ref: a0e7f7500b6b252fa15b28d0d0810a881e4766e2
dir: /qw/r_local.h/
// r_local.h -- private refresh defs
#define ALIAS_BASE_SIZE_RATIO (1.0 / 11.0)
// normalizing factor so player model works out to about
// 1 pixel per triangle
#define BMODEL_FULLY_CLIPPED 0x10 // value returned by R_BmodelCheckBBox ()
// if bbox is trivially rejected
//===========================================================================
// viewmodel lighting
typedef struct {
int ambientlight;
int shadelight;
float *plightvec;
} alight_t;
//===========================================================================
// clipped bmodel edges
typedef struct bedge_s
{
mvertex_t *v[2];
struct bedge_s *pnext;
} bedge_t;
typedef struct {
float fv[3]; // viewspace x, y
} auxvert_t;
//===========================================================================
extern cvar_t r_draworder;
extern cvar_t r_speeds;
extern cvar_t r_timegraph;
extern cvar_t r_graphheight;
extern cvar_t r_clearcolor;
extern cvar_t r_waterwarp;
extern cvar_t r_fullbright;
extern cvar_t r_drawentities;
extern cvar_t r_aliasstats;
extern cvar_t r_dspeeds;
extern cvar_t r_drawflat;
extern cvar_t r_ambient;
extern cvar_t r_reportsurfout;
extern cvar_t r_maxsurfs;
extern cvar_t r_numsurfs;
extern cvar_t r_reportedgeout;
extern cvar_t r_maxedges;
extern cvar_t r_numedges;
#define XCENTERING (1.0 / 2.0)
#define YCENTERING (1.0 / 2.0)
#define CLIP_EPSILON 0.001
#define BACKFACE_EPSILON 0.01
//===========================================================================
#define DIST_NOT_SET 98765
// !!! if this is changed, it must be changed in asm_draw.h too !!!
typedef struct clipplane_s
{
vec3_t normal;
float dist;
struct clipplane_s *next;
byte leftedge;
byte rightedge;
byte reserved[2];
} clipplane_t;
extern clipplane_t view_clipplanes[4];
//=============================================================================
void R_RenderWorld (void);
//=============================================================================
extern mplane_t screenedge[4];
extern vec3_t r_origin;
extern vec3_t r_entorigin;
extern float screenAspect;
extern float verticalFieldOfView;
extern float xOrigin, yOrigin;
extern int r_visframecount;
//=============================================================================
extern int vstartscan;
void R_ClearPolyList (void);
void R_DrawPolyList (void);
//
// current entity info
//
extern qboolean insubmodel;
extern vec3_t r_worldmodelorg;
void R_DrawSprite (void);
void R_RenderFace (msurface_t *fa, int clipflags);
void R_RenderPoly (msurface_t *fa, int clipflags);
void R_RenderBmodelFace (bedge_t *pedges, msurface_t *psurf);
void R_TransformPlane (mplane_t *p, float *normal, float *dist);
void R_TransformFrustum (void);
void R_SetSkyFrame (void);
void R_DrawSurfaceBlock16 (void);
void R_DrawSurfaceBlock8 (void);
texture_t *R_TextureAnimation (texture_t *base);
void R_GenSkyTile (void *pdest);
void R_GenSkyTile16 (void *pdest);
void R_Surf8Patch (void);
void R_Surf16Patch (void);
void R_DrawSubmodelPolygons (model_t *pmodel, int clipflags);
void R_DrawSolidClippedSubmodelPolygons (model_t *pmodel);
void R_AddPolygonEdges (emitpoint_t *pverts, int numverts, int miplevel);
surf_t *R_GetSurf (void);
void R_AliasDrawModel (alight_t *plighting);
void R_BeginEdgeFrame (void);
void R_ScanEdges (void);
void D_DrawSurfaces (void);
void R_InsertNewEdges (edge_t *edgestoadd, edge_t *edgelist);
void R_StepActiveU (edge_t *pedge);
void R_RemoveEdges (edge_t *pedge);
extern void R_Surf8Start (void);
extern void R_Surf8End (void);
extern void R_Surf16Start (void);
extern void R_Surf16End (void);
extern void R_EdgeCodeStart (void);
extern void R_EdgeCodeEnd (void);
extern void R_RotateBmodel (void);
extern int c_faceclip;
extern int r_polycount;
extern int r_wholepolycount;
extern model_t *cl_worldmodel;
extern int *pfrustum_indexes[4];
// !!! if this is changed, it must be changed in asm_draw.h too !!!
