ref: 8be7f27b758ef9ef818f68db0d8bcb7b038eae0e
dir: /sys/src/9/mt7688/irq.c/
/* * Interrupt Handling for the MT7688 */ #include "u.h" #include "../port/lib.h" #include "mem.h" #include "dat.h" #include "fns.h" #include "ureg.h" #include "io.h" #include "../port/error.h" /* map the irq number to the interrupt controller */ static const int irq2inc[32] = { /* cpu based interrupts */ [IRQsw1] = -1, [IRQsw2] = -1, [IRQlow] = -1, [IRQhigh] = -1, [IRQpci] = -1, [IRQethr] = -1, [IRQwifi] = -1, [IRQtimer] = -1, /* irqs on the SoC interrupt controller */ [IRQsys] = INC_SYSCTL, [IRQtimer0] = INC_TIMER0, [IRQwdog] = INC_WDOG, [IRQillacc] = INC_ILLACC, [IRQpcm] = INC_PCM, [IRQuartf] = INC_UARTF, [IRQgpio] = INC_GPIO, [IRQdma] = INC_DMA, [IRQnand] = INC_NAND, [IRQperf] = INC_PERF, [IRQi2s] = INC_I2S, [IRQspi] = INC_SPI, [IRQuartl] = INC_UARTL, [IRQcrypto] = INC_CRYPTO, // [IRQsdhc] = INC_SDHC, // [IRQr2p] = INC_R2P, [IRQethsw] = INC_ETHSW, [IRQusbh] = INC_USBH, [IRQusbd] = INC_USBD, }; static const int inc2irq[32] = { [INC_SYSCTL] = IRQsys, [INC_TIMER0] = IRQtimer0, [INC_WDOG] = IRQwdog, [INC_ILLACC] = IRQillacc, [INC_PCM] = IRQpcm, [INC_UARTF] = IRQuartf, [INC_GPIO] = IRQgpio, [INC_DMA] = IRQdma, [INC_NAND] = IRQnand, [INC_PERF] = IRQperf, [INC_I2S] = IRQi2s, [INC_SPI] = IRQspi, [INC_UARTL] = IRQuartl, [INC_CRYPTO] = IRQcrypto, // [INC_SDHC] = IRQsdhc, // [INC_R2P] = IRQr2p, [INC_ETHSW] = IRQethsw, [INC_USBH] = IRQusbh, [INC_USBD] = IRQusbd, }; typedef struct Handler Handler; struct Handler { Handler *next; void (*f)(Ureg*, void *); void *arg; int irq; }; static Lock intrlock; static Handler handlers[IRQmax+1]; void incintr(Ureg*, void*); static u32int incread(int offset) { return *IO(u32int, (IRQBASE + offset)); } static void incwrite(int offset, u32int val) { *IO(u32int, (IRQBASE + offset)) = val; } /* * called by main(), clears all the irq's * sets SoC interrupt controller to relay * IRQs through CPU interrupts 2 and 3 */ void intrinit(void) { incwrite(IRQ_MASK_CLR, 0xFFFFFFFF); intrenable(IRQlow, incintr, (void *)0, 0, "inclow"); // intrenable(IRQhigh, incintr, (void *)1, 1, "inchigh"); } /* called by drivers to setup irq's */ void intrenable(int irq, void (*f)(Ureg*, void *), void *arg, int priority, char *name) { Handler *hp; u32int r; if(irq > IRQmax || irq < 0) panic("intrenable: %s gave bad irq number of %d", name, irq); /* debugging */ if(irq == 0 || irq == 1) iprint("software irq enabled?"); hp = &handlers[irq]; ilock(&intrlock); if(hp->f != nil) { for(; hp->next != nil; hp = hp->next) ; if((hp->next = xalloc(sizeof *hp)) == nil) panic("intrenable: out of memory"); hp = hp->next; hp->next = nil; } hp->f = f; hp->arg = arg; hp->irq = irq; iunlock(&intrlock); if(irq > IRQtimer) { r = incread(FIQ_SEL); r |= (priority << irq2inc[irq]); incwrite(FIQ_SEL, r); incwrite(IRQ_MASK_SET, (1 << irq2inc[irq])); } else { intron(INTR0 << irq); } } void intrdisable(int irq, void (*)(Ureg*, void *), void*, int, char *name) { if(irq > IRQmax || irq < 0) panic("intrdisable: %s gave bad irq number of %d", name, irq); if(irq > IRQtimer) { incwrite(IRQ_MASK_CLR, (1 << irq2inc[irq])); } else { introff(INTR0 << irq); } } /* called by trap to handle requests, returns true if a clock interrupt */ int intr(Ureg* ur) { ulong cause, mask; int clockintr; Handler *hh, *hp; m->intr++; clockintr = 0; /* * ignore interrupts that we have disabled, even if their cause bits * are set. */ cause = ur->cause & ur->status & INTMASK; cause &= ~(INTR1|INTR0); /* ignore sw interrupts */ if (cause == 0) iprint("spurious interrupt\n"); if(cause & INTR7){ clock(ur); cause &= ~INTR7; clockintr = 1; } // iprint("INTR %luX\n", cause); hh = &handlers[2]; for(mask = INTR2; cause != 0 && mask < INTR7; mask <<= 1){ if(cause & mask){ for(hp = hh; hp != nil; hp = hp->next){ if(hp->f != nil){ hp->f(ur, hp->arg); cause &= ~mask; } } } hh++; } if(cause != 0) iprint("unhandled interrupts %lux\n", cause); return clockintr; } /* off to handle requests for the SoC interrupt controller */ /* * the interrupts controller on the mt7688 SoC can be mapped to * either CPU interrupt 2 or 3. So when those are tripped, * this code then checks the secondary interrupt controller * to see which IRQ it has. The controller defines CPU INTR2 * as "low priority" IRQ, and INTR3 as "high priority" FIQ. */ void incintr(Ureg *ureg, void *arg) { u32int p; u32int reg; u32int pending; u32int mask; Handler *hh, *hp; p = (uintptr)arg; reg = (p == 0) ? IRQ_STAT : FIQ_STAT; pending = incread(reg); hh = &handlers[8]; for(mask = 1 ; pending != 0 && mask < 0x80000000; mask <<= 1) { if(pending & mask) { for(hp = hh; hp != nil; hp = hp->next) { if(hp->f != nil) { hp->f(ureg, hp->arg); pending &= ~mask; } } } hh++; } if(pending != 0){ iprint("unhandled inc interrupts %uX\n", pending); delay(2000); } } void intrclear(int irq) { incwrite(IRQ_EOI, 1 << irq2inc[irq]); } void intrshutdown(void) { introff(INTMASK); incwrite(IRQ_MASK_CLR, 0xFFFF); coherence(); } /* * left over debugging stuff */ ulong incraw(void) { return incread(INT_PURE); } ulong incmask(void) { return incread(IRQ_MASK); } ulong incstat(void) { return incread(IRQ_STAT); } ulong incsel(void) { return incread(IRQ_SEL0); }