ref: 61870c24fae357b78029ce54be0c004e1ffdb3c7
dir: /libfreetype/ttobjs.h/
/***************************************************************************/
/* */
/* ttobjs.h */
/* */
/* Objects manager (specification). */
/* */
/* Copyright 1996-2001, 2002 by */
/* David Turner, Robert Wilhelm, and Werner Lemberg. */
/* */
/* This file is part of the FreeType project, and may only be used, */
/* modified, and distributed under the terms of the FreeType project */
/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
/* this file you indicate that you have read the license and */
/* understand and accept it fully. */
/* */
/***************************************************************************/
#ifndef __TTOBJS_H__
#define __TTOBJS_H__
#include <ft2build.h>
#include FT_INTERNAL_OBJECTS_H
#include FT_INTERNAL_TRUETYPE_TYPES_H
FT_BEGIN_HEADER
/*************************************************************************/
/* */
/* <Type> */
/* TT_Driver */
/* */
/* <Description> */
/* A handle to a TrueType driver object. */
/* */
typedef struct TT_DriverRec_* TT_Driver;
/*************************************************************************/
/* */
/* <Type> */
/* TT_Instance */
/* */
/* <Description> */
/* A handle to a TrueType size object. */
/* */
typedef struct TT_SizeRec_* TT_Size;
/*************************************************************************/
/* */
/* <Type> */
/* TT_GlyphSlot */
/* */
/* <Description> */
/* A handle to a TrueType glyph slot object. */
/* */
/* <Note> */
/* This is a direct typedef of FT_GlyphSlot, as there is nothing */
/* specific about the TrueType glyph slot. */
/* */
typedef FT_GlyphSlot TT_GlyphSlot;
/*************************************************************************/
/* */
/* <Struct> */
/* TT_GraphicsState */
/* */
/* <Description> */
/* The TrueType graphics state used during bytecode interpretation. */
/* */
typedef struct TT_GraphicsState_
{
FT_UShort rp0;
FT_UShort rp1;
FT_UShort rp2;
FT_UnitVector dualVector;
FT_UnitVector projVector;
FT_UnitVector freeVector;
FT_Long loop;
FT_F26Dot6 minimum_distance;
FT_Int round_state;
FT_Bool auto_flip;
FT_F26Dot6 control_value_cutin;
FT_F26Dot6 single_width_cutin;
FT_F26Dot6 single_width_value;
FT_Short delta_base;
FT_Short delta_shift;
FT_Byte instruct_control;
FT_Bool scan_control;
FT_Int scan_type;
FT_UShort gep0;
FT_UShort gep1;
FT_UShort gep2;
} TT_GraphicsState;
#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
FT_LOCAL( void )
tt_glyphzone_done( TT_GlyphZone zone );
FT_LOCAL( FT_Error )
tt_glyphzone_new( FT_Memory memory,
FT_UShort maxPoints,
FT_Short maxContours,
TT_GlyphZone zone );
#endif /* TT_CONFIG_OPTION_BYTECODE_INTERPRETER */
/*************************************************************************/
/* */
/* EXECUTION SUBTABLES */
/* */
/* These sub-tables relate to instruction execution. */
/* */
/*************************************************************************/
#define TT_MAX_CODE_RANGES 3
/*************************************************************************/
/* */
/* There can only be 3 active code ranges at once: */
/* - the Font Program */
/* - the CVT Program */
/* - a glyph's instructions set */
/* */
typedef enum TT_CodeRange_Tag_
{
tt_coderange_none = 0,
tt_coderange_font,
tt_coderange_cvt,
tt_coderange_glyph
} TT_CodeRange_Tag;
typedef struct TT_CodeRange_
{
FT_Byte* base;
FT_ULong size;
} TT_CodeRange;
typedef TT_CodeRange TT_CodeRangeTable[TT_MAX_CODE_RANGES];
/*************************************************************************/
/* */
/* Defines a function/instruction definition record. */
/* */
typedef struct TT_DefRecord_
{
FT_Int range; /* in which code range is it located? */
FT_Long start; /* where does it start? */
FT_UInt opc; /* function #, or instruction code */
FT_Bool active; /* is it active? */
} TT_DefRecord, *TT_DefArray;
/*************************************************************************/
/* */
/* Subglyph transformation record. */
/* */
typedef struct TT_Transform_
{
FT_Fixed xx, xy; /* transformation matrix coefficients */
FT_Fixed yx, yy;
FT_F26Dot6 ox, oy; /* offsets */
} TT_Transform;
/*************************************************************************/
/* */
/* Subglyph loading record. Used to load composite components. */
/* */
typedef struct TT_SubglyphRec_
{
FT_Long index; /* subglyph index; initialized with -1 */
FT_Bool is_scaled; /* is the subglyph scaled? */
FT_Bool is_hinted; /* should it be hinted? */
FT_Bool preserve_pps; /* preserve phantom points? */
FT_Long file_offset;
FT_BBox bbox;
FT_Pos left_bearing;
FT_Pos advance;
TT_GlyphZoneRec zone;
FT_Long arg1; /* first argument */
FT_Long arg2; /* second argument */
FT_UShort element_flag; /* current load element flag */
TT_Transform transform; /* transformation matrix */
FT_Vector pp1, pp2; /* phantom points */
} TT_SubGlyphRec, *TT_SubGlyph_Stack;
/*************************************************************************/
/* */
/* A note regarding non-squared pixels: */
