shithub: qk1

ref: 859247117dcbf5a92b9dcd9fa6754a773c84d932
dir: /world.c/

View raw version
#include "quakedef.h"

/*

entities never clip against themselves, or their owner

line of sight checks trace->crosscontent, but bullets don't

*/


typedef struct
{
	vec3_t		boxmins, boxmaxs;// enclose the test object along entire move
	float		*mins, *maxs;	// size of the moving object
	vec3_t		mins2, maxs2;	// size when clipping against mosnters
	float		*start, *end;
	trace_t		trace;
	int			type;
	edict_t		*passedict;
} moveclip_t;


int SV_HullPointContents (hull_t *hull, int num, vec3_t p);

/*
===============================================================================

HULL BOXES

===============================================================================
*/


static	hull_t		box_hull;
static	mclipnode_t	box_clipnodes[6];
static	mplane_t	box_planes[6];

/*
===================
SV_InitBoxHull

Set up the planes and clipnodes so that the six floats of a bounding box
can just be stored out and get a proper hull_t structure.
===================
*/
void SV_InitBoxHull (void)
{
	int		i;
	int		side;

	box_hull.clipnodes = box_clipnodes;
	box_hull.planes = box_planes;
	box_hull.firstclipnode = 0;
	box_hull.lastclipnode = 5;

	for (i=0 ; i<6 ; i++)
	{
		box_clipnodes[i].planenum = i;

		side = i&1;

		box_clipnodes[i].children[side] = CONTENTS_EMPTY;
		if (i != 5)
			box_clipnodes[i].children[side^1] = i + 1;
		else
			box_clipnodes[i].children[side^1] = CONTENTS_SOLID;

		box_planes[i].type = i>>1;
		box_planes[i].normal[i>>1] = 1;
	}

}


/*
===================
SV_HullForBox

To keep everything totally uniform, bounding boxes are turned into small
BSP trees instead of being compared directly.
===================
*/
hull_t	*SV_HullForBox (vec3_t mins, vec3_t maxs)
{
	box_planes[0].dist = maxs[0];
	box_planes[1].dist = mins[0];
	box_planes[2].dist = maxs[1];
	box_planes[3].dist = mins[1];
	box_planes[4].dist = maxs[2];
	box_planes[5].dist = mins[2];

	return &box_hull;
}



/*
================
SV_HullForEntity

Returns a hull that can be used for testing or clipping an object of mins/maxs
size.
Offset is filled in to contain the adjustment that must be added to the
testing object's origin to get a point to use with the returned hull.
================
*/
hull_t *SV_HullForEntity (edict_t *ent, vec3_t mins, vec3_t maxs, vec3_t offset)
{
	model_t		*model;
	vec3_t		size;
	vec3_t		hullmins, hullmaxs;
	hull_t		*hull;

	// decide which clipping hull to use, based on the size
	if (ent->v.solid == SOLID_BSP)
	{	// explicit hulls in the BSP model
		if (ent->v.movetype != MOVETYPE_PUSH)
			fatal ("SOLID_BSP without MOVETYPE_PUSH");

		model = sv.models[ (int)ent->v.modelindex ];

		if (!model || model->type != mod_brush)
			fatal ("MOVETYPE_PUSH with a non bsp model");

		VectorSubtract (maxs, mins, size);
		if (size[0] < 3)
			hull = &model->hulls[0];
		else if (size[0] <= 32)
			hull = &model->hulls[1];
		else
			hull = &model->hulls[2];

		// calculate an offset value to center the origin
		VectorSubtract (hull->clip_mins, mins, offset);
		VectorAdd (offset, ent->v.origin, offset);
	}
	else
	{	// create a temp hull from bounding box sizes

		VectorSubtract (ent->v.mins, maxs, hullmins);
		VectorSubtract (ent->v.maxs, mins, hullmaxs);
		hull = SV_HullForBox (hullmins, hullmaxs);

		VectorCopy (ent->v.origin, offset);
	}


	return hull;
}

/*
===============================================================================

ENTITY AREA CHECKING

===============================================================================
*/

typedef struct areanode_s
{
	struct areanode_s *children[2];
	link_t trigger_edicts;
	link_t solid_edicts;
	int axis;		// -1 = leaf node
	float dist;
} areanode_t;

static areanode_t *sv_areanodes;

