ref: 09d11c64e5014a64dbc7b807899b3dd2581fe26f
dir: /man/10/dmainit/
.TH DMAINIT 10.2 x86 .SH NAME dmainit, dmasetup, dmadone, dmaend, dmacount \- platform-specific DMA support .SH SYNOPSIS .ta \w'\fLushort 'u .B void dmainit(int chan) .PP .B long dmasetup(int chan, void *va, long len, int isread) .PP .B int dmadone(int chan) .PP .B void dmaend(int chan) .PP .B int dmacount(int chan) .PP .SH DESCRIPTION These functions manage DMA on a bus that uses ISA-style DMA controllers. They were originally devised for the x86 platform, but the same interface, and similar code, is used by other platforms that use similar controllers. They compensate as best they can for the limitations of older DMA implementations (eg, alignment, boundary and length restrictions). There are 8 DMA channels: 0 to 3 are byte-oriented; 4 to 7 are word-oriented (16-bit words). .PP .I Dmainit must be called early in a driver's initialisation to prepare .I chan for use. Amongst other things, it allocates a page-sized buffer to help circumvent hardware restrictions on DMA addressing. .PP .I Dmasetup prepares DMA channel .IR chan for a transfer between a device configured to use it and the virtual address .IR va . (The transfer is started by issuing a command to the device.) If .I va lies outside the kernel address space, the transfer crosses a 64k boundary, or exceeds the 16 Mbyte limit imposed by some DMA controllers, the transfer will be split into page-sized transfers using the buffer previously allocated by .IR dmainit . If .I isread is true (non-zero), data is to be transferred from .I chan to .IR va ; if false, data is transferred from .I va to .IR chan . In all cases, .I dmasetup returns the number of bytes to be transferred. That value (rather than .IR len ) must be given to the device in the read or write request that starts the transfer. .PP .I Dmadone returns true (non-zero) if .I chan is idle. .PP .I Dmaend must be called at the end of every DMA operation. It disables .IR chan , preventing further access to the previously associated memory and, if a low-memory buffer was required for input, transfers its contents to the appropriate part of the target buffer. .PP .I Dmacount returns the number of bytes that were last transferred by channel .IR chan . The count is always even for word-oriented DMA channels. .SH SOURCE .B /os/pc/dma.c