ref: 2cdc6577ef8a251bf1740439cf5bfc47050dab41
dir: /third_party/boringssl/src/crypto/fipsmodule/aes/asm/vpaes-x86.pl/
#! /usr/bin/env perl
# Copyright 2011-2016 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the OpenSSL license (the "License"). You may not use
# this file except in compliance with the License. You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html
######################################################################
## Constant-time SSSE3 AES core implementation.
## version 0.1
##
## By Mike Hamburg (Stanford University), 2009
## Public domain.
##
## For details see http://shiftleft.org/papers/vector_aes/ and
## http://crypto.stanford.edu/vpaes/.
######################################################################
# September 2011.
#
# Port vpaes-x86_64.pl as 32-bit "almost" drop-in replacement for
# aes-586.pl. "Almost" refers to the fact that AES_cbc_encrypt
# doesn't handle partial vectors (doesn't have to if called from
# EVP only). "Drop-in" implies that this module doesn't share key
# schedule structure with the original nor does it make assumption
# about its alignment...
#
# Performance summary. aes-586.pl column lists large-block CBC
# encrypt/decrypt/with-hyper-threading-off(*) results in cycles per
# byte processed with 128-bit key, and vpaes-x86.pl column - [also
# large-block CBC] encrypt/decrypt.
#
# aes-586.pl vpaes-x86.pl
#
# Core 2(**) 28.1/41.4/18.3 21.9/25.2(***)
# Nehalem 27.9/40.4/18.1 10.2/11.9
# Atom 70.7/92.1/60.1 61.1/75.4(***)
# Silvermont 45.4/62.9/24.1 49.2/61.1(***)
#
# (*) "Hyper-threading" in the context refers rather to cache shared
# among multiple cores, than to specifically Intel HTT. As vast
# majority of contemporary cores share cache, slower code path
# is common place. In other words "with-hyper-threading-off"
# results are presented mostly for reference purposes.
#
# (**) "Core 2" refers to initial 65nm design, a.k.a. Conroe.
#
# (***) Less impressive improvement on Core 2 and Atom is due to slow
# pshufb, yet it's respectable +28%/64% improvement on Core 2
# and +15% on Atom (as implied, over "hyper-threading-safe"
# code path).
#
# <appro@openssl.org>
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
push(@INC,"${dir}","${dir}../../../perlasm");
require "x86asm.pl";
$output = pop;
open OUT,">$output";
*STDOUT=*OUT;
&asm_init($ARGV[0],$x86only = $ARGV[$#ARGV] eq "386");
$PREFIX="vpaes";
my ($round, $base, $magic, $key, $const, $inp, $out)=
("eax", "ebx", "ecx", "edx","ebp", "esi","edi");
&preprocessor_ifdef("BORINGSSL_DISPATCH_TEST")
&external_label("BORINGSSL_function_hit");
&preprocessor_endif();
&static_label("_vpaes_consts");
&static_label("_vpaes_schedule_low_round");
&set_label("_vpaes_consts",64);
$k_inv=-0x30; # inv, inva
&data_word(0x0D080180,0x0E05060F,0x0A0B0C02,0x04070309);
&data_word(0x0F0B0780,0x01040A06,0x02050809,0x030D0E0C);
$k_s0F=-0x10; # s0F
&data_word(0x0F0F0F0F,0x0F0F0F0F,0x0F0F0F0F,0x0F0F0F0F);
$k_ipt=0x00; # input transform (lo, hi)
&data_word(0x5A2A7000,0xC2B2E898,0x52227808,0xCABAE090);
&data_word(0x317C4D00,0x4C01307D,0xB0FDCC81,0xCD80B1FC);
$k_sb1=0x20; # sb1u, sb1t
&data_word(0xCB503E00,0xB19BE18F,0x142AF544,0xA5DF7A6E);
&data_word(0xFAE22300,0x3618D415,0x0D2ED9EF,0x3BF7CCC1);
$k_sb2=0x40; # sb2u, sb2t
&data_word(0x0B712400,0xE27A93C6,0xBC982FCD,0x5EB7E955);
&data_word(0x0AE12900,0x69EB8840,0xAB82234A,0xC2A163C8);
$k_sbo=0x60; # sbou, sbot
