ref: 6c5522c6f843532e7a1e86f79856d703349f5e94
dir: /src/truetype/ttinterp.c/
/****************************************************************************
*
* ttinterp.c
*
* TrueType bytecode interpreter (body).
*
* Copyright (C) 1996-2022 by
* David Turner, Robert Wilhelm, and Werner Lemberg.
*
* This file is part of the FreeType project, and may only be used,
* modified, and distributed under the terms of the FreeType project
* license, LICENSE.TXT. By continuing to use, modify, or distribute
* this file you indicate that you have read the license and
* understand and accept it fully.
*
*/
/* Greg Hitchcock from Microsoft has helped a lot in resolving unclear */
/* issues; many thanks! */
#include <freetype/internal/ftdebug.h>
#include <freetype/internal/ftcalc.h>
#include <freetype/fttrigon.h>
#include <freetype/ftsystem.h>
#include <freetype/ftdriver.h>
#include <freetype/ftmm.h>
#include "ttinterp.h"
#include "tterrors.h"
#include "ttsubpix.h"
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
#include "ttgxvar.h"
#endif
#ifdef TT_USE_BYTECODE_INTERPRETER
/**************************************************************************
*
* The macro FT_COMPONENT is used in trace mode. It is an implicit
* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log
* messages during execution.
*/
#undef FT_COMPONENT
#define FT_COMPONENT ttinterp
#define NO_SUBPIXEL_HINTING \
( ((TT_Driver)FT_FACE_DRIVER( exc->face ))->interpreter_version == \
TT_INTERPRETER_VERSION_35 )
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
#define SUBPIXEL_HINTING_INFINALITY \
( ((TT_Driver)FT_FACE_DRIVER( exc->face ))->interpreter_version == \
TT_INTERPRETER_VERSION_38 )
#endif
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
#define SUBPIXEL_HINTING_MINIMAL \
( ((TT_Driver)FT_FACE_DRIVER( exc->face ))->interpreter_version == \
TT_INTERPRETER_VERSION_40 )
#endif
#define PROJECT( v1, v2 ) \
exc->func_project( exc, \
SUB_LONG( (v1)->x, (v2)->x ), \
SUB_LONG( (v1)->y, (v2)->y ) )
#define DUALPROJ( v1, v2 ) \
exc->func_dualproj( exc, \
SUB_LONG( (v1)->x, (v2)->x ), \
SUB_LONG( (v1)->y, (v2)->y ) )
#define FAST_PROJECT( v ) \
exc->func_project( exc, (v)->x, (v)->y )
#define FAST_DUALPROJ( v ) \
exc->func_dualproj( exc, (v)->x, (v)->y )
/**************************************************************************
*
* Two simple bounds-checking macros.
*/
#define BOUNDS( x, n ) ( (FT_UInt)(x) >= (FT_UInt)(n) )
#define BOUNDSL( x, n ) ( (FT_ULong)(x) >= (FT_ULong)(n) )
#undef SUCCESS
#define SUCCESS 0
#undef FAILURE
#define FAILURE 1
/**************************************************************************
*
* CODERANGE FUNCTIONS
*
*/
/**************************************************************************
*
* @Function:
* TT_Goto_CodeRange
*
* @Description:
* Switches to a new code range (updates the code related elements in
* `exec', and `IP').
*
* @Input:
* range ::
* The new execution code range.
*
* IP ::
* The new IP in the new code range.
*
* @InOut:
* exec ::
* The target execution context.
*/
FT_LOCAL_DEF( void )
TT_Goto_CodeRange( TT_ExecContext exec,
FT_Int range,
FT_Long IP )
{
TT_CodeRange* coderange;
FT_ASSERT( range >= 1 && range <= 3 );
coderange = &exec->codeRangeTable[range - 1];
FT_ASSERT( coderange->base );
/* NOTE: Because the last instruction of a program may be a CALL */
/* which will return to the first byte *after* the code */
/* range, we test for IP <= Size instead of IP < Size. */
/* */
FT_ASSERT( IP <= coderange->size );
exec->code = coderange->base;
exec->codeSize = coderange->size;
exec->IP = IP;
exec->curRange = range;
}
/**************************************************************************
*
* @Function:
* TT_Set_CodeRange
*
* @Description:
* Sets a code range.
*
* @Input:
* range ::
* The code range index.
*
* base ::
* The new code base.
*
* length ::
* The range size in bytes.
*
* @InOut:
* exec ::
* The target execution context.
*/
FT_LOCAL_DEF( void )
TT_Set_CodeRange( TT_ExecContext exec,
FT_Int range,
void* base,
FT_Long length )
{
FT_ASSERT( range >= 1 && range <= 3 );
exec->codeRangeTable[range - 1].base = (FT_Byte*)base;
exec->codeRangeTable[range - 1].size = length;
}
/**************************************************************************
*
* @Function:
* TT_Clear_CodeRange
*
* @Description:
* Clears a code range.
*
* @Input:
* range ::
* The code range index.
*
* @InOut:
* exec ::
* The target execution context.
*/
FT_LOCAL_DEF( void )
TT_Clear_CodeRange( TT_ExecContext exec,
FT_Int range )
{
FT_ASSERT( range >= 1 && range <= 3 );
exec->codeRangeTable[range - 1].base = NULL;
exec->codeRangeTable[range - 1].size = 0;
}
/**************************************************************************
*
* EXECUTION CONTEXT ROUTINES
*
*/
/**************************************************************************
*
* @Function:
* TT_Done_Context
*
* @Description:
* Destroys a given context.
*
* @Input:
* exec ::
* A handle to the target execution context.
*
* memory ::
* A handle to the parent memory object.
*
* @Note:
* Only the glyph loader and debugger should call this function.
*/
FT_LOCAL_DEF( void )
TT_Done_Context( TT_ExecContext exec )
{
FT_Memory memory = exec->memory;
/* points zone */
exec->maxPoints = 0;
exec->maxContours = 0;
/* free stack */
FT_FREE( exec->stack );
exec->stackSize = 0;
/* free glyf cvt working area */
FT_FREE( exec->glyfCvt );
exec->glyfCvtSize = 0;
/* free glyf storage working area */
FT_FREE( exec->glyfStorage );
exec->glyfStoreSize = 0;
/* free call stack */
FT_FREE( exec->callStack );
exec->callSize = 0;
exec->callTop = 0;
/* free glyph code range */
FT_FREE( exec->glyphIns );
exec->glyphSize = 0;
exec->size = NULL;
exec->face = NULL;
FT_FREE( exec );
}
/**************************************************************************
*
* @Function:
* Update_Max
*
* @Description:
* Checks the size of a buffer and reallocates it if necessary.
*
* @Input:
* memory ::
* A handle to the parent memory object.
*
* multiplier ::
* The size in bytes of each element in the buffer.
*
* new_max ::
* The new capacity (size) of the buffer.
*
* @InOut:
* size ::
* The address of the buffer's current size expressed
* in elements.
*
* buff ::
* The address of the buffer base pointer.
*
* @Return:
* FreeType error code. 0 means success.
*/
FT_LOCAL_DEF( FT_Error )
Update_Max( FT_Memory memory,
FT_ULong* size,
FT_ULong multiplier,
void* _pbuff,
FT_ULong new_max )
{
FT_Error error;
void** pbuff = (void**)_pbuff;
if ( *size < new_max )
{
if ( FT_QREALLOC( *pbuff, *size * multiplier, new_max * multiplier ) )
return error;
*size = new_max;
}
return FT_Err_Ok;
}
/**************************************************************************
*
* @Function:
* TT_Load_Context
*
* @Description:
* Prepare an execution context for glyph hinting.
*
* @Input:
* face ::
* A handle to the source face object.
*
* size ::
* A handle to the source size object.
*
* @InOut:
* exec ::
* A handle to the target execution context.
*
* @Return:
* FreeType error code. 0 means success.
*
* @Note:
* Only the glyph loader and debugger should call this function.
*
* Note that not all members of `TT_ExecContext` get initialized.
*/
FT_LOCAL_DEF( FT_Error )
TT_Load_Context( TT_ExecContext exec,
TT_Face face,
TT_Size size )
{
FT_Int i;
FT_ULong tmp;
TT_MaxProfile* maxp;
FT_Error error;
exec->face = face;
maxp = &face->max_profile;
exec->size = size;
if ( size )
{
exec->numFDefs = size->num_function_defs;
exec->maxFDefs = size->max_function_defs;
exec->numIDefs = size->num_instruction_defs;
exec->maxIDefs = size->max_instruction_defs;
exec->FDefs = size->function_defs;
exec->IDefs = size->instruction_defs;
exec->pointSize = size->point_size;
exec->tt_metrics = size->ttmetrics;
exec->metrics = *size->metrics;
exec->maxFunc = size->max_func;
exec->maxIns = size->max_ins;
for ( i = 0; i < TT_MAX_CODE_RANGES; i++ )
exec->codeRangeTable[i] = size->codeRangeTable[i];
/* set graphics state */
exec->GS = size->GS;
exec->cvtSize = size->cvt_size;
exec->cvt = size->cvt;
exec->storeSize = size->storage_size;
exec->storage = size->storage;
exec->twilight = size->twilight;
/* In case of multi-threading it can happen that the old size object */
/* no longer exists, thus we must clear all glyph zone references. */
FT_ZERO( &exec->zp0 );
exec->zp1 = exec->zp0;
exec->zp2 = exec->zp0;
}
/* XXX: We reserve a little more elements on the stack to deal safely */
/* with broken fonts like arialbs, courbs, timesbs, etc. */
tmp = (FT_ULong)exec->stackSize;
error = Update_Max( exec->memory,
&tmp,
sizeof ( FT_F26Dot6 ),
(void*)&exec->stack,
maxp->maxStackElements + 32 );
exec->stackSize = (FT_Long)tmp;
if ( error )
return error;
tmp = (FT_ULong)exec->glyphSize;
error = Update_Max( exec->memory,
&tmp,
sizeof ( FT_Byte ),
(void*)&exec->glyphIns,
maxp->maxSizeOfInstructions );
exec->glyphSize = (FT_UInt)tmp;
if ( error )
return error;
exec->pts.n_points = 0;
exec->pts.n_contours = 0;
exec->zp1 = exec->pts;
exec->zp2 = exec->pts;
exec->zp0 = exec->pts;
exec->instruction_trap = FALSE;
return FT_Err_Ok;
}
/**************************************************************************
*
* @Function:
* TT_Save_Context
*
* @Description:
* Saves the code ranges in a `size' object.
*
* @Input:
* exec ::
* A handle to the source execution context.
*
* @InOut:
* size ::
* A handle to the target size object.
*
* @Note:
* Only the glyph loader and debugger should call this function.
*/
FT_LOCAL_DEF( void )
TT_Save_Context( TT_ExecContext exec,
TT_Size size )
{
FT_Int i;
/* XXX: Will probably disappear soon with all the code range */
/* management, which is now rather obsolete. */
/* */
size->num_function_defs = exec->numFDefs;
size->num_instruction_defs = exec->numIDefs;
size->max_func = exec->maxFunc;
size->max_ins = exec->maxIns;
for ( i = 0; i < TT_MAX_CODE_RANGES; i++ )
size->codeRangeTable[i] = exec->codeRangeTable[i];
}
/**************************************************************************
*
* @Function:
* TT_Run_Context
*
* @Description:
* Executes one or more instructions in the execution context.
*
* @Input:
* exec ::
* A handle to the target execution context.
*
* @Return:
* TrueType error code. 0 means success.
*/
FT_LOCAL_DEF( FT_Error )
TT_Run_Context( TT_ExecContext exec )
{
TT_Goto_CodeRange( exec, tt_coderange_glyph, 0 );
exec->zp0 = exec->pts;
exec->zp1 = exec->pts;
exec->zp2 = exec->pts;
exec->GS.gep0 = 1;
exec->GS.gep1 = 1;
exec->GS.gep2 = 1;
exec->GS.projVector.x = 0x4000;
exec->GS.projVector.y = 0x0000;
exec->GS.freeVector = exec->GS.projVector;
exec->GS.dualVector = exec->GS.projVector;
exec->GS.round_state = 1;
exec->GS.loop = 1;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
exec->iup_called = FALSE;
#endif
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
exec->iupx_called = FALSE;
exec->iupy_called = FALSE;
#endif
/* some glyphs leave something on the stack. so we clean it */
/* before a new execution. */
exec->top = 0;
exec->callTop = 0;
return exec->face->interpreter( exec );
}
/* The default value for `scan_control' is documented as FALSE in the */
/* TrueType specification. This is confusing since it implies a */
/* Boolean value. However, this is not the case, thus both the */
/* default values of our `scan_type' and `scan_control' fields (which */
/* the documentation's `scan_control' variable is split into) are */
/* zero. */
const TT_GraphicsState tt_default_graphics_state =
{
0, 0, 0,
{ 0x4000, 0 },
{ 0x4000, 0 },
{ 0x4000, 0 },
1, 64, 1,
TRUE, 68, 0, 0, 9, 3,
0, FALSE, 0, 1, 1, 1
};
/* documentation is in ttinterp.h */
FT_EXPORT_DEF( TT_ExecContext )
TT_New_Context( TT_Driver driver )
{
FT_Memory memory;
FT_Error error;
TT_ExecContext exec = NULL;
if ( !driver )
goto Fail;
memory = driver->root.root.memory;
/* allocate object and zero everything inside */
if ( FT_NEW( exec ) )
goto Fail;
/* create callStack here, other allocations delayed */
exec->memory = memory;
exec->callSize = 32;
if ( FT_QNEW_ARRAY( exec->callStack, exec->callSize ) )
FT_FREE( exec );
Fail:
return exec;
}
/**************************************************************************
*
* Before an opcode is executed, the interpreter verifies that there are
* enough arguments on the stack, with the help of the `Pop_Push_Count'
* table.
*
* For each opcode, the first column gives the number of arguments that
* are popped from the stack; the second one gives the number of those
* that are pushed in result.
*
* Opcodes which have a varying number of parameters in the data stream
* (NPUSHB, NPUSHW) are handled specially; they have a negative value in
* the `opcode_length' table, and the value in `Pop_Push_Count' is set
* to zero.
*
*/
#undef PACK
#define PACK( x, y ) ( ( x << 4 ) | y )
static
const FT_Byte Pop_Push_Count[256] =
{
/* opcodes are gathered in groups of 16 */
/* please keep the spaces as they are */
/* 0x00 */
/* SVTCA[0] */ PACK( 0, 0 ),
/* SVTCA[1] */ PACK( 0, 0 ),
/* SPVTCA[0] */ PACK( 0, 0 ),
/* SPVTCA[1] */ PACK( 0, 0 ),
/* SFVTCA[0] */ PACK( 0, 0 ),
/* SFVTCA[1] */ PACK( 0, 0 ),
/* SPVTL[0] */ PACK( 2, 0 ),
/* SPVTL[1] */ PACK( 2, 0 ),
/* SFVTL[0] */ PACK( 2, 0 ),
/* SFVTL[1] */ PACK( 2, 0 ),
/* SPVFS */ PACK( 2, 0 ),
/* SFVFS */ PACK( 2, 0 ),
/* GPV */ PACK( 0, 2 ),
/* GFV */ PACK( 0, 2 ),
/* SFVTPV */ PACK( 0, 0 ),
/* ISECT */ PACK( 5, 0 ),
/* 0x10 */
/* SRP0 */ PACK( 1, 0 ),
/* SRP1 */ PACK( 1, 0 ),
/* SRP2 */ PACK( 1, 0 ),
/* SZP0 */ PACK( 1, 0 ),
/* SZP1 */ PACK( 1, 0 ),
/* SZP2 */ PACK( 1, 0 ),
/* SZPS */ PACK( 1, 0 ),
/* SLOOP */ PACK( 1, 0 ),
/* RTG */ PACK( 0, 0 ),
/* RTHG */ PACK( 0, 0 ),
/* SMD */ PACK( 1, 0 ),
/* ELSE */ PACK( 0, 0 ),
/* JMPR */ PACK( 1, 0 ),
/* SCVTCI */ PACK( 1, 0 ),
/* SSWCI */ PACK( 1, 0 ),
/* SSW */ PACK( 1, 0 ),
/* 0x20 */
/* DUP */ PACK( 1, 2 ),
/* POP */ PACK( 1, 0 ),
/* CLEAR */ PACK( 0, 0 ),
/* SWAP */ PACK( 2, 2 ),
/* DEPTH */ PACK( 0, 1 ),
/* CINDEX */ PACK( 1, 1 ),
/* MINDEX */ PACK( 1, 0 ),
/* ALIGNPTS */ PACK( 2, 0 ),
/* INS_$28 */ PACK( 0, 0 ),
/* UTP */ PACK( 1, 0 ),
/* LOOPCALL */ PACK( 2, 0 ),
/* CALL */ PACK( 1, 0 ),
/* FDEF */ PACK( 1, 0 ),
/* ENDF */ PACK( 0, 0 ),
/* MDAP[0] */ PACK( 1, 0 ),
/* MDAP[1] */ PACK( 1, 0 ),
/* 0x30 */
/* IUP[0] */ PACK( 0, 0 ),
/* IUP[1] */ PACK( 0, 0 ),
/* SHP[0] */ PACK( 0, 0 ), /* loops */
/* SHP[1] */ PACK( 0, 0 ), /* loops */
/* SHC[0] */ PACK( 1, 0 ),
/* SHC[1] */ PACK( 1, 0 ),
/* SHZ[0] */ PACK( 1, 0 ),
/* SHZ[1] */ PACK( 1, 0 ),
/* SHPIX */ PACK( 1, 0 ), /* loops */
/* IP */ PACK( 0, 0 ), /* loops */
/* MSIRP[0] */ PACK( 2, 0 ),
/* MSIRP[1] */ PACK( 2, 0 ),
/* ALIGNRP */ PACK( 0, 0 ), /* loops */
/* RTDG */ PACK( 0, 0 ),
/* MIAP[0] */ PACK( 2, 0 ),
/* MIAP[1] */ PACK( 2, 0 ),
/* 0x40 */
/* NPUSHB */ PACK( 0, 0 ),
/* NPUSHW */ PACK( 0, 0 ),
/* WS */ PACK( 2, 0 ),
/* RS */ PACK( 1, 1 ),
/* WCVTP */ PACK( 2, 0 ),
/* RCVT */ PACK( 1, 1 ),
/* GC[0] */ PACK( 1, 1 ),
/* GC[1] */ PACK( 1, 1 ),
/* SCFS */ PACK( 2, 0 ),
/* MD[0] */ PACK( 2, 1 ),
/* MD[1] */ PACK( 2, 1 ),
/* MPPEM */ PACK( 0, 1 ),
/* MPS */ PACK( 0, 1 ),
/* FLIPON */ PACK( 0, 0 ),
/* FLIPOFF */ PACK( 0, 0 ),
/* DEBUG */ PACK( 1, 0 ),
/* 0x50 */
/* LT */ PACK( 2, 1 ),
/* LTEQ */ PACK( 2, 1 ),
/* GT */ PACK( 2, 1 ),
/* GTEQ */ PACK( 2, 1 ),
/* EQ */ PACK( 2, 1 ),
/* NEQ */ PACK( 2, 1 ),
/* ODD */ PACK( 1, 1 ),
/* EVEN */ PACK( 1, 1 ),
/* IF */ PACK( 1, 0 ),
/* EIF */ PACK( 0, 0 ),
/* AND */ PACK( 2, 1 ),
/* OR */ PACK( 2, 1 ),
/* NOT */ PACK( 1, 1 ),
/* DELTAP1 */ PACK( 1, 0 ),
/* SDB */ PACK( 1, 0 ),
/* SDS */ PACK( 1, 0 ),
/* 0x60 */
/* ADD */ PACK( 2, 1 ),
/* SUB */ PACK( 2, 1 ),
/* DIV */ PACK( 2, 1 ),
/* MUL */ PACK( 2, 1 ),
/* ABS */ PACK( 1, 1 ),
/* NEG */ PACK( 1, 1 ),
/* FLOOR */ PACK( 1, 1 ),
/* CEILING */ PACK( 1, 1 ),
/* ROUND[0] */ PACK( 1, 1 ),
/* ROUND[1] */ PACK( 1, 1 ),
/* ROUND[2] */ PACK( 1, 1 ),
/* ROUND[3] */ PACK( 1, 1 ),
/* NROUND[0] */ PACK( 1, 1 ),
/* NROUND[1] */ PACK( 1, 1 ),
/* NROUND[2] */ PACK( 1, 1 ),
/* NROUND[3] */ PACK( 1, 1 ),
/* 0x70 */
/* WCVTF */ PACK( 2, 0 ),
/* DELTAP2 */ PACK( 1, 0 ),
/* DELTAP3 */ PACK( 1, 0 ),
/* DELTAC1 */ PACK( 1, 0 ),
/* DELTAC2 */ PACK( 1, 0 ),
/* DELTAC3 */ PACK( 1, 0 ),
/* SROUND */ PACK( 1, 0 ),
/* S45ROUND */ PACK( 1, 0 ),
/* JROT */ PACK( 2, 0 ),
/* JROF */ PACK( 2, 0 ),
/* ROFF */ PACK( 0, 0 ),
/* INS_$7B */ PACK( 0, 0 ),
/* RUTG */ PACK( 0, 0 ),
/* RDTG */ PACK( 0, 0 ),
/* SANGW */ PACK( 1, 0 ),
/* AA */ PACK( 1, 0 ),
/* 0x80 */
/* FLIPPT */ PACK( 0, 0 ), /* loops */
/* FLIPRGON */ PACK( 2, 0 ),
/* FLIPRGOFF */ PACK( 2, 0 ),
/* INS_$83 */ PACK( 0, 0 ),
/* INS_$84 */ PACK( 0, 0 ),
/* SCANCTRL */ PACK( 1, 0 ),
/* SDPVTL[0] */ PACK( 2, 0 ),
/* SDPVTL[1] */ PACK( 2, 0 ),
/* GETINFO */ PACK( 1, 1 ),
/* IDEF */ PACK( 1, 0 ),
/* ROLL */ PACK( 3, 3 ),
/* MAX */ PACK( 2, 1 ),
/* MIN */ PACK( 2, 1 ),
/* SCANTYPE */ PACK( 1, 0 ),
/* INSTCTRL */ PACK( 2, 0 ),
/* INS_$8F */ PACK( 0, 0 ),
/* 0x90 */
/* INS_$90 */ PACK( 0, 0 ),
/* GETVAR */ PACK( 0, 0 ), /* will be handled specially */
/* GETDATA */ PACK( 0, 1 ),
/* INS_$93 */ PACK( 0, 0 ),
/* INS_$94 */ PACK( 0, 0 ),
/* INS_$95 */ PACK( 0, 0 ),
