ref: c116550e6a41572796e4db65e4f6acbcb3d9d6f8
dir: /man/5/0intro/
.TH INTRO 5 .SH NAME intro \- introduction to the Plan 9 File Protocol 9P in Inferno .SH SYNOPSIS .B #include <lib9.h> .br .B #include <styx.h> .SH DESCRIPTION Inferno uses the Plan 9 protocol 9P to make resources visible as file hierarchies. There have been two versions of 9P, the most recent being 9P2000. Inferno originally used its own protocol called .IR Styx , which was a simplified version of the first 9P protocol. When 9P was subsequently revised as 9P2000, Inferno adopted that, but still using the name .IR Styx . To reduce confusion and to emphasise that Inferno and Plan 9 use the same protocol, the name .I Styx is being replaced by 9P. References to `Styx' remain in the programs and documentation, but will eventually be eliminated. .PP An Inferno .I server is an agent that provides one or more hierarchical file systems \(em file trees \(em that may be accessed by Inferno processes. A server responds to requests by .I clients to navigate the hierarchy, and to create, remove, read, and write files. The prototypical server is a separate machine that stores large numbers of user files on permanent media. Another possibility for a server is to synthesize files on demand, perhaps based on information on data structures inside the kernel; the .IR prog (3) .I kernel device is a part of the Inferno kernel that does this. User programs can also act as servers. One easy way is to serve a set of files using the .IR sys-file2chan (2) interface. More complex Limbo file service applications can use .IR styx (2) to handle the protocol messages directly, or use .IR styxservers (2) to provide a higher-level framework for file serving. .PP A .I connection to a server is a bidirectional communication path from the client to the server. There may be a single client or multiple clients sharing the same connection. A server's file tree is attached to a process group's name space by .IR bind and .I mount calls; see .IR intro (2) and .IR sys-bind (2). Processes in the group are then clients of the server: system calls operating on files are translated into requests and responses transmitted on the connection to the appropriate service. .PP The .IR "Plan 9 File Protocol" , 9P, is used for messages between .I clients and .IR servers . A client transmits .I requests .RI ( T-messages ) to a server, which subsequently returns .I replies .RI ( R-messages ) to the client. The combined acts of transmitting (receiving) a request of a particular type, and receiving (transmitting) its reply is called a .I transaction of that type. .PP Each message consists of a sequence of bytes. Two-, four-, and eight-byte fields hold unsigned integers represented in little-endian order (least significant byte first). Data items of larger or variable lengths are represented by a two-byte field specifying a count, .IR n , followed by .I n bytes of data. Text strings are represented this way, with the text itself stored as a UTF-8 encoded sequence of Unicode characters (see .IR utf (6)). Text strings in 9P messages are not .SM NUL\c -terminated: .I n counts the bytes of UTF-8 data, which include no final zero byte. The .SM NUL character is illegal in all text strings in 9P, and is therefore excluded from file names, user names, and so on. .PP Each 9P message begins with a four-byte size field specifying the length in bytes of the complete message including the four bytes of the size field itself. The next byte is the message type, one of the constants in the module .IR styx (2), and in the C include file .BR <styx.h> (see .IR styx (10.2)). The next two bytes are an identifying .IR tag , described below. The remaining bytes are parameters of different sizes. In the message descriptions, the number of bytes in a field is given in brackets after the field name. The notation .IR parameter [ n ] where .I n is not a constant represents a variable-length parameter: .IR n [2] followed by .I n bytes of data forming the .IR parameter . The notation .IR string [ s ] (using a literal .I s character) is shorthand for .IR s [2] followed by .I s bytes of UTF-8 text. (Systems may choose to reduce the set of legal characters to reduce syntactic problems, for example to remove slashes from name components, but the protocol has no such restriction. Inferno names may contain any printable character (that is, any character outside hexadecimal 00-1F and 80-9F) except slash.) Messages are transported in byte form to allow for machine independence; .IR styx (10.2) describes routines that convert to and from this form into a machine-dependent C structure. .SH MESSAGES .ta \w'\fLTsession 'u .IP .ne 2v .IR size [4] .B Tversion .IR tag [2] .IR msize [4] .IR version [ s ] .br .IR size [4] .B Rversion .IR tag [2] .IR msize [4] .IR version [ s ] .IP .ne 2v .IR size [4] .B Tauth .IR tag [2] .IR afid [4] .IR uname [ s ] .IR aname [ s ] .br .br .IR size [4] .B Rauth .IR tag [2] .IR aqid [13] .IP .ne 2v .IR size [4] .B Rerror .IR tag [2] .IR ename [ s ] .IP .ne 2v .IR size [4] .B Tflush .IR tag [2] .IR oldtag [2] .br .IR size [4] .B Rflush .IR tag [2] .IP .ne 2v .IR size [4] .B Tattach .IR tag [2] .IR fid [4] .IR afid [4] .IR uname [ s ] .IR aname [ s ] .br .IR size [4] .B Rattach .IR tag [2] .IR qid [13] .IP .ne 2v .IR size [4] .B Twalk .IR tag [2] .IR fid [4] .IR newfid [4] .IR nwname [2] .IR nwname *( wname [ s ]) .br .IR size [4] .B Rwalk .IR tag [2] .IR nwqid [2] .IR nwqid *( wqid [13]) .IP .ne 2v .IR size [4] .B Topen .IR tag [2] .IR fid [4] .IR mode [1] .br .IR size [4] .B Ropen .IR tag [2] .IR qid [13] .IR iounit [4] .IP .ne 2v .IR size [4] .B Tcreate .IR tag [2] .IR fid [4] .IR name [ s ] .IR perm [4] .IR mode [1] .br .IR size [4] .B Rcreate .IR tag [2] .IR qid [13] .IR iounit [4] .IP .ne 2v .IR size [4] .B Tread .IR tag [2] .IR fid [4] .IR offset [8] .IR count [4] .br .IR size [4] .B Rread .IR tag [2] .IR count [4] .IR data [ count ] .IP .ne 2v .IR size [4] .B Twrite .IR tag [2] .IR fid [4] .IR offset [8] .IR count [4] .IR data [ count ] .br .IR size [4] .B Rwrite .IR tag [2] .IR count [4] .IP .ne 2v .IR size [4] .B Tclunk .IR tag [2] .IR fid [4] .br .IR size [4] .B Rclunk .IR tag [2] .IP .ne 2v .IR size [4] .B Tremove .IR tag [2] .IR fid [4] .br .IR size [4] .B Rremove .IR tag [2] .IP .ne 2v .IR size [4] .B Tstat .IR tag [2] .IR fid [4] .br .IR size [4] .B Rstat .IR tag [2] .IR stat [ n ] .IP .ne 2v .IR size [4] .B Twstat .IR tag [2] .IR fid [4] .IR stat [ n ] .br .IR size [4] .B Rwstat .IR tag [2] .PP Each T-message has a .I tag field, chosen and used by the client to identify the message. The reply to the message will have the same tag. Clients must arrange that no two outstanding messages on the same connection have the same tag. An exception is the tag .BR NOTAG , defined as .B 16rFFFF in .IR styx (2) and .IR styx (10.2): the client can use it, when establishing a connection, to override tag matching in .B version messages. .PP The type of an R-message will either be one greater than the type of the corresponding T-message or .BR Rerror , indicating that the request failed. In the latter case, the .I ename field contains a string describing the reason for failure. .PP The .B version message identifies the version of the protocol and indicates the maximum message size the system is prepared to handle. It also initializes the connection and aborts all outstanding I/O on the connection. The set of messages between .B version requests is called a .IR session . .PP Most T-messages contain a .IR fid , a 32-bit unsigned integer that the client uses to identify a ``current file'' on the server. Fids are somewhat like file descriptors in a user process, but they are not restricted to files open for I/O: directories being examined, files being accessed by .IR sys-stat (2) calls, and so on \(em all files being manipulated by the operating system \(em are identified by fids. Fids are chosen by the client. All requests on a connection share the same fid space; when several clients share a connection, the agent managing the sharing must arrange that no two clients choose the same fid. .PP The fid supplied in an .B attach message will be taken by the server to refer to the root of the served file tree. The .B attach identifies the user to the server and may specify a particular file tree served by the server (for those that supply more than one). .PP Permission to attach to the service is proven by providing a special fid, called .BR afid , in the .B attach message. This .B afid is established by exchanging .B auth messages and subsequently manipulated using .B read and .B write messages to exchange authentication information not defined explicitly by 9P. Once the authentication protocol is complete, the .B afid is presented in the .B attach to permit the user to access the service. .PP A .B walk message causes the server to change the current file associated with a fid to be a file in the directory that is the old current file, or one of its subdirectories. .B Walk returns a new fid that refers to the resulting file. Usually, a client maintains a fid for the root, and navigates by .B walks from the root fid. .PP A client can send multiple T-messages without waiting for the corresponding R-messages, but all outstanding T-messages must specify different tags. The server may delay the response to a request and respond to later ones; this is sometimes necessary, for example when the client reads from a file that the server synthesizes from external events such as keyboard characters. .PP Replies (R-messages) to .BR auth , .BR attach , .BR walk , .BR open , and .B create requests convey a .I qid field back to the client. The qid represents the server's unique identification for the file being accessed: two files on the same server hierarchy are the same if and only if their qids are the same. (The client may have multiple fids pointing to a single file on a server and hence having a single qid.) The thirteen-byte qid fields hold a one-byte type, specifying whether the file is a directory, append-only file, etc., and two unsigned integers: first the four-byte qid .IR version , then