&data_word(0x6FBDC700,0xD0D26D17,0xC502A878,0x15AABF7A);
&data_word(0x5FBB6A00,0xCFE474A5,0x412B35FA,0x8E1E90D1);
$k_mc_forward=0x80; # mc_forward
&data_word(0x00030201,0x04070605,0x080B0A09,0x0C0F0E0D);
&data_word(0x04070605,0x080B0A09,0x0C0F0E0D,0x00030201);
&data_word(0x080B0A09,0x0C0F0E0D,0x00030201,0x04070605);
&data_word(0x0C0F0E0D,0x00030201,0x04070605,0x080B0A09);
$k_mc_backward=0xc0; # mc_backward
&data_word(0x02010003,0x06050407,0x0A09080B,0x0E0D0C0F);
&data_word(0x0E0D0C0F,0x02010003,0x06050407,0x0A09080B);
&data_word(0x0A09080B,0x0E0D0C0F,0x02010003,0x06050407);
&data_word(0x06050407,0x0A09080B,0x0E0D0C0F,0x02010003);
$k_sr=0x100; # sr
&data_word(0x03020100,0x07060504,0x0B0A0908,0x0F0E0D0C);
&data_word(0x0F0A0500,0x030E0904,0x07020D08,0x0B06010C);
&data_word(0x0B020900,0x0F060D04,0x030A0108,0x070E050C);
&data_word(0x070A0D00,0x0B0E0104,0x0F020508,0x0306090C);
$k_rcon=0x140; # rcon
&data_word(0xAF9DEEB6,0x1F8391B9,0x4D7C7D81,0x702A9808);
$k_s63=0x150; # s63: all equal to 0x63 transformed
&data_word(0x5B5B5B5B,0x5B5B5B5B,0x5B5B5B5B,0x5B5B5B5B);
$k_opt=0x160; # output transform
&data_word(0xD6B66000,0xFF9F4929,0xDEBE6808,0xF7974121);
&data_word(0x50BCEC00,0x01EDBD51,0xB05C0CE0,0xE10D5DB1);
$k_deskew=0x180; # deskew tables: inverts the sbox's "skew"
&data_word(0x47A4E300,0x07E4A340,0x5DBEF91A,0x1DFEB95A);
&data_word(0x83EA6900,0x5F36B5DC,0xF49D1E77,0x2841C2AB);
##
## Decryption stuff
## Key schedule constants
##
$k_dksd=0x1a0; # decryption key schedule: invskew x*D
&data_word(0xA3E44700,0xFEB91A5D,0x5A1DBEF9,0x0740E3A4);
&data_word(0xB5368300,0x41C277F4,0xAB289D1E,0x5FDC69EA);
$k_dksb=0x1c0; # decryption key schedule: invskew x*B
&data_word(0x8550D500,0x9A4FCA1F,0x1CC94C99,0x03D65386);
&data_word(0xB6FC4A00,0x115BEDA7,0x7E3482C8,0xD993256F);
$k_dkse=0x1e0; # decryption key schedule: invskew x*E + 0x63
&data_word(0x1FC9D600,0xD5031CCA,0x994F5086,0x53859A4C);
&data_word(0x4FDC7BE8,0xA2319605,0x20B31487,0xCD5EF96A);
$k_dks9=0x200; # decryption key schedule: invskew x*9
&data_word(0x7ED9A700,0xB6116FC8,0x82255BFC,0x4AED9334);
&data_word(0x27143300,0x45765162,0xE9DAFDCE,0x8BB89FAC);
##
## Decryption stuff
## Round function constants
##
$k_dipt=0x220; # decryption input transform
&data_word(0x0B545F00,0x0F505B04,0x114E451A,0x154A411E);
&data_word(0x60056500,0x86E383E6,0xF491F194,0x12771772);
$k_dsb9=0x240; # decryption sbox output *9*u, *9*t
&data_word(0x9A86D600,0x851C0353,0x4F994CC9,0xCAD51F50);
&data_word(0xECD74900,0xC03B1789,0xB2FBA565,0x725E2C9E);
$k_dsbd=0x260; # decryption sbox output *D*u, *D*t
&data_word(0xE6B1A200,0x7D57CCDF,0x882A4439,0xF56E9B13);
&data_word(0x24C6CB00,0x3CE2FAF7,0x15DEEFD3,0x2931180D);
$k_dsbb=0x280; # decryption sbox output *B*u, *B*t
&data_word(0x96B44200,0xD0226492,0xB0F2D404,0x602646F6);
&data_word(0xCD596700,0xC19498A6,0x3255AA6B,0xF3FF0C3E);
$k_dsbe=0x2a0; # decryption sbox output *E*u, *E*t
&data_word(0x26D4D000,0x46F29296,0x64B4F6B0,0x22426004);
&data_word(0xFFAAC100,0x0C55A6CD,0x98593E32,0x9467F36B);
$k_dsbo=0x2c0; # decryption sbox final output
&data_word(0x7EF94000,0x1387EA53,0xD4943E2D,0xC7AA6DB9);
&data_word(0x93441D00,0x12D7560F,0xD8C58E9C,0xCA4B8159);
&asciz ("Vector Permutation AES for x86/SSSE3, Mike Hamburg (Stanford University)");
&align (64);
&function_begin_B("_vpaes_preheat");
&add ($const,&DWP(0,"esp"));
&movdqa ("xmm7",&QWP($k_inv,$const));
&movdqa ("xmm6",&QWP($k_s0F,$const));
&ret ();
&function_end_B("_vpaes_preheat");