/* INS_$96 */ PACK( 0, 0 ),
/* INS_$97 */ PACK( 0, 0 ),
/* INS_$98 */ PACK( 0, 0 ),
/* INS_$99 */ PACK( 0, 0 ),
/* INS_$9A */ PACK( 0, 0 ),
/* INS_$9B */ PACK( 0, 0 ),
/* INS_$9C */ PACK( 0, 0 ),
/* INS_$9D */ PACK( 0, 0 ),
/* INS_$9E */ PACK( 0, 0 ),
/* INS_$9F */ PACK( 0, 0 ),
/* 0xA0 */
/* INS_$A0 */ PACK( 0, 0 ),
/* INS_$A1 */ PACK( 0, 0 ),
/* INS_$A2 */ PACK( 0, 0 ),
/* INS_$A3 */ PACK( 0, 0 ),
/* INS_$A4 */ PACK( 0, 0 ),
/* INS_$A5 */ PACK( 0, 0 ),
/* INS_$A6 */ PACK( 0, 0 ),
/* INS_$A7 */ PACK( 0, 0 ),
/* INS_$A8 */ PACK( 0, 0 ),
/* INS_$A9 */ PACK( 0, 0 ),
/* INS_$AA */ PACK( 0, 0 ),
/* INS_$AB */ PACK( 0, 0 ),
/* INS_$AC */ PACK( 0, 0 ),
/* INS_$AD */ PACK( 0, 0 ),
/* INS_$AE */ PACK( 0, 0 ),
/* INS_$AF */ PACK( 0, 0 ),
/* 0xB0 */
/* PUSHB[0] */ PACK( 0, 1 ),
/* PUSHB[1] */ PACK( 0, 2 ),
/* PUSHB[2] */ PACK( 0, 3 ),
/* PUSHB[3] */ PACK( 0, 4 ),
/* PUSHB[4] */ PACK( 0, 5 ),
/* PUSHB[5] */ PACK( 0, 6 ),
/* PUSHB[6] */ PACK( 0, 7 ),
/* PUSHB[7] */ PACK( 0, 8 ),
/* PUSHW[0] */ PACK( 0, 1 ),
/* PUSHW[1] */ PACK( 0, 2 ),
/* PUSHW[2] */ PACK( 0, 3 ),
/* PUSHW[3] */ PACK( 0, 4 ),
/* PUSHW[4] */ PACK( 0, 5 ),
/* PUSHW[5] */ PACK( 0, 6 ),
/* PUSHW[6] */ PACK( 0, 7 ),
/* PUSHW[7] */ PACK( 0, 8 ),
/* 0xC0 */
/* MDRP[00] */ PACK( 1, 0 ),
/* MDRP[01] */ PACK( 1, 0 ),
/* MDRP[02] */ PACK( 1, 0 ),
/* MDRP[03] */ PACK( 1, 0 ),
/* MDRP[04] */ PACK( 1, 0 ),
/* MDRP[05] */ PACK( 1, 0 ),
/* MDRP[06] */ PACK( 1, 0 ),
/* MDRP[07] */ PACK( 1, 0 ),
/* MDRP[08] */ PACK( 1, 0 ),
/* MDRP[09] */ PACK( 1, 0 ),
/* MDRP[10] */ PACK( 1, 0 ),
/* MDRP[11] */ PACK( 1, 0 ),
/* MDRP[12] */ PACK( 1, 0 ),
/* MDRP[13] */ PACK( 1, 0 ),
/* MDRP[14] */ PACK( 1, 0 ),
/* MDRP[15] */ PACK( 1, 0 ),
/* 0xD0 */
/* MDRP[16] */ PACK( 1, 0 ),
/* MDRP[17] */ PACK( 1, 0 ),
/* MDRP[18] */ PACK( 1, 0 ),
/* MDRP[19] */ PACK( 1, 0 ),
/* MDRP[20] */ PACK( 1, 0 ),
/* MDRP[21] */ PACK( 1, 0 ),
/* MDRP[22] */ PACK( 1, 0 ),
/* MDRP[23] */ PACK( 1, 0 ),
/* MDRP[24] */ PACK( 1, 0 ),
/* MDRP[25] */ PACK( 1, 0 ),
/* MDRP[26] */ PACK( 1, 0 ),
/* MDRP[27] */ PACK( 1, 0 ),
/* MDRP[28] */ PACK( 1, 0 ),
/* MDRP[29] */ PACK( 1, 0 ),
/* MDRP[30] */ PACK( 1, 0 ),
/* MDRP[31] */ PACK( 1, 0 ),
/* 0xE0 */
/* MIRP[00] */ PACK( 2, 0 ),
/* MIRP[01] */ PACK( 2, 0 ),
/* MIRP[02] */ PACK( 2, 0 ),
/* MIRP[03] */ PACK( 2, 0 ),
/* MIRP[04] */ PACK( 2, 0 ),
/* MIRP[05] */ PACK( 2, 0 ),
/* MIRP[06] */ PACK( 2, 0 ),
/* MIRP[07] */ PACK( 2, 0 ),
/* MIRP[08] */ PACK( 2, 0 ),
/* MIRP[09] */ PACK( 2, 0 ),
/* MIRP[10] */ PACK( 2, 0 ),
/* MIRP[11] */ PACK( 2, 0 ),
/* MIRP[12] */ PACK( 2, 0 ),
/* MIRP[13] */ PACK( 2, 0 ),
/* MIRP[14] */ PACK( 2, 0 ),
/* MIRP[15] */ PACK( 2, 0 ),
/* 0xF0 */
/* MIRP[16] */ PACK( 2, 0 ),
/* MIRP[17] */ PACK( 2, 0 ),
/* MIRP[18] */ PACK( 2, 0 ),
/* MIRP[19] */ PACK( 2, 0 ),
/* MIRP[20] */ PACK( 2, 0 ),
/* MIRP[21] */ PACK( 2, 0 ),
/* MIRP[22] */ PACK( 2, 0 ),
/* MIRP[23] */ PACK( 2, 0 ),
/* MIRP[24] */ PACK( 2, 0 ),
/* MIRP[25] */ PACK( 2, 0 ),
/* MIRP[26] */ PACK( 2, 0 ),
/* MIRP[27] */ PACK( 2, 0 ),
/* MIRP[28] */ PACK( 2, 0 ),
/* MIRP[29] */ PACK( 2, 0 ),
/* MIRP[30] */ PACK( 2, 0 ),
/* MIRP[31] */ PACK( 2, 0 )
};
#ifdef FT_DEBUG_LEVEL_TRACE
/* the first hex digit gives the length of the opcode name; the space */
/* after the digit is here just to increase readability of the source */
/* code */
static
const char* const opcode_name[256] =
{
/* 0x00 */
"8 SVTCA[y]",
"8 SVTCA[x]",
"9 SPVTCA[y]",
"9 SPVTCA[x]",
"9 SFVTCA[y]",
"9 SFVTCA[x]",
"9 SPVTL[||]",
"8 SPVTL[+]",
"9 SFVTL[||]",
"8 SFVTL[+]",
"5 SPVFS",
"5 SFVFS",
"3 GPV",
"3 GFV",
"6 SFVTPV",
"5 ISECT",
/* 0x10 */
"4 SRP0",
"4 SRP1",
"4 SRP2",
"4 SZP0",
"4 SZP1",
"4 SZP2",
"4 SZPS",
"5 SLOOP",
"3 RTG",
"4 RTHG",
"3 SMD",
"4 ELSE",
"4 JMPR",
"6 SCVTCI",
"5 SSWCI",
"3 SSW",
/* 0x20 */
"3 DUP",
"3 POP",
"5 CLEAR",
"4 SWAP",
"5 DEPTH",
"6 CINDEX",
"6 MINDEX",
"8 ALIGNPTS",
"7 INS_$28",
"3 UTP",
"8 LOOPCALL",
"4 CALL",
"4 FDEF",
"4 ENDF",
"6 MDAP[]",
"9 MDAP[rnd]",
/* 0x30 */
"6 IUP[y]",
"6 IUP[x]",
"8 SHP[rp2]",
"8 SHP[rp1]",
"8 SHC[rp2]",
"8 SHC[rp1]",
"8 SHZ[rp2]",
"8 SHZ[rp1]",
"5 SHPIX",
"2 IP",
"7 MSIRP[]",
"A MSIRP[rp0]",
"7 ALIGNRP",
"4 RTDG",
"6 MIAP[]",
"9 MIAP[rnd]",
/* 0x40 */
"6 NPUSHB",
"6 NPUSHW",
"2 WS",
"2 RS",
"5 WCVTP",
"4 RCVT",
"8 GC[curr]",
"8 GC[orig]",
"4 SCFS",
"8 MD[curr]",
"8 MD[orig]",
"5 MPPEM",
"3 MPS",
"6 FLIPON",
"7 FLIPOFF",
"5 DEBUG",
/* 0x50 */
"2 LT",
"4 LTEQ",
"2 GT",
"4 GTEQ",
"2 EQ",
"3 NEQ",
"3 ODD",
"4 EVEN",
"2 IF",
"3 EIF",
"3 AND",
"2 OR",
"3 NOT",
"7 DELTAP1",
"3 SDB",
"3 SDS",
/* 0x60 */
"3 ADD",
"3 SUB",
"3 DIV",
"3 MUL",
"3 ABS",
"3 NEG",
"5 FLOOR",
"7 CEILING",
"8 ROUND[G]",
"8 ROUND[B]",
"8 ROUND[W]",
"7 ROUND[]",
"9 NROUND[G]",
"9 NROUND[B]",
"9 NROUND[W]",
"8 NROUND[]",
/* 0x70 */
"5 WCVTF",
"7 DELTAP2",
"7 DELTAP3",
"7 DELTAC1",
"7 DELTAC2",
"7 DELTAC3",
"6 SROUND",
"8 S45ROUND",
"4 JROT",
"4 JROF",
"4 ROFF",
"7 INS_$7B",
"4 RUTG",
"4 RDTG",
"5 SANGW",
"2 AA",
/* 0x80 */
"6 FLIPPT",
"8 FLIPRGON",
"9 FLIPRGOFF",
"7 INS_$83",
"7 INS_$84",
"8 SCANCTRL",
"A SDPVTL[||]",
"9 SDPVTL[+]",
"7 GETINFO",
"4 IDEF",
"4 ROLL",
"3 MAX",
"3 MIN",
"8 SCANTYPE",
"8 INSTCTRL",
"7 INS_$8F",
/* 0x90 */
"7 INS_$90",
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
"C GETVARIATION",
"7 GETDATA",
#else
"7 INS_$91",
"7 INS_$92",
#endif
"7 INS_$93",
"7 INS_$94",
"7 INS_$95",
"7 INS_$96",
"7 INS_$97",
"7 INS_$98",
"7 INS_$99",
"7 INS_$9A",
"7 INS_$9B",
"7 INS_$9C",
"7 INS_$9D",
"7 INS_$9E",
"7 INS_$9F",
/* 0xA0 */
"7 INS_$A0",
"7 INS_$A1",
"7 INS_$A2",
"7 INS_$A3",
"7 INS_$A4",
"7 INS_$A5",
"7 INS_$A6",
"7 INS_$A7",
"7 INS_$A8",
"7 INS_$A9",
"7 INS_$AA",
"7 INS_$AB",
"7 INS_$AC",
"7 INS_$AD",
"7 INS_$AE",
"7 INS_$AF",
/* 0xB0 */
"8 PUSHB[0]",
"8 PUSHB[1]",
"8 PUSHB[2]",
"8 PUSHB[3]",
"8 PUSHB[4]",
"8 PUSHB[5]",
"8 PUSHB[6]",
"8 PUSHB[7]",
"8 PUSHW[0]",
"8 PUSHW[1]",
"8 PUSHW[2]",
"8 PUSHW[3]",
"8 PUSHW[4]",
"8 PUSHW[5]",
"8 PUSHW[6]",
"8 PUSHW[7]",
/* 0xC0 */
"7 MDRP[G]",
"7 MDRP[B]",
"7 MDRP[W]",
"6 MDRP[]",
"8 MDRP[rG]",
"8 MDRP[rB]",
"8 MDRP[rW]",
"7 MDRP[r]",
"8 MDRP[mG]",
"8 MDRP[mB]",
"8 MDRP[mW]",
"7 MDRP[m]",
"9 MDRP[mrG]",
"9 MDRP[mrB]",
"9 MDRP[mrW]",
"8 MDRP[mr]",
/* 0xD0 */
"8 MDRP[pG]",
"8 MDRP[pB]",
"8 MDRP[pW]",
"7 MDRP[p]",
"9 MDRP[prG]",
"9 MDRP[prB]",
"9 MDRP[prW]",
"8 MDRP[pr]",
"9 MDRP[pmG]",
"9 MDRP[pmB]",
"9 MDRP[pmW]",
"8 MDRP[pm]",
"A MDRP[pmrG]",
"A MDRP[pmrB]",
"A MDRP[pmrW]",
"9 MDRP[pmr]",
/* 0xE0 */
"7 MIRP[G]",
"7 MIRP[B]",
"7 MIRP[W]",
"6 MIRP[]",
"8 MIRP[rG]",
"8 MIRP[rB]",
"8 MIRP[rW]",
"7 MIRP[r]",
"8 MIRP[mG]",
"8 MIRP[mB]",
"8 MIRP[mW]",
"7 MIRP[m]",
"9 MIRP[mrG]",
"9 MIRP[mrB]",
"9 MIRP[mrW]",
"8 MIRP[mr]",
/* 0xF0 */
"8 MIRP[pG]",
"8 MIRP[pB]",
"8 MIRP[pW]",
"7 MIRP[p]",
"9 MIRP[prG]",
"9 MIRP[prB]",
"9 MIRP[prW]",
"8 MIRP[pr]",
"9 MIRP[pmG]",
"9 MIRP[pmB]",
"9 MIRP[pmW]",
"8 MIRP[pm]",
"A MIRP[pmrG]",
"A MIRP[pmrB]",
"A MIRP[pmrW]",
"9 MIRP[pmr]"
};
#endif /* FT_DEBUG_LEVEL_TRACE */
static
const FT_Char opcode_length[256] =
{
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-1,-2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
2, 3, 4, 5, 6, 7, 8, 9, 3, 5, 7, 9, 11,13,15,17,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
};
#undef PACK
#ifndef FT_CONFIG_OPTION_NO_ASSEMBLER
#if defined( __arm__ ) && \
( defined( __thumb2__ ) || !defined( __thumb__ ) )
#define TT_MulFix14 TT_MulFix14_arm
static FT_Int32
TT_MulFix14_arm( FT_Int32 a,
FT_Int b )
{
FT_Int32 t, t2;
#if defined( __CC_ARM ) || defined( __ARMCC__ )
__asm
{
smull t2, t, b, a /* (lo=t2,hi=t) = a*b */
mov a, t, asr #31 /* a = (hi >> 31) */
add a, a, #0x2000 /* a += 0x2000 */
adds t2, t2, a /* t2 += a */
adc t, t, #0 /* t += carry */
mov a, t2, lsr #14 /* a = t2 >> 14 */
orr a, a, t, lsl #18 /* a |= t << 18 */
}
#elif defined( __GNUC__ )
__asm__ __volatile__ (
"smull %1, %2, %4, %3\n\t" /* (lo=%1,hi=%2) = a*b */
"mov %0, %2, asr #31\n\t" /* %0 = (hi >> 31) */
#if defined( __clang__ ) && defined( __thumb2__ )
"add.w %0, %0, #0x2000\n\t" /* %0 += 0x2000 */
#else
"add %0, %0, #0x2000\n\t" /* %0 += 0x2000 */
#endif
"adds %1, %1, %0\n\t" /* %1 += %0 */
"adc %2, %2, #0\n\t" /* %2 += carry */
"mov %0, %1, lsr #14\n\t" /* %0 = %1 >> 16 */
"orr %0, %0, %2, lsl #18\n\t" /* %0 |= %2 << 16 */
: "=r"(a), "=&r"(t2), "=&r"(t)
: "r"(a), "r"(b)
: "cc" );
#endif
return a;
}
#endif /* __arm__ && ( __thumb2__ || !__thumb__ ) */
#endif /* !FT_CONFIG_OPTION_NO_ASSEMBLER */
#if defined( __GNUC__ ) && \
( defined( __i386__ ) || defined( __x86_64__ ) )
#define TT_MulFix14 TT_MulFix14_long_long
/* Temporarily disable the warning that C90 doesn't support `long long'. */
#if ( __GNUC__ * 100 + __GNUC_MINOR__ ) >= 406
#pragma GCC diagnostic push
#endif
#pragma GCC diagnostic ignored "-Wlong-long"
/* This is declared `noinline' because inlining the function results */
/* in slower code. The `pure' attribute indicates that the result */
/* only depends on the parameters. */
static __attribute__(( noinline ))
__attribute__(( pure )) FT_Int32
TT_MulFix14_long_long( FT_Int32 a,
FT_Int b )
{
long long ret = (long long)a * b;
/* The following line assumes that right shifting of signed values */
/* will actually preserve the sign bit. The exact behaviour is */
/* undefined, but this is true on x86 and x86_64. */
long long tmp = ret >> 63;
ret += 0x2000 + tmp;
return (FT_Int32)( ret >> 14 );
}
#if ( __GNUC__ * 100 + __GNUC_MINOR__ ) >= 406
#pragma GCC diagnostic pop
#endif
#endif /* __GNUC__ && ( __i386__ || __x86_64__ ) */
#ifndef TT_MulFix14
/* Compute (a*b)/2^14 with maximum accuracy and rounding. */
/* This is optimized to be faster than calling FT_MulFix() */
/* for platforms where sizeof(int) == 2. */
static FT_Int32
TT_MulFix14( FT_Int32 a,
FT_Int b )
{
FT_Int32 sign;
FT_UInt32 ah, al, mid, lo, hi;
sign = a ^ b;
if ( a < 0 )
a = -a;
if ( b < 0 )
b = -b;
ah = (FT_UInt32)( ( a >> 16 ) & 0xFFFFU );
al = (FT_UInt32)( a & 0xFFFFU );
lo = al * b;
mid = ah * b;
hi = mid >> 16;
mid = ( mid << 16 ) + ( 1 << 13 ); /* rounding */
lo += mid;
if ( lo < mid )
hi += 1;
mid = ( lo >> 14 ) | ( hi << 18 );
return sign >= 0 ? (FT_Int32)mid : -(FT_Int32)mid;
}
#endif /* !TT_MulFix14 */
#if defined( __GNUC__ ) && \
( defined( __i386__ ) || \
defined( __x86_64__ ) || \
defined( __arm__ ) )
#define TT_DotFix14 TT_DotFix14_long_long
#if ( __GNUC__ * 100 + __GNUC_MINOR__ ) >= 406
#pragma GCC diagnostic push
#endif
#pragma GCC diagnostic ignored "-Wlong-long"
static __attribute__(( pure )) FT_Int32
TT_DotFix14_long_long( FT_Int32 ax,
FT_Int32 ay,
FT_Int bx,
FT_Int by )
{
/* Temporarily disable the warning that C90 doesn't support */
/* `long long'. */
long long temp1 = (long long)ax * bx;
long long temp2 = (long long)ay * by;
temp1 += temp2;
temp2 = temp1 >> 63;
temp1 += 0x2000 + temp2;
return (FT_Int32)( temp1 >> 14 );
}
#if ( __GNUC__ * 100 + __GNUC_MINOR__ ) >= 406
#pragma GCC diagnostic pop
#endif
#endif /* __GNUC__ && (__arm__ || __i386__ || __x86_64__) */
#ifndef TT_DotFix14
/* compute (ax*bx+ay*by)/2^14 with maximum accuracy and rounding */
static FT_Int32
TT_DotFix14( FT_Int32 ax,
FT_Int32 ay,
FT_Int bx,
FT_Int by )
{
FT_Int32 m, s, hi1, hi2, hi;
FT_UInt32 l, lo1, lo2, lo;
/* compute ax*bx as 64-bit value */
l = (FT_UInt32)( ( ax & 0xFFFFU ) * bx );
m = ( ax >> 16 ) * bx;
lo1 = l + ( (FT_UInt32)m << 16 );
hi1 = ( m >> 16 ) + ( (FT_Int32)l >> 31 ) + ( lo1 < l );
/* compute ay*by as 64-bit value */
l = (FT_UInt32)( ( ay & 0xFFFFU ) * by );
m = ( ay >> 16 ) * by;
lo2 = l + ( (FT_UInt32)m << 16 );
hi2 = ( m >> 16 ) + ( (FT_Int32)l >> 31 ) + ( lo2 < l );
/* add them */
lo = lo1 + lo2;
hi = hi1 + hi2 + ( lo < lo1 );
/* divide the result by 2^14 with rounding */
s = hi >> 31;
l = lo + (FT_UInt32)s;
hi += s + ( l < lo );
lo = l;
l = lo + 0x2000U;
hi += ( l < lo );
return (FT_Int32)( ( (FT_UInt32)hi << 18 ) | ( l >> 14 ) );
}
#endif /* TT_DotFix14 */
/**************************************************************************
*
* @Function:
* Current_Ratio
*
* @Description:
* Returns the current aspect ratio scaling factor depending on the
* projection vector's state and device resolutions.
*
* @Return:
* The aspect ratio in 16.16 format, always <= 1.0 .
*/
static FT_Long
Current_Ratio( TT_ExecContext exc )
{
if ( !exc->tt_metrics.ratio )
{
if ( exc->GS.projVector.y == 0 )
exc->tt_metrics.ratio = exc->tt_metrics.x_ratio;
else if ( exc->GS.projVector.x == 0 )
exc->tt_metrics.ratio = exc->tt_metrics.y_ratio;
else
{
FT_F26Dot6 x, y;
x = TT_MulFix14( exc->tt_metrics.x_ratio,
exc->GS.projVector.x );
y = TT_MulFix14( exc->tt_metrics.y_ratio,
exc->GS.projVector.y );
exc->tt_metrics.ratio = FT_Hypot( x, y );
}
}
return exc->tt_metrics.ratio;
}
FT_CALLBACK_DEF( FT_Long )
Current_Ppem( TT_ExecContext exc )
{
return exc->tt_metrics.ppem;
}
FT_CALLBACK_DEF( FT_Long )
Current_Ppem_Stretched( TT_ExecContext exc )
{
return FT_MulFix( exc->tt_metrics.ppem, Current_Ratio( exc ) );
}
/**************************************************************************
*
* Functions related to the control value table (CVT).
*
*/
FT_CALLBACK_DEF( FT_F26Dot6 )
Read_CVT( TT_ExecContext exc,
FT_ULong idx )
{
return exc->cvt[idx];
}
FT_CALLBACK_DEF( FT_F26Dot6 )
Read_CVT_Stretched( TT_ExecContext exc,
FT_ULong idx )
{
return FT_MulFix( exc->cvt[idx], Current_Ratio( exc ) );
}
static void
Modify_CVT_Check( TT_ExecContext exc )
{
/* TT_RunIns sets origCvt and restores cvt to origCvt when done. */
if ( exc->iniRange == tt_coderange_glyph &&
exc->cvt == exc->origCvt )
{
exc->error = Update_Max( exc->memory,
&exc->glyfCvtSize,
sizeof ( FT_Long ),
(void*)&exc->glyfCvt,
exc->cvtSize );
if ( exc->error )
return;
FT_ARRAY_COPY( exc->glyfCvt, exc->cvt, exc->glyfCvtSize );
exc->cvt = exc->glyfCvt;
}
}
FT_CALLBACK_DEF( void )
Write_CVT( TT_ExecContext exc,
FT_ULong idx,
FT_F26Dot6 value )
{
Modify_CVT_Check( exc );
if ( exc->error )
return;
exc->cvt[idx] = value;
}
FT_CALLBACK_DEF( void )
Write_CVT_Stretched( TT_ExecContext exc,
FT_ULong idx,
FT_F26Dot6 value )
{
Modify_CVT_Check( exc );
if ( exc->error )
return;
exc->cvt[idx] = FT_DivFix( value, Current_Ratio( exc ) );
}
FT_CALLBACK_DEF( void )
Move_CVT( TT_ExecContext exc,
FT_ULong idx,
FT_F26Dot6 value )
{
Modify_CVT_Check( exc );
if ( exc->error )
return;
exc->cvt[idx] = ADD_LONG( exc->cvt[idx], value );
}
FT_CALLBACK_DEF( void )
Move_CVT_Stretched( TT_ExecContext exc,
FT_ULong idx,
FT_F26Dot6 value )
{
Modify_CVT_Check( exc );
if ( exc->error )
return;
exc->cvt[idx] = ADD_LONG( exc->cvt[idx],
FT_DivFix( value, Current_Ratio( exc ) ) );
}
/**************************************************************************
*
* @Function:
* GetShortIns
*
* @Description:
* Returns a short integer taken from the instruction stream at
* address IP.
*
* @Return:
* Short read at code[IP].
*
* @Note:
* This one could become a macro.
*/
static FT_Short
GetShortIns( TT_ExecContext exc )
{
/* Reading a byte stream so there is no endianness (DaveP) */
exc->IP += 2;
return (FT_Short)( ( exc->code[exc->IP - 2] << 8 ) +
exc->code[exc->IP - 1] );
}
/**************************************************************************
*
* @Function:
* Ins_Goto_CodeRange
*
* @Description:
* Goes to a certain code range in the instruction stream.
*
* @Input:
* aRange ::
* The index of the code range.
*
* aIP ::
* The new IP address in the code range.
*
* @Return:
* SUCCESS or FAILURE.
*/
static FT_Bool
Ins_Goto_CodeRange( TT_ExecContext exc,
FT_Int aRange,
FT_Long aIP )
{
TT_CodeRange* range;
if ( aRange < 1 || aRange > 3 )
{
exc->error = FT_THROW( Bad_Argument );
return FAILURE;
}
range = &exc->codeRangeTable[aRange - 1];
if ( !range->base ) /* invalid coderange */
{
exc->error = FT_THROW( Invalid_CodeRange );
return FAILURE;
}
/* NOTE: Because the last instruction of a program may be a CALL */
/* which will return to the first byte *after* the code */
/* range, we test for aIP <= Size, instead of aIP < Size. */
if ( aIP > range->size )
{
exc->error = FT_THROW( Code_Overflow );
return FAILURE;
}
exc->code = range->base;
exc->codeSize = range->size;
exc->IP = aIP;
exc->curRange = aRange;
return SUCCESS;
}
/*
*
* Apple's TrueType specification at
*
* https://developer.apple.com/fonts/TrueType-Reference-Manual/RM02/Chap2.html#order
*
* gives the following order of operations in instructions that move
* points.
*
* - check single width cut-in (MIRP, MDRP)
*
* - check control value cut-in (MIRP, MIAP)
*
* - apply engine compensation (MIRP, MDRP)
*
* - round distance (MIRP, MDRP) or value (MIAP, MDAP)
*
* - check minimum distance (MIRP,MDRP)
*
* - move point (MIRP, MDRP, MIAP, MSIRP, MDAP)
*
* For rounding instructions, engine compensation happens before rounding.
*
*/
/**************************************************************************
*
* @Function:
* Direct_Move
*
* @Description:
* Moves a point by a given distance along the freedom vector. The
* point will be `touched'.
*
* @Input:
* point ::
* The index of the point to move.
*
* distance ::
* The distance to apply.
*
* @InOut:
* zone ::
* The affected glyph zone.
*
* @Note:
* See `ttinterp.h' for details on backward compatibility mode.
* `Touches' the point.
