ref: 127dfcfefaec2397cb462ef797befd0b3611864e
dir: /third_party/boringssl/src/include/openssl/ec.h/
/* Originally written by Bodo Moeller for the OpenSSL project.
* ====================================================================
* Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* openssl-core@openssl.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.openssl.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
*
* Portions of the attached software ("Contribution") are developed by
* SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
*
* The Contribution is licensed pursuant to the OpenSSL open source
* license provided above.
*
* The elliptic curve binary polynomial software is originally written by
* Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
* Laboratories. */
#ifndef OPENSSL_HEADER_EC_H
#define OPENSSL_HEADER_EC_H
#include <openssl/base.h>
#if defined(__cplusplus)
extern "C" {
#endif
// Low-level operations on elliptic curves.
// point_conversion_form_t enumerates forms, as defined in X9.62 (ECDSA), for
// the encoding of a elliptic curve point (x,y)
typedef enum {
// POINT_CONVERSION_COMPRESSED indicates that the point is encoded as z||x,
// where the octet z specifies which solution of the quadratic equation y
// is.
POINT_CONVERSION_COMPRESSED = 2,
// POINT_CONVERSION_UNCOMPRESSED indicates that the point is encoded as
// z||x||y, where z is the octet 0x04.
POINT_CONVERSION_UNCOMPRESSED = 4,
// POINT_CONVERSION_HYBRID indicates that the point is encoded as z||x||y,
// where z specifies which solution of the quadratic equation y is. This is
// not supported by the code and has never been observed in use.
//
// TODO(agl): remove once node.js no longer references this.
POINT_CONVERSION_HYBRID = 6,
} point_conversion_form_t;
// Elliptic curve groups.
// EC_GROUP_new_by_curve_name returns a fresh EC_GROUP object for the elliptic
// curve specified by |nid|, or NULL on unsupported NID or allocation failure.
//
// The supported NIDs are:
// NID_secp224r1 (P-224),
// NID_X9_62_prime256v1 (P-256),
// NID_secp384r1 (P-384),
// NID_secp521r1 (P-521)
//
// If in doubt, use |NID_X9_62_prime256v1|, or see the curve25519.h header for
// more modern primitives.
OPENSSL_EXPORT EC_GROUP *EC_GROUP_new_by_curve_name(int nid);
// EC_GROUP_free releases a reference to |group|.
OPENSSL_EXPORT void EC_GROUP_free(EC_GROUP *group);
// EC_GROUP_dup takes a reference to |a| and returns it.
OPENSSL_EXPORT EC_GROUP *EC_GROUP_dup(const EC_GROUP *a);
// EC_GROUP_cmp returns zero if |a| and |b| are the same group and non-zero
// otherwise.
OPENSSL_EXPORT int EC_GROUP_cmp(const EC_GROUP *a, const EC_GROUP *b,
BN_CTX *ignored);
// EC_GROUP_get0_generator returns a pointer to the internal |EC_POINT| object
// in |group| that specifies the generator for the group.
OPENSSL_EXPORT const EC_POINT *EC_GROUP_get0_generator(const EC_GROUP *group);
// EC_GROUP_get0_order returns a pointer to the internal |BIGNUM| object in
// |group| that specifies the order of the group.
OPENSSL_EXPORT const BIGNUM *EC_GROUP_get0_order(const EC_GROUP *group);
// EC_GROUP_order_bits returns the number of bits of the order of |group|.
OPENSSL_EXPORT int EC_GROUP_order_bits(const EC_GROUP *group);
// EC_GROUP_get_cofactor sets |*cofactor| to the cofactor of |group| using
// |ctx|, if it's not NULL. It returns one on success and zero otherwise.
OPENSSL_EXPORT int EC_GROUP_get_cofactor(const EC_GROUP *group,
BIGNUM *cofactor, BN_CTX *ctx);
// EC_GROUP_get_curve_GFp gets various parameters about a group. It sets
// |*out_p| to the order of the coordinate field and |*out_a| and |*out_b| to
// the parameters of the curve when expressed as y² = x³ + ax + b. Any of the
// output parameters can be NULL. It returns one on success and zero on
// error.
OPENSSL_EXPORT int EC_GROUP_get_curve_GFp(const EC_GROUP *group, BIGNUM *out_p,
BIGNUM *out_a, BIGNUM *out_b,
BN_CTX *ctx);
// EC_GROUP_get_curve_name returns a NID that identifies |group|.
OPENSSL_EXPORT int EC_GROUP_get_curve_name(const EC_GROUP *group);
// EC_GROUP_get_degree returns the number of bits needed to represent an
// element of the field underlying |group|.