##
## _aes_encrypt_core
##
## AES-encrypt %xmm0.
##
## Inputs:
## %xmm0 = input
## %xmm6-%xmm7 as in _vpaes_preheat
## (%edx) = scheduled keys
##
## Output in %xmm0
## Clobbers %xmm1-%xmm5, %eax, %ebx, %ecx, %edx
##
##
&function_begin_B("_vpaes_encrypt_core");
&mov ($magic,16);
&mov ($round,&DWP(240,$key));
&movdqa ("xmm1","xmm6")
&movdqa ("xmm2",&QWP($k_ipt,$const));
&pandn ("xmm1","xmm0");
&pand ("xmm0","xmm6");
&movdqu ("xmm5",&QWP(0,$key));
&pshufb ("xmm2","xmm0");
&movdqa ("xmm0",&QWP($k_ipt+16,$const));
&pxor ("xmm2","xmm5");
&psrld ("xmm1",4);
&add ($key,16);
&pshufb ("xmm0","xmm1");
&lea ($base,&DWP($k_mc_backward,$const));
&pxor ("xmm0","xmm2");
&jmp (&label("enc_entry"));
&set_label("enc_loop",16);
# middle of middle round
&movdqa ("xmm4",&QWP($k_sb1,$const)); # 4 : sb1u
&movdqa ("xmm0",&QWP($k_sb1+16,$const));# 0 : sb1t
&pshufb ("xmm4","xmm2"); # 4 = sb1u
&pshufb ("xmm0","xmm3"); # 0 = sb1t
&pxor ("xmm4","xmm5"); # 4 = sb1u + k
&movdqa ("xmm5",&QWP($k_sb2,$const)); # 4 : sb2u
&pxor ("xmm0","xmm4"); # 0 = A
&movdqa ("xmm1",&QWP(-0x40,$base,$magic));# .Lk_mc_forward[]
&pshufb ("xmm5","xmm2"); # 4 = sb2u
&movdqa ("xmm2",&QWP($k_sb2+16,$const));# 2 : sb2t
&movdqa ("xmm4",&QWP(0,$base,$magic)); # .Lk_mc_backward[]
&pshufb ("xmm2","xmm3"); # 2 = sb2t
&movdqa ("xmm3","xmm0"); # 3 = A
&pxor ("xmm2","xmm5"); # 2 = 2A
&pshufb ("xmm0","xmm1"); # 0 = B
&add ($key,16); # next key
&pxor ("xmm0","xmm2"); # 0 = 2A+B
&pshufb ("xmm3","xmm4"); # 3 = D
&add ($magic,16); # next mc
&pxor ("xmm3","xmm0"); # 3 = 2A+B+D
&pshufb ("xmm0","xmm1"); # 0 = 2B+C
&and ($magic,0x30); # ... mod 4
&sub ($round,1); # nr--
&pxor ("xmm0","xmm3"); # 0 = 2A+3B+C+D
&set_label("enc_entry");
# top of round
&movdqa ("xmm1","xmm6"); # 1 : i
&movdqa ("xmm5",&QWP($k_inv+16,$const));# 2 : a/k
&pandn ("xmm1","xmm0"); # 1 = i<<4
&psrld ("xmm1",4); # 1 = i
&pand ("xmm0","xmm6"); # 0 = k
&pshufb ("xmm5","xmm0"); # 2 = a/k
&movdqa ("xmm3","xmm7"); # 3 : 1/i
&pxor ("xmm0","xmm1"); # 0 = j
&pshufb ("xmm3","xmm1"); # 3 = 1/i
&movdqa ("xmm4","xmm7"); # 4 : 1/j
&pxor ("xmm3","xmm5"); # 3 = iak = 1/i + a/k
&pshufb ("xmm4","xmm0"); # 4 = 1/j
&movdqa ("xmm2","xmm7"); # 2 : 1/iak
&pxor ("xmm4","xmm5"); # 4 = jak = 1/j + a/k
&pshufb ("xmm2","xmm3"); # 2 = 1/iak
&movdqa ("xmm3","xmm7"); # 3 : 1/jak
&pxor ("xmm2","xmm0"); # 2 = io
&pshufb ("xmm3","xmm4"); # 3 = 1/jak
&movdqu ("xmm5",&QWP(0,$key));
&pxor ("xmm3","xmm1"); # 3 = jo
&jnz (&label("enc_loop"));
# middle of last round
&movdqa ("xmm4",&QWP($k_sbo,$const)); # 3 : sbou .Lk_sbo
&movdqa ("xmm0",&QWP($k_sbo+16,$const));# 3 : sbot .Lk_sbo+16
&pshufb ("xmm4","xmm2"); # 4 = sbou
&pxor ("xmm4","xmm5"); # 4 = sb1u + k
&pshufb ("xmm0","xmm3"); # 0 = sb1t
&movdqa ("xmm1",&QWP(0x40,$base,$magic));# .Lk_sr[]
&pxor ("xmm0","xmm4"); # 0 = A
&pshufb ("xmm0","xmm1");
&ret ();
&function_end_B("_vpaes_encrypt_core");
