ref: ca70040abf8d8ab2cb03575f65131ad8ef8f12a1
dir: /third_party/boringssl/src/STYLE.md/
# BoringSSL Style Guide
BoringSSL usually follows the
[Google C++ style guide](https://google.github.io/styleguide/cppguide.html),
The rest of this document describes differences and clarifications on
top of the base guide.
## Legacy code
As a derivative of OpenSSL, BoringSSL contains a lot of legacy code that
does not follow this style guide. Particularly where public API is
concerned, balance consistency within a module with the benefits of a
given rule. Module-wide deviations on naming should be respected while
integer and return value conventions take precedence over consistency.
Modules from OpenSSL's legacy ASN.1 and X.509 stack are retained for
compatibility and left largely unmodified. To ease importing patches from
upstream, they match OpenSSL's new indentation style. For Emacs,
`doc/openssl-c-indent.el` from OpenSSL may be helpful in this.
## Language
The majority of the project is in C, so C++-specific rules in the
Google style guide do not apply. Support for C99 features depends on
our target platforms. Typically, Chromium's target MSVC is the most
restrictive.
Variable declarations in the middle of a function or inside a `for` loop are
allowed and preferred where possible. Note that the common `goto err` cleanup
pattern requires lifting some variable declarations.
Comments should be `// C99-style` for consistency with C++.
When declaring pointer types, `*` should be placed next to the variable name,
not the type. So
uint8_t *ptr;
not
uint8_t* ptr;
Rather than `malloc()` and `free()`, use the wrappers `OPENSSL_malloc()`
and `OPENSSL_free()`. Use the standard C `assert()` function freely.
Use the following wrappers, found in `crypto/internal.h` instead of the
corresponding C standard library functions. They behave the same but avoid
confusing undefined behavior.
* `OPENSSL_memchr`
* `OPENSSL_memcmp`
* `OPENSSL_memcpy`
* `OPENSSL_memmove`
* `OPENSSL_memset`
For new constants, prefer enums when the values are sequential and typed
constants for flags. If adding values to an existing set of `#define`s,
continue with `#define`.
## libssl
libssl was originally written in C but is being incrementally rewritten in
C++11. As of writing, much of the style matches our C conventions rather than
Google C++. Additionally, libssl on Linux currently may not depend on the C++
runtime. See the C++ utilities in `ssl/internal.h` for replacements for
problematic C++ constructs. The `util/check_imported_libraries.go` script may be
used with a shared library build to check if a new construct is okay.
If unsure, match surrounding code. Discrepancies between it and Google C++ style
will be fixed over time.
## Formatting
Single-statement blocks are not allowed. All conditions and loops must
use braces:
if (foo) {
do_something();
}
not
if (foo)
do_something();
## Integers
Prefer using explicitly-sized integers where appropriate rather than
generic C ones. For instance, to represent a byte, use `uint8_t`, not
`unsigned char`. Likewise, represent a two-byte field as `uint16_t`, not
`unsigned short`.
Sizes are represented as `size_t`.
Within a struct that is retained across the lifetime of an SSL
connection, if bounds of a size are known and it's easy, use a smaller
integer type like `uint8_t`. This is a "free" connection footprint
optimization for servers. Don't make code significantly more complex for
it, and do still check the bounds when passing in and out of the
struct. This narrowing should not propagate to local variables and
function parameters.
When doing arithmetic, account for overflow conditions.
Except with platform APIs, do not use `ssize_t`. MSVC lacks it, and
prefer out-of-band error signaling for `size_t` (see Return values).
## Naming
Follow Google naming conventions in C++ files. In C files, use the
following naming conventions for consistency with existing OpenSSL and C
styles:
Define structs with typedef named `TYPE_NAME`. The corresponding struct
should be named `struct type_name_st`.
Name public functions as `MODULE_function_name`, unless the module
already uses a different naming scheme for legacy reasons. The module
name should be a type name if the function is a method of a particular
type.