OPENSSL_EXPORT unsigned EC_GROUP_get_degree(const EC_GROUP *group);
// EC_curve_nid2nist returns the NIST name of the elliptic curve specified by
// |nid|, or NULL if |nid| is not a NIST curve. For example, it returns "P-256"
// for |NID_X9_62_prime256v1|.
OPENSSL_EXPORT const char *EC_curve_nid2nist(int nid);
// EC_curve_nist2nid returns the NID of the elliptic curve specified by the NIST
// name |name|, or |NID_undef| if |name| is not a recognized name. For example,
// it returns |NID_X9_62_prime256v1| for "P-256".
OPENSSL_EXPORT int EC_curve_nist2nid(const char *name);
// Points on elliptic curves.
// EC_POINT_new returns a fresh |EC_POINT| object in the given group, or NULL
// on error.
OPENSSL_EXPORT EC_POINT *EC_POINT_new(const EC_GROUP *group);
// EC_POINT_free frees |point| and the data that it points to.
OPENSSL_EXPORT void EC_POINT_free(EC_POINT *point);
// EC_POINT_copy sets |*dest| equal to |*src|. It returns one on success and
// zero otherwise.
OPENSSL_EXPORT int EC_POINT_copy(EC_POINT *dest, const EC_POINT *src);
// EC_POINT_dup returns a fresh |EC_POINT| that contains the same values as
// |src|, or NULL on error.
OPENSSL_EXPORT EC_POINT *EC_POINT_dup(const EC_POINT *src,
const EC_GROUP *group);
// EC_POINT_set_to_infinity sets |point| to be the "point at infinity" for the
// given group.
OPENSSL_EXPORT int EC_POINT_set_to_infinity(const EC_GROUP *group,
EC_POINT *point);
// EC_POINT_is_at_infinity returns one iff |point| is the point at infinity and
// zero otherwise.
OPENSSL_EXPORT int EC_POINT_is_at_infinity(const EC_GROUP *group,
const EC_POINT *point);
// EC_POINT_is_on_curve returns one if |point| is an element of |group| and
// and zero otherwise or when an error occurs. This is different from OpenSSL,
// which returns -1 on error. If |ctx| is non-NULL, it may be used.
OPENSSL_EXPORT int EC_POINT_is_on_curve(const EC_GROUP *group,
const EC_POINT *point, BN_CTX *ctx);
// EC_POINT_cmp returns zero if |a| is equal to |b|, greater than zero if
// not equal and -1 on error. If |ctx| is not NULL, it may be used.
OPENSSL_EXPORT int EC_POINT_cmp(const EC_GROUP *group, const EC_POINT *a,
const EC_POINT *b, BN_CTX *ctx);
// Point conversion.
// EC_POINT_get_affine_coordinates_GFp sets |x| and |y| to the affine value of
// |point| using |ctx|, if it's not NULL. It returns one on success and zero
// otherwise.
//
// Either |x| or |y| may be NULL to skip computing that coordinate. This is
// slightly faster in the common case where only the x-coordinate is needed.
OPENSSL_EXPORT int EC_POINT_get_affine_coordinates_GFp(const EC_GROUP *group,
const EC_POINT *point,
BIGNUM *x, BIGNUM *y,
BN_CTX *ctx);
// EC_POINT_get_affine_coordinates is an alias of
// |EC_POINT_get_affine_coordinates_GFp|.
OPENSSL_EXPORT int EC_POINT_get_affine_coordinates(const EC_GROUP *group,
const EC_POINT *point,
BIGNUM *x, BIGNUM *y,
BN_CTX *ctx);
// EC_POINT_set_affine_coordinates_GFp sets the value of |point| to be
// (|x|, |y|). The |ctx| argument may be used if not NULL. It returns one
// on success or zero on error. It's considered an error if the point is not on
// the curve.
//
// Note that the corresponding function in OpenSSL versions prior to 1.0.2s does
// not check if the point is on the curve. This is a security-critical check, so
// code additionally supporting OpenSSL should repeat the check with
// |EC_POINT_is_on_curve| or check for older OpenSSL versions with
// |OPENSSL_VERSION_NUMBER|.
OPENSSL_EXPORT int EC_POINT_set_affine_coordinates_GFp(const EC_GROUP *group,
EC_POINT *point,
const BIGNUM *x,
const BIGNUM *y,
BN_CTX *ctx);
// EC_POINT_set_affine_coordinates is an alias of
// |EC_POINT_set_affine_coordinates_GFp|.