##
## Decryption core
##
## Same API as encryption core.
##
&function_begin_B("_vpaes_decrypt_core");
&lea ($base,&DWP($k_dsbd,$const));
&mov ($round,&DWP(240,$key));
&movdqa ("xmm1","xmm6");
&movdqa ("xmm2",&QWP($k_dipt-$k_dsbd,$base));
&pandn ("xmm1","xmm0");
&mov ($magic,$round);
&psrld ("xmm1",4)
&movdqu ("xmm5",&QWP(0,$key));
&shl ($magic,4);
&pand ("xmm0","xmm6");
&pshufb ("xmm2","xmm0");
&movdqa ("xmm0",&QWP($k_dipt-$k_dsbd+16,$base));
&xor ($magic,0x30);
&pshufb ("xmm0","xmm1");
&and ($magic,0x30);
&pxor ("xmm2","xmm5");
&movdqa ("xmm5",&QWP($k_mc_forward+48,$const));
&pxor ("xmm0","xmm2");
&add ($key,16);
&lea ($magic,&DWP($k_sr-$k_dsbd,$base,$magic));
&jmp (&label("dec_entry"));
&set_label("dec_loop",16);
##
## Inverse mix columns
##
&movdqa ("xmm4",&QWP(-0x20,$base)); # 4 : sb9u
&movdqa ("xmm1",&QWP(-0x10,$base)); # 0 : sb9t
&pshufb ("xmm4","xmm2"); # 4 = sb9u
&pshufb ("xmm1","xmm3"); # 0 = sb9t
&pxor ("xmm0","xmm4");
&movdqa ("xmm4",&QWP(0,$base)); # 4 : sbdu
&pxor ("xmm0","xmm1"); # 0 = ch
&movdqa ("xmm1",&QWP(0x10,$base)); # 0 : sbdt
&pshufb ("xmm4","xmm2"); # 4 = sbdu
&pshufb ("xmm0","xmm5"); # MC ch
&pshufb ("xmm1","xmm3"); # 0 = sbdt
&pxor ("xmm0","xmm4"); # 4 = ch
&movdqa ("xmm4",&QWP(0x20,$base)); # 4 : sbbu
&pxor ("xmm0","xmm1"); # 0 = ch
&movdqa ("xmm1",&QWP(0x30,$base)); # 0 : sbbt
&pshufb ("xmm4","xmm2"); # 4 = sbbu
&pshufb ("xmm0","xmm5"); # MC ch
&pshufb ("xmm1","xmm3"); # 0 = sbbt
&pxor ("xmm0","xmm4"); # 4 = ch
&movdqa ("xmm4",&QWP(0x40,$base)); # 4 : sbeu
&pxor ("xmm0","xmm1"); # 0 = ch
&movdqa ("xmm1",&QWP(0x50,$base)); # 0 : sbet
&pshufb ("xmm4","xmm2"); # 4 = sbeu
&pshufb ("xmm0","xmm5"); # MC ch
&pshufb ("xmm1","xmm3"); # 0 = sbet
&pxor ("xmm0","xmm4"); # 4 = ch
&add ($key,16); # next round key
&palignr("xmm5","xmm5",12);
&pxor ("xmm0","xmm1"); # 0 = ch
&sub ($round,1); # nr--
&set_label("dec_entry");
# top of round
&movdqa ("xmm1","xmm6"); # 1 : i
&movdqa ("xmm2",&QWP($k_inv+16,$const));# 2 : a/k
&pandn ("xmm1","xmm0"); # 1 = i<<4
&pand ("xmm0","xmm6"); # 0 = k
&psrld ("xmm1",4); # 1 = i
&pshufb ("xmm2","xmm0"); # 2 = a/k
&movdqa ("xmm3","xmm7"); # 3 : 1/i
&pxor ("xmm0","xmm1"); # 0 = j
&pshufb ("xmm3","xmm1"); # 3 = 1/i
&movdqa ("xmm4","xmm7"); # 4 : 1/j
&pxor ("xmm3","xmm2"); # 3 = iak = 1/i + a/k
&pshufb ("xmm4","xmm0"); # 4 = 1/j
&pxor ("xmm4","xmm2"); # 4 = jak = 1/j + a/k
&movdqa ("xmm2","xmm7"); # 2 : 1/iak
&pshufb ("xmm2","xmm3"); # 2 = 1/iak
&movdqa ("xmm3","xmm7"); # 3 : 1/jak
&pxor ("xmm2","xmm0"); # 2 = io
&pshufb ("xmm3","xmm4"); # 3 = 1/jak
&movdqu ("xmm0",&QWP(0,$key));
&pxor ("xmm3","xmm1"); # 3 = jo
&jnz (&label("dec_loop"));
# middle of last round
&movdqa ("xmm4",&QWP(0x60,$base)); # 3 : sbou
&pshufb ("xmm4","xmm2"); # 4 = sbou
&pxor ("xmm4","xmm0"); # 4 = sb1u + k
&movdqa ("xmm0",&QWP(0x70,$base)); # 0 : sbot
&movdqa ("xmm2",&QWP(0,$magic));
&pshufb ("xmm0","xmm3"); # 0 = sb1t
&pxor ("xmm0","xmm4"); # 0 = A
&pshufb ("xmm0","xmm2");
&ret ();
&function_end_B("_vpaes_decrypt_core");
########################################################
## ##
## AES key schedule ##
## ##
########################################################
&function_begin_B("_vpaes_schedule_core");
&add ($const,&DWP(0,"esp"));
&movdqu ("xmm0",&QWP(0,$inp)); # load key (unaligned)
&movdqa ("xmm2",&QWP($k_rcon,$const)); # load rcon
# input transform
&movdqa ("xmm3","xmm0");
&lea ($base,&DWP($k_ipt,$const));
&movdqa (&QWP(4,"esp"),"xmm2"); # xmm8
&call ("_vpaes_schedule_transform");
&movdqa ("xmm7","xmm0");
&test ($out,$out);
&jnz (&label("schedule_am_decrypting"));
# encrypting, output zeroth round key after transform
&movdqu (&QWP(0,$key),"xmm0");
&jmp (&label("schedule_go"));
&set_label("schedule_am_decrypting");
# decrypting, output zeroth round key after shiftrows
&movdqa ("xmm1",&QWP($k_sr,$const,$magic));
&pshufb ("xmm3","xmm1");
&movdqu (&QWP(0,$key),"xmm3");
&xor ($magic,0x30);
&set_label("schedule_go");
&cmp ($round,192);
&ja (&label("schedule_256"));
&je (&label("schedule_192"));