/*
===============
SV_CreateAreaNode

===============
*/
areanode_t *SV_CreateAreaNode (int depth, vec3_t mins, vec3_t maxs)
{
	areanode_t	*anode;
	vec3_t		size;
	vec3_t		mins1, maxs1, mins2, maxs2;

	anode = Hunk_Alloc(sizeof(*anode));
	ClearLink (&anode->trigger_edicts);
	ClearLink (&anode->solid_edicts);
	VectorSubtract(maxs, mins, size);

	if(size[0] < 1024 && size[1] < 1024){
		anode->axis = -1;
		anode->children[0] = anode->children[1] = nil;
		return anode;
	}

	anode->axis = size[0] <= size[1];
	anode->dist = 0.5 * (maxs[anode->axis] + mins[anode->axis]);

	VectorCopy(mins, mins1);
	VectorCopy(mins, mins2);
	VectorCopy(maxs, maxs1);
	VectorCopy(maxs, maxs2);

	maxs1[anode->axis] = mins2[anode->axis] = anode->dist;

	anode->children[0] = SV_CreateAreaNode(depth+1, mins2, maxs2);
	anode->children[1] = SV_CreateAreaNode(depth+1, mins1, maxs1);

	return anode;
}

/*
===============
SV_ClearWorld

===============
*/
void SV_ClearWorld (void)
{
	SV_InitBoxHull();

	sv_areanodes = SV_CreateAreaNode(0, sv.worldmodel->mins, sv.worldmodel->maxs);
}


/*
===============
SV_UnlinkEdict

===============
*/
void SV_UnlinkEdict (edict_t *ent)
{
	if (!ent->area.prev)
		return;		// not linked in anywhere
	RemoveLink (&ent->area);
	ent->area.prev = ent->area.next = nil;
}


/*
====================
SV_TouchLinks
====================
*/
void SV_TouchLinks ( edict_t *ent, areanode_t *node )
{
	link_t		*l, *next;
	edict_t		*touch;
	int			old_self, old_other;

	// touch linked edicts
	for (l = node->trigger_edicts.next ; l != nil && l != &node->trigger_edicts ; l = next)
	{
		next = l->next;
		touch = EDICT_FROM_AREA(l);
		if (touch == ent)
			continue;
		if (!touch->v.touch || touch->v.solid != SOLID_TRIGGER)
			continue;
		if (ent->v.absmin[0] > touch->v.absmax[0]
		|| ent->v.absmin[1] > touch->v.absmax[1]
		|| ent->v.absmin[2] > touch->v.absmax[2]
		|| ent->v.absmax[0] < touch->v.absmin[0]
		|| ent->v.absmax[1] < touch->v.absmin[1]
		|| ent->v.absmax[2] < touch->v.absmin[2] )
			continue;
		old_self = sv.pr->global_struct->self;
		old_other = sv.pr->global_struct->other;

		sv.pr->global_struct->self = EDICT_TO_PROG(sv.pr, touch);
		sv.pr->global_struct->other = EDICT_TO_PROG(sv.pr, ent);
		sv.pr->global_struct->time = sv.time;
		PR_ExecuteProgram (sv.pr, touch->v.touch);

		sv.pr->global_struct->self = old_self;
		sv.pr->global_struct->other = old_other;
	}

	// recurse down both sides
	if (node->axis == -1)
		return;

	if ( ent->v.absmax[node->axis] > node->dist )
		SV_TouchLinks ( ent, node->children[0] );
	if ( ent->v.absmin[node->axis] < node->dist )
		SV_TouchLinks ( ent, node->children[1] );
}


/*
===============
SV_FindTouchedLeafs

===============
*/
int SV_FindTouchedLeafs (edict_t *ent, mnode_t *node, byte *pvs)
{
	mplane_t	*splitplane;
	int			sides;
	int			leafnum;

	if(node->contents == CONTENTS_SOLID)
		return 0;

	if(node->contents < 0){
		leafnum = (mleaf_t*)node - sv.worldmodel->leafs - 1;
		return pvs[leafnum>>3] & (1<<(leafnum&7));
	}

	splitplane = node->plane;
	sides = BOX_ON_PLANE_SIDE(ent->v.absmin, ent->v.absmax, splitplane);

	return
		((sides & 1) && SV_FindTouchedLeafs(ent, node->children[0], pvs)) ||
		((sides & 2) && SV_FindTouchedLeafs(ent, node->children[1], pvs));
}

/*
===============
SV_LinkEdict

===============
*/
void SV_LinkEdict (edict_t *ent, bool touch_triggers)
{
	areanode_t	*node;

	if (ent->area.prev)
		SV_UnlinkEdict (ent);	// unlink from old position

	if (ent == sv.pr->edicts)
		return;		// don't add the world

	if (ent->free)
		return;

	// set the abs box
	VectorAdd (ent->v.origin, ent->v.mins, ent->v.absmin);
	VectorAdd (ent->v.origin, ent->v.maxs, ent->v.absmax);

