ref: bea7b7bf8ccbc2bc41906517079e76fcfb31cb5a
dir: /code/jpeg-6/jdapimin.c/
/*
* jdapimin.c
*
* Copyright (C) 1994-1995, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains application interface code for the decompression half
* of the JPEG library. These are the "minimum" API routines that may be
* needed in either the normal full-decompression case or the
* transcoding-only case.
*
* Most of the routines intended to be called directly by an application
* are in this file or in jdapistd.c. But also see jcomapi.c for routines
* shared by compression and decompression, and jdtrans.c for the transcoding
* case.
*/
#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
/*
* Initialization of a JPEG decompression object.
* The error manager must already be set up (in case memory manager fails).
*/
GLOBAL void
jpeg_create_decompress (j_decompress_ptr cinfo)
{
int i;
/* For debugging purposes, zero the whole master structure.
* But error manager pointer is already there, so save and restore it.
*/
{
struct jpeg_error_mgr * err = cinfo->err;
MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct));
cinfo->err = err;
}
cinfo->is_decompressor = TRUE;
/* Initialize a memory manager instance for this object */
jinit_memory_mgr((j_common_ptr) cinfo);
/* Zero out pointers to permanent structures. */
cinfo->progress = NULL;
cinfo->src = NULL;
for (i = 0; i < NUM_QUANT_TBLS; i++)
cinfo->quant_tbl_ptrs[i] = NULL;
for (i = 0; i < NUM_HUFF_TBLS; i++) {
cinfo->dc_huff_tbl_ptrs[i] = NULL;
cinfo->ac_huff_tbl_ptrs[i] = NULL;
}
/* Initialize marker processor so application can override methods
* for COM, APPn markers before calling jpeg_read_header.
*/
jinit_marker_reader(cinfo);
/* And initialize the overall input controller. */
jinit_input_controller(cinfo);
/* OK, I'm ready */
cinfo->global_state = DSTATE_START;
}
/*
* Destruction of a JPEG decompression object
*/
GLOBAL void
jpeg_destroy_decompress (j_decompress_ptr cinfo)
{
jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
}
/*
* Abort processing of a JPEG decompression operation,
* but don't destroy the object itself.
*/
GLOBAL void
jpeg_abort_decompress (j_decompress_ptr cinfo)
{
jpeg_abort((j_common_ptr) cinfo); /* use common routine */
}
/*
* Install a special processing method for COM or APPn markers.
*/
GLOBAL void
jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
jpeg_marker_parser_method routine)
{
if (marker_code == JPEG_COM)
cinfo->marker->process_COM = routine;
else if (marker_code >= JPEG_APP0 && marker_code <= JPEG_APP0+15)
cinfo->marker->process_APPn[marker_code-JPEG_APP0] = routine;
else
ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
}
/*
* Set default decompression parameters.
