ref: bd6c2aad586814b091ce5aca9d41cf2c51adb37b
dir: /man/8/rip/
.TH RIP 8 .SH NAME rip \- routing information protocol .SH SYNOPSIS .B ip/rip .RB [ -2 ] .RB [ -b ] .RB [ -d ] .RB [ -n ] [ .BI -x " mntpt" ] [ .I net \&... ] .B & .SH DESCRIPTION .I Rip implements the Internet RIP routing protocol described by RFC1058 and RFC2453. It watches the network and makes appropriate changes to the machine's Internet routing table (see .B iproute in .IR ip (3)), based on routing packets broadcast by gateways on the network. .I Rip is only used when a single default gateway is inadequate, typically because a machine sits on a network directly connected to several others, having no common gateway or router. On networks where there is just one gateway, it is usually simpler and more efficient to configure that statically using .IR ndb (6) or dynamically using DHCP/BOOTP, rather than running .IR rip . .PP .I Rip serves the network on .I mntpt (default: .BR /net ). When it starts, .I rip learns its own interfaces and directly attached networks by reading .IB mntpt /ipifc , and notes any routes currently in .IB mntpt /iproute . .PP By default, .I rip neither broadcasts routes nor replies to requests for its route table. If the .B \-b option is given, .I rip periodically broadcasts changes to its routing table to each of its interfaces. If at least one explicit .I net address is given, the broadcasts are restricted to just the interfaces listed (and .B \-b is implied). .PP The .B \-d option causes .I routed to record changes it makes to the routing tables. This can be helpful when locating misleading announcements from rogue gateways. A second .B \-d will include detailed information about every packet. The .B \-n option tells .I rip not to change the local routing table, but only say what changes it would have made. .PP .I Rip understands both version1 and version 2 of the protocol, and interprets updates from gateways appropriately. By default, it transmits updates using version 1; if the .B -2 option is given, it uses version 2 instead, which is preferable when the network has subnets. .\".SH FILES .\".LR /sys/log/iproute " debugging information" .SH SOURCE .B /appl/cmd/ip/rip.b .SH "SEE ALSO" .IR ip (3), .IR ndb (6) .\" .IR ipconfig (8)