	// to make items easier to pick up and allow them to be grabbed off
	// of shelves, the abs sizes are expanded
	if ((int)ent->v.flags & FL_ITEM)
	{
		ent->v.absmin[0] -= 15;
		ent->v.absmin[1] -= 15;
		ent->v.absmax[0] += 15;
		ent->v.absmax[1] += 15;
	}
	else
	{	// because movement is clipped an epsilon away from an actual edge,
		// we must fully check even when bounding boxes don't quite touch
		ent->v.absmin[0] -= 1;
		ent->v.absmin[1] -= 1;
		ent->v.absmin[2] -= 1;
		ent->v.absmax[0] += 1;
		ent->v.absmax[1] += 1;
		ent->v.absmax[2] += 1;
	}

	if (ent->v.solid == SOLID_NOT)
		return;

	// find the first node that the ent's box crosses
	node = sv_areanodes;
	while (1)
	{
		if (node->axis == -1)
			break;
		if (ent->v.absmin[node->axis] > node->dist)
			node = node->children[0];
		else if (ent->v.absmax[node->axis] < node->dist)
			node = node->children[1];
		else
			break;		// crosses the node
	}

	// link it in
	if (ent->v.solid == SOLID_TRIGGER)
		InsertLinkBefore (&ent->area, &node->trigger_edicts);
	else
		InsertLinkBefore (&ent->area, &node->solid_edicts);

	// if touch_triggers, touch all entities at this node and decend for more
	if (touch_triggers)
		SV_TouchLinks ( ent, sv_areanodes );
}



/*
===============================================================================

POINT TESTING IN HULLS

===============================================================================
*/

/*
==================
SV_HullPointContents

==================
*/
int SV_HullPointContents (hull_t *hull, int num, vec3_t p)
{
	float		d;
	mclipnode_t	*node;
	mplane_t	*plane;

	while (num >= 0)
	{
		if (num < hull->firstclipnode || num > hull->lastclipnode)
			fatal ("SV_HullPointContents: bad node number");

		node = hull->clipnodes + num;
		plane = hull->planes + node->planenum;

		if (plane->type < 3)
			d = p[plane->type] - plane->dist;
		else
			d = DotProductDouble(plane->normal, p) - plane->dist;
		if (d < 0)
			num = node->children[1];
		else
			num = node->children[0];
	}

	return num;
}


/*
==================
SV_PointContents

==================
*/
int SV_PointContents (vec3_t p)
{
	int		cont;

	cont = SV_HullPointContents (&sv.worldmodel->hulls[0], 0, p);
	if (cont <= CONTENTS_CURRENT_0 && cont >= CONTENTS_CURRENT_DOWN)
		cont = CONTENTS_WATER;
	return cont;
}

//===========================================================================

/*
============
SV_TestEntityPosition

This could be a lot more efficient...
============
*/
edict_t	*SV_TestEntityPosition (edict_t *ent)
{
	trace_t	trace;

	trace = SV_Move (ent->v.origin, ent->v.mins, ent->v.maxs, ent->v.origin, 0, ent);

	if (trace.startsolid)
		return sv.pr->edicts;

	return nil;
}


/*
===============================================================================

LINE TESTING IN HULLS

===============================================================================
*/

// 1/32 epsilon to keep floating point happy
#define	DIST_EPSILON	(0.03125)

/*
==================
SV_RecursiveHullCheck

==================
*/
bool SV_RecursiveHullCheck (hull_t *hull, int num, float p1f, float p2f, vec3_t p1, vec3_t p2, trace_t *trace)
{
	mclipnode_t	*node;
	mplane_t	*plane;
	float		t1, t2;
	float		frac;
	int			i;
	vec3_t		mid;
	int			side;
	float		midf;

	// check for empty
	if (num < 0)
	{
		if (num != CONTENTS_SOLID)
		{
			trace->allsolid = false;
			if (num == CONTENTS_EMPTY)
				trace->inopen = true;
			else
				trace->inwater = true;
		}
		else
			trace->startsolid = true;
		return true;		// empty
	}

	if (num < hull->firstclipnode || num > hull->lastclipnode)
		fatal ("SV_RecursiveHullCheck: bad node number");

	// find the point distances
	node = hull->clipnodes + num;
	plane = hull->planes + node->planenum;

	if (plane->type < 3)
	{
		t1 = p1[plane->type] - plane->dist;
		t2 = p2[plane->type] - plane->dist;
	}
	else
	{
		t1 = DotProductDouble(plane->normal, p1) - plane->dist;
		t2 = DotProductDouble(plane->normal, p2) - plane->dist;
	}

