ref: 2cdc6577ef8a251bf1740439cf5bfc47050dab41
dir: /third_party/boringssl/src/crypto/fipsmodule/ec/simple.c/
/* Originally written by Bodo Moeller for the OpenSSL project.
* ====================================================================
* Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
*
* Portions of the attached software ("Contribution") are developed by
* SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
*
* The Contribution is licensed pursuant to the OpenSSL open source
* license provided above.
*
* The elliptic curve binary polynomial software is originally written by
* Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
* Laboratories. */
#include <openssl/ec.h>
#include <string.h>
#include <openssl/bn.h>
#include <openssl/err.h>
#include <openssl/mem.h>
#include "internal.h"
#include "../../internal.h"
// Most method functions in this file are designed to work with non-trivial
// representations of field elements if necessary (see ecp_mont.c): while
// standard modular addition and subtraction are used, the field_mul and
// field_sqr methods will be used for multiplication, and field_encode and
// field_decode (if defined) will be used for converting between
// representations.
//
// Functions here specifically assume that if a non-trivial representation is
// used, it is a Montgomery representation (i.e. 'encoding' means multiplying
// by some factor R).
int ec_GFp_simple_group_init(EC_GROUP *group) {
BN_init(&group->field);
group->a_is_minus3 = 0;
return 1;
}
void ec_GFp_simple_group_finish(EC_GROUP *group) {
BN_free(&group->field);
}
int ec_GFp_simple_group_set_curve(EC_GROUP *group, const BIGNUM *p,
const BIGNUM *a, const BIGNUM *b,
BN_CTX *ctx) {
// p must be a prime > 3
if (BN_num_bits(p) <= 2 || !BN_is_odd(p)) {
OPENSSL_PUT_ERROR(EC, EC_R_INVALID_FIELD);
return 0;
}
int ret = 0;
BN_CTX_start(ctx);
BIGNUM *tmp = BN_CTX_get(ctx);
if (tmp == NULL) {
goto err;
}
// group->field
if (!BN_copy(&group->field, p)) {
goto err;
}
BN_set_negative(&group->field, 0);
// Store the field in minimal form, so it can be used with |BN_ULONG| arrays.
bn_set_minimal_width(&group->field);
if (!ec_bignum_to_felem(group, &group->a, a) ||
!ec_bignum_to_felem(group, &group->b, b) ||
!ec_bignum_to_felem(group, &group->one, BN_value_one())) {
goto err;
}
// group->a_is_minus3
if (!BN_copy(tmp, a) ||
!BN_add_word(tmp, 3)) {
goto err;
}
group->a_is_minus3 = (0 == BN_cmp(tmp, &group->field));
ret = 1;
err:
BN_CTX_end(ctx);
return ret;
}
int ec_GFp_simple_group_get_curve(const EC_GROUP *group, BIGNUM *p, BIGNUM *a,
BIGNUM *b) {
if ((p != NULL && !BN_copy(p, &group->field)) ||
(a != NULL && !ec_felem_to_bignum(group, a, &group->a)) ||
(b != NULL && !ec_felem_to_bignum(group, b, &group->b))) {
return 0;
}
return 1;
}
void ec_GFp_simple_point_init(EC_RAW_POINT *point) {
OPENSSL_memset(&point->X, 0, sizeof(EC_FELEM));
OPENSSL_memset(&point->Y, 0, sizeof(EC_FELEM));
OPENSSL_memset(&point->Z, 0, sizeof(EC_FELEM));
}
void ec_GFp_simple_point_copy(EC_RAW_POINT *dest, const EC_RAW_POINT *src) {
OPENSSL_memcpy(&dest->X, &src->X, sizeof(EC_FELEM));
OPENSSL_memcpy(&dest->Y, &src->Y, sizeof(EC_FELEM));
OPENSSL_memcpy(&dest->Z, &src->Z, sizeof(EC_FELEM));
}
void ec_GFp_simple_point_set_to_infinity(const EC_GROUP *group,
EC_RAW_POINT *point) {
// Although it is strictly only necessary to zero Z, we zero the entire point
// in case |point| was stack-allocated and yet to be initialized.
ec_GFp_simple_point_init(point);
}
void ec_GFp_simple_invert(const EC_GROUP *group, EC_RAW_POINT *point) {
ec_felem_neg(group, &point->Y, &point->Y);
}
int ec_GFp_simple_is_at_infinity(const EC_GROUP *group,
const EC_RAW_POINT *point) {
return ec_felem_non_zero_mask(group, &point->Z) == 0;
}
int ec_GFp_simple_is_on_curve(const EC_GROUP *group,
const EC_RAW_POINT *point) {
// We have a curve defined by a Weierstrass equation
// y^2 = x^3 + a*x + b.