OPENSSL_EXPORT int EC_POINT_set_affine_coordinates(const EC_GROUP *group,
EC_POINT *point,
const BIGNUM *x,
const BIGNUM *y,
BN_CTX *ctx);
// EC_POINT_point2oct serialises |point| into the X9.62 form given by |form|
// into, at most, |len| bytes at |buf|. It returns the number of bytes written
// or zero on error if |buf| is non-NULL, else the number of bytes needed. The
// |ctx| argument may be used if not NULL.
OPENSSL_EXPORT size_t EC_POINT_point2oct(const EC_GROUP *group,
const EC_POINT *point,
point_conversion_form_t form,
uint8_t *buf, size_t len, BN_CTX *ctx);
// EC_POINT_point2cbb behaves like |EC_POINT_point2oct| but appends the
// serialised point to |cbb|. It returns one on success and zero on error.
OPENSSL_EXPORT int EC_POINT_point2cbb(CBB *out, const EC_GROUP *group,
const EC_POINT *point,
point_conversion_form_t form,
BN_CTX *ctx);
// EC_POINT_oct2point sets |point| from |len| bytes of X9.62 format
// serialisation in |buf|. It returns one on success and zero on error. The
// |ctx| argument may be used if not NULL. It's considered an error if |buf|
// does not represent a point on the curve.
OPENSSL_EXPORT int EC_POINT_oct2point(const EC_GROUP *group, EC_POINT *point,
const uint8_t *buf, size_t len,
BN_CTX *ctx);
// EC_POINT_set_compressed_coordinates_GFp sets |point| to equal the point with
// the given |x| coordinate and the y coordinate specified by |y_bit| (see
// X9.62). It returns one on success and zero otherwise.
OPENSSL_EXPORT int EC_POINT_set_compressed_coordinates_GFp(
const EC_GROUP *group, EC_POINT *point, const BIGNUM *x, int y_bit,
BN_CTX *ctx);
// Group operations.
// EC_POINT_add sets |r| equal to |a| plus |b|. It returns one on success and
// zero otherwise. If |ctx| is not NULL, it may be used.
OPENSSL_EXPORT int EC_POINT_add(const EC_GROUP *group, EC_POINT *r,
const EC_POINT *a, const EC_POINT *b,
BN_CTX *ctx);
// EC_POINT_dbl sets |r| equal to |a| plus |a|. It returns one on success and
// zero otherwise. If |ctx| is not NULL, it may be used.
OPENSSL_EXPORT int EC_POINT_dbl(const EC_GROUP *group, EC_POINT *r,
const EC_POINT *a, BN_CTX *ctx);
// EC_POINT_invert sets |a| equal to minus |a|. It returns one on success and
// zero otherwise. If |ctx| is not NULL, it may be used.
OPENSSL_EXPORT int EC_POINT_invert(const EC_GROUP *group, EC_POINT *a,
BN_CTX *ctx);
// EC_POINT_mul sets r = generator*n + q*m. It returns one on success and zero
// otherwise. If |ctx| is not NULL, it may be used.
OPENSSL_EXPORT int EC_POINT_mul(const EC_GROUP *group, EC_POINT *r,
const BIGNUM *n, const EC_POINT *q,
const BIGNUM *m, BN_CTX *ctx);
// Deprecated functions.
// EC_GROUP_new_curve_GFp creates a new, arbitrary elliptic curve group based
// on the equation y² = x³ + a·x + b. It returns the new group or NULL on
// error.
//
// This new group has no generator. It is an error to use a generator-less group
// with any functions except for |EC_GROUP_free|, |EC_POINT_new|,
// |EC_POINT_set_affine_coordinates_GFp|, and |EC_GROUP_set_generator|.
//
// |EC_GROUP|s returned by this function will always compare as unequal via
// |EC_GROUP_cmp| (even to themselves). |EC_GROUP_get_curve_name| will always
// return |NID_undef|.
//
// Avoid using arbitrary curves and use |EC_GROUP_new_by_curve_name| instead.
OPENSSL_EXPORT EC_GROUP *EC_GROUP_new_curve_GFp(const BIGNUM *p,
const BIGNUM *a,
const BIGNUM *b, BN_CTX *ctx);
// EC_GROUP_set_generator sets the generator for |group| to |generator|, which
// must have the given order and cofactor. It may only be used with |EC_GROUP|
// objects returned by |EC_GROUP_new_curve_GFp| and may only be used once on
// each group. |generator| must have been created using |group|.
OPENSSL_EXPORT int EC_GROUP_set_generator(EC_GROUP *group,
const EC_POINT *generator,
const BIGNUM *order,
const BIGNUM *cofactor);
// EC_GROUP_get_order sets |*order| to the order of |group|, if it's not
// NULL. It returns one on success and zero otherwise. |ctx| is ignored. Use
// |EC_GROUP_get0_order| instead.