/* */
/* (This text will probably go into some docs at some time; for now, it */
/* is kept here to explain some definitions in the TIns_Metrics */
/* record). */
/* */
/* The CVT is a one-dimensional array containing values that control */
/* certain important characteristics in a font, like the height of all */
/* capitals, all lowercase letter, default spacing or stem width/height. */
/* */
/* These values are found in FUnits in the font file, and must be scaled */
/* to pixel coordinates before being used by the CVT and glyph programs. */
/* Unfortunately, when using distinct x and y resolutions (or distinct x */
/* and y pointsizes), there are two possible scalings. */
/* */
/* A first try was to implement a `lazy' scheme where all values were */
/* scaled when first used. However, while some values are always used */
/* in the same direction, some others are used under many different */
/* circumstances and orientations. */
/* */
/* I have found a simpler way to do the same, and it even seems to work */
/* in most of the cases: */
/* */
/* - All CVT values are scaled to the maximum ppem size. */
/* */
/* - When performing a read or write in the CVT, a ratio factor is used */
/* to perform adequate scaling. Example: */
/* */
/* x_ppem = 14 */
/* y_ppem = 10 */
/* */
/* We choose ppem = x_ppem = 14 as the CVT scaling size. All cvt */
/* entries are scaled to it. */
/* */
/* x_ratio = 1.0 */
/* y_ratio = y_ppem/ppem (< 1.0) */
/* */
/* We compute the current ratio like: */
/* */
/* - If projVector is horizontal, */
/* ratio = x_ratio = 1.0 */
/* */
/* - if projVector is vertical, */
/* ratio = y_ratio */
/* */
/* - else, */
/* ratio = sqrt( (proj.x * x_ratio) ^ 2 + (proj.y * y_ratio) ^ 2 ) */
/* */
/* Reading a cvt value returns */
/* ratio * cvt[index] */
/* */
/* Writing a cvt value in pixels: */
/* cvt[index] / ratio */
/* */
/* The current ppem is simply */
/* ratio * ppem */
/* */
/*************************************************************************/
/*************************************************************************/
/* */
/* Metrics used by the TrueType size and context objects. */
/* */
typedef struct TT_Size_Metrics_
{
/* for non-square pixels */
FT_Long x_ratio;
FT_Long y_ratio;
FT_UShort ppem; /* maximum ppem size */
FT_Long ratio; /* current ratio */
FT_Fixed scale;
FT_F26Dot6 compensations[4]; /* device-specific compensations */
FT_Bool valid;
FT_Bool rotated; /* `is the glyph rotated?'-flag */
FT_Bool stretched; /* `is the glyph stretched?'-flag */
} TT_Size_Metrics;
/*************************************************************************/
/* */
/* TrueType size class. */
/* */
typedef struct TT_SizeRec_
{
FT_SizeRec root;
TT_Size_Metrics ttmetrics;
#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS
FT_UInt strike_index; /* 0xFFFF to indicate invalid */
FT_Size_Metrics strike_metrics; /* current strike's metrics */
#endif
#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
FT_UInt num_function_defs; /* number of function definitions */
FT_UInt max_function_defs;
TT_DefArray function_defs; /* table of function definitions */
FT_UInt num_instruction_defs; /* number of ins. definitions */
FT_UInt max_instruction_defs;
TT_DefArray instruction_defs; /* table of ins. definitions */
FT_UInt max_func;
FT_UInt max_ins;
TT_CodeRangeTable codeRangeTable;
TT_GraphicsState GS;
FT_ULong cvt_size; /* the scaled control value table */
FT_Long* cvt;
FT_UShort storage_size; /* The storage area is now part of */
FT_Long* storage; /* the instance */
TT_GlyphZoneRec twilight; /* The instance's twilight zone */
/* debugging variables */
/* When using the debugger, we must keep the */
/* execution context tied to the instance */
/* object rather than asking it on demand. */
FT_Bool debug;
TT_ExecContext context;
#endif /* TT_CONFIG_OPTION_BYTECODE_INTERPRETER */
} TT_SizeRec;
/*************************************************************************/
/* */
/* TrueType driver class. */
/* */
typedef struct TT_DriverRec_
{
FT_DriverRec root;
TT_ExecContext context; /* execution context */
TT_GlyphZoneRec zone; /* glyph loader points zone */
void* extension_component;
} TT_DriverRec;
/*************************************************************************/
/* */
/* Face functions */
/* */
FT_LOCAL( FT_Error )
tt_face_init( FT_Stream stream,
TT_Face face,
FT_Int face_index,
FT_Int num_params,
FT_Parameter* params );
FT_LOCAL( void )
tt_face_done( TT_Face face );
/*************************************************************************/
/* */
/* Size functions */
/* */
FT_LOCAL( FT_Error )
tt_size_init( TT_Size size );
FT_LOCAL( void )
tt_size_done( TT_Size size );
FT_LOCAL( FT_Error )
tt_size_reset( TT_Size size );
/*************************************************************************/
/* */
/* Driver functions */
/* */
FT_LOCAL( FT_Error )
tt_driver_init( TT_Driver driver );
FT_LOCAL( void )
tt_driver_done( TT_Driver driver );
FT_END_HEADER
#endif /* __TTOBJS_H__ */
/* END */