*/
static void
Direct_Move( TT_ExecContext exc,
TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_F26Dot6 v;
v = exc->GS.freeVector.x;
if ( v != 0 )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
( !exc->ignore_x_mode ||
( exc->sph_tweak_flags & SPH_TWEAK_ALLOW_X_DMOVE ) ) )
zone->cur[point].x = ADD_LONG( zone->cur[point].x,
FT_MulDiv( distance,
v,
exc->F_dot_P ) );
else
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* Exception to the post-IUP curfew: Allow the x component of */
/* diagonal moves, but only post-IUP. DejaVu tries to adjust */
/* diagonal stems like on `Z' and `z' post-IUP. */
if ( SUBPIXEL_HINTING_MINIMAL && !exc->backward_compatibility )
zone->cur[point].x = ADD_LONG( zone->cur[point].x,
FT_MulDiv( distance,
v,
exc->F_dot_P ) );
else
#endif
if ( NO_SUBPIXEL_HINTING )
zone->cur[point].x = ADD_LONG( zone->cur[point].x,
FT_MulDiv( distance,
v,
exc->F_dot_P ) );
zone->tags[point] |= FT_CURVE_TAG_TOUCH_X;
}
v = exc->GS.freeVector.y;
if ( v != 0 )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
if ( !( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility &&
exc->iupx_called &&
exc->iupy_called ) )
#endif
zone->cur[point].y = ADD_LONG( zone->cur[point].y,
FT_MulDiv( distance,
v,
exc->F_dot_P ) );
zone->tags[point] |= FT_CURVE_TAG_TOUCH_Y;
}
}
/**************************************************************************
*
* @Function:
* Direct_Move_Orig
*
* @Description:
* Moves the *original* position of a point by a given distance along
* the freedom vector. Obviously, the point will not be `touched'.
*
* @Input:
* point ::
* The index of the point to move.
*
* distance ::
* The distance to apply.
*
* @InOut:
* zone ::
* The affected glyph zone.
*/
static void
Direct_Move_Orig( TT_ExecContext exc,
TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_F26Dot6 v;
v = exc->GS.freeVector.x;
if ( v != 0 )
zone->org[point].x = ADD_LONG( zone->org[point].x,
FT_MulDiv( distance,
v,
exc->F_dot_P ) );
v = exc->GS.freeVector.y;
if ( v != 0 )
zone->org[point].y = ADD_LONG( zone->org[point].y,
FT_MulDiv( distance,
v,
exc->F_dot_P ) );
}
/**************************************************************************
*
* Special versions of Direct_Move()
*
* The following versions are used whenever both vectors are both
* along one of the coordinate unit vectors, i.e. in 90% of the cases.
* See `ttinterp.h' for details on backward compatibility mode.
*
*/
static void
Direct_Move_X( TT_ExecContext exc,
TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY && !exc->ignore_x_mode )
zone->cur[point].x = ADD_LONG( zone->cur[point].x, distance );
else
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
if ( SUBPIXEL_HINTING_MINIMAL && !exc->backward_compatibility )
zone->cur[point].x = ADD_LONG( zone->cur[point].x, distance );
else
#endif
if ( NO_SUBPIXEL_HINTING )
zone->cur[point].x = ADD_LONG( zone->cur[point].x, distance );
zone->tags[point] |= FT_CURVE_TAG_TOUCH_X;
}
static void
Direct_Move_Y( TT_ExecContext exc,
TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_UNUSED( exc );
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
if ( !( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility &&
exc->iupx_called && exc->iupy_called ) )
#endif
zone->cur[point].y = ADD_LONG( zone->cur[point].y, distance );
zone->tags[point] |= FT_CURVE_TAG_TOUCH_Y;
}
/**************************************************************************
*
* Special versions of Direct_Move_Orig()
*
* The following versions are used whenever both vectors are both
* along one of the coordinate unit vectors, i.e. in 90% of the cases.
*
*/
static void
Direct_Move_Orig_X( TT_ExecContext exc,
TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_UNUSED( exc );
zone->org[point].x = ADD_LONG( zone->org[point].x, distance );
}
static void
Direct_Move_Orig_Y( TT_ExecContext exc,
TT_GlyphZone zone,
FT_UShort point,
FT_F26Dot6 distance )
{
FT_UNUSED( exc );
zone->org[point].y = ADD_LONG( zone->org[point].y, distance );
}
/**************************************************************************
*
* @Function:
* Round_None
*
* @Description:
* Does not round, but adds engine compensation.
*
* @Input:
* distance ::
* The distance (not) to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* The compensated distance.
*/
static FT_F26Dot6
Round_None( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = ADD_LONG( distance, compensation );
if ( val < 0 )
val = 0;
}
else
{
val = SUB_LONG( distance, compensation );
if ( val > 0 )
val = 0;
}
return val;
}
/**************************************************************************
*
* @Function:
* Round_To_Grid
*
* @Description:
* Rounds value to grid after adding engine compensation.
*
* @Input:
* distance ::
* The distance to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* Rounded distance.
*/
static FT_F26Dot6
Round_To_Grid( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = FT_PIX_ROUND_LONG( ADD_LONG( distance, compensation ) );
if ( val < 0 )
val = 0;
}
else
{
val = NEG_LONG( FT_PIX_ROUND_LONG( SUB_LONG( compensation,
distance ) ) );
if ( val > 0 )
val = 0;
}
return val;
}
/**************************************************************************
*
* @Function:
* Round_To_Half_Grid
*
* @Description:
* Rounds value to half grid after adding engine compensation.
*
* @Input:
* distance ::
* The distance to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* Rounded distance.
*/
static FT_F26Dot6
Round_To_Half_Grid( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = ADD_LONG( FT_PIX_FLOOR( ADD_LONG( distance, compensation ) ),
32 );
if ( val < 0 )
val = 32;
}
else
{
val = NEG_LONG( ADD_LONG( FT_PIX_FLOOR( SUB_LONG( compensation,
distance ) ),
32 ) );
if ( val > 0 )
val = -32;
}
return val;
}
/**************************************************************************
*
* @Function:
* Round_Down_To_Grid
*
* @Description:
* Rounds value down to grid after adding engine compensation.
*
* @Input:
* distance ::
* The distance to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* Rounded distance.
*/
static FT_F26Dot6
Round_Down_To_Grid( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = FT_PIX_FLOOR( ADD_LONG( distance, compensation ) );
if ( val < 0 )
val = 0;
}
else
{
val = NEG_LONG( FT_PIX_FLOOR( SUB_LONG( compensation, distance ) ) );
if ( val > 0 )
val = 0;
}
return val;
}
/**************************************************************************
*
* @Function:
* Round_Up_To_Grid
*
* @Description:
* Rounds value up to grid after adding engine compensation.
*
* @Input:
* distance ::
* The distance to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* Rounded distance.
*/
static FT_F26Dot6
Round_Up_To_Grid( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = FT_PIX_CEIL_LONG( ADD_LONG( distance, compensation ) );
if ( val < 0 )
val = 0;
}
else
{
val = NEG_LONG( FT_PIX_CEIL_LONG( SUB_LONG( compensation,
distance ) ) );
if ( val > 0 )
val = 0;
}
return val;
}
/**************************************************************************
*
* @Function:
* Round_To_Double_Grid
*
* @Description:
* Rounds value to double grid after adding engine compensation.
*
* @Input:
* distance ::
* The distance to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* Rounded distance.
*/
static FT_F26Dot6
Round_To_Double_Grid( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = FT_PAD_ROUND_LONG( ADD_LONG( distance, compensation ), 32 );
if ( val < 0 )
val = 0;
}
else
{
val = NEG_LONG( FT_PAD_ROUND_LONG( SUB_LONG( compensation, distance ),
32 ) );
if ( val > 0 )
val = 0;
}
return val;
}
/**************************************************************************
*
* @Function:
* Round_Super
*
* @Description:
* Super-rounds value to grid after adding engine compensation.
*
* @Input:
* distance ::
* The distance to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* Rounded distance.
*
* @Note:
* The TrueType specification says very little about the relationship
* between rounding and engine compensation. However, it seems from
* the description of super round that we should add the compensation
* before rounding.
*/
static FT_F26Dot6
Round_Super( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = ADD_LONG( distance,
exc->threshold - exc->phase + compensation ) &
-exc->period;
val = ADD_LONG( val, exc->phase );
if ( val < 0 )
val = exc->phase;
}
else
{
val = NEG_LONG( SUB_LONG( exc->threshold - exc->phase + compensation,
distance ) &
-exc->period );
val = SUB_LONG( val, exc->phase );
if ( val > 0 )
val = -exc->phase;
}
return val;
}
/**************************************************************************
*
* @Function:
* Round_Super_45
*
* @Description:
* Super-rounds value to grid after adding engine compensation.
*
* @Input:
* distance ::
* The distance to round.
*
* color ::
* The engine compensation color.
*
* @Return:
* Rounded distance.
*
* @Note:
* There is a separate function for Round_Super_45() as we may need
* greater precision.
*/
static FT_F26Dot6
Round_Super_45( TT_ExecContext exc,
FT_F26Dot6 distance,
FT_Int color )
{
FT_F26Dot6 compensation = exc->tt_metrics.compensations[color];
FT_F26Dot6 val;
if ( distance >= 0 )
{
val = ( ADD_LONG( distance,
exc->threshold - exc->phase + compensation ) /
exc->period ) * exc->period;
val = ADD_LONG( val, exc->phase );
if ( val < 0 )
val = exc->phase;
}
else
{
val = NEG_LONG( ( SUB_LONG( exc->threshold - exc->phase + compensation,
distance ) /
exc->period ) * exc->period );
val = SUB_LONG( val, exc->phase );
if ( val > 0 )
val = -exc->phase;
}
return val;
}
/**************************************************************************
*
* @Function:
* Compute_Round
*
* @Description:
* Sets the rounding mode.
*
* @Input:
* round_mode ::
* The rounding mode to be used.
*/
static void
Compute_Round( TT_ExecContext exc,
FT_Byte round_mode )
{
switch ( round_mode )
{
case TT_Round_Off:
exc->func_round = (TT_Round_Func)Round_None;
break;
case TT_Round_To_Grid:
exc->func_round = (TT_Round_Func)Round_To_Grid;
break;
case TT_Round_Up_To_Grid:
exc->func_round = (TT_Round_Func)Round_Up_To_Grid;
break;
case TT_Round_Down_To_Grid:
exc->func_round = (TT_Round_Func)Round_Down_To_Grid;
break;
case TT_Round_To_Half_Grid:
exc->func_round = (TT_Round_Func)Round_To_Half_Grid;
break;
case TT_Round_To_Double_Grid:
exc->func_round = (TT_Round_Func)Round_To_Double_Grid;
break;
case TT_Round_Super:
exc->func_round = (TT_Round_Func)Round_Super;
break;
case TT_Round_Super_45:
exc->func_round = (TT_Round_Func)Round_Super_45;
break;
}
}
/**************************************************************************
*
* @Function:
* SetSuperRound
*
* @Description:
* Sets Super Round parameters.
*
* @Input:
* GridPeriod ::
* The grid period.
*
* selector ::
* The SROUND opcode.
*/
static void
SetSuperRound( TT_ExecContext exc,
FT_F2Dot14 GridPeriod,
FT_Long selector )
{
switch ( (FT_Int)( selector & 0xC0 ) )
{
case 0:
exc->period = GridPeriod / 2;
break;
case 0x40:
exc->period = GridPeriod;
break;
case 0x80:
exc->period = GridPeriod * 2;
break;
/* This opcode is reserved, but... */
case 0xC0:
exc->period = GridPeriod;
break;
}
switch ( (FT_Int)( selector & 0x30 ) )
{
case 0:
exc->phase = 0;
break;
case 0x10:
exc->phase = exc->period / 4;
break;
case 0x20:
exc->phase = exc->period / 2;
break;
case 0x30:
exc->phase = exc->period * 3 / 4;
break;
}
if ( ( selector & 0x0F ) == 0 )
exc->threshold = exc->period - 1;
else
exc->threshold = ( (FT_Int)( selector & 0x0F ) - 4 ) * exc->period / 8;
/* convert to F26Dot6 format */
exc->period >>= 8;
exc->phase >>= 8;
exc->threshold >>= 8;
}
/**************************************************************************
*
* @Function:
* Project
*
* @Description:
* Computes the projection of vector given by (v2-v1) along the
* current projection vector.
*
* @Input:
* v1 ::
* First input vector.
* v2 ::
* Second input vector.
*
* @Return:
* The distance in F26dot6 format.
*/
static FT_F26Dot6
Project( TT_ExecContext exc,
FT_Pos dx,
FT_Pos dy )
{
return TT_DotFix14( dx, dy,
exc->GS.projVector.x,
exc->GS.projVector.y );
}
/**************************************************************************
*
* @Function:
* Dual_Project
*
* @Description:
* Computes the projection of the vector given by (v2-v1) along the
* current dual vector.
*
* @Input:
* v1 ::
* First input vector.
* v2 ::
* Second input vector.
*
* @Return:
* The distance in F26dot6 format.
*/
static FT_F26Dot6
Dual_Project( TT_ExecContext exc,
FT_Pos dx,
FT_Pos dy )
{
return TT_DotFix14( dx, dy,
exc->GS.dualVector.x,
exc->GS.dualVector.y );
}
/**************************************************************************
*
* @Function:
* Project_x
*
* @Description:
* Computes the projection of the vector given by (v2-v1) along the
* horizontal axis.
*
* @Input:
* v1 ::
* First input vector.
* v2 ::
* Second input vector.
*
* @Return:
* The distance in F26dot6 format.
*/
static FT_F26Dot6
Project_x( TT_ExecContext exc,
FT_Pos dx,
FT_Pos dy )
{
FT_UNUSED( exc );
FT_UNUSED( dy );
return dx;
}
/**************************************************************************
*
* @Function:
* Project_y
*
* @Description:
* Computes the projection of the vector given by (v2-v1) along the
* vertical axis.
*
* @Input:
* v1 ::
* First input vector.
* v2 ::
* Second input vector.
*
* @Return:
* The distance in F26dot6 format.
*/
static FT_F26Dot6
Project_y( TT_ExecContext exc,
FT_Pos dx,
FT_Pos dy )
{
FT_UNUSED( exc );
FT_UNUSED( dx );
return dy;
}
/**************************************************************************
*
* @Function:
* Compute_Funcs
*
* @Description:
* Computes the projection and movement function pointers according
* to the current graphics state.
*/
static void
Compute_Funcs( TT_ExecContext exc )
{
if ( exc->GS.freeVector.x == 0x4000 )
exc->F_dot_P = exc->GS.projVector.x;
else if ( exc->GS.freeVector.y == 0x4000 )
exc->F_dot_P = exc->GS.projVector.y;
else
exc->F_dot_P =
( (FT_Long)exc->GS.projVector.x * exc->GS.freeVector.x +
(FT_Long)exc->GS.projVector.y * exc->GS.freeVector.y ) >> 14;
if ( exc->GS.projVector.x == 0x4000 )
exc->func_project = (TT_Project_Func)Project_x;
else if ( exc->GS.projVector.y == 0x4000 )
exc->func_project = (TT_Project_Func)Project_y;
else
exc->func_project = (TT_Project_Func)Project;
if ( exc->GS.dualVector.x == 0x4000 )
exc->func_dualproj = (TT_Project_Func)Project_x;
else if ( exc->GS.dualVector.y == 0x4000 )
exc->func_dualproj = (TT_Project_Func)Project_y;
else
exc->func_dualproj = (TT_Project_Func)Dual_Project;
exc->func_move = (TT_Move_Func)Direct_Move;
exc->func_move_orig = (TT_Move_Func)Direct_Move_Orig;
if ( exc->F_dot_P == 0x4000L )
{
if ( exc->GS.freeVector.x == 0x4000 )
{
exc->func_move = (TT_Move_Func)Direct_Move_X;
exc->func_move_orig = (TT_Move_Func)Direct_Move_Orig_X;
}
else if ( exc->GS.freeVector.y == 0x4000 )
{
exc->func_move = (TT_Move_Func)Direct_Move_Y;
exc->func_move_orig = (TT_Move_Func)Direct_Move_Orig_Y;
}
}
/* at small sizes, F_dot_P can become too small, resulting */
/* in overflows and `spikes' in a number of glyphs like `w'. */
if ( FT_ABS( exc->F_dot_P ) < 0x400L )
exc->F_dot_P = 0x4000L;
/* Disable cached aspect ratio */
exc->tt_metrics.ratio = 0;
}
/**************************************************************************
*
* @Function:
* Normalize
*
* @Description:
* Norms a vector.
*
* @Input:
* Vx ::
* The horizontal input vector coordinate.
* Vy ::
* The vertical input vector coordinate.
*
* @Output:
* R ::
* The normed unit vector.
*
* @Return:
* Returns FAILURE if a vector parameter is zero.
*
* @Note:
* In case Vx and Vy are both zero, `Normalize' returns SUCCESS, and
* R is undefined.
*/
static FT_Bool
Normalize( FT_F26Dot6 Vx,
FT_F26Dot6 Vy,
FT_UnitVector* R )
{
FT_Vector V;
if ( Vx == 0 && Vy == 0 )
{
/* XXX: UNDOCUMENTED! It seems that it is possible to try */
/* to normalize the vector (0,0). Return immediately. */
return SUCCESS;
}
V.x = Vx;
V.y = Vy;
FT_Vector_NormLen( &V );
R->x = (FT_F2Dot14)( V.x / 4 );
R->y = (FT_F2Dot14)( V.y / 4 );
return SUCCESS;
}
/**************************************************************************
*
* Here we start with the implementation of the various opcodes.
*
*/
#define ARRAY_BOUND_ERROR \
do \
{ \
exc->error = FT_THROW( Invalid_Reference ); \
return; \
} while (0)
/**************************************************************************
*
* MPPEM[]: Measure Pixel Per EM
* Opcode range: 0x4B
* Stack: --> Euint16
*/
static void
Ins_MPPEM( TT_ExecContext exc,
FT_Long* args )
{
args[0] = exc->func_cur_ppem( exc );
}
/**************************************************************************
*
* MPS[]: Measure Point Size
* Opcode range: 0x4C
* Stack: --> Euint16
*/
static void
Ins_MPS( TT_ExecContext exc,
FT_Long* args )
{
if ( NO_SUBPIXEL_HINTING )
{
/* Microsoft's GDI bytecode interpreter always returns value 12; */
/* we return the current PPEM value instead. */
args[0] = exc->func_cur_ppem( exc );
}
else
{
/* A possible practical application of the MPS instruction is to */
/* implement optical scaling and similar features, which should be */
/* based on perceptual attributes, thus independent of the */
/* resolution. */
args[0] = exc->pointSize;
}
}
/**************************************************************************
*
* DUP[]: DUPlicate the stack's top element
* Opcode range: 0x20
* Stack: StkElt --> StkElt StkElt
*/
static void
Ins_DUP( FT_Long* args )
{
args[1] = args[0];
}
/**************************************************************************
*
* POP[]: POP the stack's top element
* Opcode range: 0x21
* Stack: StkElt -->
*/
static void
Ins_POP( void )
{
/* nothing to do */
}
/**************************************************************************
*
* CLEAR[]: CLEAR the entire stack
* Opcode range: 0x22
* Stack: StkElt... -->
*/
static void
Ins_CLEAR( TT_ExecContext exc )
{
exc->new_top = 0;
}
/**************************************************************************
*
* SWAP[]: SWAP the stack's top two elements
* Opcode range: 0x23
* Stack: 2 * StkElt --> 2 * StkElt
*/
static void
Ins_SWAP( FT_Long* args )
{
FT_Long L;
L = args[0];
args[0] = args[1];
args[1] = L;
}
/**************************************************************************
*
* DEPTH[]: return the stack DEPTH
* Opcode range: 0x24
* Stack: --> uint32
*/
static void
Ins_DEPTH( TT_ExecContext exc,
FT_Long* args )
{
args[0] = exc->top;
}
/**************************************************************************
*
* LT[]: Less Than
* Opcode range: 0x50
* Stack: int32? int32? --> bool
*/
static void
Ins_LT( FT_Long* args )
{
args[0] = ( args[0] < args[1] );
}
/**************************************************************************
*
* LTEQ[]: Less Than or EQual
* Opcode range: 0x51
* Stack: int32? int32? --> bool
*/
static void
Ins_LTEQ( FT_Long* args )
{
args[0] = ( args[0] <= args[1] );
}
/**************************************************************************
*
* GT[]: Greater Than
* Opcode range: 0x52
* Stack: int32? int32? --> bool
*/
static void
Ins_GT( FT_Long* args )
{
args[0] = ( args[0] > args[1] );
}
/**************************************************************************
*
* GTEQ[]: Greater Than or EQual
* Opcode range: 0x53
* Stack: int32? int32? --> bool
*/
static void
Ins_GTEQ( FT_Long* args )
{
args[0] = ( args[0] >= args[1] );
}
/**************************************************************************
*
* EQ[]: EQual
* Opcode range: 0x54
* Stack: StkElt StkElt --> bool
*/
static void
Ins_EQ( FT_Long* args )
{
args[0] = ( args[0] == args[1] );
}
/**************************************************************************
*
* NEQ[]: Not EQual
* Opcode range: 0x55
* Stack: StkElt StkElt --> bool
*/
static void
Ins_NEQ( FT_Long* args )
{
args[0] = ( args[0] != args[1] );
}
/**************************************************************************
*
* ODD[]: Is ODD
* Opcode range: 0x56
* Stack: f26.6 --> bool
*/
static void
Ins_ODD( TT_ExecContext exc,
FT_Long* args )
{
args[0] = ( ( exc->func_round( exc, args[0], 3 ) & 127 ) == 64 );
}
/**************************************************************************
*
* EVEN[]: Is EVEN
* Opcode range: 0x57
* Stack: f26.6 --> bool
*/
static void
Ins_EVEN( TT_ExecContext exc,
FT_Long* args )
{
args[0] = ( ( exc->func_round( exc, args[0], 3 ) & 127 ) == 0 );
}
/**************************************************************************
*
* AND[]: logical AND
* Opcode range: 0x5A
* Stack: uint32 uint32 --> uint32
*/
static void
Ins_AND( FT_Long* args )
{
args[0] = ( args[0] && args[1] );
}
/**************************************************************************
*
* OR[]: logical OR
* Opcode range: 0x5B
* Stack: uint32 uint32 --> uint32
*/
static void
Ins_OR( FT_Long* args )
{
args[0] = ( args[0] || args[1] );
}
/**************************************************************************
*
* NOT[]: logical NOT
* Opcode range: 0x5C
* Stack: StkElt --> uint32
*/
static void
Ins_NOT( FT_Long* args )
{
args[0] = !args[0];
}
/**************************************************************************
*
* ADD[]: ADD
* Opcode range: 0x60
* Stack: f26.6 f26.6 --> f26.6
*/
static void
Ins_ADD( FT_Long* args )
{
args[0] = ADD_LONG( args[0], args[1] );
}
/**************************************************************************
*
* SUB[]: SUBtract
* Opcode range: 0x61
* Stack: f26.6 f26.6 --> f26.6
*/
static void
Ins_SUB( FT_Long* args )
{
args[0] = SUB_LONG( args[0], args[1] );
}
/**************************************************************************
*
* DIV[]: DIVide
* Opcode range: 0x62
* Stack: f26.6 f26.6 --> f26.6
*/
static void
Ins_DIV( TT_ExecContext exc,
FT_Long* args )
{
if ( args[1] == 0 )
exc->error = FT_THROW( Divide_By_Zero );
else
args[0] = FT_MulDiv_No_Round( args[0], 64L, args[1] );
}
/**************************************************************************
*
* MUL[]: MULtiply
* Opcode range: 0x63
* Stack: f26.6 f26.6 --> f26.6
*/
static void
Ins_MUL( FT_Long* args )
{
args[0] = FT_MulDiv( args[0], args[1], 64L );
}
/**************************************************************************
*
* ABS[]: ABSolute value
* Opcode range: 0x64
* Stack: f26.6 --> f26.6
*/
static void
Ins_ABS( FT_Long* args )
{
if ( args[0] < 0 )
args[0] = NEG_LONG( args[0] );
}
/**************************************************************************
*
* NEG[]: NEGate
* Opcode range: 0x65
* Stack: f26.6 --> f26.6
*/
static void
Ins_NEG( FT_Long* args )
{
args[0] = NEG_LONG( args[0] );
}
/**************************************************************************
*
* FLOOR[]: FLOOR
* Opcode range: 0x66
* Stack: f26.6 --> f26.6
*/
static void
Ins_FLOOR( FT_Long* args )
{
args[0] = FT_PIX_FLOOR( args[0] );
}
/**************************************************************************
*
* CEILING[]: CEILING
* Opcode range: 0x67
* Stack: f26.6 --> f26.6
*/
static void
Ins_CEILING( FT_Long* args )
{
args[0] = FT_PIX_CEIL_LONG( args[0] );
}
/**************************************************************************
*
* RS[]: Read Store
* Opcode range: 0x43
* Stack: uint32 --> uint32
*/
static void
Ins_RS( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong I = (FT_ULong)args[0];
if ( BOUNDSL( I, exc->storeSize ) )
{
if ( exc->pedantic_hinting )
ARRAY_BOUND_ERROR;
else
args[0] = 0;
}
else
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* subpixel hinting - avoid Typeman Dstroke and */
/* IStroke and Vacuform rounds */
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
( ( I == 24 &&
( exc->face->sph_found_func_flags &
( SPH_FDEF_SPACING_1 |
SPH_FDEF_SPACING_2 ) ) ) ||
( I == 22 &&
( exc->sph_in_func_flags &
SPH_FDEF_TYPEMAN_STROKES ) ) ||
( I == 8 &&
( exc->face->sph_found_func_flags &
SPH_FDEF_VACUFORM_ROUND_1 ) &&
exc->iup_called ) ) )
args[0] = 0;
else
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
args[0] = exc->storage[I];
}
}
/**************************************************************************
*
* WS[]: Write Store
* Opcode range: 0x42
* Stack: uint32 uint32 -->
*/
static void
Ins_WS( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong I = (FT_ULong)args[0];
if ( BOUNDSL( I, exc->storeSize ) )
{
if ( exc->pedantic_hinting )
ARRAY_BOUND_ERROR;
}
else
{
/* TT_RunIns sets origStorage and restores storage to origStorage */
/* when done. */
if ( exc->iniRange == tt_coderange_glyph &&
exc->storage == exc->origStorage )
{
FT_ULong tmp = (FT_ULong)exc->glyfStoreSize;
exc->error = Update_Max( exc->memory,
&tmp,
sizeof ( FT_Long ),
(void*)&exc->glyfStorage,
exc->storeSize );
exc->glyfStoreSize = (FT_UShort)tmp;
if ( exc->error )
return;
FT_ARRAY_COPY( exc->glyfStorage, exc->storage, exc->glyfStoreSize );
exc->storage = exc->glyfStorage;
}
exc->storage[I] = args[1];
}
}
/**************************************************************************
*
* WCVTP[]: Write CVT in Pixel units
* Opcode range: 0x44
* Stack: f26.6 uint32 -->
*/
static void
Ins_WCVTP( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong I = (FT_ULong)args[0];
if ( BOUNDSL( I, exc->cvtSize ) )
{
if ( exc->pedantic_hinting )
ARRAY_BOUND_ERROR;
}
else
exc->func_write_cvt( exc, I, args[1] );
}
/**************************************************************************
*
* WCVTF[]: Write CVT in Funits
* Opcode range: 0x70
* Stack: uint32 uint32 -->
*/
static void
Ins_WCVTF( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong I = (FT_ULong)args[0];
if ( BOUNDSL( I, exc->cvtSize ) )
{
if ( exc->pedantic_hinting )
ARRAY_BOUND_ERROR;
}
else
exc->cvt[I] = FT_MulFix( args[1], exc->tt_metrics.scale );
}
/**************************************************************************
*
* RCVT[]: Read CVT
* Opcode range: 0x45
* Stack: uint32 --> f26.6
*/
static void
Ins_RCVT( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong I = (FT_ULong)args[0];
if ( BOUNDSL( I, exc->cvtSize ) )
{
if ( exc->pedantic_hinting )
ARRAY_BOUND_ERROR;
else
args[0] = 0;
}
else
args[0] = exc->func_read_cvt( exc, I );
}
/**************************************************************************
*
* AA[]: Adjust Angle
* Opcode range: 0x7F
* Stack: uint32 -->
*/
static void
Ins_AA( void )
{
/* intentionally no longer supported */
}
/**************************************************************************
*
* DEBUG[]: DEBUG. Unsupported.
