ref: 8e6d4a76d616b39464f4e4a08915871f14cef1f8
dir: /src/internal.h/
/********************************************************************
* *
* THIS FILE IS PART OF THE libopusfile SOFTWARE CODEC SOURCE CODE. *
* USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS *
* GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
* IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. *
* *
* THE libopusfile SOURCE CODE IS (C) COPYRIGHT 2012 *
* by the Xiph.Org Foundation and contributors http://www.xiph.org/ *
* *
********************************************************************/
#if !defined(_opusfile_internal_h)
# define _opusfile_internal_h (1)
# if !defined(_REENTRANT)
# define _REENTRANT
# endif
# if !defined(_GNU_SOURCE)
# define _GNU_SOURCE
# endif
# if !defined(_LARGEFILE_SOURCE)
# define _LARGEFILE_SOURCE
# endif
# if !defined(_LARGEFILE64_SOURCE)
# define _LARGEFILE64_SOURCE
# endif
# if !defined(_FILE_OFFSET_BITS)
# define _FILE_OFFSET_BITS 64
# endif
# include <stdlib.h>
# include <opusfile.h>
typedef struct OggOpusLink OggOpusLink;
# if defined(OP_FIXED_POINT)
typedef opus_int16 op_sample;
# else
typedef float op_sample;
# endif
# if OP_GNUC_PREREQ(3,0)
/*Another alternative is
(__builtin_constant_p(_x)?!!(_x):__builtin_expect(!!(_x),1))
but that evaluates _x multiple times, which may be bad.*/
# define OP_LIKELY(_x) (__builtin_expect(!!(_x),1))
# define OP_UNLIKELY(_x) (__builtin_expect(!!(_x),0))
# else
# define OP_LIKELY(_x) (!!(_x))
# define OP_UNLIKELY(_x) (!!(_x))
# endif
# define OP_INT64_MAX ((ogg_int64_t)0x7FFFFFFFFFFFFFFFLL)
# define OP_INT64_MIN (-OP_INT64_MAX-1)
/*The maximum channel count for any mapping we'll actually decode.*/
# define OP_NCHANNELS_MAX (8)
# if defined(OP_ENABLE_ASSERTIONS)
# if OP_GNUC_PREREQ(2,5)||__SUNPRO_C>=0x590
__attribute__((noreturn))
# endif
void op_fatal_impl(const char *_str,const char *_file,int _line);
# define OP_FATAL(_str) (op_fatal_impl(_str,__FILE__,__LINE__))
# define OP_ASSERT(_cond) \
do{ \
if(OP_UNLIKELY(!(_cond)))OP_FATAL("assertion failed: " #_cond); \
} \
while(0)
# else
# define OP_FATAL(_str) abort()
# define OP_ASSERT(_cond)
# endif
# define OP_MIN(_a,_b) ((_a)<(_b)?(_a):(_b))
# define OP_MAX(_a,_b) ((_a)>(_b)?(_a):(_b))
# define OP_CLAMP(_lo,_x,_hi) (OP_MAX(_lo,OP_MIN(_x,_hi)))
/*Initial state.*/
# define OP_NOTOPEN (0)
/*We've found the first Opus stream in the first link.*/
# define OP_PARTOPEN (1)
# define OP_OPENED (2)
/*We've found the first Opus stream in the current link.*/
# define OP_STREAMSET (3)
/*We've initialized the decoder for the chosen Opus stream in the current
link.*/
# define OP_INITSET (4)
/*Information cached for a single link in a chained Ogg Opus file.
We choose the first Opus stream encountered in each link to play back (and
require at least one).*/
struct OggOpusLink{
/*The byte offset of the first header page in this link.*/
opus_int64 offset;
/*The byte offset of the first data page from the chosen Opus stream in this
link (after the headers).*/
opus_int64 data_offset;
/*The byte offset of the last page from the chosen Opus stream in this link.
This is used when seeking to ensure we find a page before the last one, so
that end-trimming calculations work properly.
This is only valid for seekable sources.*/
opus_int64 end_offset;
/*The granule position of the last sample.
This is only valid for seekable sources.*/
ogg_int64_t pcm_end;
/*The granule position before the first sample.*/
ogg_int64_t pcm_start;
/*The serial number.*/
ogg_uint32_t serialno;
/*The contents of the info header.*/
OpusHead head;
/*The contents of the comment header.*/
OpusTags tags;
};
struct OggOpusFile{
/*The callbacks used to access the data source.*/
OpusFileCallbacks callbacks;
/*A FILE *, memory bufer, etc.*/
void *source;
/*Whether or not we can seek with this data source.*/
int seekable;
/*The number of links in this chained Ogg Opus file.*/
int nlinks;
/*The cached information from each link in a chained Ogg Opus file.
If source isn't seekable (e.g., it's a pipe), only the current link
appears.*/
OggOpusLink *links;
/*The number of serial numbers from a single link.*/
int nserialnos;
/*The capacity of the list of serial numbers from a single link.*/
int cserialnos;
/*Storage for the list of serial numbers from a single link.*/
ogg_uint32_t *serialnos;
/*This is the current offset of the data processed by the ogg_sync_state.
After a seek, this should be set to the target offset so that we can track
the byte offsets of subsequent pages.
After a call to op_get_next_page(), this will point to the first byte after
that page.*/
opus_int64 offset;
/*The total size of this data source, or -1 if it's unseekable.*/
opus_int64 end;
/*Used to locate pages in the data source.*/
ogg_sync_state oy;
/*One of OP_NOTOPEN, OP_PARTOPEN, OP_OPENED, OP_STREAMSET, OP_INITSET.*/
int ready_state;
/*The current link being played back.*/
int cur_link;
/*The number of decoded samples to discard from the start of decoding.*/
opus_int32 cur_discard_count;
/*The granule position of the previous packet (current packet start time).*/
ogg_int64_t prev_packet_gp;
/*The number of bytes read since the last bitrate query, including framing.*/
opus_int64 bytes_tracked;
/*The number of samples decoded since the last bitrate query.*/
ogg_int64_t samples_tracked;
/*Takes physical pages and welds them into a logical stream of packets.*/
ogg_stream_state os;
/*Re-timestamped packets from a single page.
Buffering these relies on the undocumented libogg behavior that ogg_packet
pointers remain valid until the next page is submitted to the
ogg_stream_state they came from.*/
ogg_packet op[255];
/*The index of the next packet to return.*/
int op_pos;
/*The total number of packets available.*/
int op_count;
/*Central working state for the packet-to-PCM decoder.*/
OpusMSDecoder *od;
/*The stream count used to initialize the decoder.*/
int od_stream_count;
/*The coupled stream count used to initialize the decoder.*/
int od_coupled_count;
/*The channel count used to initialize the decoder.*/
int od_channel_count;
/*The channel mapping used to initialize the decoder.*/
unsigned char od_mapping[OP_NCHANNELS_MAX];
/*The buffered data for one decoded packet.*/
op_sample *od_buffer;
/*The current position in the decoded buffer.*/
int od_buffer_pos;
/*The number of valid samples in the decoded buffer.*/
int od_buffer_size;
/*Internal state for dithering float->short output.*/
#if !defined(OP_FIXED_POINT)
float dither_a[OP_NCHANNELS_MAX*4];
float dither_b[OP_NCHANNELS_MAX*4];
int dither_mute;
opus_uint32 dither_seed;
#endif
};
int op_strncasecmp(const char *_a,const char *_b,int _n);
#endif