ref: 0a99762fecf60df9be62bc61f6bc979cf2188be5
dir: /external/glfw/docs/monitor.dox/
/*!
@page monitor_guide Monitor guide
@tableofcontents
This guide introduces the monitor related functions of GLFW. For details on
a specific function in this category, see the @ref monitor. There are also
guides for the other areas of GLFW.
- @ref intro_guide
- @ref window_guide
- @ref context_guide
- @ref vulkan_guide
- @ref input_guide
@section monitor_object Monitor objects
A monitor object represents a currently connected monitor and is represented as
a pointer to the [opaque](https://en.wikipedia.org/wiki/Opaque_data_type) type
@ref GLFWmonitor. Monitor objects cannot be created or destroyed by the
application and retain their addresses until the monitors they represent are
disconnected or until the library is [terminated](@ref intro_init_terminate).
Each monitor has a current video mode, a list of supported video modes,
a virtual position, a human-readable name, an estimated physical size and
a gamma ramp. One of the monitors is the primary monitor.
The virtual position of a monitor is in
[screen coordinates](@ref coordinate_systems) and, together with the current
video mode, describes the viewports that the connected monitors provide into the
virtual desktop that spans them.
To see how GLFW views your monitor setup and its available video modes, run the
`monitors` test program.
@subsection monitor_monitors Retrieving monitors
The primary monitor is returned by @ref glfwGetPrimaryMonitor. It is the user's
preferred monitor and is usually the one with global UI elements like task bar
or menu bar.
@code
GLFWmonitor* primary = glfwGetPrimaryMonitor();
@endcode
You can retrieve all currently connected monitors with @ref glfwGetMonitors.
See the reference documentation for the lifetime of the returned array.
@code
int count;
GLFWmonitor** monitors = glfwGetMonitors(&count);
@endcode
The primary monitor is always the first monitor in the returned array, but other
monitors may be moved to a different index when a monitor is connected or
disconnected.
@subsection monitor_event Monitor configuration changes
If you wish to be notified when a monitor is connected or disconnected, set
a monitor callback.
@code
glfwSetMonitorCallback(monitor_callback);
@endcode
The callback function receives the handle for the monitor that has been
connected or disconnected and the event that occurred.
@code
void monitor_callback(GLFWmonitor* monitor, int event)
{
if (event == GLFW_CONNECTED)
{
// The monitor was connected
}
else if (event == GLFW_DISCONNECTED)
{
// The monitor was disconnected
}
}
@endcode
If a monitor is disconnected, all windows that are full screen on it will be
switched to windowed mode before the callback is called. Only @ref
glfwGetMonitorName and @ref glfwGetMonitorUserPointer will return useful values
for a disconnected monitor and only before the monitor callback returns.
@section monitor_properties Monitor properties
Each monitor has a current video mode, a list of supported video modes,
a virtual position, a content scale, a human-readable name, a user pointer, an
estimated physical size and a gamma ramp.
@subsection monitor_modes Video modes
GLFW generally does a good job selecting a suitable video mode when you create
a full screen window, change its video mode or make a windowed one full
screen, but it is sometimes useful to know exactly which video modes are
supported.
Video modes are represented as @ref GLFWvidmode structures. You can get an
array of the video modes supported by a monitor with @ref glfwGetVideoModes.
See the reference documentation for the lifetime of the returned array.
@code
int count;
GLFWvidmode* modes = glfwGetVideoModes(monitor, &count);
@endcode
To get the current video mode of a monitor call @ref glfwGetVideoMode. See the
reference documentation for the lifetime of the returned pointer.
@code
const GLFWvidmode* mode = glfwGetVideoMode(monitor);
@endcode
The resolution of a video mode is specified in
[screen coordinates](@ref coordinate_systems), not pixels.
@subsection monitor_size Physical size
The physical size of a monitor in millimetres, or an estimation of it, can be
retrieved with @ref glfwGetMonitorPhysicalSize. This has no relation to its
current _resolution_, i.e. the width and height of its current
[video mode](@ref monitor_modes).