	/*
	if ( (t1 >= DIST_EPSILON && t2 >= DIST_EPSILON) || (t2 > t1 && t1 >= 0) )
		return SV_RecursiveHullCheck (hull, node->children[0], p1f, p2f, p1, p2, trace);
	if ( (t1 <= -DIST_EPSILON && t2 <= -DIST_EPSILON) || (t2 < t1 && t1 <= 0) )
		return SV_RecursiveHullCheck (hull, node->children[1], p1f, p2f, p1, p2, trace);
	*/
	if (t1 >= 0 && t2 >= 0)
		return SV_RecursiveHullCheck (hull, node->children[0], p1f, p2f, p1, p2, trace);
	if (t1 < 0 && t2 < 0)
		return SV_RecursiveHullCheck (hull, node->children[1], p1f, p2f, p1, p2, trace);

	// put the crosspoint DIST_EPSILON pixels on the near side
	if (t1 < 0)
		frac = (t1 + DIST_EPSILON)/(t1-t2);
	else
		frac = (t1 - DIST_EPSILON)/(t1-t2);
	if (frac < 0)
		frac = 0;
	if (frac > 1)
		frac = 1;

	midf = p1f + (p2f - p1f)*frac;
	for (i=0 ; i<3 ; i++)
		mid[i] = p1[i] + frac*(p2[i] - p1[i]);

	side = (t1 < 0);

	// move up to the node
	if (!SV_RecursiveHullCheck (hull, node->children[side], p1f, midf, p1, mid, trace) )
		return false;

#ifdef PARANOID
	/* was sv_hullmodel */
	if (SV_HullPointContents (hull, node->children[side], mid) == CONTENTS_SOLID)
	{
		Con_Printf ("mid PointInHullSolid\n");
		return false;
	}
#endif

	if (SV_HullPointContents (hull, node->children[side^1], mid) != CONTENTS_SOLID)
		// go past the node
		return SV_RecursiveHullCheck (hull, node->children[side^1], midf, p2f, mid, p2, trace);

	if (trace->allsolid)
		return false;		// never got out of the solid area

	//==================
	// the other side of the node is solid, this is the impact point
	//==================
	if (!side)
	{
		VectorCopy (plane->normal, trace->plane.normal);
		trace->plane.dist = plane->dist;
	}
	else
	{
		VectorSubtract (vec3_origin, plane->normal, trace->plane.normal);
		trace->plane.dist = -plane->dist;
	}

	while (SV_HullPointContents (hull, hull->firstclipnode, mid) == CONTENTS_SOLID)
	{ // shouldn't really happen, but does occasionally
		frac -= 0.1;
		if (frac < 0)
		{
			trace->fraction = midf;
			VectorCopy (mid, trace->endpos);
			Con_DPrintf("backup past 0\n");
			return false;
		}
		midf = p1f + (p2f - p1f)*frac;
		for (i=0 ; i<3 ; i++)
			mid[i] = p1[i] + frac*(p2[i] - p1[i]);
	}

	trace->fraction = midf;
	VectorCopy (mid, trace->endpos);

	return false;
}


/*
==================
SV_ClipMoveToEntity

Handles selection or creation of a clipping hull, and offseting (and
eventually rotation) of the end points
==================
*/
trace_t SV_ClipMoveToEntity (edict_t *ent, vec3_t start, vec3_t mins, vec3_t maxs, vec3_t end)
{
	trace_t		trace;
	vec3_t		offset;
	vec3_t		start_l, end_l;
	hull_t		*hull;

	// fill in a default trace
	memset(&trace, 0, sizeof trace);
	trace.fraction = 1;
	trace.allsolid = true;
	VectorCopy (end, trace.endpos);

	// get the clipping hull
	hull = SV_HullForEntity (ent, mins, maxs, offset);

	VectorSubtract (start, offset, start_l);
	VectorSubtract (end, offset, end_l);

	// trace a line through the apropriate clipping hull
	SV_RecursiveHullCheck (hull, hull->firstclipnode, 0, 1, start_l, end_l, &trace);

	// fix trace up by the offset
	if (trace.fraction != 1)
		VectorAdd (trace.endpos, offset, trace.endpos);

	// did we clip the move?
	if (trace.fraction < 1 || trace.startsolid  )
		trace.ent = ent;

	return trace;
}

//===========================================================================

/*
====================
SV_ClipToLinks

Mins and maxs enclose the entire area swept by the move
====================
*/
void SV_ClipToLinks ( areanode_t *node, moveclip_t *clip )
{
	link_t		*l, *next;
	edict_t		*touch;
	trace_t		trace;