* Opcode range: 0x4F
* Stack: uint32 -->
*
* Note: The original instruction pops a value from the stack.
*/
static void
Ins_DEBUG( TT_ExecContext exc )
{
exc->error = FT_THROW( Debug_OpCode );
}
/**************************************************************************
*
* ROUND[ab]: ROUND value
* Opcode range: 0x68-0x6B
* Stack: f26.6 --> f26.6
*/
static void
Ins_ROUND( TT_ExecContext exc,
FT_Long* args )
{
args[0] = exc->func_round( exc, args[0], exc->opcode & 3 );
}
/**************************************************************************
*
* NROUND[ab]: No ROUNDing of value
* Opcode range: 0x6C-0x6F
* Stack: f26.6 --> f26.6
*/
static void
Ins_NROUND( TT_ExecContext exc,
FT_Long* args )
{
args[0] = Round_None( exc, args[0], exc->opcode & 3 );
}
/**************************************************************************
*
* MAX[]: MAXimum
* Opcode range: 0x8B
* Stack: int32? int32? --> int32
*/
static void
Ins_MAX( FT_Long* args )
{
if ( args[1] > args[0] )
args[0] = args[1];
}
/**************************************************************************
*
* MIN[]: MINimum
* Opcode range: 0x8C
* Stack: int32? int32? --> int32
*/
static void
Ins_MIN( FT_Long* args )
{
if ( args[1] < args[0] )
args[0] = args[1];
}
/**************************************************************************
*
* MINDEX[]: Move INDEXed element
* Opcode range: 0x26
* Stack: int32? --> StkElt
*/
static void
Ins_MINDEX( TT_ExecContext exc,
FT_Long* args )
{
FT_Long L, K;
L = args[0];
if ( L <= 0 || L > exc->args )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
}
else
{
K = exc->stack[exc->args - L];
FT_ARRAY_MOVE( &exc->stack[exc->args - L ],
&exc->stack[exc->args - L + 1],
( L - 1 ) );
exc->stack[exc->args - 1] = K;
}
}
/**************************************************************************
*
* CINDEX[]: Copy INDEXed element
* Opcode range: 0x25
* Stack: int32 --> StkElt
*/
static void
Ins_CINDEX( TT_ExecContext exc,
FT_Long* args )
{
FT_Long L;
L = args[0];
if ( L <= 0 || L > exc->args )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
args[0] = 0;
}
else
args[0] = exc->stack[exc->args - L];
}
/**************************************************************************
*
* ROLL[]: ROLL top three elements
* Opcode range: 0x8A
* Stack: 3 * StkElt --> 3 * StkElt
*/
static void
Ins_ROLL( FT_Long* args )
{
FT_Long A, B, C;
A = args[2];
B = args[1];
C = args[0];
args[2] = C;
args[1] = A;
args[0] = B;
}
/**************************************************************************
*
* MANAGING THE FLOW OF CONTROL
*
*/
/**************************************************************************
*
* SLOOP[]: Set LOOP variable
* Opcode range: 0x17
* Stack: int32? -->
*/
static void
Ins_SLOOP( TT_ExecContext exc,
FT_Long* args )
{
if ( args[0] < 0 )
exc->error = FT_THROW( Bad_Argument );
else
{
/* we heuristically limit the number of loops to 16 bits */
exc->GS.loop = args[0] > 0xFFFFL ? 0xFFFFL : args[0];
}
}
static FT_Bool
SkipCode( TT_ExecContext exc )
{
exc->IP += exc->length;
if ( exc->IP < exc->codeSize )
{
exc->opcode = exc->code[exc->IP];
exc->length = opcode_length[exc->opcode];
if ( exc->length < 0 )
{
if ( exc->IP + 1 >= exc->codeSize )
goto Fail_Overflow;
exc->length = 2 - exc->length * exc->code[exc->IP + 1];
}
if ( exc->IP + exc->length <= exc->codeSize )
return SUCCESS;
}
Fail_Overflow:
exc->error = FT_THROW( Code_Overflow );
return FAILURE;
}
/**************************************************************************
*
* IF[]: IF test
* Opcode range: 0x58
* Stack: StkElt -->
*/
static void
Ins_IF( TT_ExecContext exc,
FT_Long* args )
{
FT_Int nIfs;
FT_Bool Out;
if ( args[0] != 0 )
return;
nIfs = 1;
Out = 0;
do
{
if ( SkipCode( exc ) == FAILURE )
return;
switch ( exc->opcode )
{
case 0x58: /* IF */
nIfs++;
break;
case 0x1B: /* ELSE */
Out = FT_BOOL( nIfs == 1 );
break;
case 0x59: /* EIF */
nIfs--;
Out = FT_BOOL( nIfs == 0 );
break;
}
} while ( Out == 0 );
}
/**************************************************************************
*
* ELSE[]: ELSE
* Opcode range: 0x1B
* Stack: -->
*/
static void
Ins_ELSE( TT_ExecContext exc )
{
FT_Int nIfs;
nIfs = 1;
do
{
if ( SkipCode( exc ) == FAILURE )
return;
switch ( exc->opcode )
{
case 0x58: /* IF */
nIfs++;
break;
case 0x59: /* EIF */
nIfs--;
break;
}
} while ( nIfs != 0 );
}
/**************************************************************************
*
* EIF[]: End IF
* Opcode range: 0x59
* Stack: -->
*/
static void
Ins_EIF( void )
{
/* nothing to do */
}
/**************************************************************************
*
* JMPR[]: JuMP Relative
* Opcode range: 0x1C
* Stack: int32 -->
*/
static void
Ins_JMPR( TT_ExecContext exc,
FT_Long* args )
{
if ( args[0] == 0 && exc->args == 0 )
{
exc->error = FT_THROW( Bad_Argument );
return;
}
exc->IP = ADD_LONG( exc->IP, args[0] );
if ( exc->IP < 0 ||
( exc->callTop > 0 &&
exc->IP > exc->callStack[exc->callTop - 1].Def->end ) )
{
exc->error = FT_THROW( Bad_Argument );
return;
}
exc->step_ins = FALSE;
if ( args[0] < 0 )
{
if ( ++exc->neg_jump_counter > exc->neg_jump_counter_max )
exc->error = FT_THROW( Execution_Too_Long );
}
}
/**************************************************************************
*
* JROT[]: Jump Relative On True
* Opcode range: 0x78
* Stack: StkElt int32 -->
*/
static void
Ins_JROT( TT_ExecContext exc,
FT_Long* args )
{
if ( args[1] != 0 )
Ins_JMPR( exc, args );
}
/**************************************************************************
*
* JROF[]: Jump Relative On False
* Opcode range: 0x79
* Stack: StkElt int32 -->
*/
static void
Ins_JROF( TT_ExecContext exc,
FT_Long* args )
{
if ( args[1] == 0 )
Ins_JMPR( exc, args );
}
/**************************************************************************
*
* DEFINING AND USING FUNCTIONS AND INSTRUCTIONS
*
*/
/**************************************************************************
*
* FDEF[]: Function DEFinition
* Opcode range: 0x2C
* Stack: uint32 -->
*/
static void
Ins_FDEF( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong n;
TT_DefRecord* rec;
TT_DefRecord* limit;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* arguments to opcodes are skipped by `SKIP_Code' */
FT_Byte opcode_pattern[9][12] = {
/* #0 inline delta function 1 */
{
0x4B, /* PPEM */
0x53, /* GTEQ */
0x23, /* SWAP */
0x4B, /* PPEM */
0x51, /* LTEQ */
0x5A, /* AND */
0x58, /* IF */
0x38, /* SHPIX */
0x1B, /* ELSE */
0x21, /* POP */
0x21, /* POP */
0x59 /* EIF */
},
/* #1 inline delta function 2 */
{
0x4B, /* PPEM */
0x54, /* EQ */
0x58, /* IF */
0x38, /* SHPIX */
0x1B, /* ELSE */
0x21, /* POP */
0x21, /* POP */
0x59 /* EIF */
},
/* #2 diagonal stroke function */
{
0x20, /* DUP */
0x20, /* DUP */
0xB0, /* PUSHB_1 */
/* 1 */
0x60, /* ADD */
0x46, /* GC_cur */
0xB0, /* PUSHB_1 */
/* 64 */
0x23, /* SWAP */
0x42 /* WS */
},
/* #3 VacuFormRound function */
{
0x45, /* RCVT */
0x23, /* SWAP */
0x46, /* GC_cur */
0x60, /* ADD */
0x20, /* DUP */
0xB0 /* PUSHB_1 */
/* 38 */
},
/* #4 TTFautohint bytecode (old) */
{
0x20, /* DUP */
0x64, /* ABS */
0xB0, /* PUSHB_1 */
/* 32 */
0x60, /* ADD */
0x66, /* FLOOR */
0x23, /* SWAP */
0xB0 /* PUSHB_1 */
},
/* #5 spacing function 1 */
{
0x01, /* SVTCA_x */
0xB0, /* PUSHB_1 */
/* 24 */
0x43, /* RS */
0x58 /* IF */
},
/* #6 spacing function 2 */
{
0x01, /* SVTCA_x */
0x18, /* RTG */
0xB0, /* PUSHB_1 */
/* 24 */
0x43, /* RS */
0x58 /* IF */
},
/* #7 TypeMan Talk DiagEndCtrl function */
{
0x01, /* SVTCA_x */
0x20, /* DUP */
0xB0, /* PUSHB_1 */
/* 3 */
0x25, /* CINDEX */
},
/* #8 TypeMan Talk Align */
{
0x06, /* SPVTL */
0x7D, /* RDTG */
},
};
FT_UShort opcode_patterns = 9;
FT_UShort opcode_pointer[9] = { 0, 0, 0, 0, 0, 0, 0, 0, 0 };
FT_UShort opcode_size[9] = { 12, 8, 8, 6, 7, 4, 5, 4, 2 };
FT_UShort i;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
/* FDEF is only allowed in `prep' or `fpgm' */
if ( exc->iniRange == tt_coderange_glyph )
{
exc->error = FT_THROW( DEF_In_Glyf_Bytecode );
return;
}
/* some font programs are broken enough to redefine functions! */
/* We will then parse the current table. */
rec = exc->FDefs;
limit = FT_OFFSET( rec, exc->numFDefs );
n = (FT_ULong)args[0];
for ( ; rec < limit; rec++ )
{
if ( rec->opc == n )
break;
}
if ( rec == limit )
{
/* check that there is enough room for new functions */
if ( exc->numFDefs >= exc->maxFDefs )
{
exc->error = FT_THROW( Too_Many_Function_Defs );
return;
}
exc->numFDefs++;
}
/* Although FDEF takes unsigned 32-bit integer, */
/* func # must be within unsigned 16-bit integer */
if ( n > 0xFFFFU )
{
exc->error = FT_THROW( Too_Many_Function_Defs );
return;
}
rec->range = exc->curRange;
rec->opc = (FT_UInt16)n;
rec->start = exc->IP + 1;
rec->active = TRUE;
rec->inline_delta = FALSE;
rec->sph_fdef_flags = 0x0000;
if ( n > exc->maxFunc )
exc->maxFunc = (FT_UInt16)n;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* We don't know for sure these are typeman functions, */
/* however they are only active when RS 22 is called */
if ( n >= 64 && n <= 66 )
rec->sph_fdef_flags |= SPH_FDEF_TYPEMAN_STROKES;
#endif
/* Now skip the whole function definition. */
/* We don't allow nested IDEFS & FDEFs. */
while ( SkipCode( exc ) == SUCCESS )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY )
{
for ( i = 0; i < opcode_patterns; i++ )
{
if ( opcode_pointer[i] < opcode_size[i] &&
exc->opcode == opcode_pattern[i][opcode_pointer[i]] )
{
opcode_pointer[i] += 1;
if ( opcode_pointer[i] == opcode_size[i] )
{
FT_TRACE6(( "sph: Function %d, opcode ptrn: %ld, %s %s\n",
i, n,
exc->face->root.family_name,
exc->face->root.style_name ));
switch ( i )
{
case 0:
rec->sph_fdef_flags |= SPH_FDEF_INLINE_DELTA_1;
exc->face->sph_found_func_flags |= SPH_FDEF_INLINE_DELTA_1;
break;
case 1:
rec->sph_fdef_flags |= SPH_FDEF_INLINE_DELTA_2;
exc->face->sph_found_func_flags |= SPH_FDEF_INLINE_DELTA_2;
break;
case 2:
switch ( n )
{
/* needs to be implemented still */
case 58:
rec->sph_fdef_flags |= SPH_FDEF_DIAGONAL_STROKE;
exc->face->sph_found_func_flags |= SPH_FDEF_DIAGONAL_STROKE;
}
break;
case 3:
switch ( n )
{
case 0:
rec->sph_fdef_flags |= SPH_FDEF_VACUFORM_ROUND_1;
exc->face->sph_found_func_flags |= SPH_FDEF_VACUFORM_ROUND_1;
}
break;
case 4:
/* probably not necessary to detect anymore */
rec->sph_fdef_flags |= SPH_FDEF_TTFAUTOHINT_1;
exc->face->sph_found_func_flags |= SPH_FDEF_TTFAUTOHINT_1;
break;
case 5:
switch ( n )
{
case 0:
case 1:
case 2:
case 4:
case 7:
case 8:
rec->sph_fdef_flags |= SPH_FDEF_SPACING_1;
exc->face->sph_found_func_flags |= SPH_FDEF_SPACING_1;
}
break;
case 6:
switch ( n )
{
case 0:
case 1:
case 2:
case 4:
case 7:
case 8:
rec->sph_fdef_flags |= SPH_FDEF_SPACING_2;
exc->face->sph_found_func_flags |= SPH_FDEF_SPACING_2;
}
break;
case 7:
rec->sph_fdef_flags |= SPH_FDEF_TYPEMAN_DIAGENDCTRL;
exc->face->sph_found_func_flags |= SPH_FDEF_TYPEMAN_DIAGENDCTRL;
break;
case 8:
#if 0
rec->sph_fdef_flags |= SPH_FDEF_TYPEMAN_DIAGENDCTRL;
exc->face->sph_found_func_flags |= SPH_FDEF_TYPEMAN_DIAGENDCTRL;
#endif
break;
}
opcode_pointer[i] = 0;
}
}
else
opcode_pointer[i] = 0;
}
/* Set sph_compatibility_mode only when deltas are detected */
exc->face->sph_compatibility_mode =
( ( exc->face->sph_found_func_flags & SPH_FDEF_INLINE_DELTA_1 ) |
( exc->face->sph_found_func_flags & SPH_FDEF_INLINE_DELTA_2 ) );
}
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
switch ( exc->opcode )
{
case 0x89: /* IDEF */
case 0x2C: /* FDEF */
exc->error = FT_THROW( Nested_DEFS );
return;
case 0x2D: /* ENDF */
rec->end = exc->IP;
return;
}
}
}
/**************************************************************************
*
* ENDF[]: END Function definition
* Opcode range: 0x2D
* Stack: -->
*/
static void
Ins_ENDF( TT_ExecContext exc )
{
TT_CallRec* pRec;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
exc->sph_in_func_flags = 0x0000;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
if ( exc->callTop <= 0 ) /* We encountered an ENDF without a call */
{
exc->error = FT_THROW( ENDF_In_Exec_Stream );
return;
}
exc->callTop--;
pRec = &exc->callStack[exc->callTop];
pRec->Cur_Count--;
exc->step_ins = FALSE;
if ( pRec->Cur_Count > 0 )
{
exc->callTop++;
exc->IP = pRec->Def->start;
}
else
/* Loop through the current function */
Ins_Goto_CodeRange( exc, pRec->Caller_Range, pRec->Caller_IP );
/* Exit the current call frame. */
/* NOTE: If the last instruction of a program is a */
/* CALL or LOOPCALL, the return address is */
/* always out of the code range. This is a */
/* valid address, and it is why we do not test */
/* the result of Ins_Goto_CodeRange() here! */
}
/**************************************************************************
*
* CALL[]: CALL function
* Opcode range: 0x2B
* Stack: uint32? -->
*/
static void
Ins_CALL( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong F;
TT_CallRec* pCrec;
TT_DefRecord* def;
/* first of all, check the index */
F = (FT_ULong)args[0];
if ( BOUNDSL( F, exc->maxFunc + 1 ) )
goto Fail;
if ( !exc->FDefs )
goto Fail;
/* Except for some old Apple fonts, all functions in a TrueType */
/* font are defined in increasing order, starting from 0. This */
/* means that we normally have */
/* */
/* exc->maxFunc+1 == exc->numFDefs */
/* exc->FDefs[n].opc == n for n in 0..exc->maxFunc */
/* */
/* If this isn't true, we need to look up the function table. */
def = exc->FDefs + F;
if ( exc->maxFunc + 1 != exc->numFDefs || def->opc != F )
{
/* look up the FDefs table */
TT_DefRecord* limit;
def = exc->FDefs;
limit = def + exc->numFDefs;
while ( def < limit && def->opc != F )
def++;
if ( def == limit )
goto Fail;
}
/* check that the function is active */
if ( !def->active )
goto Fail;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
( ( exc->iup_called &&
( exc->sph_tweak_flags & SPH_TWEAK_NO_CALL_AFTER_IUP ) ) ||
( def->sph_fdef_flags & SPH_FDEF_VACUFORM_ROUND_1 ) ) )
goto Fail;
else
exc->sph_in_func_flags = def->sph_fdef_flags;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
/* check the call stack */
if ( exc->callTop >= exc->callSize )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
pCrec = exc->callStack + exc->callTop;
pCrec->Caller_Range = exc->curRange;
pCrec->Caller_IP = exc->IP + 1;
pCrec->Cur_Count = 1;
pCrec->Def = def;
exc->callTop++;
Ins_Goto_CodeRange( exc, def->range, def->start );
exc->step_ins = FALSE;
return;
Fail:
exc->error = FT_THROW( Invalid_Reference );
}
/**************************************************************************
*
* LOOPCALL[]: LOOP and CALL function
* Opcode range: 0x2A
* Stack: uint32? Eint16? -->
*/
static void
Ins_LOOPCALL( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong F;
TT_CallRec* pCrec;
TT_DefRecord* def;
/* first of all, check the index */
F = (FT_ULong)args[1];
if ( BOUNDSL( F, exc->maxFunc + 1 ) )
goto Fail;
/* Except for some old Apple fonts, all functions in a TrueType */
/* font are defined in increasing order, starting from 0. This */
/* means that we normally have */
/* */
/* exc->maxFunc+1 == exc->numFDefs */
/* exc->FDefs[n].opc == n for n in 0..exc->maxFunc */
/* */
/* If this isn't true, we need to look up the function table. */
def = FT_OFFSET( exc->FDefs, F );
if ( exc->maxFunc + 1 != exc->numFDefs || def->opc != F )
{
/* look up the FDefs table */
TT_DefRecord* limit;
def = exc->FDefs;
limit = FT_OFFSET( def, exc->numFDefs );
while ( def < limit && def->opc != F )
def++;
if ( def == limit )
goto Fail;
}
/* check that the function is active */
if ( !def->active )
goto Fail;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
( def->sph_fdef_flags & SPH_FDEF_VACUFORM_ROUND_1 ) )
goto Fail;
else
exc->sph_in_func_flags = def->sph_fdef_flags;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
/* check stack */
if ( exc->callTop >= exc->callSize )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
if ( args[0] > 0 )
{
pCrec = exc->callStack + exc->callTop;
pCrec->Caller_Range = exc->curRange;
pCrec->Caller_IP = exc->IP + 1;
pCrec->Cur_Count = (FT_Int)args[0];
pCrec->Def = def;
exc->callTop++;
Ins_Goto_CodeRange( exc, def->range, def->start );
exc->step_ins = FALSE;
exc->loopcall_counter += (FT_ULong)args[0];
if ( exc->loopcall_counter > exc->loopcall_counter_max )
exc->error = FT_THROW( Execution_Too_Long );
}
return;
Fail:
exc->error = FT_THROW( Invalid_Reference );
}
/**************************************************************************
*
* IDEF[]: Instruction DEFinition
* Opcode range: 0x89
* Stack: Eint8 -->
*/
static void
Ins_IDEF( TT_ExecContext exc,
FT_Long* args )
{
TT_DefRecord* def;
TT_DefRecord* limit;
/* we enable IDEF only in `prep' or `fpgm' */
if ( exc->iniRange == tt_coderange_glyph )
{
exc->error = FT_THROW( DEF_In_Glyf_Bytecode );
return;
}
/* First of all, look for the same function in our table */
def = exc->IDefs;
limit = FT_OFFSET( def, exc->numIDefs );
for ( ; def < limit; def++ )
if ( def->opc == (FT_ULong)args[0] )
break;
if ( def == limit )
{
/* check that there is enough room for a new instruction */
if ( exc->numIDefs >= exc->maxIDefs )
{
exc->error = FT_THROW( Too_Many_Instruction_Defs );
return;
}
exc->numIDefs++;
}
/* opcode must be unsigned 8-bit integer */
if ( 0 > args[0] || args[0] > 0x00FF )
{
exc->error = FT_THROW( Too_Many_Instruction_Defs );
return;
}
def->opc = (FT_Byte)args[0];
def->start = exc->IP + 1;
def->range = exc->curRange;
def->active = TRUE;
if ( (FT_ULong)args[0] > exc->maxIns )
exc->maxIns = (FT_Byte)args[0];
/* Now skip the whole function definition. */
/* We don't allow nested IDEFs & FDEFs. */
while ( SkipCode( exc ) == SUCCESS )
{
switch ( exc->opcode )
{
case 0x89: /* IDEF */
case 0x2C: /* FDEF */
exc->error = FT_THROW( Nested_DEFS );
return;
case 0x2D: /* ENDF */
def->end = exc->IP;
return;
}
}
}
/**************************************************************************
*
* PUSHING DATA ONTO THE INTERPRETER STACK
*
*/
/**************************************************************************
*
* NPUSHB[]: PUSH N Bytes
* Opcode range: 0x40
* Stack: --> uint32...
*/
static void
Ins_NPUSHB( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort L, K;
L = (FT_UShort)exc->code[exc->IP + 1];
if ( BOUNDS( L, exc->stackSize + 1 - exc->top ) )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
for ( K = 1; K <= L; K++ )
args[K - 1] = exc->code[exc->IP + K + 1];
exc->new_top += L;
}
/**************************************************************************
*
* NPUSHW[]: PUSH N Words
* Opcode range: 0x41
* Stack: --> int32...