OPENSSL_EXPORT int EC_GROUP_get_order(const EC_GROUP *group, BIGNUM *order,
BN_CTX *ctx);
#define OPENSSL_EC_EXPLICIT_CURVE 0
#define OPENSSL_EC_NAMED_CURVE 1
// EC_GROUP_set_asn1_flag does nothing.
OPENSSL_EXPORT void EC_GROUP_set_asn1_flag(EC_GROUP *group, int flag);
// EC_GROUP_get_asn1_flag returns |OPENSSL_EC_NAMED_CURVE|.
OPENSSL_EXPORT int EC_GROUP_get_asn1_flag(const EC_GROUP *group);
typedef struct ec_method_st EC_METHOD;
// EC_GROUP_method_of returns a dummy non-NULL pointer.
OPENSSL_EXPORT const EC_METHOD *EC_GROUP_method_of(const EC_GROUP *group);
// EC_METHOD_get_field_type returns NID_X9_62_prime_field.
OPENSSL_EXPORT int EC_METHOD_get_field_type(const EC_METHOD *meth);
// EC_GROUP_set_point_conversion_form aborts the process if |form| is not
// |POINT_CONVERSION_UNCOMPRESSED| and otherwise does nothing.
OPENSSL_EXPORT void EC_GROUP_set_point_conversion_form(
EC_GROUP *group, point_conversion_form_t form);
// EC_builtin_curve describes a supported elliptic curve.
typedef struct {
int nid;
const char *comment;
} EC_builtin_curve;
// EC_get_builtin_curves writes at most |max_num_curves| elements to
// |out_curves| and returns the total number that it would have written, had
// |max_num_curves| been large enough.
//
// The |EC_builtin_curve| items describe the supported elliptic curves.
OPENSSL_EXPORT size_t EC_get_builtin_curves(EC_builtin_curve *out_curves,
size_t max_num_curves);
// EC_POINT_clear_free calls |EC_POINT_free|.
OPENSSL_EXPORT void EC_POINT_clear_free(EC_POINT *point);
#if defined(__cplusplus)
} // extern C
#endif
// Old code expects to get EC_KEY from ec.h.
#include <openssl/ec_key.h>
#if defined(__cplusplus)
extern "C++" {
BSSL_NAMESPACE_BEGIN
BORINGSSL_MAKE_DELETER(EC_POINT, EC_POINT_free)
BORINGSSL_MAKE_DELETER(EC_GROUP, EC_GROUP_free)
BSSL_NAMESPACE_END
} // extern C++
#endif
#define EC_R_BUFFER_TOO_SMALL 100
#define EC_R_COORDINATES_OUT_OF_RANGE 101
#define EC_R_D2I_ECPKPARAMETERS_FAILURE 102
#define EC_R_EC_GROUP_NEW_BY_NAME_FAILURE 103
#define EC_R_GROUP2PKPARAMETERS_FAILURE 104
#define EC_R_I2D_ECPKPARAMETERS_FAILURE 105
#define EC_R_INCOMPATIBLE_OBJECTS 106
#define EC_R_INVALID_COMPRESSED_POINT 107
#define EC_R_INVALID_COMPRESSION_BIT 108
#define EC_R_INVALID_ENCODING 109
#define EC_R_INVALID_FIELD 110
#define EC_R_INVALID_FORM 111
#define EC_R_INVALID_GROUP_ORDER 112
#define EC_R_INVALID_PRIVATE_KEY 113
#define EC_R_MISSING_PARAMETERS 114
#define EC_R_MISSING_PRIVATE_KEY 115
#define EC_R_NON_NAMED_CURVE 116
#define EC_R_NOT_INITIALIZED 117
#define EC_R_PKPARAMETERS2GROUP_FAILURE 118
#define EC_R_POINT_AT_INFINITY 119
#define EC_R_POINT_IS_NOT_ON_CURVE 120
#define EC_R_SLOT_FULL 121
#define EC_R_UNDEFINED_GENERATOR 122
#define EC_R_UNKNOWN_GROUP 123
#define EC_R_UNKNOWN_ORDER 124
#define EC_R_WRONG_ORDER 125
#define EC_R_BIGNUM_OUT_OF_RANGE 126
#define EC_R_WRONG_CURVE_PARAMETERS 127
#define EC_R_DECODE_ERROR 128
#define EC_R_ENCODE_ERROR 129
#define EC_R_GROUP_MISMATCH 130
#define EC_R_INVALID_COFACTOR 131
#define EC_R_PUBLIC_KEY_VALIDATION_FAILED 132
#define EC_R_INVALID_SCALAR 133
#endif // OPENSSL_HEADER_EC_H