	// touch linked edicts
	for (l = node->solid_edicts.next ; l != &node->solid_edicts ; l = next)
	{
		next = l->next;
		touch = EDICT_FROM_AREA(l);
		if (touch->v.solid == SOLID_NOT)
			continue;
		if (touch == clip->passedict)
			continue;
		if (touch->v.solid == SOLID_TRIGGER)
			fatal ("Trigger in clipping list");

		if (clip->type == MOVE_NOMONSTERS && touch->v.solid != SOLID_BSP)
			continue;

		if (clip->boxmins[0] > touch->v.absmax[0]
		|| clip->boxmins[1] > touch->v.absmax[1]
		|| clip->boxmins[2] > touch->v.absmax[2]
		|| clip->boxmaxs[0] < touch->v.absmin[0]
		|| clip->boxmaxs[1] < touch->v.absmin[1]
		|| clip->boxmaxs[2] < touch->v.absmin[2] )
			continue;

		if (clip->passedict && clip->passedict->v.size[0] && !touch->v.size[0])
			continue;	// points never interact

		// might intersect, so do an exact clip
		if (clip->trace.allsolid)
			return;
		if (clip->passedict)
		{
			if (PROG_TO_EDICT(sv.pr, touch->v.owner) == clip->passedict)
				continue;	// don't clip against own missiles
			if (PROG_TO_EDICT(sv.pr, clip->passedict->v.owner) == touch)
				continue;	// don't clip against owner
		}

		if ((int)touch->v.flags & FL_MONSTER)
			trace = SV_ClipMoveToEntity (touch, clip->start, clip->mins2, clip->maxs2, clip->end);
		else
			trace = SV_ClipMoveToEntity (touch, clip->start, clip->mins, clip->maxs, clip->end);
		if (trace.allsolid || trace.startsolid ||
		trace.fraction < clip->trace.fraction)
		{
			trace.ent = touch;
		 	if (clip->trace.startsolid)
			{
				clip->trace = trace;
				clip->trace.startsolid = true;
			}
			else
				clip->trace = trace;
		}
		else if (trace.startsolid)
			clip->trace.startsolid = true;
	}

	// recurse down both sides
	if (node->axis == -1)
		return;

	if ( clip->boxmaxs[node->axis] > node->dist )
		SV_ClipToLinks ( node->children[0], clip );
	if ( clip->boxmins[node->axis] < node->dist )
		SV_ClipToLinks ( node->children[1], clip );
}


/*
==================
SV_MoveBounds
==================
*/
void SV_MoveBounds (vec3_t start, vec3_t mins, vec3_t maxs, vec3_t end, vec3_t boxmins, vec3_t boxmaxs)
{
	/* debug to test against everything
	boxmins[0] = boxmins[1] = boxmins[2] = -Q_MAXFLOAT;
	boxmaxs[0] = boxmaxs[1] = boxmaxs[2] = Q_MAXFLOAT;
	*/

	int		i;

	for (i=0 ; i<3 ; i++)
	{
		if (end[i] > start[i])
		{
			boxmins[i] = start[i] + mins[i] - 1;
			boxmaxs[i] = end[i] + maxs[i] + 1;
		}
		else
		{
			boxmins[i] = end[i] + mins[i] - 1;
			boxmaxs[i] = start[i] + maxs[i] + 1;
		}
	}
}

/*
==================
SV_Move
==================
*/
trace_t SV_Move (vec3_t start, vec3_t mins, vec3_t maxs, vec3_t end, int type, edict_t *passedict)
{
	moveclip_t	clip;
	int			i;

	memset(&clip, 0, sizeof clip);

	// clip to world
	clip.trace = SV_ClipMoveToEntity ( sv.pr->edicts, start, mins, maxs, end );

	clip.start = start;
	clip.end = end;
	clip.mins = mins;
	clip.maxs = maxs;
	clip.type = type;
	clip.passedict = passedict;

	if (type == MOVE_MISSILE)
	{
		for (i=0 ; i<3 ; i++)
		{
			clip.mins2[i] = -15;
			clip.maxs2[i] = 15;
		}
	}
	else
	{
		VectorCopy (mins, clip.mins2);
		VectorCopy (maxs, clip.maxs2);
	}

	// create the bounding box of the entire move
	SV_MoveBounds ( start, clip.mins2, clip.maxs2, end, clip.boxmins, clip.boxmaxs );

	// clip to entities
	SV_ClipToLinks ( sv_areanodes, &clip );

	return clip.trace;
}