Some types are allocated within the library while others are initialized
into a struct allocated by the caller, often on the stack. Name these
functions `TYPE_NAME_new`/`TYPE_NAME_free` and
`TYPE_NAME_init`/`TYPE_NAME_cleanup`, respectively. All `TYPE_NAME_free`
functions must do nothing on `NULL` input.
If a variable is the length of a pointer value, it has the suffix
`_len`. An output parameter is named `out` or has an `out_` prefix. For
instance, For instance:
uint8_t *out,
size_t *out_len,
const uint8_t *in,
size_t in_len,
Name public headers like `include/openssl/evp.h` with header guards like
`OPENSSL_HEADER_EVP_H`. Name internal headers like
`crypto/ec/internal.h` with header guards like
`OPENSSL_HEADER_EC_INTERNAL_H`.
Name enums like `enum unix_hacker_t`. For instance:
enum should_free_handshake_buffer_t {
free_handshake_buffer,
dont_free_handshake_buffer,
};
## Return values
As even `malloc` may fail in BoringSSL, the vast majority of functions
will have a failure case. Functions should return `int` with one on
success and zero on error. Do not overload the return value to both
signal success/failure and output an integer. For example:
OPENSSL_EXPORT int CBS_get_u16(CBS *cbs, uint16_t *out);
If a function needs more than a true/false result code, define an enum
rather than arbitrarily assigning meaning to int values.
If a function outputs a pointer to an object on success and there are no
other outputs, return the pointer directly and `NULL` on error.
## Parameters
Where not constrained by legacy code, parameter order should be:
1. context parameters
2. output parameters
3. input parameters
For example,
/* CBB_add_asn sets |*out_contents| to a |CBB| into which the contents of an
* ASN.1 object can be written. The |tag| argument will be used as the tag for
* the object. It returns one on success or zero on error. */
OPENSSL_EXPORT int CBB_add_asn1(CBB *cbb, CBB *out_contents, unsigned tag);
## Documentation
All public symbols must have a documentation comment in their header
file. The style is based on that of Go. The first sentence begins with
the symbol name, optionally prefixed with "A" or "An". Apart from the
initial mention of symbol, references to other symbols or parameter
names should be surrounded by |pipes|.
Documentation should be concise but completely describe the exposed
behavior of the function. Pay special note to success/failure behaviors
and caller obligations on object lifetimes. If this sacrifices
conciseness, consider simplifying the function's behavior.
// EVP_DigestVerifyUpdate appends |len| bytes from |data| to the data which
// will be verified by |EVP_DigestVerifyFinal|. It returns one on success and
// zero otherwise.
OPENSSL_EXPORT int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *data,
size_t len);
Explicitly mention any surprising edge cases or deviations from common
return value patterns in legacy functions.
// RSA_private_encrypt encrypts |flen| bytes from |from| with the private key in
// |rsa| and writes the encrypted data to |to|. The |to| buffer must have at
// least |RSA_size| bytes of space. It returns the number of bytes written, or
// -1 on error. The |padding| argument must be one of the |RSA_*_PADDING|
// values. If in doubt, |RSA_PKCS1_PADDING| is the most common.
//
// WARNING: this function is dangerous because it breaks the usual return value
// convention. Use |RSA_sign_raw| instead.
OPENSSL_EXPORT int RSA_private_encrypt(int flen, const uint8_t *from,
uint8_t *to, RSA *rsa, int padding);
Document private functions in their `internal.h` header or, if static,
where defined.
## Build logic
BoringSSL is used by many projects with many different build tools.
Reimplementing and maintaining build logic in each downstream build is
cumbersome, so build logic should be avoided where possible. Platform-specific
files should be excluded by wrapping the contents in `#ifdef`s, rather than
computing platform-specific file lists. Generated source files such as perlasm
and `err_data.c` may be used in the standalone CMake build but, for downstream
builds, they should be pre-generated in `generate_build_files.py`.