# 128: fall though
##
## .schedule_128
##
## 128-bit specific part of key schedule.
##
## This schedule is really simple, because all its parts
## are accomplished by the subroutines.
##
&set_label("schedule_128");
&mov ($round,10);
&set_label("loop_schedule_128");
&call ("_vpaes_schedule_round");
&dec ($round);
&jz (&label("schedule_mangle_last"));
&call ("_vpaes_schedule_mangle"); # write output
&jmp (&label("loop_schedule_128"));
##
## .aes_schedule_192
##
## 192-bit specific part of key schedule.
##
## The main body of this schedule is the same as the 128-bit
## schedule, but with more smearing. The long, high side is
## stored in %xmm7 as before, and the short, low side is in
## the high bits of %xmm6.
##
## This schedule is somewhat nastier, however, because each
## round produces 192 bits of key material, or 1.5 round keys.
## Therefore, on each cycle we do 2 rounds and produce 3 round
## keys.
##
&set_label("schedule_192",16);
&movdqu ("xmm0",&QWP(8,$inp)); # load key part 2 (very unaligned)
&call ("_vpaes_schedule_transform"); # input transform
&movdqa ("xmm6","xmm0"); # save short part
&pxor ("xmm4","xmm4"); # clear 4
&movhlps("xmm6","xmm4"); # clobber low side with zeros
&mov ($round,4);
&set_label("loop_schedule_192");
&call ("_vpaes_schedule_round");
&palignr("xmm0","xmm6",8);
&call ("_vpaes_schedule_mangle"); # save key n
&call ("_vpaes_schedule_192_smear");
&call ("_vpaes_schedule_mangle"); # save key n+1
&call ("_vpaes_schedule_round");
&dec ($round);
&jz (&label("schedule_mangle_last"));
&call ("_vpaes_schedule_mangle"); # save key n+2
&call ("_vpaes_schedule_192_smear");
&jmp (&label("loop_schedule_192"));
##
## .aes_schedule_256
##
## 256-bit specific part of key schedule.
##
## The structure here is very similar to the 128-bit
## schedule, but with an additional "low side" in
## %xmm6. The low side's rounds are the same as the
## high side's, except no rcon and no rotation.
##
&set_label("schedule_256",16);
&movdqu ("xmm0",&QWP(16,$inp)); # load key part 2 (unaligned)
&call ("_vpaes_schedule_transform"); # input transform
&mov ($round,7);
&set_label("loop_schedule_256");
&call ("_vpaes_schedule_mangle"); # output low result
&movdqa ("xmm6","xmm0"); # save cur_lo in xmm6
# high round
&call ("_vpaes_schedule_round");
&dec ($round);
&jz (&label("schedule_mangle_last"));
&call ("_vpaes_schedule_mangle");
# low round. swap xmm7 and xmm6
&pshufd ("xmm0","xmm0",0xFF);
&movdqa (&QWP(20,"esp"),"xmm7");
&movdqa ("xmm7","xmm6");
&call ("_vpaes_schedule_low_round");
&movdqa ("xmm7",&QWP(20,"esp"));
&jmp (&label("loop_schedule_256"));
##
## .aes_schedule_mangle_last
##
## Mangler for last round of key schedule
## Mangles %xmm0
## when encrypting, outputs out(%xmm0) ^ 63
## when decrypting, outputs unskew(%xmm0)
##
## Always called right before return... jumps to cleanup and exits
##
&set_label("schedule_mangle_last",16);
# schedule last round key from xmm0
&lea ($base,&DWP($k_deskew,$const));
&test ($out,$out);
&jnz (&label("schedule_mangle_last_dec"));
# encrypting
&movdqa ("xmm1",&QWP($k_sr,$const,$magic));
&pshufb ("xmm0","xmm1"); # output permute
&lea ($base,&DWP($k_opt,$const)); # prepare to output transform
&add ($key,32);
&set_label("schedule_mangle_last_dec");
&add ($key,-16);
&pxor ("xmm0",&QWP($k_s63,$const));
&call ("_vpaes_schedule_transform"); # output transform
&movdqu (&QWP(0,$key),"xmm0"); # save last key
# cleanup
&pxor ("xmm0","xmm0");
&pxor ("xmm1","xmm1");
&pxor ("xmm2","xmm2");
&pxor ("xmm3","xmm3");
&pxor ("xmm4","xmm4");
&pxor ("xmm5","xmm5");
&pxor ("xmm6","xmm6");
&pxor ("xmm7","xmm7");
&ret ();
&function_end_B("_vpaes_schedule_core");