*/
static void
Ins_NPUSHW( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort L, K;
L = (FT_UShort)exc->code[exc->IP + 1];
if ( BOUNDS( L, exc->stackSize + 1 - exc->top ) )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
exc->IP += 2;
for ( K = 0; K < L; K++ )
args[K] = GetShortIns( exc );
exc->step_ins = FALSE;
exc->new_top += L;
}
/**************************************************************************
*
* PUSHB[abc]: PUSH Bytes
* Opcode range: 0xB0-0xB7
* Stack: --> uint32...
*/
static void
Ins_PUSHB( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort L, K;
L = (FT_UShort)( exc->opcode - 0xB0 + 1 );
if ( BOUNDS( L, exc->stackSize + 1 - exc->top ) )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
for ( K = 1; K <= L; K++ )
args[K - 1] = exc->code[exc->IP + K];
}
/**************************************************************************
*
* PUSHW[abc]: PUSH Words
* Opcode range: 0xB8-0xBF
* Stack: --> int32...
*/
static void
Ins_PUSHW( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort L, K;
L = (FT_UShort)( exc->opcode - 0xB8 + 1 );
if ( BOUNDS( L, exc->stackSize + 1 - exc->top ) )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
exc->IP++;
for ( K = 0; K < L; K++ )
args[K] = GetShortIns( exc );
exc->step_ins = FALSE;
}
/**************************************************************************
*
* MANAGING THE GRAPHICS STATE
*
*/
static FT_Bool
Ins_SxVTL( TT_ExecContext exc,
FT_UShort aIdx1,
FT_UShort aIdx2,
FT_UnitVector* Vec )
{
FT_Long A, B, C;
FT_Vector* p1;
FT_Vector* p2;
FT_Byte opcode = exc->opcode;
if ( BOUNDS( aIdx1, exc->zp2.n_points ) ||
BOUNDS( aIdx2, exc->zp1.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return FAILURE;
}
p1 = exc->zp1.cur + aIdx2;
p2 = exc->zp2.cur + aIdx1;
A = SUB_LONG( p1->x, p2->x );
B = SUB_LONG( p1->y, p2->y );
/* If p1 == p2, SPvTL and SFvTL behave the same as */
/* SPvTCA[X] and SFvTCA[X], respectively. */
/* */
/* Confirmed by Greg Hitchcock. */
if ( A == 0 && B == 0 )
{
A = 0x4000;
opcode = 0;
}
if ( ( opcode & 1 ) != 0 )
{
C = B; /* counter-clockwise rotation */
B = A;
A = NEG_LONG( C );
}
Normalize( A, B, Vec );
return SUCCESS;
}
/**************************************************************************
*
* SVTCA[a]: Set (F and P) Vectors to Coordinate Axis
* Opcode range: 0x00-0x01
* Stack: -->
*
* SPvTCA[a]: Set PVector to Coordinate Axis
* Opcode range: 0x02-0x03
* Stack: -->
*
* SFvTCA[a]: Set FVector to Coordinate Axis
* Opcode range: 0x04-0x05
* Stack: -->
*/
static void
Ins_SxyTCA( TT_ExecContext exc )
{
FT_Short AA, BB;
FT_Byte opcode = exc->opcode;
AA = (FT_Short)( ( opcode & 1 ) << 14 );
BB = (FT_Short)( AA ^ 0x4000 );
if ( opcode < 4 )
{
exc->GS.projVector.x = AA;
exc->GS.projVector.y = BB;
exc->GS.dualVector.x = AA;
exc->GS.dualVector.y = BB;
}
if ( ( opcode & 2 ) == 0 )
{
exc->GS.freeVector.x = AA;
exc->GS.freeVector.y = BB;
}
Compute_Funcs( exc );
}
/**************************************************************************
*
* SPvTL[a]: Set PVector To Line
* Opcode range: 0x06-0x07
* Stack: uint32 uint32 -->
*/
static void
Ins_SPVTL( TT_ExecContext exc,
FT_Long* args )
{
if ( Ins_SxVTL( exc,
(FT_UShort)args[1],
(FT_UShort)args[0],
&exc->GS.projVector ) == SUCCESS )
{
exc->GS.dualVector = exc->GS.projVector;
Compute_Funcs( exc );
}
}
/**************************************************************************
*
* SFvTL[a]: Set FVector To Line
* Opcode range: 0x08-0x09
* Stack: uint32 uint32 -->
*/
static void
Ins_SFVTL( TT_ExecContext exc,
FT_Long* args )
{
if ( Ins_SxVTL( exc,
(FT_UShort)args[1],
(FT_UShort)args[0],
&exc->GS.freeVector ) == SUCCESS )
{
Compute_Funcs( exc );
}
}
/**************************************************************************
*
* SFvTPv[]: Set FVector To PVector
* Opcode range: 0x0E
* Stack: -->
*/
static void
Ins_SFVTPV( TT_ExecContext exc )
{
exc->GS.freeVector = exc->GS.projVector;
Compute_Funcs( exc );
}
/**************************************************************************
*
* SPvFS[]: Set PVector From Stack
* Opcode range: 0x0A
* Stack: f2.14 f2.14 -->
*/
static void
Ins_SPVFS( TT_ExecContext exc,
FT_Long* args )
{
FT_Short S;
FT_Long X, Y;
/* Only use low 16bits, then sign extend */
S = (FT_Short)args[1];
Y = (FT_Long)S;
S = (FT_Short)args[0];
X = (FT_Long)S;
Normalize( X, Y, &exc->GS.projVector );
exc->GS.dualVector = exc->GS.projVector;
Compute_Funcs( exc );
}
/**************************************************************************
*
* SFvFS[]: Set FVector From Stack
* Opcode range: 0x0B
* Stack: f2.14 f2.14 -->
*/
static void
Ins_SFVFS( TT_ExecContext exc,
FT_Long* args )
{
FT_Short S;
FT_Long X, Y;
/* Only use low 16bits, then sign extend */
S = (FT_Short)args[1];
Y = (FT_Long)S;
S = (FT_Short)args[0];
X = S;
Normalize( X, Y, &exc->GS.freeVector );
Compute_Funcs( exc );
}
/**************************************************************************
*
* GPv[]: Get Projection Vector
* Opcode range: 0x0C
* Stack: ef2.14 --> ef2.14
*/
static void
Ins_GPV( TT_ExecContext exc,
FT_Long* args )
{
args[0] = exc->GS.projVector.x;
args[1] = exc->GS.projVector.y;
}
/**************************************************************************
*
* GFv[]: Get Freedom Vector
* Opcode range: 0x0D
* Stack: ef2.14 --> ef2.14
*/
static void
Ins_GFV( TT_ExecContext exc,
FT_Long* args )
{
args[0] = exc->GS.freeVector.x;
args[1] = exc->GS.freeVector.y;
}
/**************************************************************************
*
* SRP0[]: Set Reference Point 0
* Opcode range: 0x10
* Stack: uint32 -->
*/
static void
Ins_SRP0( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.rp0 = (FT_UShort)args[0];
}
/**************************************************************************
*
* SRP1[]: Set Reference Point 1
* Opcode range: 0x11
* Stack: uint32 -->
*/
static void
Ins_SRP1( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.rp1 = (FT_UShort)args[0];
}
/**************************************************************************
*
* SRP2[]: Set Reference Point 2
* Opcode range: 0x12
* Stack: uint32 -->
*/
static void
Ins_SRP2( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.rp2 = (FT_UShort)args[0];
}
/**************************************************************************
*
* SMD[]: Set Minimum Distance
* Opcode range: 0x1A
* Stack: f26.6 -->
*/
static void
Ins_SMD( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.minimum_distance = args[0];
}
/**************************************************************************
*
* SCVTCI[]: Set Control Value Table Cut In
* Opcode range: 0x1D
* Stack: f26.6 -->
*/
static void
Ins_SCVTCI( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.control_value_cutin = (FT_F26Dot6)args[0];
}
/**************************************************************************
*
* SSWCI[]: Set Single Width Cut In
* Opcode range: 0x1E
* Stack: f26.6 -->
*/
static void
Ins_SSWCI( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.single_width_cutin = (FT_F26Dot6)args[0];
}
/**************************************************************************
*
* SSW[]: Set Single Width
* Opcode range: 0x1F
* Stack: int32? -->
*/
static void
Ins_SSW( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.single_width_value = FT_MulFix( args[0],
exc->tt_metrics.scale );
}
/**************************************************************************
*
* FLIPON[]: Set auto-FLIP to ON
* Opcode range: 0x4D
* Stack: -->
*/
static void
Ins_FLIPON( TT_ExecContext exc )
{
exc->GS.auto_flip = TRUE;
}
/**************************************************************************
*
* FLIPOFF[]: Set auto-FLIP to OFF
* Opcode range: 0x4E
* Stack: -->
*/
static void
Ins_FLIPOFF( TT_ExecContext exc )
{
exc->GS.auto_flip = FALSE;
}
/**************************************************************************
*
* SANGW[]: Set ANGle Weight
* Opcode range: 0x7E
* Stack: uint32 -->
*/
static void
Ins_SANGW( void )
{
/* instruction not supported anymore */
}
/**************************************************************************
*
* SDB[]: Set Delta Base
* Opcode range: 0x5E
* Stack: uint32 -->
*/
static void
Ins_SDB( TT_ExecContext exc,
FT_Long* args )
{
exc->GS.delta_base = (FT_UShort)args[0];
}
/**************************************************************************
*
* SDS[]: Set Delta Shift
* Opcode range: 0x5F
* Stack: uint32 -->
*/
static void
Ins_SDS( TT_ExecContext exc,
FT_Long* args )
{
if ( (FT_ULong)args[0] > 6UL )
exc->error = FT_THROW( Bad_Argument );
else
exc->GS.delta_shift = (FT_UShort)args[0];
}
/**************************************************************************
*
* RTHG[]: Round To Half Grid
* Opcode range: 0x19
* Stack: -->
*/
static void
Ins_RTHG( TT_ExecContext exc )
{
exc->GS.round_state = TT_Round_To_Half_Grid;
exc->func_round = (TT_Round_Func)Round_To_Half_Grid;
}
/**************************************************************************
*
* RTG[]: Round To Grid
* Opcode range: 0x18
* Stack: -->
*/
static void
Ins_RTG( TT_ExecContext exc )
{
exc->GS.round_state = TT_Round_To_Grid;
exc->func_round = (TT_Round_Func)Round_To_Grid;
}
/**************************************************************************
* RTDG[]: Round To Double Grid
* Opcode range: 0x3D
* Stack: -->
*/
static void
Ins_RTDG( TT_ExecContext exc )
{
exc->GS.round_state = TT_Round_To_Double_Grid;
exc->func_round = (TT_Round_Func)Round_To_Double_Grid;
}
/**************************************************************************
* RUTG[]: Round Up To Grid
* Opcode range: 0x7C
* Stack: -->
*/
static void
Ins_RUTG( TT_ExecContext exc )
{
exc->GS.round_state = TT_Round_Up_To_Grid;
exc->func_round = (TT_Round_Func)Round_Up_To_Grid;
}
/**************************************************************************
*
* RDTG[]: Round Down To Grid
* Opcode range: 0x7D
* Stack: -->
*/
static void
Ins_RDTG( TT_ExecContext exc )
{
exc->GS.round_state = TT_Round_Down_To_Grid;
exc->func_round = (TT_Round_Func)Round_Down_To_Grid;
}
/**************************************************************************
*
* ROFF[]: Round OFF
* Opcode range: 0x7A
* Stack: -->
*/
static void
Ins_ROFF( TT_ExecContext exc )
{
exc->GS.round_state = TT_Round_Off;
exc->func_round = (TT_Round_Func)Round_None;
}
/**************************************************************************
*
* SROUND[]: Super ROUND
* Opcode range: 0x76
* Stack: Eint8 -->
*/
static void
Ins_SROUND( TT_ExecContext exc,
FT_Long* args )
{
SetSuperRound( exc, 0x4000, args[0] );
exc->GS.round_state = TT_Round_Super;
exc->func_round = (TT_Round_Func)Round_Super;
}
/**************************************************************************
*
* S45ROUND[]: Super ROUND 45 degrees
* Opcode range: 0x77
* Stack: uint32 -->
*/
static void
Ins_S45ROUND( TT_ExecContext exc,
FT_Long* args )
{
SetSuperRound( exc, 0x2D41, args[0] );
exc->GS.round_state = TT_Round_Super_45;
exc->func_round = (TT_Round_Func)Round_Super_45;
}
/**************************************************************************
*
* GC[a]: Get Coordinate projected onto
* Opcode range: 0x46-0x47
* Stack: uint32 --> f26.6
*
* XXX: UNDOCUMENTED: Measures from the original glyph must be taken
* along the dual projection vector!
*/
static void
Ins_GC( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong L;
FT_F26Dot6 R;
L = (FT_ULong)args[0];
if ( BOUNDSL( L, exc->zp2.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
R = 0;
}
else
{
if ( exc->opcode & 1 )
R = FAST_DUALPROJ( &exc->zp2.org[L] );
else
R = FAST_PROJECT( &exc->zp2.cur[L] );
}
args[0] = R;
}
/**************************************************************************
*
* SCFS[]: Set Coordinate From Stack
* Opcode range: 0x48
* Stack: f26.6 uint32 -->
*
* Formula:
*
* OA := OA + ( value - OA.p )/( f.p ) * f
*/
static void
Ins_SCFS( TT_ExecContext exc,
FT_Long* args )
{
FT_Long K;
FT_UShort L;
L = (FT_UShort)args[0];
if ( BOUNDS( L, exc->zp2.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
K = FAST_PROJECT( &exc->zp2.cur[L] );
exc->func_move( exc, &exc->zp2, L, SUB_LONG( args[1], K ) );
/* UNDOCUMENTED! The MS rasterizer does that with */
/* twilight points (confirmed by Greg Hitchcock) */
if ( exc->GS.gep2 == 0 )
exc->zp2.org[L] = exc->zp2.cur[L];
}
/**************************************************************************
*
* MD[a]: Measure Distance
* Opcode range: 0x49-0x4A
* Stack: uint32 uint32 --> f26.6
*
* XXX: UNDOCUMENTED: Measure taken in the original glyph must be along
* the dual projection vector.
*
* XXX: UNDOCUMENTED: Flag attributes are inverted!
* 0 => measure distance in original outline
* 1 => measure distance in grid-fitted outline
*
* XXX: UNDOCUMENTED: `zp0 - zp1', and not `zp2 - zp1!
*/
static void
Ins_MD( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort K, L;
FT_F26Dot6 D;
K = (FT_UShort)args[1];
L = (FT_UShort)args[0];
if ( BOUNDS( L, exc->zp0.n_points ) ||
BOUNDS( K, exc->zp1.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
D = 0;
}
else
{
if ( exc->opcode & 1 )
D = PROJECT( exc->zp0.cur + L, exc->zp1.cur + K );
else
{
/* XXX: UNDOCUMENTED: twilight zone special case */
if ( exc->GS.gep0 == 0 || exc->GS.gep1 == 0 )
{
FT_Vector* vec1 = exc->zp0.org + L;
FT_Vector* vec2 = exc->zp1.org + K;
D = DUALPROJ( vec1, vec2 );
}
else
{
FT_Vector* vec1 = exc->zp0.orus + L;
FT_Vector* vec2 = exc->zp1.orus + K;
if ( exc->metrics.x_scale == exc->metrics.y_scale )
{
/* this should be faster */
D = DUALPROJ( vec1, vec2 );
D = FT_MulFix( D, exc->metrics.x_scale );
}
else
{
FT_Vector vec;
vec.x = FT_MulFix( vec1->x - vec2->x, exc->metrics.x_scale );
vec.y = FT_MulFix( vec1->y - vec2->y, exc->metrics.y_scale );
D = FAST_DUALPROJ( &vec );
}
}
}
}
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* Disable Type 2 Vacuform Rounds - e.g. Arial Narrow */
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
( D < 0 ? NEG_LONG( D ) : D ) == 64 )
D += 1;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
args[0] = D;
}
/**************************************************************************
*
* SDPvTL[a]: Set Dual PVector to Line
* Opcode range: 0x86-0x87
* Stack: uint32 uint32 -->
*/
static void
Ins_SDPVTL( TT_ExecContext exc,
FT_Long* args )
{
FT_Long A, B, C;
FT_UShort p1, p2; /* was FT_Int in pas type ERROR */
FT_Byte opcode = exc->opcode;
p1 = (FT_UShort)args[1];
p2 = (FT_UShort)args[0];
if ( BOUNDS( p2, exc->zp1.n_points ) ||
BOUNDS( p1, exc->zp2.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
{
FT_Vector* v1 = exc->zp1.org + p2;
FT_Vector* v2 = exc->zp2.org + p1;
A = SUB_LONG( v1->x, v2->x );
B = SUB_LONG( v1->y, v2->y );
/* If v1 == v2, SDPvTL behaves the same as */
/* SVTCA[X], respectively. */
/* */
/* Confirmed by Greg Hitchcock. */
if ( A == 0 && B == 0 )
{
A = 0x4000;
opcode = 0;
}
}
if ( ( opcode & 1 ) != 0 )
{
C = B; /* counter-clockwise rotation */
B = A;
A = NEG_LONG( C );
}
Normalize( A, B, &exc->GS.dualVector );
{
FT_Vector* v1 = exc->zp1.cur + p2;
FT_Vector* v2 = exc->zp2.cur + p1;
A = SUB_LONG( v1->x, v2->x );
B = SUB_LONG( v1->y, v2->y );
if ( A == 0 && B == 0 )
{
A = 0x4000;
opcode = 0;
}
}
if ( ( opcode & 1 ) != 0 )
{
C = B; /* counter-clockwise rotation */
B = A;
A = NEG_LONG( C );
}
Normalize( A, B, &exc->GS.projVector );
Compute_Funcs( exc );
}
/**************************************************************************
*
* SZP0[]: Set Zone Pointer 0
* Opcode range: 0x13
* Stack: uint32 -->
*/
static void
Ins_SZP0( TT_ExecContext exc,
FT_Long* args )
{
switch ( (FT_Int)args[0] )
{
case 0:
exc->zp0 = exc->twilight;
break;
case 1:
exc->zp0 = exc->pts;
break;
default:
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
exc->GS.gep0 = (FT_UShort)args[0];
}
/**************************************************************************
*
* SZP1[]: Set Zone Pointer 1
* Opcode range: 0x14
* Stack: uint32 -->
*/
static void
Ins_SZP1( TT_ExecContext exc,
FT_Long* args )
{
switch ( (FT_Int)args[0] )
{
case 0:
exc->zp1 = exc->twilight;
break;
case 1:
exc->zp1 = exc->pts;
break;
default:
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
exc->GS.gep1 = (FT_UShort)args[0];
}
/**************************************************************************
*
* SZP2[]: Set Zone Pointer 2
* Opcode range: 0x15
* Stack: uint32 -->
*/
static void
Ins_SZP2( TT_ExecContext exc,
FT_Long* args )
{
switch ( (FT_Int)args[0] )
{
case 0:
exc->zp2 = exc->twilight;
break;
case 1:
exc->zp2 = exc->pts;
break;
default:
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
exc->GS.gep2 = (FT_UShort)args[0];
}
/**************************************************************************
*
* SZPS[]: Set Zone PointerS
* Opcode range: 0x16
* Stack: uint32 -->
*/
static void
Ins_SZPS( TT_ExecContext exc,
FT_Long* args )
{
switch ( (FT_Int)args[0] )
{
case 0:
exc->zp0 = exc->twilight;
break;
case 1:
exc->zp0 = exc->pts;
break;
default:
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
exc->zp1 = exc->zp0;
exc->zp2 = exc->zp0;
exc->GS.gep0 = (FT_UShort)args[0];
exc->GS.gep1 = (FT_UShort)args[0];
exc->GS.gep2 = (FT_UShort)args[0];
}
/**************************************************************************
*
* INSTCTRL[]: INSTruction ConTRoL
* Opcode range: 0x8E
* Stack: int32 int32 -->
*/
static void
Ins_INSTCTRL( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong K, L, Kf;
K = (FT_ULong)args[1];
L = (FT_ULong)args[0];
/* selector values cannot be `OR'ed; */
/* they are indices starting with index 1, not flags */
if ( K < 1 || K > 3 )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
/* convert index to flag value */
Kf = 1 << ( K - 1 );
if ( L != 0 )
{
/* arguments to selectors look like flag values */
if ( L != Kf )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
}
/* INSTCTRL should only be used in the CVT program */
if ( exc->iniRange == tt_coderange_cvt )
{
exc->GS.instruct_control &= ~(FT_Byte)Kf;
exc->GS.instruct_control |= (FT_Byte)L;
}
/* except to change the subpixel flags temporarily */
else if ( exc->iniRange == tt_coderange_glyph && K == 3 )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* INSTCTRL modifying flag 3 also has an effect */
/* outside of the CVT program */
if ( SUBPIXEL_HINTING_INFINALITY )
exc->ignore_x_mode = !FT_BOOL( L == 4 );
#endif
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* Native ClearType fonts sign a waiver that turns off all backward */
/* compatibility hacks and lets them program points to the grid like */
/* it's 1996. They might sign a waiver for just one glyph, though. */
if ( SUBPIXEL_HINTING_MINIMAL )
exc->backward_compatibility = !FT_BOOL( L == 4 );
#endif
}
else if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
}
/**************************************************************************
*
* SCANCTRL[]: SCAN ConTRoL
* Opcode range: 0x85
* Stack: uint32? -->
*/
static void
Ins_SCANCTRL( TT_ExecContext exc,
FT_Long* args )
{
FT_Int A;
/* Get Threshold */
A = (FT_Int)( args[0] & 0xFF );
if ( A == 0xFF )
{
exc->GS.scan_control = TRUE;
return;
}
else if ( A == 0 )
{
exc->GS.scan_control = FALSE;
return;
}
if ( ( args[0] & 0x100 ) != 0 && exc->tt_metrics.ppem <= A )
exc->GS.scan_control = TRUE;
if ( ( args[0] & 0x200 ) != 0 && exc->tt_metrics.rotated )
exc->GS.scan_control = TRUE;
if ( ( args[0] & 0x400 ) != 0 && exc->tt_metrics.stretched )
exc->GS.scan_control = TRUE;
if ( ( args[0] & 0x800 ) != 0 && exc->tt_metrics.ppem > A )
exc->GS.scan_control = FALSE;
if ( ( args[0] & 0x1000 ) != 0 && exc->tt_metrics.rotated )
exc->GS.scan_control = FALSE;
if ( ( args[0] & 0x2000 ) != 0 && exc->tt_metrics.stretched )
exc->GS.scan_control = FALSE;
}
/**************************************************************************
*
* SCANTYPE[]: SCAN TYPE
* Opcode range: 0x8D
* Stack: uint16 -->
*/
static void
Ins_SCANTYPE( TT_ExecContext exc,
FT_Long* args )
{
if ( args[0] >= 0 )
exc->GS.scan_type = (FT_Int)args[0] & 0xFFFF;
}
/**************************************************************************
*
* MANAGING OUTLINES
*
*/
/**************************************************************************
*
* FLIPPT[]: FLIP PoinT
* Opcode range: 0x80
* Stack: uint32... -->
*/
static void
Ins_FLIPPT( TT_ExecContext exc )
{
FT_UShort point;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* See `ttinterp.h' for details on backward compatibility mode. */
if ( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility &&
exc->iupx_called &&
exc->iupy_called )
goto Fail;
#endif
if ( exc->top < exc->GS.loop )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Too_Few_Arguments );
goto Fail;
}
while ( exc->GS.loop > 0 )
{
exc->args--;
point = (FT_UShort)exc->stack[exc->args];
if ( BOUNDS( point, exc->pts.n_points ) )
{
if ( exc->pedantic_hinting )
{
exc->error = FT_THROW( Invalid_Reference );
return;
}
}
else
exc->pts.tags[point] ^= FT_CURVE_TAG_ON;
exc->GS.loop--;
}
Fail:
exc->GS.loop = 1;
exc->new_top = exc->args;
}
/**************************************************************************
*
* FLIPRGON[]: FLIP RanGe ON
* Opcode range: 0x81
* Stack: uint32 uint32 -->
*/
static void
Ins_FLIPRGON( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort I, K, L;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* See `ttinterp.h' for details on backward compatibility mode. */
if ( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility &&
exc->iupx_called &&
exc->iupy_called )
return;
#endif
K = (FT_UShort)args[1];
L = (FT_UShort)args[0];
if ( BOUNDS( K, exc->pts.n_points ) ||
BOUNDS( L, exc->pts.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
for ( I = L; I <= K; I++ )
exc->pts.tags[I] |= FT_CURVE_TAG_ON;
}
/**************************************************************************
*
* FLIPRGOFF: FLIP RanGe OFF
* Opcode range: 0x82
* Stack: uint32 uint32 -->
*/
static void
Ins_FLIPRGOFF( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort I, K, L;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* See `ttinterp.h' for details on backward compatibility mode. */
if ( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility &&
exc->iupx_called &&
exc->iupy_called )
return;
#endif
K = (FT_UShort)args[1];
L = (FT_UShort)args[0];
if ( BOUNDS( K, exc->pts.n_points ) ||
BOUNDS( L, exc->pts.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
for ( I = L; I <= K; I++ )
exc->pts.tags[I] &= ~FT_CURVE_TAG_ON;
}
static FT_Bool
Compute_Point_Displacement( TT_ExecContext exc,
FT_F26Dot6* x,
FT_F26Dot6* y,
TT_GlyphZone zone,
FT_UShort* refp )
{
TT_GlyphZoneRec zp;
FT_UShort p;
FT_F26Dot6 d;
if ( exc->opcode & 1 )
{
zp = exc->zp0;
p = exc->GS.rp1;
}
else
{
zp = exc->zp1;
p = exc->GS.rp2;
}
if ( BOUNDS( p, zp.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
*refp = 0;
return FAILURE;
}
*zone = zp;
*refp = p;
d = PROJECT( zp.cur + p, zp.org + p );
*x = FT_MulDiv( d, (FT_Long)exc->GS.freeVector.x, exc->F_dot_P );
*y = FT_MulDiv( d, (FT_Long)exc->GS.freeVector.y, exc->F_dot_P );
return SUCCESS;
}
/* See `ttinterp.h' for details on backward compatibility mode. */
static void
Move_Zp2_Point( TT_ExecContext exc,
FT_UShort point,
FT_F26Dot6 dx,
FT_F26Dot6 dy,
FT_Bool touch )
{
if ( exc->GS.freeVector.x != 0 )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
if ( !( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility ) )
#endif
exc->zp2.cur[point].x = ADD_LONG( exc->zp2.cur[point].x, dx );
if ( touch )
exc->zp2.tags[point] |= FT_CURVE_TAG_TOUCH_X;
}
if ( exc->GS.freeVector.y != 0 )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
if ( !( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility &&
exc->iupx_called &&
exc->iupy_called ) )
#endif
exc->zp2.cur[point].y = ADD_LONG( exc->zp2.cur[point].y, dy );
if ( touch )
exc->zp2.tags[point] |= FT_CURVE_TAG_TOUCH_Y;
}
}
/**************************************************************************
*
* SHP[a]: SHift Point by the last point
* Opcode range: 0x32-0x33
* Stack: uint32... -->
*/
static void
Ins_SHP( TT_ExecContext exc )
{
TT_GlyphZoneRec zp;
FT_UShort refp;
FT_F26Dot6 dx, dy;
FT_UShort point;
if ( exc->top < exc->GS.loop )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
if ( Compute_Point_Displacement( exc, &dx, &dy, &zp, &refp ) )
return;
while ( exc->GS.loop > 0 )
{
exc->args--;
point = (FT_UShort)exc->stack[exc->args];
if ( BOUNDS( point, exc->zp2.n_points ) )
{
if ( exc->pedantic_hinting )
{
exc->error = FT_THROW( Invalid_Reference );
return;
}
}
else
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* doesn't follow Cleartype spec but produces better result */
if ( SUBPIXEL_HINTING_INFINALITY && exc->ignore_x_mode )
Move_Zp2_Point( exc, point, 0, dy, TRUE );
else
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
Move_Zp2_Point( exc, point, dx, dy, TRUE );
exc->GS.loop--;
}
Fail:
exc->GS.loop = 1;
exc->new_top = exc->args;
}
/**************************************************************************
*
* SHC[a]: SHift Contour
* Opcode range: 0x34-35
* Stack: uint32 -->
*
* UNDOCUMENTED: According to Greg Hitchcock, there is one (virtual)
* contour in the twilight zone, namely contour number
* zero which includes all points of it.