*/
LOCAL void
default_decompress_parms (j_decompress_ptr cinfo)
{
/* Guess the input colorspace, and set output colorspace accordingly. */
/* (Wish JPEG committee had provided a real way to specify this...) */
/* Note application may override our guesses. */
switch (cinfo->num_components) {
case 1:
cinfo->jpeg_color_space = JCS_GRAYSCALE;
cinfo->out_color_space = JCS_GRAYSCALE;
break;
case 3:
if (cinfo->saw_JFIF_marker) {
cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */
} else if (cinfo->saw_Adobe_marker) {
switch (cinfo->Adobe_transform) {
case 0:
cinfo->jpeg_color_space = JCS_RGB;
break;
case 1:
cinfo->jpeg_color_space = JCS_YCbCr;
break;
default:
WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
break;
}
} else {
/* Saw no special markers, try to guess from the component IDs */
int cid0 = cinfo->comp_info[0].component_id;
int cid1 = cinfo->comp_info[1].component_id;
int cid2 = cinfo->comp_info[2].component_id;
if (cid0 == 1 && cid1 == 2 && cid2 == 3)
cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */
else if (cid0 == 82 && cid1 == 71 && cid2 == 66)
cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */
else {
TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
}
}
/* Always guess RGB is proper output colorspace. */
cinfo->out_color_space = JCS_RGB;
break;
case 4:
if (cinfo->saw_Adobe_marker) {
switch (cinfo->Adobe_transform) {
case 0:
cinfo->jpeg_color_space = JCS_CMYK;
break;
case 2:
cinfo->jpeg_color_space = JCS_YCCK;
break;
default:
WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */
break;
}
} else {
/* No special markers, assume straight CMYK. */
cinfo->jpeg_color_space = JCS_CMYK;
}
cinfo->out_color_space = JCS_CMYK;
break;
default:
cinfo->jpeg_color_space = JCS_UNKNOWN;
cinfo->out_color_space = JCS_UNKNOWN;
break;
}
/* Set defaults for other decompression parameters. */
cinfo->scale_num = 1; /* 1:1 scaling */
cinfo->scale_denom = 1;
cinfo->output_gamma = 1.0;
cinfo->buffered_image = FALSE;
cinfo->raw_data_out = FALSE;
cinfo->dct_method = JDCT_DEFAULT;
cinfo->do_fancy_upsampling = TRUE;
cinfo->do_block_smoothing = TRUE;
cinfo->quantize_colors = FALSE;
/* We set these in case application only sets quantize_colors. */
cinfo->dither_mode = JDITHER_FS;
#ifdef QUANT_2PASS_SUPPORTED
cinfo->two_pass_quantize = TRUE;
#else
cinfo->two_pass_quantize = FALSE;
#endif
cinfo->desired_number_of_colors = 256;
cinfo->colormap = NULL;
/* Initialize for no mode change in buffered-image mode. */
cinfo->enable_1pass_quant = FALSE;
cinfo->enable_external_quant = FALSE;
cinfo->enable_2pass_quant = FALSE;
}
/*
* Decompression startup: read start of JPEG datastream to see what's there.
* Need only initialize JPEG object and supply a data source before calling.
*
* This routine will read as far as the first SOS marker (ie, actual start of
* compressed data), and will save all tables and parameters in the JPEG
* object. It will also initialize the decompression parameters to default
* values, and finally return JPEG_HEADER_OK. On return, the application may
* adjust the decompression parameters and then call jpeg_start_decompress.
* (Or, if the application only wanted to determine the image parameters,
* the data need not be decompressed. In that case, call jpeg_abort or
* jpeg_destroy to release any temporary space.)
* If an abbreviated (tables only) datastream is presented, the routine will
* return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then
* re-use the JPEG object to read the abbreviated image datastream(s).
* It is unnecessary (but OK) to call jpeg_abort in this case.
* The JPEG_SUSPENDED return code only occurs if the data source module
* requests suspension of the decompressor. In this case the application
* should load more source data and then re-call jpeg_read_header to resume
* processing.
* If a non-suspending data source is used and require_image is TRUE, then the
* return code need not be inspected since only JPEG_HEADER_OK is possible.
*
* This routine is now just a front end to jpeg_consume_input, with some
* extra error checking.
*/
GLOBAL int
jpeg_read_header (j_decompress_ptr cinfo, boolean require_image)
{
int retcode;
if (cinfo->global_state != DSTATE_START &&
cinfo->global_state != DSTATE_INHEADER)
ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
retcode = jpeg_consume_input(cinfo);
switch (retcode) {
case JPEG_REACHED_SOS:
retcode = JPEG_HEADER_OK;
break;
case JPEG_REACHED_EOI:
if (require_image) /* Complain if application wanted an image */
ERREXIT(cinfo, JERR_NO_IMAGE);
/* Reset to start state; it would be safer to require the application to
* call jpeg_abort, but we can't change it now for compatibility reasons.
* A side effect is to free any temporary memory (there shouldn't be any).