the eight-byte qid .IR path . The path is an integer unique among all files in the hierarchy. If a file is deleted and recreated with the same name in the same directory, the old and new path components of the qids should be different. The version is a version number for a file; typically, it is incremented every time the file is modified. .PP An existing file can be .BR opened , or a new file may be .B created in the current (directory) file. I/O of a given number of bytes at a given offset on an open file is done by .B read and .BR write . .PP A client should .B clunk any fid that is no longer needed. The .B remove transaction deletes files. .PP The .B stat transaction retrieves information about the file. The .I stat field in the reply includes the file's name, access permissions (read, write and execute for owner, group and public), access and modification times, and owner and group identifications (see .IR sys-stat (2)). The owner and group identifications are textual names. The .B wstat transaction allows some of a file's properties to be changed. .PP A request can be aborted with a flush request. When a server receives a .BR Tflush , it should not reply to the message with tag .I oldtag (unless it has already replied), and it should immediately send an .BR Rflush . The client must wait until it gets the .B Rflush (even if the reply to the original message arrives in the interim), at which point .I oldtag may be reused. .PP Because the message size is negotiable and some elements of the protocol are variable length, it is possible (although unlikely) to have a situation where a valid message is too large to fit within the negotiated size. For example, a very long file name may cause a .B Rstat of the file or .B Rread of its directory entry to be too large to send. In most such cases, the server should generate an error rather than modify the data to fit, such as by truncating the file name. The exception is that a long error string in an .B Rerror message should be truncated if necessary, since the string is only advisory and in some sense arbitrary. .PP Most programs do not see the 9P protocol directly; instead calls to library routines that access files are translated by the mount driver, .IR mnt (3), into 9P messages. .SH DIRECTORIES Directories are created by .B create with .B DMDIR set in the permissions argument (see .IR stat (5)). The members of a directory can be found with .IR read (5). All directories must support .B walks to the directory .B .. (dot-dot) meaning parent directory, although by convention directories contain no explicit entry for .B .. or .B . (dot). The parent of the root directory of a server's tree is itself. .SH "ACCESS PERMISSIONS" Each file server maintains a set of user and group names. Each user can be a member of any number of groups. Each group has a .I group leader who has special privileges (see .IR stat (5)). Every file request has an implicit user id (copied from the original .BR attach ) and an implicit set of groups (every group of which the user is a member). .PP Each file has an associated .I owner and .I group id and three sets of permissions: those of the owner, those of the group, and those of ``other'' users. When the owner attempts to do something to a file, the owner, group, and other permissions are consulted, and if any of them grant the requested permission, the operation is allowed. For someone who is not the owner, but is a member of the file's group, the group and other permissions are consulted. For everyone else, the other permissions are used. Each set of permissions says whether reading is allowed, whether writing is allowed, and whether executing is allowed. A .B walk in a directory is regarded as executing the directory, not reading it. Permissions are kept in the low-order bits of the file .IR mode : owner read/write/execute permission represented as 1 in bits 8, 7, and 6 respectively (using 0 to number the low order). The group permissions are in bits 5, 4, and 3, and the other permissions are in bits 2, 1, and 0. .PP The file .I mode contains some additional attributes besides the permissions. If bit 31 .RB ( DMDIR ) is set, the file is a directory; if bit 30 .RB ( DMAPPEND ) is set, the file is append-only (offset is ignored in writes); if bit 29 .RB ( DMEXCL ) is set, the file is exclusive-use (only one client may have it open at a time); if bit 27 .RB ( DMAUTH ) is set, the file is an authentication file established by .B auth messages; if bit 26 .RB ( DMTMP ) is set, the contents of the file (or directory) are not included in nightly archives. (Bit 28 is skipped for historical reasons.) These bits are reproduced, from the top bit down, in the type byte of the Qid: .BR QTDIR , .BR QTAPPEND , .BR QTEXCL , (skipping one bit) .BR QTAUTH , and .BR QTTMP . The name .BR QTFILE , defined to be zero, identifies the value of the type for a plain file. .SH SEE ALSO .IR intro (2), .IR styx (2), .IR styxservers (2), .IR sys-bind (2), .IR sys-stat (2), .IR mnt (3), .IR prog (3), .IR read (5), .IR stat (5), .IR styx (10.2)