ref: 606901dc5da9cb09acb5593c5cf74ce1b52ca6e2
dir: /man/8/rdbgsrv/
.TH RDBGSRV 8 .SH NAME rdbgsrv \- remote debug server .SH SYNOPSIS .B "bind -b '#t' /dev" .PP .B auxi/rdbgsrv [ .BI \-d n ] [ .BI \-s baud ] [ .BI \-f dev ] .I mountpoint .SH DESCRIPTION .I Rdbgsrv interposes itself between .I dev (default: .BR /dev/eia0 ) and .I mountpoint to convey 9P messages via the serial port to and from a 9P server program running on a board running native Inferno. The .B \-f option specifies the serial device; the default is .BR /dev/eia0 . The .B \-s option sets the line speed; the default is 38400 baud. The .B \-d option selects debugging options by a bit mask: 1, print trace of 9P message types; 2, print actual 9P message contents. .PP The monitor program on the board must be started first. .I Rdbgsrv writes the two byte message .BR go , and keeps reading the device until it sees the reply .BR ok . It then attempts to mount the exported name space, and copies 9P messages to and from the device. .PP Once .I rdbgsrv is running, any device files provided by the program will be visible at .IR mountpoint . .SH SOURCE .B /appl/auxi/rdbgsrv.b .SH SEE ALSO .IR styxchat (8) .SH BUGS No error recovery is applied, let alone error correction.