// The point to consider is given in Jacobian projective coordinates
// where (X, Y, Z) represents (x, y) = (X/Z^2, Y/Z^3).
// Substituting this and multiplying by Z^6 transforms the above equation
// into
// Y^2 = X^3 + a*X*Z^4 + b*Z^6.
// To test this, we add up the right-hand side in 'rh'.
//
// This function may be used when double-checking the secret result of a point
// multiplication, so we proceed in constant-time.
void (*const felem_mul)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a,
const EC_FELEM *b) = group->meth->felem_mul;
void (*const felem_sqr)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a) =
group->meth->felem_sqr;
// rh := X^2
EC_FELEM rh;
felem_sqr(group, &rh, &point->X);
EC_FELEM tmp, Z4, Z6;
felem_sqr(group, &tmp, &point->Z);
felem_sqr(group, &Z4, &tmp);
felem_mul(group, &Z6, &Z4, &tmp);
// rh := rh + a*Z^4
if (group->a_is_minus3) {
ec_felem_add(group, &tmp, &Z4, &Z4);
ec_felem_add(group, &tmp, &tmp, &Z4);
ec_felem_sub(group, &rh, &rh, &tmp);
} else {
felem_mul(group, &tmp, &Z4, &group->a);
ec_felem_add(group, &rh, &rh, &tmp);
}
// rh := (rh + a*Z^4)*X
felem_mul(group, &rh, &rh, &point->X);
// rh := rh + b*Z^6
felem_mul(group, &tmp, &group->b, &Z6);
ec_felem_add(group, &rh, &rh, &tmp);
// 'lh' := Y^2
felem_sqr(group, &tmp, &point->Y);
ec_felem_sub(group, &tmp, &tmp, &rh);
BN_ULONG not_equal = ec_felem_non_zero_mask(group, &tmp);
// If Z = 0, the point is infinity, which is always on the curve.
BN_ULONG not_infinity = ec_felem_non_zero_mask(group, &point->Z);
return 1 & ~(not_infinity & not_equal);
}
int ec_GFp_simple_points_equal(const EC_GROUP *group, const EC_RAW_POINT *a,
const EC_RAW_POINT *b) {
// This function is implemented in constant-time for two reasons. First,
// although EC points are usually public, their Jacobian Z coordinates may be
// secret, or at least are not obviously public. Second, more complex
// protocols will sometimes manipulate secret points.
//
// This does mean that we pay a 6M+2S Jacobian comparison when comparing two
// publicly affine points costs no field operations at all. If needed, we can
// restore this optimization by keeping better track of affine vs. Jacobian
// forms. See https://crbug.com/boringssl/326.
// If neither |a| or |b| is infinity, we have to decide whether
// (X_a/Z_a^2, Y_a/Z_a^3) = (X_b/Z_b^2, Y_b/Z_b^3),
// or equivalently, whether
// (X_a*Z_b^2, Y_a*Z_b^3) = (X_b*Z_a^2, Y_b*Z_a^3).