@code
int width_mm, height_mm;
glfwGetMonitorPhysicalSize(monitor, &width_mm, &height_mm);
@endcode
While this can be used to calculate the raw DPI of a monitor, this is often not
useful. Instead use the [monitor content scale](@ref monitor_scale) and
[window content scale](@ref window_scale) to scale your content.
@subsection monitor_scale Content scale
The content scale for a monitor can be retrieved with @ref
glfwGetMonitorContentScale.
@code
float xscale, yscale;
glfwGetMonitorContentScale(monitor, &xscale, &yscale);
@endcode
The content scale is the ratio between the current DPI and the platform's
default DPI. This is especially important for text and any UI elements. If the
pixel dimensions of your UI scaled by this look appropriate on your machine then
it should appear at a reasonable size on other machines regardless of their DPI
and scaling settings. This relies on the system DPI and scaling settings being
somewhat correct.
The content scale may depend on both the monitor resolution and pixel density
and on user settings. It may be very different from the raw DPI calculated from
the physical size and current resolution.
@subsection monitor_pos Virtual position
The position of the monitor on the virtual desktop, in
[screen coordinates](@ref coordinate_systems), can be retrieved with @ref
glfwGetMonitorPos.
@code
int xpos, ypos;
glfwGetMonitorPos(monitor, &xpos, &ypos);
@endcode
@subsection monitor_workarea Work area
The area of a monitor not occupied by global task bars or menu bars is the work
area. This is specified in [screen coordinates](@ref coordinate_systems) and
can be retrieved with @ref glfwGetMonitorWorkarea.
@code
int xpos, ypos, width, height;
glfwGetMonitorWorkarea(monitor, &xpos, &ypos, &width, &height);
@endcode
@subsection monitor_name Human-readable name
The human-readable, UTF-8 encoded name of a monitor is returned by @ref
glfwGetMonitorName. See the reference documentation for the lifetime of the
returned string.
@code
const char* name = glfwGetMonitorName(monitor);
@endcode
Monitor names are not guaranteed to be unique. Two monitors of the same model
and make may have the same name. Only the monitor handle is guaranteed to be
unique, and only until that monitor is disconnected.
@subsection monitor_userptr User pointer
Each monitor has a user pointer that can be set with @ref
glfwSetMonitorUserPointer and queried with @ref glfwGetMonitorUserPointer. This
can be used for any purpose you need and will not be modified by GLFW. The
value will be kept until the monitor is disconnected or until the library is
terminated.
The initial value of the pointer is `NULL`.
@subsection monitor_gamma Gamma ramp
The gamma ramp of a monitor can be set with @ref glfwSetGammaRamp, which accepts
a monitor handle and a pointer to a @ref GLFWgammaramp structure.
@code
GLFWgammaramp ramp;
unsigned short red[256], green[256], blue[256];
ramp.size = 256;
ramp.red = red;
ramp.green = green;
ramp.blue = blue;
for (i = 0; i < ramp.size; i++)
{
// Fill out gamma ramp arrays as desired
}
glfwSetGammaRamp(monitor, &ramp);
@endcode
The gamma ramp data is copied before the function returns, so there is no need
to keep it around once the ramp has been set.
It is recommended that your gamma ramp have the same size as the current gamma
ramp for that monitor.
The current gamma ramp for a monitor is returned by @ref glfwGetGammaRamp. See
the reference documentation for the lifetime of the returned structure.
@code
const GLFWgammaramp* ramp = glfwGetGammaRamp(monitor);
@endcode
If you wish to set a regular gamma ramp, you can have GLFW calculate it for you
from the desired exponent with @ref glfwSetGamma, which in turn calls @ref
glfwSetGammaRamp with the resulting ramp.
@code
glfwSetGamma(monitor, 1.0);
@endcode
To experiment with gamma correction via the @ref glfwSetGamma function, run the
`gamma` test program.
@note The software controlled gamma ramp is applied _in addition_ to the
hardware gamma correction, which today is usually an approximation of sRGB
gamma. This means that setting a perfectly linear ramp, or gamma 1.0, will
produce the default (usually sRGB-like) behavior.
*/