#define NEAR_CLIP 0.01
extern int ubasestep, errorterm, erroradjustup, erroradjustdown;
extern int vstartscan;
extern fixed16_t sadjust, tadjust;
extern fixed16_t bbextents, bbextentt;
#define MAXBVERTINDEXES 1000 // new clipped vertices when clipping bmodels
// to the world BSP
extern mvertex_t *r_ptverts, *r_ptvertsmax;
extern vec3_t sbaseaxis[3], tbaseaxis[3];
extern float entity_rotation[3][3];
extern int reinit_surfcache;
extern int r_currentkey;
extern int r_currentbkey;
typedef struct btofpoly_s {
int clipflags;
msurface_t *psurf;
} btofpoly_t;
#define MAX_BTOFPOLYS 5000 // FIXME: tune this
extern int numbtofpolys;
extern btofpoly_t *pbtofpolys;
void R_InitTurb (void);
void R_ZDrawSubmodelPolys (model_t *clmodel);
//=========================================================
// Alias models
//=========================================================
#define MAXALIASVERTS 2000 // TODO: tune this
#define ALIAS_Z_CLIP_PLANE 5
extern int numverts;
extern int a_skinwidth;
extern mtriangle_t *ptriangles;
extern int numtriangles;
extern aliashdr_t *paliashdr;
extern mdl_t *pmdl;
extern float leftclip, topclip, rightclip, bottomclip;
extern int r_acliptype;
extern finalvert_t *pfinalverts;
extern auxvert_t *pauxverts;
qboolean R_AliasCheckBBox (void);
//=========================================================
// turbulence stuff
#define AMP 8*0x10000
#define AMP2 3
#define SPEED 20
//=========================================================
// particle stuff
void R_DrawParticles (void);
void R_InitParticles (void);
void R_ClearParticles (void);
void R_ReadPointFile_f (void);
void R_SurfacePatch (void);
extern int r_amodels_drawn;
extern edge_t *auxedges;
extern int r_numallocatededges;
extern edge_t *r_edges, *edge_p, *edge_max;
extern edge_t *newedges[MAXHEIGHT];
extern edge_t *removeedges[MAXHEIGHT];
extern int screenwidth;
// FIXME: make stack vars when debugging done
extern edge_t edge_head;
extern edge_t edge_tail;
extern edge_t edge_aftertail;
extern int r_bmodelactive;
extern vrect_t *pconupdate;
extern float aliasxscale, aliasyscale, aliasxcenter, aliasycenter;
extern float r_aliastransition, r_resfudge;
extern int r_outofsurfaces;
extern int r_outofedges;
extern mvertex_t *r_pcurrentvertbase;
extern int r_maxvalidedgeoffset;
void R_AliasClipTriangle (mtriangle_t *ptri);
extern float r_time1;
extern float dp_time1, dp_time2, db_time1, db_time2, rw_time1, rw_time2;
extern float se_time1, se_time2, de_time1, de_time2, dv_time1, dv_time2;
extern int r_frustum_indexes[4*6];
extern int r_maxsurfsseen, r_maxedgesseen, r_cnumsurfs;
extern qboolean r_surfsonstack;
extern cshift_t cshift_water;
extern qboolean r_dowarpold, r_viewchanged;
extern mleaf_t *r_viewleaf, *r_oldviewleaf;
extern vec3_t r_emins, r_emaxs;
extern mnode_t *r_pefragtopnode;
extern int r_clipflags;
extern int r_dlightframecount;
void R_StoreEfrags (efrag_t **ppefrag);
void R_TimeRefresh_f (void);
void R_TimeGraph (void);
void R_PrintAliasStats (void);
void R_PrintTimes (void);
void R_PrintDSpeeds (void);
void R_AnimateLight (void);
int R_LightPoint (vec3_t p);
void R_SetupFrame (void);
void R_cshift_f (void);
void R_EmitEdge (mvertex_t *pv0, mvertex_t *pv1);
void R_ClipEdge (mvertex_t *pv0, mvertex_t *pv1, clipplane_t *clip);
void R_SplitEntityOnNode2 (mnode_t *node);
void R_MarkLights (dlight_t *light, int bit, mnode_t *node);