shithub: purgatorio

ref: a920c765f2b4130590fb5971a50690b21664957a
dir: /man/1/m4/

View raw version
.TH M4 1 
.SH NAME
m4 \- macro processor
.SH SYNOPSIS
.B m4
[
.BI -p prefix
]
[
.B -t
]
[
.BI -D name = value
] [
.BI -Q name = value
] [
.BI -U name
] [
.I file
\&...
]
.SH DESCRIPTION
.I M4
is a general-purpose macro processor.
It copies text from each of the input
.I files
in order (or standard input by default), and writes the processed text to the standard output.
.PP
Macro calls
have the form
.IP
.IB name ( arg1,\ arg2,\ ...,\ argn )
.PP
The `(' must immediately follow the name of the macro.
If a defined macro name is not followed by a `(',
it is deemed to have no arguments.
Leading unquoted blanks, tabs, and newlines are ignored while collecting arguments.
A comma within a nested parenthesis is part of an argument value, not an argument separator.
Potential macro names consist of alphabetic letters, Unicode characters,
digits, and underscore `\_', where the first character is not a digit.
.PP
Comments begin with the
.B #
character and extend to the end of that line; the characters in a comment are copied to the current
output stream unchanged.
The comment start and end sequences may be changed using the
.B changecom
call described below.
.PP
The left and right single quotes (ie, grave and acute accents \`\|\' ) are used to quote strings.
Because the left and right quotes are distinct, quoted strings may nest.
The value of a quoted string is the string stripped of the outermost quotes.
The left and right quote characters may be changed using the
.B changequote
call described below.
.PP
When
.I m4
recognises a macro name, followed by a `(', it collects arguments up to a matching right parenthesis.
Macro evaluation proceeds normally during this collection, and the text produced by those macro calls
is interpreted exactly as if it had been in the original input stream (in place of the corresponding macro call).
Thus, any commas or right parentheses within the value of a nested
call are as effective as those in the original input text.
(Remember however that commas within
.I nested
parentheses are not argument separators.)
After argument collection,
the value of the macro is pushed back onto the input stream
and rescanned.
.PP
.I M4
makes available the following built-in macros.
They may be redefined, but once this is done the original meaning is lost.
Their values are null unless otherwise stated.
.TF changequote
.TP
changecom
Change the starting and ending delimiters for subsequent comments to the first and second arguments.
If the second argument is missing or an empty string, comments will be ended by newline.
If there are no arguments, there are no comments.
.TP
changequote
Change quote characters to the first and second arguments.
.I Changequote
without arguments restores the original values of
.BR `\|' .
.TP
copydef
The second argument is installed with the value of the macro
named by the first argument,
which may be a built-in macro.
Typically both arguments are quoted to prevent too early expansion.
A macro can be renamed using
.B copydef
followed by
.BR undefine .
.TP
define
The second argument is installed as the value of the macro
named by the first argument.
When the macro is later called (expanded),
each occurrence in the replacement text of
.BI $ n,
where
.I n
is a digit,
is replaced by the
.IR n -th
argument of that macro call.
Argument 0 is the name of the macro;
missing arguments are replaced by the null string.
If the macro value is the same as its name, or the value is
.BR $0 ,
the result is the macro name.
To prevent expansion of a name when redefining a macro, quote the first argument.
.TP
divert
.I M4
maintains 10 output streams,
numbered 0-9.
The final output is the concatenation of the streams
in numerical order;
initially stream 0 is the current stream.
The
.I divert
macro changes the current output stream to its (digit-string)
argument.
Output diverted to a stream other than 0 through 9
is discarded.
.TP
divnum
Returns the value of the current output stream.
.TP
dnl
Reads and discards characters up to and including the next newline.
.TP
dumpdef
Prints current names and definitions,
for the named items, or for all if no arguments are given.
.TP
errprint
Prints its argument
on the diagnostic output file.
.TP
eval
Evaluates its argument as an arithmetic expression, using 32-bit arithmetic,
and returns the result as a signed decimal integer.
The only literals are decimal integers.
Operators are those of Limbo: the binary operators
.BR || ,
.BR && ,
.BR | ,
.BR ^ ,
.BR & ,
.BR "== !=" ,
.BR "< > >= <=" ,
.B "<< >>"
(arithmetic shifts),
.BR "+ -" ,
.BR "* / %" ,
.BR "**" " (power)";
the unary operators
.BR + ,
.BR - ,
.BR ~ ,
.BR ! ;
and parenthesis.
Operator precedence is the same as in Limbo.
Right shifts are signed.
.TP
ifdef
If the first argument is defined, the value is the second argument, otherwise the third.
If there is no third argument, the value is null.
The word
.B inferno
is predefined with
.RB ` inferno '
as its replacement text.
.TP
ifelse
Has three or more arguments.
If the first argument is the same string as the second,
then the value is the third argument.
If not, the process is repeated with arguments 4, 5, 6 and so on, in groups of three.
If no match is found, the result is the remaining argument (not part of a group of three),
or null if none is present.
.TP
include
Returns the contents of the file named in the argument.
.TP
incr
Returns the value of its argument incremented by 1.
The value of the argument is calculated
by interpreting an initial digit-string as a decimal number.
.TP
index
Returns the position in its first argument where the second argument begins (zero origin),
or \-1 if the second argument does not occur.
.TP
len
Returns the number of characters in its argument.
.TP
maketemp
Returns its first argument after replacing any trailing XXXs by the current host name, process ID, and a unique letter.
Normally used to create unique temporary file names.
.TP
sinclude
The same as
.I include,
except that it
says nothing if the file is inaccessible.
.TP
substr
Returns a substring of its first argument.
The second argument is a zero origin
number selecting the first character;
the third argument indicates the length of the substring.
A missing third argument is taken to be large enough to extend to
the end of the first string.
.TP
syscmd
Runs the first argument as an
.IR sh (1)
command.
No value is returned.
Note that the output of a command can be redirected to a temporary file named by
.BR maketemp ,
included, and then removed.
.TP
translit
Transliterates the characters in its first argument
from the set given by the second argument to the set given by the third.
No abbreviations are permitted.
.TP
undefine
Removes the definition of the macro named in its argument.
.TP
undivert
Causes immediate output of text from diversions named as
arguments, or all diversions if no argument.
Text may be undiverted into another diversion.
Undiverting discards the diverted text.
.PD
.PP
The
.B -p
option causes
.I m4
to add the given prefix character to the names of predefined macros;
typically the
.I prefix
is a Unicode character, to reduce the chance of a clash with macro names in the input text.
The
.B -t
option produces a trace on standard error.
.PP
.I M4
otherwise
interprets its command line options after installing the predefined macro set.
The
.B -D
option defines
.I name
as a macro with the given
.IR value ;
.B -Q
defines
.I name
as a macro with the given
.IR value
that is regarded as always quoted (ie, is never rescanned).
Neither
.B -D
nor
.B -Q
may change a predefined macro.
The
.B -U
option
.I undefines
the given macro
.IR name ,
which may be one of the predefined macros.
.PP
.I M4
in Inferno is more closely related to the original
.I m4
in Seventh Edition UNIX than its more elaborate relatives in System V and POSIX.
.SH "SEE ALSO"
B. W. Kernighan and D. M. Ritchie,
.I The M4 Macro Processor