##
## .aes_schedule_192_smear
##
## Smear the short, low side in the 192-bit key schedule.
##
## Inputs:
## %xmm7: high side, b a x y
## %xmm6: low side, d c 0 0
## %xmm13: 0
##
## Outputs:
## %xmm6: b+c+d b+c 0 0
## %xmm0: b+c+d b+c b a
##
&function_begin_B("_vpaes_schedule_192_smear");
&pshufd ("xmm1","xmm6",0x80); # d c 0 0 -> c 0 0 0
&pshufd ("xmm0","xmm7",0xFE); # b a _ _ -> b b b a
&pxor ("xmm6","xmm1"); # -> c+d c 0 0
&pxor ("xmm1","xmm1");
&pxor ("xmm6","xmm0"); # -> b+c+d b+c b a
&movdqa ("xmm0","xmm6");
&movhlps("xmm6","xmm1"); # clobber low side with zeros
&ret ();
&function_end_B("_vpaes_schedule_192_smear");
##
## .aes_schedule_round
##
## Runs one main round of the key schedule on %xmm0, %xmm7
##
## Specifically, runs subbytes on the high dword of %xmm0
## then rotates it by one byte and xors into the low dword of
## %xmm7.
##
## Adds rcon from low byte of %xmm8, then rotates %xmm8 for
## next rcon.
##
## Smears the dwords of %xmm7 by xoring the low into the
## second low, result into third, result into highest.
##
## Returns results in %xmm7 = %xmm0.
## Clobbers %xmm1-%xmm5.
##
&function_begin_B("_vpaes_schedule_round");
# extract rcon from xmm8
&movdqa ("xmm2",&QWP(8,"esp")); # xmm8
&pxor ("xmm1","xmm1");
&palignr("xmm1","xmm2",15);
&palignr("xmm2","xmm2",15);
&pxor ("xmm7","xmm1");
# rotate
&pshufd ("xmm0","xmm0",0xFF);
&palignr("xmm0","xmm0",1);
# fall through...
&movdqa (&QWP(8,"esp"),"xmm2"); # xmm8
# low round: same as high round, but no rotation and no rcon.
&set_label("_vpaes_schedule_low_round");
# smear xmm7
&movdqa ("xmm1","xmm7");
&pslldq ("xmm7",4);
&pxor ("xmm7","xmm1");
&movdqa ("xmm1","xmm7");
&pslldq ("xmm7",8);
&pxor ("xmm7","xmm1");
&pxor ("xmm7",&QWP($k_s63,$const));
# subbyte
&movdqa ("xmm4",&QWP($k_s0F,$const));
&movdqa ("xmm5",&QWP($k_inv,$const)); # 4 : 1/j
&movdqa ("xmm1","xmm4");
&pandn ("xmm1","xmm0");
&psrld ("xmm1",4); # 1 = i
&pand ("xmm0","xmm4"); # 0 = k
&movdqa ("xmm2",&QWP($k_inv+16,$const));# 2 : a/k
&pshufb ("xmm2","xmm0"); # 2 = a/k
&pxor ("xmm0","xmm1"); # 0 = j
&movdqa ("xmm3","xmm5"); # 3 : 1/i
&pshufb ("xmm3","xmm1"); # 3 = 1/i
&pxor ("xmm3","xmm2"); # 3 = iak = 1/i + a/k
&movdqa ("xmm4","xmm5"); # 4 : 1/j
&pshufb ("xmm4","xmm0"); # 4 = 1/j
&pxor ("xmm4","xmm2"); # 4 = jak = 1/j + a/k
&movdqa ("xmm2","xmm5"); # 2 : 1/iak
&pshufb ("xmm2","xmm3"); # 2 = 1/iak
&pxor ("xmm2","xmm0"); # 2 = io
&movdqa ("xmm3","xmm5"); # 3 : 1/jak
&pshufb ("xmm3","xmm4"); # 3 = 1/jak
&pxor ("xmm3","xmm1"); # 3 = jo
&movdqa ("xmm4",&QWP($k_sb1,$const)); # 4 : sbou
&pshufb ("xmm4","xmm2"); # 4 = sbou
&movdqa ("xmm0",&QWP($k_sb1+16,$const));# 0 : sbot
&pshufb ("xmm0","xmm3"); # 0 = sb1t
&pxor ("xmm0","xmm4"); # 0 = sbox output
# add in smeared stuff
&pxor ("xmm0","xmm7");
&movdqa ("xmm7","xmm0");
&ret ();
&function_end_B("_vpaes_schedule_round");
##
## .aes_schedule_transform
##
## Linear-transform %xmm0 according to tables at (%ebx)
##
## Output in %xmm0
## Clobbers %xmm1, %xmm2
##
&function_begin_B("_vpaes_schedule_transform");
&movdqa ("xmm2",&QWP($k_s0F,$const));
&movdqa ("xmm1","xmm2");
&pandn ("xmm1","xmm0");
&psrld ("xmm1",4);
&pand ("xmm0","xmm2");
&movdqa ("xmm2",&QWP(0,$base));
&pshufb ("xmm2","xmm0");
&movdqa ("xmm0",&QWP(16,$base));
&pshufb ("xmm0","xmm1");
&pxor ("xmm0","xmm2");
&ret ();
&function_end_B("_vpaes_schedule_transform");