*/
static void
Ins_SHC( TT_ExecContext exc,
FT_Long* args )
{
TT_GlyphZoneRec zp;
FT_UShort refp;
FT_F26Dot6 dx, dy;
FT_Short contour, bounds;
FT_UShort start, limit, i;
contour = (FT_Short)args[0];
bounds = ( exc->GS.gep2 == 0 ) ? 1 : exc->zp2.n_contours;
if ( BOUNDS( contour, bounds ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
if ( Compute_Point_Displacement( exc, &dx, &dy, &zp, &refp ) )
return;
if ( contour == 0 )
start = 0;
else
start = (FT_UShort)( exc->zp2.contours[contour - 1] + 1 -
exc->zp2.first_point );
/* we use the number of points if in the twilight zone */
if ( exc->GS.gep2 == 0 )
limit = exc->zp2.n_points;
else
limit = (FT_UShort)( exc->zp2.contours[contour] -
exc->zp2.first_point + 1 );
for ( i = start; i < limit; i++ )
{
if ( zp.cur != exc->zp2.cur || refp != i )
Move_Zp2_Point( exc, i, dx, dy, TRUE );
}
}
/**************************************************************************
*
* SHZ[a]: SHift Zone
* Opcode range: 0x36-37
* Stack: uint32 -->
*/
static void
Ins_SHZ( TT_ExecContext exc,
FT_Long* args )
{
TT_GlyphZoneRec zp;
FT_UShort refp;
FT_F26Dot6 dx,
dy;
FT_UShort limit, i;
if ( BOUNDS( args[0], 2 ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
if ( Compute_Point_Displacement( exc, &dx, &dy, &zp, &refp ) )
return;
/* XXX: UNDOCUMENTED! SHZ doesn't move the phantom points. */
/* Twilight zone has no real contours, so use `n_points'. */
/* Normal zone's `n_points' includes phantoms, so must */
/* use end of last contour. */
if ( exc->GS.gep2 == 0 )
limit = (FT_UShort)exc->zp2.n_points;
else if ( exc->GS.gep2 == 1 && exc->zp2.n_contours > 0 )
limit = (FT_UShort)( exc->zp2.contours[exc->zp2.n_contours - 1] + 1 );
else
limit = 0;
/* XXX: UNDOCUMENTED! SHZ doesn't touch the points */
for ( i = 0; i < limit; i++ )
{
if ( zp.cur != exc->zp2.cur || refp != i )
Move_Zp2_Point( exc, i, dx, dy, FALSE );
}
}
/**************************************************************************
*
* SHPIX[]: SHift points by a PIXel amount
* Opcode range: 0x38
* Stack: f26.6 uint32... -->
*/
static void
Ins_SHPIX( TT_ExecContext exc,
FT_Long* args )
{
FT_F26Dot6 dx, dy;
FT_UShort point;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
FT_Bool in_twilight = FT_BOOL( exc->GS.gep0 == 0 ||
exc->GS.gep1 == 0 ||
exc->GS.gep2 == 0 );
#endif
if ( exc->top < exc->GS.loop + 1 )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
dx = TT_MulFix14( args[0], exc->GS.freeVector.x );
dy = TT_MulFix14( args[0], exc->GS.freeVector.y );
while ( exc->GS.loop > 0 )
{
exc->args--;
point = (FT_UShort)exc->stack[exc->args];
if ( BOUNDS( point, exc->zp2.n_points ) )
{
if ( exc->pedantic_hinting )
{
exc->error = FT_THROW( Invalid_Reference );
return;
}
}
else
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode )
{
FT_Int B1, B2;
/* If not using ignore_x_mode rendering, allow ZP2 move. */
/* If inline deltas aren't allowed, skip ZP2 move. */
/* If using ignore_x_mode rendering, allow ZP2 point move if: */
/* - freedom vector is y and sph_compatibility_mode is off */
/* - the glyph is composite and the move is in the Y direction */
/* - the glyph is specifically set to allow SHPIX moves */
/* - the move is on a previously Y-touched point */
/* save point for later comparison */
B1 = exc->zp2.cur[point].y;
if ( exc->face->sph_compatibility_mode )
{
if ( exc->sph_tweak_flags & SPH_TWEAK_ROUND_NONPIXEL_Y_MOVES )
dy = FT_PIX_ROUND( B1 + dy ) - B1;
/* skip post-iup deltas */
if ( exc->iup_called &&
( ( exc->sph_in_func_flags & SPH_FDEF_INLINE_DELTA_1 ) ||
( exc->sph_in_func_flags & SPH_FDEF_INLINE_DELTA_2 ) ) )
goto Skip;
if ( !( exc->sph_tweak_flags & SPH_TWEAK_ALWAYS_SKIP_DELTAP ) &&
( ( exc->is_composite && exc->GS.freeVector.y != 0 ) ||
( exc->zp2.tags[point] & FT_CURVE_TAG_TOUCH_Y ) ||
( exc->sph_tweak_flags & SPH_TWEAK_DO_SHPIX ) ) )
Move_Zp2_Point( exc, point, 0, dy, TRUE );
/* save new point */
if ( exc->GS.freeVector.y != 0 )
{
B2 = exc->zp2.cur[point].y;
/* reverse any disallowed moves */
if ( ( B1 & 63 ) == 0 &&
( B2 & 63 ) != 0 &&
B1 != B2 )
Move_Zp2_Point( exc, point, 0, NEG_LONG( dy ), TRUE );
}
}
else if ( exc->GS.freeVector.y != 0 )
{
Move_Zp2_Point( exc, point, dx, dy, TRUE );
/* save new point */
B2 = exc->zp2.cur[point].y;
/* reverse any disallowed moves */
if ( ( exc->sph_tweak_flags & SPH_TWEAK_SKIP_NONPIXEL_Y_MOVES ) &&
( B1 & 63 ) != 0 &&
( B2 & 63 ) != 0 &&
B1 != B2 )
Move_Zp2_Point( exc,
point,
NEG_LONG( dx ),
NEG_LONG( dy ),
TRUE );
}
else if ( exc->sph_in_func_flags & SPH_FDEF_TYPEMAN_DIAGENDCTRL )
Move_Zp2_Point( exc, point, dx, dy, TRUE );
}
else
#endif
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
if ( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility )
{
/* Special case: allow SHPIX to move points in the twilight zone. */
/* Otherwise, treat SHPIX the same as DELTAP. Unbreaks various */
/* fonts such as older versions of Rokkitt and DTL Argo T Light */
/* that would glitch severely after calling ALIGNRP after a */
/* blocked SHPIX. */
if ( in_twilight ||
( !( exc->iupx_called && exc->iupy_called ) &&
( ( exc->is_composite && exc->GS.freeVector.y != 0 ) ||
( exc->zp2.tags[point] & FT_CURVE_TAG_TOUCH_Y ) ) ) )
Move_Zp2_Point( exc, point, 0, dy, TRUE );
}
else
#endif
Move_Zp2_Point( exc, point, dx, dy, TRUE );
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
Skip:
#endif
exc->GS.loop--;
}
Fail:
exc->GS.loop = 1;
exc->new_top = exc->args;
}
/**************************************************************************
*
* MSIRP[a]: Move Stack Indirect Relative Position
* Opcode range: 0x3A-0x3B
* Stack: f26.6 uint32 -->
*/
static void
Ins_MSIRP( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort point = 0;
FT_F26Dot6 distance;
point = (FT_UShort)args[0];
if ( BOUNDS( point, exc->zp1.n_points ) ||
BOUNDS( exc->GS.rp0, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
/* UNDOCUMENTED! The MS rasterizer does that with */
/* twilight points (confirmed by Greg Hitchcock) */
if ( exc->GS.gep1 == 0 )
{
exc->zp1.org[point] = exc->zp0.org[exc->GS.rp0];
exc->func_move_orig( exc, &exc->zp1, point, args[1] );
exc->zp1.cur[point] = exc->zp1.org[point];
}
distance = PROJECT( exc->zp1.cur + point, exc->zp0.cur + exc->GS.rp0 );
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* subpixel hinting - make MSIRP respect CVT cut-in; */
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.x != 0 )
{
FT_F26Dot6 control_value_cutin = exc->GS.control_value_cutin;
FT_F26Dot6 delta;
if ( !( exc->sph_tweak_flags & SPH_TWEAK_NORMAL_ROUND ) )
control_value_cutin = 0;
delta = SUB_LONG( distance, args[1] );
if ( delta < 0 )
delta = NEG_LONG( delta );
if ( delta >= control_value_cutin )
distance = args[1];
}
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
exc->func_move( exc,
&exc->zp1,
point,
SUB_LONG( args[1], distance ) );
exc->GS.rp1 = exc->GS.rp0;
exc->GS.rp2 = point;
if ( ( exc->opcode & 1 ) != 0 )
exc->GS.rp0 = point;
}
/**************************************************************************
*
* MDAP[a]: Move Direct Absolute Point
* Opcode range: 0x2E-0x2F
* Stack: uint32 -->
*/
static void
Ins_MDAP( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort point;
FT_F26Dot6 cur_dist;
FT_F26Dot6 distance;
point = (FT_UShort)args[0];
if ( BOUNDS( point, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
if ( ( exc->opcode & 1 ) != 0 )
{
cur_dist = FAST_PROJECT( &exc->zp0.cur[point] );
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.x != 0 )
distance = SUB_LONG( Round_None( exc, cur_dist, 3 ), cur_dist );
else
#endif
distance = SUB_LONG( exc->func_round( exc, cur_dist, 3 ), cur_dist );
}
else
distance = 0;
exc->func_move( exc, &exc->zp0, point, distance );
exc->GS.rp0 = point;
exc->GS.rp1 = point;
}
/**************************************************************************
*
* MIAP[a]: Move Indirect Absolute Point
* Opcode range: 0x3E-0x3F
* Stack: uint32 uint32 -->
*/
static void
Ins_MIAP( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong cvtEntry;
FT_UShort point;
FT_F26Dot6 distance;
FT_F26Dot6 org_dist;
cvtEntry = (FT_ULong)args[1];
point = (FT_UShort)args[0];
if ( BOUNDS( point, exc->zp0.n_points ) ||
BOUNDSL( cvtEntry, exc->cvtSize ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
/* UNDOCUMENTED! */
/* */
/* The behaviour of an MIAP instruction is quite different when used */
/* in the twilight zone. */
/* */
/* First, no control value cut-in test is performed as it would fail */
/* anyway. Second, the original point, i.e. (org_x,org_y) of */
/* zp0.point, is set to the absolute, unrounded distance found in the */
/* CVT. */
/* */
/* This is used in the CVT programs of the Microsoft fonts Arial, */
/* Times, etc., in order to re-adjust some key font heights. It */
/* allows the use of the IP instruction in the twilight zone, which */
/* otherwise would be invalid according to the specification. */
/* */
/* We implement it with a special sequence for the twilight zone. */
/* This is a bad hack, but it seems to work. */
/* */
/* Confirmed by Greg Hitchcock. */
distance = exc->func_read_cvt( exc, cvtEntry );
if ( exc->GS.gep0 == 0 ) /* If in twilight zone */
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* Only adjust if not in sph_compatibility_mode or ignore_x_mode. */
/* Determined via experimentation and may be incorrect... */
if ( !( SUBPIXEL_HINTING_INFINALITY &&
( exc->ignore_x_mode &&
exc->face->sph_compatibility_mode ) ) )
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
exc->zp0.org[point].x = TT_MulFix14( distance,
exc->GS.freeVector.x );
exc->zp0.org[point].y = TT_MulFix14( distance,
exc->GS.freeVector.y );
exc->zp0.cur[point] = exc->zp0.org[point];
}
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
( exc->sph_tweak_flags & SPH_TWEAK_MIAP_HACK ) &&
distance > 0 &&
exc->GS.freeVector.y != 0 )
distance = 0;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
org_dist = FAST_PROJECT( &exc->zp0.cur[point] );
if ( ( exc->opcode & 1 ) != 0 ) /* rounding and control cut-in flag */
{
FT_F26Dot6 control_value_cutin = exc->GS.control_value_cutin;
FT_F26Dot6 delta;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.x != 0 &&
exc->GS.freeVector.y == 0 &&
!( exc->sph_tweak_flags & SPH_TWEAK_NORMAL_ROUND ) )
control_value_cutin = 0;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
delta = SUB_LONG( distance, org_dist );
if ( delta < 0 )
delta = NEG_LONG( delta );
if ( delta > control_value_cutin )
distance = org_dist;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.x != 0 )
distance = Round_None( exc, distance, 3 );
else
#endif
distance = exc->func_round( exc, distance, 3 );
}
exc->func_move( exc, &exc->zp0, point, SUB_LONG( distance, org_dist ) );
Fail:
exc->GS.rp0 = point;
exc->GS.rp1 = point;
}
/**************************************************************************
*
* MDRP[abcde]: Move Direct Relative Point
* Opcode range: 0xC0-0xDF
* Stack: uint32 -->
*/
static void
Ins_MDRP( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort point = 0;
FT_F26Dot6 org_dist, distance;
point = (FT_UShort)args[0];
if ( BOUNDS( point, exc->zp1.n_points ) ||
BOUNDS( exc->GS.rp0, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
/* XXX: Is there some undocumented feature while in the */
/* twilight zone? */
/* XXX: UNDOCUMENTED: twilight zone special case */
if ( exc->GS.gep0 == 0 || exc->GS.gep1 == 0 )
{
FT_Vector* vec1 = &exc->zp1.org[point];
FT_Vector* vec2 = &exc->zp0.org[exc->GS.rp0];
org_dist = DUALPROJ( vec1, vec2 );
}
else
{
FT_Vector* vec1 = &exc->zp1.orus[point];
FT_Vector* vec2 = &exc->zp0.orus[exc->GS.rp0];
if ( exc->metrics.x_scale == exc->metrics.y_scale )
{
/* this should be faster */
org_dist = DUALPROJ( vec1, vec2 );
org_dist = FT_MulFix( org_dist, exc->metrics.x_scale );
}
else
{
FT_Vector vec;
vec.x = FT_MulFix( SUB_LONG( vec1->x, vec2->x ),
exc->metrics.x_scale );
vec.y = FT_MulFix( SUB_LONG( vec1->y, vec2->y ),
exc->metrics.y_scale );
org_dist = FAST_DUALPROJ( &vec );
}
}
/* single width cut-in test */
/* |org_dist - single_width_value| < single_width_cutin */
if ( exc->GS.single_width_cutin > 0 &&
org_dist < exc->GS.single_width_value +
exc->GS.single_width_cutin &&
org_dist > exc->GS.single_width_value -
exc->GS.single_width_cutin )
{
if ( org_dist >= 0 )
org_dist = exc->GS.single_width_value;
else
org_dist = -exc->GS.single_width_value;
}
/* round flag */
if ( ( exc->opcode & 4 ) != 0 )
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.x != 0 )
distance = Round_None( exc, org_dist, exc->opcode & 3 );
else
#endif
distance = exc->func_round( exc, org_dist, exc->opcode & 3 );
}
else
distance = Round_None( exc, org_dist, exc->opcode & 3 );
/* minimum distance flag */
if ( ( exc->opcode & 8 ) != 0 )
{
FT_F26Dot6 minimum_distance = exc->GS.minimum_distance;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.x != 0 &&
!( exc->sph_tweak_flags & SPH_TWEAK_NORMAL_ROUND ) )
minimum_distance = 0;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
if ( org_dist >= 0 )
{
if ( distance < minimum_distance )
distance = minimum_distance;
}
else
{
if ( distance > NEG_LONG( minimum_distance ) )
distance = NEG_LONG( minimum_distance );
}
}
/* now move the point */
org_dist = PROJECT( exc->zp1.cur + point, exc->zp0.cur + exc->GS.rp0 );
exc->func_move( exc, &exc->zp1, point, SUB_LONG( distance, org_dist ) );
Fail:
exc->GS.rp1 = exc->GS.rp0;
exc->GS.rp2 = point;
if ( ( exc->opcode & 16 ) != 0 )
exc->GS.rp0 = point;
}
/**************************************************************************
*
* MIRP[abcde]: Move Indirect Relative Point
* Opcode range: 0xE0-0xFF
* Stack: int32? uint32 -->
*/
static void
Ins_MIRP( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort point;
FT_ULong cvtEntry;
FT_F26Dot6 cvt_dist,
distance,
cur_dist,
org_dist;
FT_F26Dot6 delta;
point = (FT_UShort)args[0];
cvtEntry = (FT_ULong)( ADD_LONG( args[1], 1 ) );
/* XXX: UNDOCUMENTED! cvt[-1] = 0 always */
if ( BOUNDS( point, exc->zp1.n_points ) ||
BOUNDSL( cvtEntry, exc->cvtSize + 1 ) ||
BOUNDS( exc->GS.rp0, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
if ( !cvtEntry )
cvt_dist = 0;
else
cvt_dist = exc->func_read_cvt( exc, cvtEntry - 1 );
/* single width test */
delta = SUB_LONG( cvt_dist, exc->GS.single_width_value );
if ( delta < 0 )
delta = NEG_LONG( delta );
if ( delta < exc->GS.single_width_cutin )
{
if ( cvt_dist >= 0 )
cvt_dist = exc->GS.single_width_value;
else
cvt_dist = -exc->GS.single_width_value;
}
/* UNDOCUMENTED! The MS rasterizer does that with */
/* twilight points (confirmed by Greg Hitchcock) */
if ( exc->GS.gep1 == 0 )
{
exc->zp1.org[point].x = ADD_LONG(
exc->zp0.org[exc->GS.rp0].x,
TT_MulFix14( cvt_dist,
exc->GS.freeVector.x ) );
exc->zp1.org[point].y = ADD_LONG(
exc->zp0.org[exc->GS.rp0].y,
TT_MulFix14( cvt_dist,
exc->GS.freeVector.y ) );
exc->zp1.cur[point] = exc->zp1.org[point];
}
org_dist = DUALPROJ( &exc->zp1.org[point], &exc->zp0.org[exc->GS.rp0] );
cur_dist = PROJECT ( &exc->zp1.cur[point], &exc->zp0.cur[exc->GS.rp0] );
/* auto-flip test */
if ( exc->GS.auto_flip )
{
if ( ( org_dist ^ cvt_dist ) < 0 )
cvt_dist = NEG_LONG( cvt_dist );
}
/* control value cut-in and round */
if ( ( exc->opcode & 4 ) != 0 )
{
/* XXX: UNDOCUMENTED! Only perform cut-in test when both points */
/* refer to the same zone. */
if ( exc->GS.gep0 == exc->GS.gep1 )
{
FT_F26Dot6 control_value_cutin = exc->GS.control_value_cutin;
/* XXX: According to Greg Hitchcock, the following wording is */
/* the right one: */
/* */
/* When the absolute difference between the value in */
/* the table [CVT] and the measurement directly from */
/* the outline is _greater_ than the cut_in value, the */
/* outline measurement is used. */
/* */
/* This is from `instgly.doc'. The description in */
/* `ttinst2.doc', version 1.66, is thus incorrect since */
/* it implies `>=' instead of `>'. */
delta = SUB_LONG( cvt_dist, org_dist );
if ( delta < 0 )
delta = NEG_LONG( delta );
if ( delta > control_value_cutin )
cvt_dist = org_dist;
}
distance = exc->func_round( exc, cvt_dist, exc->opcode & 3 );
}
else
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/* do cvt cut-in always in MIRP for sph */
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.gep0 == exc->GS.gep1 )
{
FT_F26Dot6 control_value_cutin = exc->GS.control_value_cutin;
if ( exc->GS.freeVector.x != 0 &&
!( exc->sph_tweak_flags & SPH_TWEAK_NORMAL_ROUND ) )
control_value_cutin = 0;
if ( exc->GS.freeVector.y != 0 &&
( exc->sph_tweak_flags & SPH_TWEAK_TIMES_NEW_ROMAN_HACK ) )
{
if ( cur_dist < -64 )
cvt_dist -= 16;
else if ( cur_dist > 64 && cur_dist < 84 )
cvt_dist += 32;
}
delta = SUB_LONG( cvt_dist, org_dist );
if ( delta < 0 )
delta = NEG_LONG( delta );
if ( delta > control_value_cutin )
cvt_dist = org_dist;
}
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
distance = Round_None( exc, cvt_dist, exc->opcode & 3 );
}
/* minimum distance test */
if ( ( exc->opcode & 8 ) != 0 )
{
FT_F26Dot6 minimum_distance = exc->GS.minimum_distance;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.x != 0 &&
!( exc->sph_tweak_flags & SPH_TWEAK_NORMAL_ROUND ) )
minimum_distance = 0;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
if ( org_dist >= 0 )
{
if ( distance < minimum_distance )
distance = minimum_distance;
}
else
{
if ( distance > NEG_LONG( minimum_distance ) )
distance = NEG_LONG( minimum_distance );
}
}
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->GS.freeVector.y != 0 )
{
FT_Int B1, B2;
B1 = exc->zp1.cur[point].y;
/* Round moves if necessary */
if ( exc->sph_tweak_flags & SPH_TWEAK_ROUND_NONPIXEL_Y_MOVES )
distance = FT_PIX_ROUND( B1 + distance - cur_dist ) - B1 + cur_dist;
if ( ( exc->opcode & 16 ) == 0 &&
( exc->opcode & 8 ) == 0 &&
( exc->sph_tweak_flags & SPH_TWEAK_COURIER_NEW_2_HACK ) )
distance += 64;
exc->func_move( exc,
&exc->zp1,
point,
SUB_LONG( distance, cur_dist ) );
B2 = exc->zp1.cur[point].y;
/* Reverse move if necessary */
if ( ( exc->face->sph_compatibility_mode &&
( B1 & 63 ) == 0 &&
( B2 & 63 ) != 0 ) ||
( ( exc->sph_tweak_flags & SPH_TWEAK_SKIP_NONPIXEL_Y_MOVES ) &&
( B1 & 63 ) != 0 &&
( B2 & 63 ) != 0 ) )
exc->func_move( exc,
&exc->zp1,
point,
SUB_LONG( cur_dist, distance ) );
}
else
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
exc->func_move( exc,
&exc->zp1,
point,
SUB_LONG( distance, cur_dist ) );
Fail:
exc->GS.rp1 = exc->GS.rp0;
if ( ( exc->opcode & 16 ) != 0 )
exc->GS.rp0 = point;
exc->GS.rp2 = point;
}
/**************************************************************************
*
* ALIGNRP[]: ALIGN Relative Point
* Opcode range: 0x3C
* Stack: uint32 uint32... -->
*/
static void
Ins_ALIGNRP( TT_ExecContext exc )
{
FT_UShort point;
FT_F26Dot6 distance;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->iup_called &&
( exc->sph_tweak_flags & SPH_TWEAK_NO_ALIGNRP_AFTER_IUP ) )
{
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
if ( exc->top < exc->GS.loop ||
BOUNDS( exc->GS.rp0, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
while ( exc->GS.loop > 0 )
{
exc->args--;
point = (FT_UShort)exc->stack[exc->args];
if ( BOUNDS( point, exc->zp1.n_points ) )
{
if ( exc->pedantic_hinting )
{
exc->error = FT_THROW( Invalid_Reference );
return;
}
}
else
{
distance = PROJECT( exc->zp1.cur + point,
exc->zp0.cur + exc->GS.rp0 );
exc->func_move( exc, &exc->zp1, point, NEG_LONG( distance ) );
}
exc->GS.loop--;
}
Fail:
exc->GS.loop = 1;
exc->new_top = exc->args;
}
/**************************************************************************
*
* ISECT[]: moves point to InterSECTion
* Opcode range: 0x0F
* Stack: 5 * uint32 -->
*/
static void
Ins_ISECT( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort point,
a0, a1,
b0, b1;
FT_F26Dot6 discriminant, dotproduct;
FT_F26Dot6 dx, dy,
dax, day,
dbx, dby;
FT_F26Dot6 val;
FT_Vector R;
point = (FT_UShort)args[0];
a0 = (FT_UShort)args[1];
a1 = (FT_UShort)args[2];
b0 = (FT_UShort)args[3];
b1 = (FT_UShort)args[4];
if ( BOUNDS( b0, exc->zp0.n_points ) ||
BOUNDS( b1, exc->zp0.n_points ) ||
BOUNDS( a0, exc->zp1.n_points ) ||
BOUNDS( a1, exc->zp1.n_points ) ||
BOUNDS( point, exc->zp2.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
/* Cramer's rule */
dbx = SUB_LONG( exc->zp0.cur[b1].x, exc->zp0.cur[b0].x );
dby = SUB_LONG( exc->zp0.cur[b1].y, exc->zp0.cur[b0].y );
dax = SUB_LONG( exc->zp1.cur[a1].x, exc->zp1.cur[a0].x );
day = SUB_LONG( exc->zp1.cur[a1].y, exc->zp1.cur[a0].y );
dx = SUB_LONG( exc->zp0.cur[b0].x, exc->zp1.cur[a0].x );
dy = SUB_LONG( exc->zp0.cur[b0].y, exc->zp1.cur[a0].y );
discriminant = ADD_LONG( FT_MulDiv( dax, NEG_LONG( dby ), 0x40 ),
FT_MulDiv( day, dbx, 0x40 ) );
dotproduct = ADD_LONG( FT_MulDiv( dax, dbx, 0x40 ),
FT_MulDiv( day, dby, 0x40 ) );
/* The discriminant above is actually a cross product of vectors */
/* da and db. Together with the dot product, they can be used as */
/* surrogates for sine and cosine of the angle between the vectors. */
/* Indeed, */
/* dotproduct = |da||db|cos(angle) */
/* discriminant = |da||db|sin(angle) . */
/* We use these equations to reject grazing intersections by */
/* thresholding abs(tan(angle)) at 1/19, corresponding to 3 degrees. */
if ( MUL_LONG( 19, FT_ABS( discriminant ) ) > FT_ABS( dotproduct ) )
{
val = ADD_LONG( FT_MulDiv( dx, NEG_LONG( dby ), 0x40 ),
FT_MulDiv( dy, dbx, 0x40 ) );
R.x = FT_MulDiv( val, dax, discriminant );
R.y = FT_MulDiv( val, day, discriminant );
/* XXX: Block in backward_compatibility and/or post-IUP? */
exc->zp2.cur[point].x = ADD_LONG( exc->zp1.cur[a0].x, R.x );
exc->zp2.cur[point].y = ADD_LONG( exc->zp1.cur[a0].y, R.y );
}
else
{
/* else, take the middle of the middles of A and B */
/* XXX: Block in backward_compatibility and/or post-IUP? */
exc->zp2.cur[point].x =
ADD_LONG( ADD_LONG( exc->zp1.cur[a0].x, exc->zp1.cur[a1].x ),
ADD_LONG( exc->zp0.cur[b0].x, exc->zp0.cur[b1].x ) ) / 4;
exc->zp2.cur[point].y =
ADD_LONG( ADD_LONG( exc->zp1.cur[a0].y, exc->zp1.cur[a1].y ),
ADD_LONG( exc->zp0.cur[b0].y, exc->zp0.cur[b1].y ) ) / 4;
}
exc->zp2.tags[point] |= FT_CURVE_TAG_TOUCH_BOTH;
}
/**************************************************************************
*
* ALIGNPTS[]: ALIGN PoinTS
* Opcode range: 0x27
* Stack: uint32 uint32 -->
*/
static void
Ins_ALIGNPTS( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort p1, p2;
FT_F26Dot6 distance;
p1 = (FT_UShort)args[0];
p2 = (FT_UShort)args[1];
if ( BOUNDS( p1, exc->zp1.n_points ) ||
BOUNDS( p2, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
distance = PROJECT( exc->zp0.cur + p2, exc->zp1.cur + p1 ) / 2;
exc->func_move( exc, &exc->zp1, p1, distance );
exc->func_move( exc, &exc->zp0, p2, NEG_LONG( distance ) );
}
/**************************************************************************
*
* IP[]: Interpolate Point
* Opcode range: 0x39
* Stack: uint32... -->
*/
/* SOMETIMES, DUMBER CODE IS BETTER CODE */
static void
Ins_IP( TT_ExecContext exc )
{
FT_F26Dot6 old_range, cur_range;
FT_Vector* orus_base;
FT_Vector* cur_base;
FT_Int twilight;
if ( exc->top < exc->GS.loop )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
/*
* We need to deal in a special way with the twilight zone.