void (*const felem_mul)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a,
const EC_FELEM *b) = group->meth->felem_mul;
void (*const felem_sqr)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a) =
group->meth->felem_sqr;
EC_FELEM tmp1, tmp2, Za23, Zb23;
felem_sqr(group, &Zb23, &b->Z); // Zb23 = Z_b^2
felem_mul(group, &tmp1, &a->X, &Zb23); // tmp1 = X_a * Z_b^2
felem_sqr(group, &Za23, &a->Z); // Za23 = Z_a^2
felem_mul(group, &tmp2, &b->X, &Za23); // tmp2 = X_b * Z_a^2
ec_felem_sub(group, &tmp1, &tmp1, &tmp2);
const BN_ULONG x_not_equal = ec_felem_non_zero_mask(group, &tmp1);
felem_mul(group, &Zb23, &Zb23, &b->Z); // Zb23 = Z_b^3
felem_mul(group, &tmp1, &a->Y, &Zb23); // tmp1 = Y_a * Z_b^3
felem_mul(group, &Za23, &Za23, &a->Z); // Za23 = Z_a^3
felem_mul(group, &tmp2, &b->Y, &Za23); // tmp2 = Y_b * Z_a^3
ec_felem_sub(group, &tmp1, &tmp1, &tmp2);
const BN_ULONG y_not_equal = ec_felem_non_zero_mask(group, &tmp1);
const BN_ULONG x_and_y_equal = ~(x_not_equal | y_not_equal);
const BN_ULONG a_not_infinity = ec_felem_non_zero_mask(group, &a->Z);
const BN_ULONG b_not_infinity = ec_felem_non_zero_mask(group, &b->Z);
const BN_ULONG a_and_b_infinity = ~(a_not_infinity | b_not_infinity);
const BN_ULONG equal =
a_and_b_infinity | (a_not_infinity & b_not_infinity & x_and_y_equal);
return equal & 1;
}
int ec_affine_jacobian_equal(const EC_GROUP *group, const EC_AFFINE *a,
const EC_RAW_POINT *b) {
// If |b| is not infinity, we have to decide whether
// (X_a, Y_a) = (X_b/Z_b^2, Y_b/Z_b^3),
// or equivalently, whether
// (X_a*Z_b^2, Y_a*Z_b^3) = (X_b, Y_b).
void (*const felem_mul)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a,
const EC_FELEM *b) = group->meth->felem_mul;
void (*const felem_sqr)(const EC_GROUP *, EC_FELEM *r, const EC_FELEM *a) =
group->meth->felem_sqr;
EC_FELEM tmp, Zb2;
felem_sqr(group, &Zb2, &b->Z); // Zb2 = Z_b^2
felem_mul(group, &tmp, &a->X, &Zb2); // tmp = X_a * Z_b^2
ec_felem_sub(group, &tmp, &tmp, &b->X);
const BN_ULONG x_not_equal = ec_felem_non_zero_mask(group, &tmp);
felem_mul(group, &tmp, &a->Y, &Zb2); // tmp = Y_a * Z_b^2
felem_mul(group, &tmp, &tmp, &b->Z); // tmp = Y_a * Z_b^3
ec_felem_sub(group, &tmp, &tmp, &b->Y);
const BN_ULONG y_not_equal = ec_felem_non_zero_mask(group, &tmp);
const BN_ULONG x_and_y_equal = ~(x_not_equal | y_not_equal);
const BN_ULONG b_not_infinity = ec_felem_non_zero_mask(group, &b->Z);
const BN_ULONG equal = b_not_infinity & x_and_y_equal;
return equal & 1;
}
int ec_GFp_simple_cmp_x_coordinate(const EC_GROUP *group, const EC_RAW_POINT *p,
const EC_SCALAR *r) {
if (ec_GFp_simple_is_at_infinity(group, p)) {
// |ec_get_x_coordinate_as_scalar| will check this internally, but this way
// we do not push to the error queue.
return 0;
}
EC_SCALAR x;
return ec_get_x_coordinate_as_scalar(group, &x, p) &&
ec_scalar_equal_vartime(group, &x, r);
}
void ec_GFp_simple_felem_to_bytes(const EC_GROUP *group, uint8_t *out,
size_t *out_len, const EC_FELEM *in) {
size_t len = BN_num_bytes(&group->field);
for (size_t i = 0; i < len; i++) {
out[i] = in->bytes[len - 1 - i];
}
*out_len = len;
}
int ec_GFp_simple_felem_from_bytes(const EC_GROUP *group, EC_FELEM *out,
const uint8_t *in, size_t len) {
if (len != BN_num_bytes(&group->field)) {
OPENSSL_PUT_ERROR(EC, EC_R_DECODE_ERROR);
return 0;
}
OPENSSL_memset(out, 0, sizeof(EC_FELEM));
for (size_t i = 0; i < len; i++) {
out->bytes[i] = in[len - 1 - i];
}
if (!bn_less_than_words(out->words, group->field.d, group->field.width)) {
OPENSSL_PUT_ERROR(EC, EC_R_DECODE_ERROR);
return 0;
}
return 1;
}