*/
jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */
retcode = JPEG_HEADER_TABLES_ONLY;
break;
case JPEG_SUSPENDED:
/* no work */
break;
}
return retcode;
}
/*
* Consume data in advance of what the decompressor requires.
* This can be called at any time once the decompressor object has
* been created and a data source has been set up.
*
* This routine is essentially a state machine that handles a couple
* of critical state-transition actions, namely initial setup and
* transition from header scanning to ready-for-start_decompress.
* All the actual input is done via the input controller's consume_input
* method.
*/
GLOBAL int
jpeg_consume_input (j_decompress_ptr cinfo)
{
int retcode = JPEG_SUSPENDED;
/* NB: every possible DSTATE value should be listed in this switch */
switch (cinfo->global_state) {
case DSTATE_START:
/* Start-of-datastream actions: reset appropriate modules */
(*cinfo->inputctl->reset_input_controller) (cinfo);
/* Initialize application's data source module */
(*cinfo->src->init_source) (cinfo);
cinfo->global_state = DSTATE_INHEADER;
/*FALLTHROUGH*/
case DSTATE_INHEADER:
retcode = (*cinfo->inputctl->consume_input) (cinfo);
if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */
/* Set up default parameters based on header data */
default_decompress_parms(cinfo);
/* Set global state: ready for start_decompress */
cinfo->global_state = DSTATE_READY;
}
break;
case DSTATE_READY:
/* Can't advance past first SOS until start_decompress is called */
retcode = JPEG_REACHED_SOS;
break;
case DSTATE_PRELOAD:
case DSTATE_PRESCAN:
case DSTATE_SCANNING:
case DSTATE_RAW_OK:
case DSTATE_BUFIMAGE:
case DSTATE_BUFPOST:
case DSTATE_STOPPING:
retcode = (*cinfo->inputctl->consume_input) (cinfo);
break;
default:
ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
}
return retcode;
}
/*
* Have we finished reading the input file?
*/
GLOBAL boolean
jpeg_input_complete (j_decompress_ptr cinfo)
{
/* Check for valid jpeg object */
if (cinfo->global_state < DSTATE_START ||
cinfo->global_state > DSTATE_STOPPING)
ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
return cinfo->inputctl->eoi_reached;
}
/*
* Is there more than one scan?
*/
GLOBAL boolean
jpeg_has_multiple_scans (j_decompress_ptr cinfo)
{
/* Only valid after jpeg_read_header completes */
if (cinfo->global_state < DSTATE_READY ||
cinfo->global_state > DSTATE_STOPPING)
ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
return cinfo->inputctl->has_multiple_scans;
}
/*
* Finish JPEG decompression.
*
* This will normally just verify the file trailer and release temp storage.
*
* Returns FALSE if suspended. The return value need be inspected only if
* a suspending data source is used.
*/
GLOBAL boolean
jpeg_finish_decompress (j_decompress_ptr cinfo)
{
if ((cinfo->global_state == DSTATE_SCANNING ||
cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) {
/* Terminate final pass of non-buffered mode */
if (cinfo->output_scanline < cinfo->output_height)
ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
(*cinfo->master->finish_output_pass) (cinfo);
cinfo->global_state = DSTATE_STOPPING;
} else if (cinfo->global_state == DSTATE_BUFIMAGE) {
/* Finishing after a buffered-image operation */
cinfo->global_state = DSTATE_STOPPING;
} else if (cinfo->global_state != DSTATE_STOPPING) {
/* STOPPING = repeat call after a suspension, anything else is error */
ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
}
/* Read until EOI */
while (! cinfo->inputctl->eoi_reached) {
if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED)
return FALSE; /* Suspend, come back later */
}
/* Do final cleanup */
(*cinfo->src->term_source) (cinfo);
/* We can use jpeg_abort to release memory and reset global_state */
jpeg_abort((j_common_ptr) cinfo);
return TRUE;
}