* Otherwise, by definition, the value of exc->twilight.orus[n] is (0,0),
* for every n.
*/
twilight = ( exc->GS.gep0 == 0 ||
exc->GS.gep1 == 0 ||
exc->GS.gep2 == 0 );
if ( BOUNDS( exc->GS.rp1, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
goto Fail;
}
if ( twilight )
orus_base = &exc->zp0.org[exc->GS.rp1];
else
orus_base = &exc->zp0.orus[exc->GS.rp1];
cur_base = &exc->zp0.cur[exc->GS.rp1];
/* XXX: There are some glyphs in some braindead but popular */
/* fonts out there (e.g. [aeu]grave in monotype.ttf) */
/* calling IP[] with bad values of rp[12]. */
/* Do something sane when this odd thing happens. */
if ( BOUNDS( exc->GS.rp1, exc->zp0.n_points ) ||
BOUNDS( exc->GS.rp2, exc->zp1.n_points ) )
{
old_range = 0;
cur_range = 0;
}
else
{
if ( twilight )
old_range = DUALPROJ( &exc->zp1.org[exc->GS.rp2], orus_base );
else if ( exc->metrics.x_scale == exc->metrics.y_scale )
old_range = DUALPROJ( &exc->zp1.orus[exc->GS.rp2], orus_base );
else
{
FT_Vector vec;
vec.x = FT_MulFix( SUB_LONG( exc->zp1.orus[exc->GS.rp2].x,
orus_base->x ),
exc->metrics.x_scale );
vec.y = FT_MulFix( SUB_LONG( exc->zp1.orus[exc->GS.rp2].y,
orus_base->y ),
exc->metrics.y_scale );
old_range = FAST_DUALPROJ( &vec );
}
cur_range = PROJECT( &exc->zp1.cur[exc->GS.rp2], cur_base );
}
for ( ; exc->GS.loop > 0; exc->GS.loop-- )
{
FT_UInt point = (FT_UInt)exc->stack[--exc->args];
FT_F26Dot6 org_dist, cur_dist, new_dist;
/* check point bounds */
if ( BOUNDS( point, exc->zp2.n_points ) )
{
if ( exc->pedantic_hinting )
{
exc->error = FT_THROW( Invalid_Reference );
return;
}
continue;
}
if ( twilight )
org_dist = DUALPROJ( &exc->zp2.org[point], orus_base );
else if ( exc->metrics.x_scale == exc->metrics.y_scale )
org_dist = DUALPROJ( &exc->zp2.orus[point], orus_base );
else
{
FT_Vector vec;
vec.x = FT_MulFix( SUB_LONG( exc->zp2.orus[point].x,
orus_base->x ),
exc->metrics.x_scale );
vec.y = FT_MulFix( SUB_LONG( exc->zp2.orus[point].y,
orus_base->y ),
exc->metrics.y_scale );
org_dist = FAST_DUALPROJ( &vec );
}
cur_dist = PROJECT( &exc->zp2.cur[point], cur_base );
if ( org_dist )
{
if ( old_range )
new_dist = FT_MulDiv( org_dist, cur_range, old_range );
else
{
/* This is the same as what MS does for the invalid case: */
/* */
/* delta = (Original_Pt - Original_RP1) - */
/* (Current_Pt - Current_RP1) ; */
/* */
/* In FreeType speak: */
/* */
/* delta = org_dist - cur_dist . */
/* */
/* We move `point' by `new_dist - cur_dist' after leaving */
/* this block, thus we have */
/* */
/* new_dist - cur_dist = delta , */
/* new_dist - cur_dist = org_dist - cur_dist , */
/* new_dist = org_dist . */
new_dist = org_dist;
}
}
else
new_dist = 0;
exc->func_move( exc,
&exc->zp2,
(FT_UShort)point,
SUB_LONG( new_dist, cur_dist ) );
}
Fail:
exc->GS.loop = 1;
exc->new_top = exc->args;
}
/**************************************************************************
*
* UTP[a]: UnTouch Point
* Opcode range: 0x29
* Stack: uint32 -->
*/
static void
Ins_UTP( TT_ExecContext exc,
FT_Long* args )
{
FT_UShort point;
FT_Byte mask;
point = (FT_UShort)args[0];
if ( BOUNDS( point, exc->zp0.n_points ) )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
return;
}
mask = 0xFF;
if ( exc->GS.freeVector.x != 0 )
mask &= ~FT_CURVE_TAG_TOUCH_X;
if ( exc->GS.freeVector.y != 0 )
mask &= ~FT_CURVE_TAG_TOUCH_Y;
exc->zp0.tags[point] &= mask;
}
/* Local variables for Ins_IUP: */
typedef struct IUP_WorkerRec_
{
FT_Vector* orgs; /* original and current coordinate */
FT_Vector* curs; /* arrays */
FT_Vector* orus;
FT_UInt max_points;
} IUP_WorkerRec, *IUP_Worker;
static void
_iup_worker_shift( IUP_Worker worker,
FT_UInt p1,
FT_UInt p2,
FT_UInt p )
{
FT_UInt i;
FT_F26Dot6 dx;
dx = SUB_LONG( worker->curs[p].x, worker->orgs[p].x );
if ( dx != 0 )
{
for ( i = p1; i < p; i++ )
worker->curs[i].x = ADD_LONG( worker->curs[i].x, dx );
for ( i = p + 1; i <= p2; i++ )
worker->curs[i].x = ADD_LONG( worker->curs[i].x, dx );
}
}
static void
_iup_worker_interpolate( IUP_Worker worker,
FT_UInt p1,
FT_UInt p2,
FT_UInt ref1,
FT_UInt ref2 )
{
FT_UInt i;
FT_F26Dot6 orus1, orus2, org1, org2, cur1, cur2, delta1, delta2;
if ( p1 > p2 )
return;
if ( BOUNDS( ref1, worker->max_points ) ||
BOUNDS( ref2, worker->max_points ) )
return;
orus1 = worker->orus[ref1].x;
orus2 = worker->orus[ref2].x;
if ( orus1 > orus2 )
{
FT_F26Dot6 tmp_o;
FT_UInt tmp_r;
tmp_o = orus1;
orus1 = orus2;
orus2 = tmp_o;
tmp_r = ref1;
ref1 = ref2;
ref2 = tmp_r;
}
org1 = worker->orgs[ref1].x;
org2 = worker->orgs[ref2].x;
cur1 = worker->curs[ref1].x;
cur2 = worker->curs[ref2].x;
delta1 = SUB_LONG( cur1, org1 );
delta2 = SUB_LONG( cur2, org2 );
if ( cur1 == cur2 || orus1 == orus2 )
{
/* trivial snap or shift of untouched points */
for ( i = p1; i <= p2; i++ )
{
FT_F26Dot6 x = worker->orgs[i].x;
if ( x <= org1 )
x = ADD_LONG( x, delta1 );
else if ( x >= org2 )
x = ADD_LONG( x, delta2 );
else
x = cur1;
worker->curs[i].x = x;
}
}
else
{
FT_Fixed scale = 0;
FT_Bool scale_valid = 0;
/* interpolation */
for ( i = p1; i <= p2; i++ )
{
FT_F26Dot6 x = worker->orgs[i].x;
if ( x <= org1 )
x = ADD_LONG( x, delta1 );
else if ( x >= org2 )
x = ADD_LONG( x, delta2 );
else
{
if ( !scale_valid )
{
scale_valid = 1;
scale = FT_DivFix( SUB_LONG( cur2, cur1 ),
SUB_LONG( orus2, orus1 ) );
}
x = ADD_LONG( cur1,
FT_MulFix( SUB_LONG( worker->orus[i].x, orus1 ),
scale ) );
}
worker->curs[i].x = x;
}
}
}
/**************************************************************************
*
* IUP[a]: Interpolate Untouched Points
* Opcode range: 0x30-0x31
* Stack: -->
*/
static void
Ins_IUP( TT_ExecContext exc )
{
IUP_WorkerRec V;
FT_Byte mask;
FT_UInt first_point; /* first point of contour */
FT_UInt end_point; /* end point (last+1) of contour */
FT_UInt first_touched; /* first touched point in contour */
FT_UInt cur_touched; /* current touched point in contour */
FT_UInt point; /* current point */
FT_Short contour; /* current contour */
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* See `ttinterp.h' for details on backward compatibility mode. */
/* Allow IUP until it has been called on both axes. Immediately */
/* return on subsequent ones. */
if ( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility )
{
if ( exc->iupx_called && exc->iupy_called )
return;
if ( exc->opcode & 1 )
exc->iupx_called = TRUE;
else
exc->iupy_called = TRUE;
}
#endif
/* ignore empty outlines */
if ( exc->pts.n_contours == 0 )
return;
if ( exc->opcode & 1 )
{
mask = FT_CURVE_TAG_TOUCH_X;
V.orgs = exc->pts.org;
V.curs = exc->pts.cur;
V.orus = exc->pts.orus;
}
else
{
mask = FT_CURVE_TAG_TOUCH_Y;
V.orgs = (FT_Vector*)( (FT_Pos*)exc->pts.org + 1 );
V.curs = (FT_Vector*)( (FT_Pos*)exc->pts.cur + 1 );
V.orus = (FT_Vector*)( (FT_Pos*)exc->pts.orus + 1 );
}
V.max_points = exc->pts.n_points;
contour = 0;
point = 0;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode )
{
exc->iup_called = TRUE;
if ( exc->sph_tweak_flags & SPH_TWEAK_SKIP_IUP )
return;
}
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
do
{
end_point = exc->pts.contours[contour] - exc->pts.first_point;
first_point = point;
if ( BOUNDS( end_point, exc->pts.n_points ) )
end_point = exc->pts.n_points - 1;
while ( point <= end_point && ( exc->pts.tags[point] & mask ) == 0 )
point++;
if ( point <= end_point )
{
first_touched = point;
cur_touched = point;
point++;
while ( point <= end_point )
{
if ( ( exc->pts.tags[point] & mask ) != 0 )
{
_iup_worker_interpolate( &V,
cur_touched + 1,
point - 1,
cur_touched,
point );
cur_touched = point;
}
point++;
}
if ( cur_touched == first_touched )
_iup_worker_shift( &V, first_point, end_point, cur_touched );
else
{
_iup_worker_interpolate( &V,
(FT_UShort)( cur_touched + 1 ),
end_point,
cur_touched,
first_touched );
if ( first_touched > 0 )
_iup_worker_interpolate( &V,
first_point,
first_touched - 1,
cur_touched,
first_touched );
}
}
contour++;
} while ( contour < exc->pts.n_contours );
}
/**************************************************************************
*
* DELTAPn[]: DELTA exceptions P1, P2, P3
* Opcode range: 0x5D,0x71,0x72
* Stack: uint32 (2 * uint32)... -->
*/
static void
Ins_DELTAP( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong nump, k;
FT_UShort A;
FT_ULong C, P;
FT_Long B;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->ignore_x_mode &&
exc->iup_called &&
( exc->sph_tweak_flags & SPH_TWEAK_NO_DELTAP_AFTER_IUP ) )
goto Fail;
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
P = (FT_ULong)exc->func_cur_ppem( exc );
nump = (FT_ULong)args[0]; /* some points theoretically may occur more
than once, thus UShort isn't enough */
for ( k = 1; k <= nump; k++ )
{
if ( exc->args < 2 )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Too_Few_Arguments );
exc->args = 0;
goto Fail;
}
exc->args -= 2;
A = (FT_UShort)exc->stack[exc->args + 1];
B = exc->stack[exc->args];
/* XXX: Because some popular fonts contain some invalid DeltaP */
/* instructions, we simply ignore them when the stacked */
/* point reference is off limit, rather than returning an */
/* error. As a delta instruction doesn't change a glyph */
/* in great ways, this shouldn't be a problem. */
if ( !BOUNDS( A, exc->zp0.n_points ) )
{
C = ( (FT_ULong)B & 0xF0 ) >> 4;
switch ( exc->opcode )
{
case 0x5D:
break;
case 0x71:
C += 16;
break;
case 0x72:
C += 32;
break;
}
C += exc->GS.delta_base;
if ( P == C )
{
B = ( (FT_ULong)B & 0xF ) - 8;
if ( B >= 0 )
B++;
B *= 1L << ( 6 - exc->GS.delta_shift );
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY )
{
/*
* Allow delta move if
*
* - not using ignore_x_mode rendering,
* - glyph is specifically set to allow it, or
* - glyph is composite and freedom vector is not in subpixel
* direction.
*/
if ( !exc->ignore_x_mode ||
( exc->sph_tweak_flags & SPH_TWEAK_ALWAYS_DO_DELTAP ) ||
( exc->is_composite && exc->GS.freeVector.y != 0 ) )
exc->func_move( exc, &exc->zp0, A, B );
/* Otherwise, apply subpixel hinting and compatibility mode */
/* rules, always skipping deltas in subpixel direction. */
else if ( exc->ignore_x_mode && exc->GS.freeVector.y != 0 )
{
FT_UShort B1, B2;
/* save the y value of the point now; compare after move */
B1 = (FT_UShort)exc->zp0.cur[A].y;
/* Standard subpixel hinting: Allow y move for y-touched */
/* points. This messes up DejaVu ... */
if ( !exc->face->sph_compatibility_mode &&
( exc->zp0.tags[A] & FT_CURVE_TAG_TOUCH_Y ) )
exc->func_move( exc, &exc->zp0, A, B );
/* compatibility mode */
else if ( exc->face->sph_compatibility_mode &&
!( exc->sph_tweak_flags & SPH_TWEAK_ALWAYS_SKIP_DELTAP ) )
{
if ( exc->sph_tweak_flags & SPH_TWEAK_ROUND_NONPIXEL_Y_MOVES )
B = FT_PIX_ROUND( B1 + B ) - B1;
/* Allow delta move if using sph_compatibility_mode, */
/* IUP has not been called, and point is touched on Y. */
if ( !exc->iup_called &&
( exc->zp0.tags[A] & FT_CURVE_TAG_TOUCH_Y ) )
exc->func_move( exc, &exc->zp0, A, B );
}
B2 = (FT_UShort)exc->zp0.cur[A].y;
/* Reverse this move if it results in a disallowed move */
if ( exc->GS.freeVector.y != 0 &&
( ( exc->face->sph_compatibility_mode &&
( B1 & 63 ) == 0 &&
( B2 & 63 ) != 0 ) ||
( ( exc->sph_tweak_flags &
SPH_TWEAK_SKIP_NONPIXEL_Y_MOVES_DELTAP ) &&
( B1 & 63 ) != 0 &&
( B2 & 63 ) != 0 ) ) )
exc->func_move( exc, &exc->zp0, A, NEG_LONG( B ) );
}
}
else
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
{
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* See `ttinterp.h' for details on backward compatibility */
/* mode. */
if ( SUBPIXEL_HINTING_MINIMAL &&
exc->backward_compatibility )
{
if ( !( exc->iupx_called && exc->iupy_called ) &&
( ( exc->is_composite && exc->GS.freeVector.y != 0 ) ||
( exc->zp0.tags[A] & FT_CURVE_TAG_TOUCH_Y ) ) )
exc->func_move( exc, &exc->zp0, A, B );
}
else
#endif
exc->func_move( exc, &exc->zp0, A, B );
}
}
}
else
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Invalid_Reference );
}
Fail:
exc->new_top = exc->args;
}
/**************************************************************************
*
* DELTACn[]: DELTA exceptions C1, C2, C3
* Opcode range: 0x73,0x74,0x75
* Stack: uint32 (2 * uint32)... -->
*/
static void
Ins_DELTAC( TT_ExecContext exc,
FT_Long* args )
{
FT_ULong nump, k;
FT_ULong A, C, P;
FT_Long B;
P = (FT_ULong)exc->func_cur_ppem( exc );
nump = (FT_ULong)args[0];
for ( k = 1; k <= nump; k++ )
{
if ( exc->args < 2 )
{
if ( exc->pedantic_hinting )
exc->error = FT_THROW( Too_Few_Arguments );
exc->args = 0;
goto Fail;
}
exc->args -= 2;
A = (FT_ULong)exc->stack[exc->args + 1];
B = exc->stack[exc->args];
if ( BOUNDSL( A, exc->cvtSize ) )
{
if ( exc->pedantic_hinting )
{
exc->error = FT_THROW( Invalid_Reference );
return;
}
}
else
{
C = ( (FT_ULong)B & 0xF0 ) >> 4;
switch ( exc->opcode )
{
case 0x73:
break;
case 0x74:
C += 16;
break;
case 0x75:
C += 32;
break;
}
C += exc->GS.delta_base;
if ( P == C )
{
B = ( (FT_ULong)B & 0xF ) - 8;
if ( B >= 0 )
B++;
B *= 1L << ( 6 - exc->GS.delta_shift );
exc->func_move_cvt( exc, A, B );
}
}
}
Fail:
exc->new_top = exc->args;
}
/**************************************************************************
*
* MISC. INSTRUCTIONS
*
*/
/**************************************************************************
*
* GETINFO[]: GET INFOrmation
* Opcode range: 0x88
* Stack: uint32 --> uint32
*
* XXX: UNDOCUMENTED: Selector bits higher than 9 are currently (May
* 2015) not documented in the OpenType specification.
*
* Selector bit 11 is incorrectly described as bit 8, while the
* real meaning of bit 8 (vertical LCD subpixels) stays
* undocumented. The same mistake can be found in Greg Hitchcock's
* whitepaper.
*/
static void
Ins_GETINFO( TT_ExecContext exc,
FT_Long* args )
{
FT_Long K;
TT_Driver driver = (TT_Driver)FT_FACE_DRIVER( exc->face );
K = 0;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
/*********************************
* RASTERIZER VERSION
* Selector Bit: 0
* Return Bit(s): 0-7
*/
if ( SUBPIXEL_HINTING_INFINALITY &&
( args[0] & 1 ) != 0 &&
exc->subpixel_hinting )
{
if ( exc->ignore_x_mode )
{
/* if in ClearType backward compatibility mode, */
/* we sometimes change the TrueType version dynamically */
K = exc->rasterizer_version;
FT_TRACE6(( "Setting rasterizer version %d\n",
exc->rasterizer_version ));
}
else
K = TT_INTERPRETER_VERSION_38;
}
else
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
if ( ( args[0] & 1 ) != 0 )
K = driver->interpreter_version;
/*********************************
* GLYPH ROTATED
* Selector Bit: 1
* Return Bit(s): 8
*/
if ( ( args[0] & 2 ) != 0 && exc->tt_metrics.rotated )
K |= 1 << 8;
/*********************************
* GLYPH STRETCHED
* Selector Bit: 2
* Return Bit(s): 9
*/
if ( ( args[0] & 4 ) != 0 && exc->tt_metrics.stretched )
K |= 1 << 9;
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
/*********************************
* VARIATION GLYPH
* Selector Bit: 3
* Return Bit(s): 10
*
* XXX: UNDOCUMENTED!