##
## .aes_schedule_mangle
##
## Mangle xmm0 from (basis-transformed) standard version
## to our version.
##
## On encrypt,
## xor with 0x63
## multiply by circulant 0,1,1,1
## apply shiftrows transform
##
## On decrypt,
## xor with 0x63
## multiply by "inverse mixcolumns" circulant E,B,D,9
## deskew
## apply shiftrows transform
##
##
## Writes out to (%edx), and increments or decrements it
## Keeps track of round number mod 4 in %ecx
## Preserves xmm0
## Clobbers xmm1-xmm5
##
&function_begin_B("_vpaes_schedule_mangle");
&movdqa ("xmm4","xmm0"); # save xmm0 for later
&movdqa ("xmm5",&QWP($k_mc_forward,$const));
&test ($out,$out);
&jnz (&label("schedule_mangle_dec"));
# encrypting
&add ($key,16);
&pxor ("xmm4",&QWP($k_s63,$const));
&pshufb ("xmm4","xmm5");
&movdqa ("xmm3","xmm4");
&pshufb ("xmm4","xmm5");
&pxor ("xmm3","xmm4");
&pshufb ("xmm4","xmm5");
&pxor ("xmm3","xmm4");
&jmp (&label("schedule_mangle_both"));
&set_label("schedule_mangle_dec",16);
# inverse mix columns
&movdqa ("xmm2",&QWP($k_s0F,$const));
&lea ($inp,&DWP($k_dksd,$const));
&movdqa ("xmm1","xmm2");
&pandn ("xmm1","xmm4");
&psrld ("xmm1",4); # 1 = hi
&pand ("xmm4","xmm2"); # 4 = lo
&movdqa ("xmm2",&QWP(0,$inp));
&pshufb ("xmm2","xmm4");
&movdqa ("xmm3",&QWP(0x10,$inp));
&pshufb ("xmm3","xmm1");
&pxor ("xmm3","xmm2");
&pshufb ("xmm3","xmm5");
&movdqa ("xmm2",&QWP(0x20,$inp));
&pshufb ("xmm2","xmm4");
&pxor ("xmm2","xmm3");
&movdqa ("xmm3",&QWP(0x30,$inp));
&pshufb ("xmm3","xmm1");
&pxor ("xmm3","xmm2");
&pshufb ("xmm3","xmm5");
&movdqa ("xmm2",&QWP(0x40,$inp));
&pshufb ("xmm2","xmm4");
&pxor ("xmm2","xmm3");
&movdqa ("xmm3",&QWP(0x50,$inp));
&pshufb ("xmm3","xmm1");
&pxor ("xmm3","xmm2");
&pshufb ("xmm3","xmm5");
&movdqa ("xmm2",&QWP(0x60,$inp));
&pshufb ("xmm2","xmm4");
&pxor ("xmm2","xmm3");
&movdqa ("xmm3",&QWP(0x70,$inp));
&pshufb ("xmm3","xmm1");
&pxor ("xmm3","xmm2");
&add ($key,-16);
&set_label("schedule_mangle_both");
&movdqa ("xmm1",&QWP($k_sr,$const,$magic));
&pshufb ("xmm3","xmm1");
&add ($magic,-16);
&and ($magic,0x30);
&movdqu (&QWP(0,$key),"xmm3");
&ret ();
&function_end_B("_vpaes_schedule_mangle");
#
# Interface to OpenSSL
#
&function_begin("${PREFIX}_set_encrypt_key");
record_function_hit(5);
&mov ($inp,&wparam(0)); # inp
&lea ($base,&DWP(-56,"esp"));
&mov ($round,&wparam(1)); # bits
&and ($base,-16);
&mov ($key,&wparam(2)); # key
&xchg ($base,"esp"); # alloca
&mov (&DWP(48,"esp"),$base);
&mov ($base,$round);
&shr ($base,5);
&add ($base,5);
&mov (&DWP(240,$key),$base); # AES_KEY->rounds = nbits/32+5;
&mov ($magic,0x30);
&mov ($out,0);
&lea ($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
&call ("_vpaes_schedule_core");
&set_label("pic_point");
&mov ("esp",&DWP(48,"esp"));
&xor ("eax","eax");
&function_end("${PREFIX}_set_encrypt_key");
&function_begin("${PREFIX}_set_decrypt_key");
&mov ($inp,&wparam(0)); # inp
&lea ($base,&DWP(-56,"esp"));
&mov ($round,&wparam(1)); # bits
&and ($base,-16);
&mov ($key,&wparam(2)); # key
&xchg ($base,"esp"); # alloca
&mov (&DWP(48,"esp"),$base);
&mov ($base,$round);
&shr ($base,5);
&add ($base,5);
&mov (&DWP(240,$key),$base); # AES_KEY->rounds = nbits/32+5;
&shl ($base,4);
&lea ($key,&DWP(16,$key,$base));
&mov ($out,1);
&mov ($magic,$round);
&shr ($magic,1);
&and ($magic,32);
