 bit
vaddw.s16 q15, q15, d19 ; x0 + x3
vmull.s16 q8, d4, d19 ; s5 = sinpi_2_9 * x3
vsubw.s16 q15, q15, d18 ; s7 = x0 + x3 - x2
vmull.s16 q9, d5, d19 ; s6 = sinpi_4_9 * x3
vadd.s32 q10, q10, q13 ; x0 = s0 + s3 + s5
vadd.s32 q10, q10, q8
vsub.s32 q11, q11, q14 ; x1 = s1 - s4 - s6
vdup.32 q8, r0 ; duplicate sinpi_3_9
vsub.s32 q11, q11, q9
vmul.s32 q15, q15, q8 ; x2 = sinpi_3_9 * s7
vadd.s32 q13, q10, q12 ; s0 = x0 + x3
vadd.s32 q10, q10, q11 ; x0 + x1
vadd.s32 q14, q11, q12 ; s1 = x1 + x3
vsub.s32 q10, q10, q12 ; s3 = x0 + x1 - x3
; dct_const_round_shift
vqrshrn.s32 d16, q13, #14
vqrshrn.s32 d17, q14, #14
vqrshrn.s32 d18, q15, #14
vqrshrn.s32 d19, q10, #14
MEND
; Generate cosine constants in d6 - d8 for the IDCT
MACRO
GENERATE_COSINE_CONSTANTS
; cospi_8_64 = 15137 = 0x3b21
mov r0, #0x3b00
add r0, #0x21
; cospi_16_64 = 11585 = 0x2d41
mov r3, #0x2d00
add r3, #0x41
; cospi_24_64 = 6270 = 0x187e
mov r12, #0x1800
add r12, #0x7e
; generate constant vectors
vdup.16 d0, r0 ; duplicate cospi_8_64
vdup.16 d1, r3 ; duplicate cospi_16_64
vdup.16 d2, r12 ; duplicate cospi_24_64
MEND
; Generate sine constants in d1 - d4 for the IADST.
MACRO
GENERATE_SINE_CONSTANTS
; sinpi_1_9 = 5283 = 0x14A3
mov r0, #0x1400
add r0, #0xa3
; sinpi_2_9 = 9929 = 0x26C9
mov r3, #0x2600
add r3, #0xc9
; sinpi_4_9 = 15212 = 0x3B6C
mov r12, #0x3b00
add r12, #0x6c
; generate constant vectors
vdup.16 d3, r0 ; duplicate sinpi_1_9
; sinpi_3_9 = 13377 = 0x3441
mov r0, #0x3400
add r0, #0x41
vdup.16 d4, r3 ; duplicate sinpi_2_9
vdup.16 d5, r12 ; duplicate sinpi_4_9
vdup.16 q3, r0 ; duplicate sinpi_3_9
MEND
; Transpose a 4x4 16bits data matrix. Datas are loaded in d16-d19.
MACRO
TRANSPOSE4X4
vtrn.16 d16, d17
vtrn.16 d18, d19
vtrn.32 q8, q9
MEND
AREA Block, CODE, READONLY ; name this block of code
;void vp9_iht4x4_16_add_neon(int16_t *input, uint8_t *dest,
; int dest_stride, int tx_type)
;
; r0 int16_t input
; r1 uint8_t *dest
; r2 int dest_stride
; r3 int tx_type)
; This function will only handle tx_type of 1,2,3.
|vp9_iht4x4_16_add_neon| PROC
; load the inputs into d16-d19
vld1.s16 {q8,q9}, [r0]!
; transpose the input data
TRANSPOSE4X4
; decide the type of transform
cmp r3, #2
beq idct_iadst
cmp r3, #3
beq iadst_iadst
iadst_idct
; generate constants
GENERATE_COSINE_CONSTANTS
GENERATE_SINE_CONSTANTS
; first transform rows
IDCT4x4_1D
; transpose the matrix
TRANSPOSE4X4
; then transform columns
IADST4x4_1D
b end_vp9_iht4x4_16_add_neon
idct_iadst
; generate constants
GENERATE_COSINE_CONSTANTS
GENERATE_SINE_CONSTANTS
; first transform rows
IADST4x4_1D
; transpose the matrix
TRANSPOSE4X4
; then transform columns
IDCT4x4_1D
b end_vp9_iht4x4_16_add_neon
iadst_iadst
; generate constants
GENERATE_SINE_CONSTANTS
; first transform rows
IADST4x4_1D
; transpose the matrix
TRANSPOSE4X4
; then transform columns
IADST4x4_1D
end_vp9_iht4x4_16_add_neon
; ROUND_POWER_OF_TWO(temp_out[j], 4)
vrshr.s16 q8, q8, #4
vrshr.s16 q9, q9, #4
vld1.32 {d26[0]}, [r1], r2
vld1.32 {d26[1]}, [r1], r2
vld1.32 {d27[0]}, [r1], r2
vld1.32 {d27[1]}, [r1]
; ROUND_POWER_OF_TWO(temp_out[j], 4) + dest[j * dest_stride + i]
vaddw.u8 q8, q8, d26
vaddw.u8 q9, q9, d27
; clip_pixel
vqmovun.s16 d26, q8
vqmovun.s16 d27, q9
; do the stores in reverse order with negative post-increment, by changing
; the sign of the stride
rsb r2, r2, #0
vst1.32 {d27[1]}, [r1], r2
vst1.32 {d27[0]}, [r1], r2
vst1.32 {d26[1]}, [r1], r2
vst1.32 {d26[0]}, [r1] ; no post-increment
bx lr
ENDP ; |vp9_iht4x4_16_add_neon|
END