ref: 60ecd07e6d3f5786c8723dc9172c35d580fdadc8
dir: /os/boot/pc/pbs.s/
/* * FAT Partition Boot Sector. Loaded at 0x7C00: * 8a pbs.s; 8l -o pbs -l -H3 -T0x7C00 pbs.8 * Will load the target at LOADSEG*16+LOADOFF, so the target * should be probably be loaded with LOADOFF added to the * -Taddress. * If LOADSEG is a multiple of 64KB and LOADOFF is 0 then * targets larger than 64KB can be loaded. * * This code uses the traditional INT13 BIOS interface and can * therefore only access the first 8.4GB of the disc. * * It relies on the _volid field in the FAT header containing * the LBA of the root directory. */ #include "x16.h" #include "mem.h" #define LOADSEG (0x10000/16) /* where to load code (64KB) */ #define LOADOFF 0 #define DIROFF 0x0200 /* where to read the root directory */ /* * FAT directory entry. */ #define Dname 0x00 #define Dext 0x08 #define Dattr 0x0B #define Dtime 0x16 #define Ddate 0x18 #define Dstart 0x1A #define Dlengthlo 0x1C #define Dlengthhi 0x1E #define Dirsz 0x20 /* * Data is kept on the stack, indexed by rBP. */ #define Xdap 0x00 /* disc address packet */ #define Xrootsz 0x10 /* file data area */ #define Xdrive 0x12 /* boot drive, passed by BIOS or MBR */ #define Xtotal 0x14 /* sum of allocated data above */ TEXT _magic(SB), $0 BYTE $0xEB; BYTE $0x3C; /* jmp .+ 0x3C (_start0x3E) */ BYTE $0x90 /* nop */ TEXT _version(SB), $0 BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00 TEXT _sectsize(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _clustsize(SB), $0 BYTE $0x00 TEXT _nresrv(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _nfats(SB), $0 BYTE $0x00 TEXT _rootsize(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _volsize(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _mediadesc(SB), $0 BYTE $0x00 TEXT _fatsize(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _trksize(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _nheads(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _nhiddenlo(SB), $0 BYTE $0x00; BYTE $0x00 TEXT _nhiddenhi(SB), $0 BYTE $0x00; BYTE $0x00; TEXT _bigvolsize(SB), $0 BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; TEXT _driveno(SB), $0 BYTE $0x00 TEXT _reserved0(SB), $0 BYTE $0x00 TEXT _bootsig(SB), $0 BYTE $0x00 TEXT _volid(SB), $0 BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; TEXT _label(SB), $0 BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00 BYTE $0x00; BYTE $0x00; BYTE $0x00 TEXT _type(SB), $0 BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; BYTE $0x00; _start0x3E: CLI CLR(rAX) MTSR(rAX, rSS) /* 0000 -> rSS */ MTSR(rAX, rDS) /* 0000 -> rDS, source segment */ MTSR(rAX, rES) LWI(_magic-Xtotal(SB), rSP) MW(rSP, rBP) /* set the indexed-data pointer */ SBPB(rDL, Xdrive) /* save the boot drive */ /* booting from a CD starts us at 7C0:0. Move to 0:7C00 */ PUSHR(rAX) LWI(_nxt(SB), rAX) PUSHR(rAX) BYTE $0xCB /* FAR RET */ TEXT _nxt(SB), $0 STI LWI(confidence(SB), rSI) /* for that warm, fuzzy feeling */ CALL16(BIOSputs(SB)) CALL16(dreset(SB)) _jmp00: LW(_volid(SB), rAX) /* Xrootlo */ LW(_volid+2(SB), rDX) /* Xroothi */ LWI(_magic+DIROFF(SB), rBX) CALL16(BIOSread(SB)) /* read the root directory */ LWI((512/Dirsz), rBX) LWI(_magic+DIROFF(SB), rDI) /* compare first directory entry */ _cmp00: PUSHR(rDI) /* save for later if it matches */ LWI(bootfile(SB), rSI) LWI(Dattr, rCX) REP CMPSB POPR(rDI) JEQ _jmp02 DEC(rBX) JEQ _jmp01 ADDI(Dirsz, rDI) JMP _cmp00 _jmp01: CALL16(buggery(SB)) _jmp02: CLR(rBX) /* a handy value */ LW(_rootsize(SB), rAX) /* calculate and save Xrootsz */ LWI(Dirsz, rCX) MUL(rCX) LW(_sectsize(SB), rCX) PUSHR(rCX) DEC(rCX) ADD(rCX, rAX) ADC(rBX, rDX) POPR(rCX) /* _sectsize(SB) */ DIV(rCX) PUSHR(rAX) /* Xrootsz */ /* * rDI points to the matching directory entry. */ LXW(Dstart, xDI, rAX) /* starting sector address */ DEC(rAX) /* that's just the way it is */ DEC(rAX) LB(_clustsize(SB), rCL) CLRB(rCH) MUL(rCX) LW(_volid(SB), rCX) /* Xrootlo */ ADD(rCX, rAX) LW(_volid+2(SB), rCX) /* Xroothi */ ADC(rCX, rDX) POPR(rCX) /* Xrootsz */ ADD(rCX, rAX) ADC(rBX, rDX) PUSHR(rAX) /* calculate how many sectors to read */ PUSHR(rDX) LXW(Dlengthlo, xDI, rAX) LXW(Dlengthhi, xDI, rDX) LW(_sectsize(SB), rCX) PUSHR(rCX) DEC(rCX) ADD(rCX, rAX) ADC(rBX, rDX) POPR(rCX) /* _sectsize(SB) */ DIV(rCX) MW(rAX, rCX) POPR(rDX) POPR(rAX) LWI(LOADSEG, rBX) /* address to load into (seg+offset) */ MTSR(rBX, rES) /* seg */ LWI(LOADOFF, rBX) /* offset */ _readboot: CALL16(BIOSread(SB)) /* read the sector */ LW(_sectsize(SB), rDI) /* bump addresses/counts */ ADD(rDI, rBX) JCC _incsecno MFSR(rES, rDI) /* next 64KB segment */ ADDI(0x1000, rDI) MTSR(rDI, rES) _incsecno: CLR(rDI) INC(rAX) ADC(rDI, rDX) LOOP _readboot LWI(LOADSEG, rDI) /* set rDS for loaded code */ MTSR(rDI, rDS) FARJUMP16(LOADSEG, LOADOFF) /* no deposit, no return */ TEXT buggery(SB), $0 LWI(error(SB), rSI) CALL16(BIOSputs(SB)) _wait: CLR(rAX) /* wait for almost any key */ BIOSCALL(0x16) _reset: CLR(rBX) /* set ES segment for BIOS area */ MTSR(rBX, rES) LWI(0x0472, rBX) /* warm-start code address */ LWI(0x1234, rAX) /* warm-start code */ POKEW /* MOVW AX, ES:[BX] */ FARJUMP16(0xFFFF, 0x0000) /* reset */ /* * Read a sector from a disc. On entry: * rDX:rAX sector number * rES:rBX buffer address * For BIOSCALL(0x13): * rAH 0x02 * rAL number of sectors to read (1) * rCH low 8 bits of cylinder * rCL high 2 bits of cylinder (7-6), sector (5-0) * rDH head * rDL drive * rES:rBX buffer address */ TEXT BIOSread(SB), $0 LWI(5, rDI) /* retry count (ATAPI ZIPs suck) */ _retry: PUSHA /* may be trashed by BIOSCALL */ PUSHR(rBX) LW(_trksize(SB), rBX) LW(_nheads(SB), rDI) IMUL(rDI, rBX) OR(rBX, rBX) JZ _ioerror _okay: DIV(rBX) /* cylinder -> rAX, track,sector -> rDX */ MW(rAX, rCX) /* save cylinder */ ROLI(0x08, rCX) /* swap rC[HL] */ SHLBI(0x06, rCL) /* move high bits up */ MW(rDX, rAX) CLR(rDX) LW(_trksize(SB), rBX) DIV(rBX) /* head -> rAX, sector -> rDX */ INC(rDX) /* sector numbers are 1-based */ ANDI(0x003F, rDX) /* should not be necessary */ OR(rDX, rCX) MW(rAX, rDX) SHLI(0x08, rDX) /* form head */ LBPB(Xdrive, rDL) /* form drive */ POPR(rBX) LWI(0x0201, rAX) /* form command and sectors */ BIOSCALL(0x13) /* CF set on failure */ JCC _BIOSreadret POPA DEC(rDI) /* too many retries? */ JEQ _ioerror CALL16(dreset(SB)) JMP _retry _ioerror: LWI(ioerror(SB), rSI) CALL16(BIOSputs(SB)) JMP _wait _BIOSreadret: POPA RET TEXT dreset(SB), $0 PUSHA CLR(rAX) /* rAH == 0 == reset disc system */ LBPB(Xdrive, rDL) BIOSCALL(0x13) ORB(rAH, rAH) /* status (0 == success) */ POPA JNE _ioerror RET /* * Output a string to the display. * String argument is in rSI. */ TEXT BIOSputs(SB), $0 PUSHA CLR(rBX) _BIOSputs: LODSB ORB(rAL, rAL) JEQ _BIOSputsret LBI(0x0E, rAH) BIOSCALL(0x10) JMP _BIOSputs _BIOSputsret: POPA RET /* "Bad format or I/O error\r\nPress almost any key to reboot..."*/ TEXT error(SB), $0 BYTE $'B'; BYTE $'a'; BYTE $'d'; BYTE $' '; BYTE $'f'; BYTE $'o'; BYTE $'r'; BYTE $'m'; BYTE $'a'; BYTE $'t'; BYTE $' '; BYTE $'o'; BYTE $'r'; BYTE $' '; /* "I/O error\r\nPress almost any key to reboot..." */ TEXT ioerror(SB), $0 BYTE $'I'; BYTE $'/'; BYTE $'O'; BYTE $' '; BYTE $'e'; BYTE $'r'; BYTE $'r'; BYTE $'o'; BYTE $'r'; BYTE $'\r';BYTE $'\n'; BYTE $'P'; BYTE $'r'; BYTE $'e'; BYTE $'s'; BYTE $'s'; BYTE $' '; BYTE $'a'; BYTE $' '; BYTE $'k'; BYTE $'e'; BYTE $'y'; BYTE $' '; BYTE $'t'; BYTE $'o'; BYTE $' '; BYTE $'r'; BYTE $'e'; BYTE $'b'; BYTE $'o'; BYTE $'o'; BYTE $'t'; BYTE $'.'; BYTE $'.'; BYTE $'.'; BYTE $'\z'; #ifdef USEBCOM /* "B COM" */ TEXT bootfile(SB), $0 BYTE $'B'; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $'C'; BYTE $'O'; BYTE $'M'; BYTE $'\z'; #else /* "9LOAD " */ TEXT bootfile(SB), $0 BYTE $'9'; BYTE $'L'; BYTE $'O'; BYTE $'A'; BYTE $'D'; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $' '; BYTE $'\z'; #endif /* USEBCOM */ /* "PBS..." */ TEXT confidence(SB), $0 BYTE $'P'; BYTE $'B'; BYTE $'S'; BYTE $'1'; BYTE $'.'; BYTE $'.'; BYTE $'.'; BYTE $'\z';