&xor ($magic,32); # nbist==192?0:32;
&lea ($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
&call ("_vpaes_schedule_core");
&set_label("pic_point");
&mov ("esp",&DWP(48,"esp"));
&xor ("eax","eax");
&function_end("${PREFIX}_set_decrypt_key");
&function_begin("${PREFIX}_encrypt");
record_function_hit(4);
&lea ($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
&call ("_vpaes_preheat");
&set_label("pic_point");
&mov ($inp,&wparam(0)); # inp
&lea ($base,&DWP(-56,"esp"));
&mov ($out,&wparam(1)); # out
&and ($base,-16);
&mov ($key,&wparam(2)); # key
&xchg ($base,"esp"); # alloca
&mov (&DWP(48,"esp"),$base);
&movdqu ("xmm0",&QWP(0,$inp));
&call ("_vpaes_encrypt_core");
&movdqu (&QWP(0,$out),"xmm0");
&mov ("esp",&DWP(48,"esp"));
&function_end("${PREFIX}_encrypt");
&function_begin("${PREFIX}_decrypt");
&lea ($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
&call ("_vpaes_preheat");
&set_label("pic_point");
&mov ($inp,&wparam(0)); # inp
&lea ($base,&DWP(-56,"esp"));
&mov ($out,&wparam(1)); # out
&and ($base,-16);
&mov ($key,&wparam(2)); # key
&xchg ($base,"esp"); # alloca
&mov (&DWP(48,"esp"),$base);
&movdqu ("xmm0",&QWP(0,$inp));
&call ("_vpaes_decrypt_core");
&movdqu (&QWP(0,$out),"xmm0");
&mov ("esp",&DWP(48,"esp"));
&function_end("${PREFIX}_decrypt");
&function_begin("${PREFIX}_cbc_encrypt");
&mov ($inp,&wparam(0)); # inp
&mov ($out,&wparam(1)); # out
&mov ($round,&wparam(2)); # len
&mov ($key,&wparam(3)); # key
&sub ($round,16);
&jc (&label("cbc_abort"));
&lea ($base,&DWP(-56,"esp"));
&mov ($const,&wparam(4)); # ivp
&and ($base,-16);
&mov ($magic,&wparam(5)); # enc
&xchg ($base,"esp"); # alloca
&movdqu ("xmm1",&QWP(0,$const)); # load IV
&sub ($out,$inp);
&mov (&DWP(48,"esp"),$base);
&mov (&DWP(0,"esp"),$out); # save out
&mov (&DWP(4,"esp"),$key) # save key
&mov (&DWP(8,"esp"),$const); # save ivp
&mov ($out,$round); # $out works as $len
&lea ($const,&DWP(&label("_vpaes_consts")."+0x30-".&label("pic_point")));
&call ("_vpaes_preheat");
&set_label("pic_point");
&cmp ($magic,0);
&je (&label("cbc_dec_loop"));
&jmp (&label("cbc_enc_loop"));
&set_label("cbc_enc_loop",16);
&movdqu ("xmm0",&QWP(0,$inp)); # load input
&pxor ("xmm0","xmm1"); # inp^=iv
&call ("_vpaes_encrypt_core");
&mov ($base,&DWP(0,"esp")); # restore out
&mov ($key,&DWP(4,"esp")); # restore key
&movdqa ("xmm1","xmm0");
&movdqu (&QWP(0,$base,$inp),"xmm0"); # write output
&lea ($inp,&DWP(16,$inp));
&sub ($out,16);
&jnc (&label("cbc_enc_loop"));
&jmp (&label("cbc_done"));
&set_label("cbc_dec_loop",16);
&movdqu ("xmm0",&QWP(0,$inp)); # load input
&movdqa (&QWP(16,"esp"),"xmm1"); # save IV
&movdqa (&QWP(32,"esp"),"xmm0"); # save future IV
&call ("_vpaes_decrypt_core");
&mov ($base,&DWP(0,"esp")); # restore out
&mov ($key,&DWP(4,"esp")); # restore key
&pxor ("xmm0",&QWP(16,"esp")); # out^=iv
&movdqa ("xmm1",&QWP(32,"esp")); # load next IV
&movdqu (&QWP(0,$base,$inp),"xmm0"); # write output
&lea ($inp,&DWP(16,$inp));
&sub ($out,16);
&jnc (&label("cbc_dec_loop"));
&set_label("cbc_done");
&mov ($base,&DWP(8,"esp")); # restore ivp
&mov ("esp",&DWP(48,"esp"));
&movdqu (&QWP(0,$base),"xmm1"); # write IV
&set_label("cbc_abort");
&function_end("${PREFIX}_cbc_encrypt");
&asm_finish();
close STDOUT or die "error closing STDOUT: $!";