*/
if ( (args[0] & 8 ) != 0 && exc->face->blend )
K |= 1 << 10;
#endif
/*********************************
* BI-LEVEL HINTING AND
* GRAYSCALE RENDERING
* Selector Bit: 5
* Return Bit(s): 12
*/
if ( ( args[0] & 32 ) != 0 && exc->grayscale )
K |= 1 << 12;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL
/* Toggle the following flags only outside of monochrome mode. */
/* Otherwise, instructions may behave weirdly and rendering results */
/* may differ between v35 and v40 mode, e.g., in `Times New Roman */
/* Bold Italic'. */
if ( SUBPIXEL_HINTING_MINIMAL && exc->subpixel_hinting_lean )
{
/*********************************
* HINTING FOR SUBPIXEL
* Selector Bit: 6
* Return Bit(s): 13
*
* v40 does subpixel hinting by default.
*/
if ( ( args[0] & 64 ) != 0 )
K |= 1 << 13;
/*********************************
* VERTICAL LCD SUBPIXELS?
* Selector Bit: 8
* Return Bit(s): 15
*/
if ( ( args[0] & 256 ) != 0 && exc->vertical_lcd_lean )
K |= 1 << 15;
/*********************************
* SUBPIXEL POSITIONED?
* Selector Bit: 10
* Return Bit(s): 17
*
* XXX: FreeType supports it, dependent on what client does?
*/
if ( ( args[0] & 1024 ) != 0 )
K |= 1 << 17;
/*********************************
* SYMMETRICAL SMOOTHING
* Selector Bit: 11
* Return Bit(s): 18
*
* The only smoothing method FreeType supports unless someone sets
* FT_LOAD_TARGET_MONO.
*/
if ( ( args[0] & 2048 ) != 0 && exc->subpixel_hinting_lean )
K |= 1 << 18;
/*********************************
* CLEARTYPE HINTING AND
* GRAYSCALE RENDERING
* Selector Bit: 12
* Return Bit(s): 19
*
* Grayscale rendering is what FreeType does anyway unless someone
* sets FT_LOAD_TARGET_MONO or FT_LOAD_TARGET_LCD(_V)
*/
if ( ( args[0] & 4096 ) != 0 && exc->grayscale_cleartype )
K |= 1 << 19;
}
#endif
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY &&
exc->rasterizer_version >= TT_INTERPRETER_VERSION_35 )
{
if ( exc->rasterizer_version >= 37 )
{
/*********************************
* HINTING FOR SUBPIXEL
* Selector Bit: 6
* Return Bit(s): 13
*/
if ( ( args[0] & 64 ) != 0 && exc->subpixel_hinting )
K |= 1 << 13;
/*********************************
* COMPATIBLE WIDTHS ENABLED
* Selector Bit: 7
* Return Bit(s): 14
*
* Functionality still needs to be added
*/
if ( ( args[0] & 128 ) != 0 && exc->compatible_widths )
K |= 1 << 14;
/*********************************
* VERTICAL LCD SUBPIXELS?
* Selector Bit: 8
* Return Bit(s): 15
*
* Functionality still needs to be added
*/
if ( ( args[0] & 256 ) != 0 && exc->vertical_lcd )
K |= 1 << 15;
/*********************************
* HINTING FOR BGR?
* Selector Bit: 9
* Return Bit(s): 16
*
* Functionality still needs to be added
*/
if ( ( args[0] & 512 ) != 0 && exc->bgr )
K |= 1 << 16;
if ( exc->rasterizer_version >= 38 )
{
/*********************************
* SUBPIXEL POSITIONED?
* Selector Bit: 10
* Return Bit(s): 17
*
* Functionality still needs to be added
*/
if ( ( args[0] & 1024 ) != 0 && exc->subpixel_positioned )
K |= 1 << 17;
/*********************************
* SYMMETRICAL SMOOTHING
* Selector Bit: 11
* Return Bit(s): 18
*
* Functionality still needs to be added
*/
if ( ( args[0] & 2048 ) != 0 && exc->symmetrical_smoothing )
K |= 1 << 18;
/*********************************
* GRAY CLEARTYPE
* Selector Bit: 12
* Return Bit(s): 19
*
* Functionality still needs to be added
*/
if ( ( args[0] & 4096 ) != 0 && exc->gray_cleartype )
K |= 1 << 19;
}
}
}
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
args[0] = K;
}
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
/**************************************************************************
*
* GETVARIATION[]: get normalized variation (blend) coordinates
* Opcode range: 0x91
* Stack: --> f2.14...
*
* XXX: UNDOCUMENTED! There is no official documentation from Apple for
* this bytecode instruction. Active only if a font has GX
* variation axes.
*/
static void
Ins_GETVARIATION( TT_ExecContext exc,
FT_Long* args )
{
FT_UInt num_axes = exc->face->blend->num_axis;
FT_Fixed* coords = exc->face->blend->normalizedcoords;
FT_UInt i;
if ( BOUNDS( num_axes, exc->stackSize + 1 - exc->top ) )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
if ( coords )
{
for ( i = 0; i < num_axes; i++ )
args[i] = coords[i] >> 2; /* convert 16.16 to 2.14 format */
}
else
{
for ( i = 0; i < num_axes; i++ )
args[i] = 0;
}
}
/**************************************************************************
*
* GETDATA[]: no idea what this is good for
* Opcode range: 0x92
* Stack: --> 17
*
* XXX: UNDOCUMENTED! There is no documentation from Apple for this
* very weird bytecode instruction.
*/
static void
Ins_GETDATA( FT_Long* args )
{
args[0] = 17;
}
#endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */
static void
Ins_UNKNOWN( TT_ExecContext exc )
{
TT_DefRecord* def = exc->IDefs;
TT_DefRecord* limit = FT_OFFSET( def, exc->numIDefs );
for ( ; def < limit; def++ )
{
if ( (FT_Byte)def->opc == exc->opcode && def->active )
{
TT_CallRec* call;
if ( exc->callTop >= exc->callSize )
{
exc->error = FT_THROW( Stack_Overflow );
return;
}
call = exc->callStack + exc->callTop++;
call->Caller_Range = exc->curRange;
call->Caller_IP = exc->IP + 1;
call->Cur_Count = 1;
call->Def = def;
Ins_Goto_CodeRange( exc, def->range, def->start );
exc->step_ins = FALSE;
return;
}
}
exc->error = FT_THROW( Invalid_Opcode );
}
/**************************************************************************
*
* RUN
*
* This function executes a run of opcodes. It will exit in the
* following cases:
*
* - Errors (in which case it returns FALSE).
*
* - Reaching the end of the main code range (returns TRUE).
* Reaching the end of a code range within a function call is an
* error.
*
* - After executing one single opcode, if the flag `Instruction_Trap'
* is set to TRUE (returns TRUE).
*
* On exit with TRUE, test IP < CodeSize to know whether it comes from
* an instruction trap or a normal termination.
*
*
* Note: The documented DEBUG opcode pops a value from the stack. This
* behaviour is unsupported; here a DEBUG opcode is always an
* error.
*
*
* THIS IS THE INTERPRETER'S MAIN LOOP.
*
*/
/* documentation is in ttinterp.h */
FT_EXPORT_DEF( FT_Error )
TT_RunIns( TT_ExecContext exc )
{
FT_ULong ins_counter = 0; /* executed instructions counter */
FT_ULong num_twilight_points;
FT_UShort i;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
FT_Byte opcode_pattern[1][2] = {
/* #8 TypeMan Talk Align */
{
0x06, /* SPVTL */
0x7D, /* RDTG */
},
};
FT_UShort opcode_patterns = 1;
FT_UShort opcode_pointer[1] = { 0 };
FT_UShort opcode_size[1] = { 1 };
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
/* We restrict the number of twilight points to a reasonable, */
/* heuristic value to avoid slow execution of malformed bytecode. */
num_twilight_points = FT_MAX( 30,
2 * ( exc->pts.n_points + exc->cvtSize ) );
if ( exc->twilight.n_points > num_twilight_points )
{
if ( num_twilight_points > 0xFFFFU )
num_twilight_points = 0xFFFFU;
FT_TRACE5(( "TT_RunIns: Resetting number of twilight points\n" ));
FT_TRACE5(( " from %d to the more reasonable value %ld\n",
exc->twilight.n_points,
num_twilight_points ));
exc->twilight.n_points = (FT_UShort)num_twilight_points;
}
/* Set up loop detectors. We restrict the number of LOOPCALL loops */
/* and the number of JMPR, JROT, and JROF calls with a negative */
/* argument to values that depend on various parameters like the */
/* size of the CVT table or the number of points in the current */
/* glyph (if applicable). */
/* */
/* The idea is that in real-world bytecode you either iterate over */
/* all CVT entries (in the `prep' table), or over all points (or */
/* contours, in the `glyf' table) of a glyph, and such iterations */
/* don't happen very often. */
exc->loopcall_counter = 0;
exc->neg_jump_counter = 0;
/* The maximum values are heuristic. */
if ( exc->pts.n_points )
exc->loopcall_counter_max = FT_MAX( 50,
10 * exc->pts.n_points ) +
FT_MAX( 50,
exc->cvtSize / 10 );
else
exc->loopcall_counter_max = 300 + 22 * exc->cvtSize;
/* as a protection against an unreasonable number of CVT entries */
/* we assume at most 100 control values per glyph for the counter */
if ( exc->loopcall_counter_max >
100 * (FT_ULong)exc->face->root.num_glyphs )
exc->loopcall_counter_max = 100 * (FT_ULong)exc->face->root.num_glyphs;
FT_TRACE5(( "TT_RunIns: Limiting total number of loops in LOOPCALL"
" to %ld\n", exc->loopcall_counter_max ));
exc->neg_jump_counter_max = exc->loopcall_counter_max;
FT_TRACE5(( "TT_RunIns: Limiting total number of backward jumps"
" to %ld\n", exc->neg_jump_counter_max ));
/* set PPEM and CVT functions */
exc->tt_metrics.ratio = 0;
if ( exc->metrics.x_ppem != exc->metrics.y_ppem )
{
/* non-square pixels, use the stretched routines */
exc->func_cur_ppem = Current_Ppem_Stretched;
exc->func_read_cvt = Read_CVT_Stretched;
exc->func_write_cvt = Write_CVT_Stretched;
exc->func_move_cvt = Move_CVT_Stretched;
}
else
{
/* square pixels, use normal routines */
exc->func_cur_ppem = Current_Ppem;
exc->func_read_cvt = Read_CVT;
exc->func_write_cvt = Write_CVT;
exc->func_move_cvt = Move_CVT;
}
exc->origCvt = exc->cvt;
exc->origStorage = exc->storage;
exc->iniRange = exc->curRange;
Compute_Funcs( exc );
Compute_Round( exc, (FT_Byte)exc->GS.round_state );
do
{
exc->opcode = exc->code[exc->IP];
#ifdef FT_DEBUG_LEVEL_TRACE
if ( ft_trace_levels[trace_ttinterp] >= 6 )
{
FT_Long cnt = FT_MIN( 8, exc->top );
FT_Long n;
/* if tracing level is 7, show current code position */
/* and the first few stack elements also */
FT_TRACE6(( " " ));
FT_TRACE7(( "%06ld ", exc->IP ));
FT_TRACE6(( "%s", opcode_name[exc->opcode] + 2 ));
FT_TRACE7(( "%*s", *opcode_name[exc->opcode] == 'A'
? 2
: 12 - ( *opcode_name[exc->opcode] - '0' ),
"#" ));
for ( n = 1; n <= cnt; n++ )
FT_TRACE7(( " %ld", exc->stack[exc->top - n] ));
FT_TRACE6(( "\n" ));
}
#endif /* FT_DEBUG_LEVEL_TRACE */
if ( ( exc->length = opcode_length[exc->opcode] ) < 0 )
{
if ( exc->IP + 1 >= exc->codeSize )
goto LErrorCodeOverflow_;
exc->length = 2 - exc->length * exc->code[exc->IP + 1];
}
if ( exc->IP + exc->length > exc->codeSize )
goto LErrorCodeOverflow_;
/* First, let's check for empty stack and overflow */
exc->args = exc->top - ( Pop_Push_Count[exc->opcode] >> 4 );
/* `args' is the top of the stack once arguments have been popped. */
/* One can also interpret it as the index of the last argument. */
if ( exc->args < 0 )
{
if ( exc->pedantic_hinting )
{
exc->error = FT_THROW( Too_Few_Arguments );
goto LErrorLabel_;
}
/* push zeroes onto the stack */
for ( i = 0; i < Pop_Push_Count[exc->opcode] >> 4; i++ )
exc->stack[i] = 0;
exc->args = 0;
}
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
if ( exc->opcode == 0x91 )
{
/* this is very special: GETVARIATION returns */
/* a variable number of arguments */
/* it is the job of the application to `activate' GX handling, */
/* this is, calling any of the GX API functions on the current */
/* font to select a variation instance */
if ( exc->face->blend )
exc->new_top = exc->args + exc->face->blend->num_axis;
}
else
#endif
exc->new_top = exc->args + ( Pop_Push_Count[exc->opcode] & 15 );
/* `new_top' is the new top of the stack, after the instruction's */
/* execution. `top' will be set to `new_top' after the `switch' */
/* statement. */
if ( exc->new_top > exc->stackSize )
{
exc->error = FT_THROW( Stack_Overflow );
goto LErrorLabel_;
}
exc->step_ins = TRUE;
exc->error = FT_Err_Ok;
#ifdef TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY
if ( SUBPIXEL_HINTING_INFINALITY )
{
for ( i = 0; i < opcode_patterns; i++ )
{
if ( opcode_pointer[i] < opcode_size[i] &&
exc->opcode == opcode_pattern[i][opcode_pointer[i]] )
{
opcode_pointer[i] += 1;
if ( opcode_pointer[i] == opcode_size[i] )
{
FT_TRACE6(( "sph: opcode ptrn: %d, %s %s\n",
i,
exc->face->root.family_name,
exc->face->root.style_name ));
switch ( i )
{
case 0:
break;
}
opcode_pointer[i] = 0;
}
}
else
opcode_pointer[i] = 0;
}
}
#endif /* TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY */
{
FT_Long* args = exc->stack + exc->args;
FT_Byte opcode = exc->opcode;
switch ( opcode )
{
case 0x00: /* SVTCA y */
case 0x01: /* SVTCA x */
case 0x02: /* SPvTCA y */
case 0x03: /* SPvTCA x */
case 0x04: /* SFvTCA y */
case 0x05: /* SFvTCA x */
Ins_SxyTCA( exc );
break;
case 0x06: /* SPvTL // */
case 0x07: /* SPvTL + */
Ins_SPVTL( exc, args );
break;
case 0x08: /* SFvTL // */
case 0x09: /* SFvTL + */
Ins_SFVTL( exc, args );
break;
case 0x0A: /* SPvFS */
Ins_SPVFS( exc, args );
break;
case 0x0B: /* SFvFS */
Ins_SFVFS( exc, args );
break;
case 0x0C: /* GPv */
Ins_GPV( exc, args );
break;
case 0x0D: /* GFv */
Ins_GFV( exc, args );
break;
case 0x0E: /* SFvTPv */
Ins_SFVTPV( exc );
break;
case 0x0F: /* ISECT */
Ins_ISECT( exc, args );
break;
case 0x10: /* SRP0 */
Ins_SRP0( exc, args );
break;
case 0x11: /* SRP1 */
Ins_SRP1( exc, args );
break;
case 0x12: /* SRP2 */
Ins_SRP2( exc, args );
break;
case 0x13: /* SZP0 */
Ins_SZP0( exc, args );
break;
case 0x14: /* SZP1 */
Ins_SZP1( exc, args );
break;
case 0x15: /* SZP2 */
Ins_SZP2( exc, args );
break;
case 0x16: /* SZPS */
Ins_SZPS( exc, args );
break;
case 0x17: /* SLOOP */
Ins_SLOOP( exc, args );
break;
case 0x18: /* RTG */
Ins_RTG( exc );
break;
case 0x19: /* RTHG */
Ins_RTHG( exc );
break;
case 0x1A: /* SMD */
Ins_SMD( exc, args );
break;
case 0x1B: /* ELSE */
Ins_ELSE( exc );
break;
case 0x1C: /* JMPR */
Ins_JMPR( exc, args );
break;
case 0x1D: /* SCVTCI */
Ins_SCVTCI( exc, args );
break;
case 0x1E: /* SSWCI */
Ins_SSWCI( exc, args );
break;
case 0x1F: /* SSW */
Ins_SSW( exc, args );
break;
case 0x20: /* DUP */
Ins_DUP( args );
break;
case 0x21: /* POP */
Ins_POP();
break;
case 0x22: /* CLEAR */
Ins_CLEAR( exc );
break;
case 0x23: /* SWAP */
Ins_SWAP( args );
break;
case 0x24: /* DEPTH */
Ins_DEPTH( exc, args );
break;
case 0x25: /* CINDEX */
Ins_CINDEX( exc, args );
break;
case 0x26: /* MINDEX */
Ins_MINDEX( exc, args );
break;
case 0x27: /* ALIGNPTS */
Ins_ALIGNPTS( exc, args );
break;
case 0x28: /* RAW */
Ins_UNKNOWN( exc );
break;
case 0x29: /* UTP */
Ins_UTP( exc, args );
break;
case 0x2A: /* LOOPCALL */
Ins_LOOPCALL( exc, args );
break;
case 0x2B: /* CALL */
Ins_CALL( exc, args );
break;
case 0x2C: /* FDEF */
Ins_FDEF( exc, args );
break;
case 0x2D: /* ENDF */
Ins_ENDF( exc );
break;
case 0x2E: /* MDAP */
case 0x2F: /* MDAP */
Ins_MDAP( exc, args );
break;
case 0x30: /* IUP */
case 0x31: /* IUP */
Ins_IUP( exc );
break;
case 0x32: /* SHP */
case 0x33: /* SHP */
Ins_SHP( exc );
break;
case 0x34: /* SHC */
case 0x35: /* SHC */
Ins_SHC( exc, args );
break;
case 0x36: /* SHZ */
case 0x37: /* SHZ */
Ins_SHZ( exc, args );
break;
case 0x38: /* SHPIX */
Ins_SHPIX( exc, args );
break;
case 0x39: /* IP */
Ins_IP( exc );
break;
case 0x3A: /* MSIRP */
case 0x3B: /* MSIRP */
Ins_MSIRP( exc, args );
break;
case 0x3C: /* AlignRP */
Ins_ALIGNRP( exc );
break;
case 0x3D: /* RTDG */
Ins_RTDG( exc );
break;
case 0x3E: /* MIAP */
case 0x3F: /* MIAP */
Ins_MIAP( exc, args );
break;
case 0x40: /* NPUSHB */
Ins_NPUSHB( exc, args );
break;
case 0x41: /* NPUSHW */
Ins_NPUSHW( exc, args );
break;
case 0x42: /* WS */
Ins_WS( exc, args );
break;
case 0x43: /* RS */
Ins_RS( exc, args );
break;
case 0x44: /* WCVTP */
Ins_WCVTP( exc, args );
break;
case 0x45: /* RCVT */
Ins_RCVT( exc, args );
break;
case 0x46: /* GC */
case 0x47: /* GC */
Ins_GC( exc, args );
break;
case 0x48: /* SCFS */
Ins_SCFS( exc, args );
break;
case 0x49: /* MD */
case 0x4A: /* MD */
Ins_MD( exc, args );
break;
case 0x4B: /* MPPEM */
Ins_MPPEM( exc, args );
break;
case 0x4C: /* MPS */
Ins_MPS( exc, args );
break;
case 0x4D: /* FLIPON */
Ins_FLIPON( exc );
break;
case 0x4E: /* FLIPOFF */
Ins_FLIPOFF( exc );
break;
case 0x4F: /* DEBUG */
Ins_DEBUG( exc );
break;
case 0x50: /* LT */
Ins_LT( args );
break;
case 0x51: /* LTEQ */
Ins_LTEQ( args );
break;
case 0x52: /* GT */
Ins_GT( args );
break;
case 0x53: /* GTEQ */
Ins_GTEQ( args );
break;
case 0x54: /* EQ */
Ins_EQ( args );
break;
case 0x55: /* NEQ */
Ins_NEQ( args );
break;
case 0x56: /* ODD */
Ins_ODD( exc, args );
break;
case 0x57: /* EVEN */
Ins_EVEN( exc, args );
break;
case 0x58: /* IF */
Ins_IF( exc, args );
break;
case 0x59: /* EIF */
Ins_EIF();
break;
case 0x5A: /* AND */
Ins_AND( args );
break;
case 0x5B: /* OR */
Ins_OR( args );
break;
case 0x5C: /* NOT */
Ins_NOT( args );
break;
case 0x5D: /* DELTAP1 */
Ins_DELTAP( exc, args );
break;
case 0x5E: /* SDB */
Ins_SDB( exc, args );
break;
case 0x5F: /* SDS */
Ins_SDS( exc, args );
break;
case 0x60: /* ADD */
Ins_ADD( args );
break;
case 0x61: /* SUB */
Ins_SUB( args );
break;
case 0x62: /* DIV */
Ins_DIV( exc, args );
break;
case 0x63: /* MUL */
Ins_MUL( args );
break;
case 0x64: /* ABS */
Ins_ABS( args );
break;
case 0x65: /* NEG */
Ins_NEG( args );
break;
case 0x66: /* FLOOR */
Ins_FLOOR( args );
break;
case 0x67: /* CEILING */
Ins_CEILING( args );
break;
case 0x68: /* ROUND */
case 0x69: /* ROUND */
case 0x6A: /* ROUND */
case 0x6B: /* ROUND */
Ins_ROUND( exc, args );
break;
case 0x6C: /* NROUND */
case 0x6D: /* NROUND */
case 0x6E: /* NRRUND */
case 0x6F: /* NROUND */
Ins_NROUND( exc, args );
break;
case 0x70: /* WCVTF */
Ins_WCVTF( exc, args );
break;
case 0x71: /* DELTAP2 */
case 0x72: /* DELTAP3 */
Ins_DELTAP( exc, args );
break;
case 0x73: /* DELTAC0 */
case 0x74: /* DELTAC1 */
case 0x75: /* DELTAC2 */
Ins_DELTAC( exc, args );
break;
case 0x76: /* SROUND */
Ins_SROUND( exc, args );
break;
case 0x77: /* S45Round */
Ins_S45ROUND( exc, args );
break;
case 0x78: /* JROT */
Ins_JROT( exc, args );
break;
case 0x79: /* JROF */
Ins_JROF( exc, args );
break;
case 0x7A: /* ROFF */
Ins_ROFF( exc );
break;
case 0x7B: /* ???? */
Ins_UNKNOWN( exc );
break;
case 0x7C: /* RUTG */
Ins_RUTG( exc );
break;
case 0x7D: /* RDTG */
Ins_RDTG( exc );
break;
case 0x7E: /* SANGW */
Ins_SANGW();
break;
case 0x7F: /* AA */
Ins_AA();
break;
case 0x80: /* FLIPPT */
Ins_FLIPPT( exc );
break;
case 0x81: /* FLIPRGON */
Ins_FLIPRGON( exc, args );
break;
case 0x82: /* FLIPRGOFF */
Ins_FLIPRGOFF( exc, args );
break;
case 0x83: /* UNKNOWN */
case 0x84: /* UNKNOWN */
Ins_UNKNOWN( exc );
break;
case 0x85: /* SCANCTRL */
Ins_SCANCTRL( exc, args );
break;
case 0x86: /* SDPvTL */
case 0x87: /* SDPvTL */
Ins_SDPVTL( exc, args );
break;
case 0x88: /* GETINFO */
Ins_GETINFO( exc, args );
break;
case 0x89: /* IDEF */
Ins_IDEF( exc, args );
break;
case 0x8A: /* ROLL */
Ins_ROLL( args );
break;
case 0x8B: /* MAX */
Ins_MAX( args );
break;
case 0x8C: /* MIN */
Ins_MIN( args );
break;
case 0x8D: /* SCANTYPE */
Ins_SCANTYPE( exc, args );
break;
case 0x8E: /* INSTCTRL */
Ins_INSTCTRL( exc, args );
break;
case 0x8F: /* ADJUST */
case 0x90: /* ADJUST */
Ins_UNKNOWN( exc );
break;
#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT
case 0x91:
/* it is the job of the application to `activate' GX handling, */
/* this is, calling any of the GX API functions on the current */
/* font to select a variation instance */
if ( exc->face->blend )
Ins_GETVARIATION( exc, args );
else
Ins_UNKNOWN( exc );
break;
case 0x92:
/* there is at least one MS font (LaoUI.ttf version 5.01) that */
/* uses IDEFs for 0x91 and 0x92; for this reason we activate */
/* GETDATA for GX fonts only, similar to GETVARIATION */
if ( exc->face->blend )
Ins_GETDATA( args );
else
Ins_UNKNOWN( exc );
break;
#endif
default:
if ( opcode >= 0xE0 )
Ins_MIRP( exc, args );
else if ( opcode >= 0xC0 )
Ins_MDRP( exc, args );
else if ( opcode >= 0xB8 )
Ins_PUSHW( exc, args );
else if ( opcode >= 0xB0 )
Ins_PUSHB( exc, args );
else
Ins_UNKNOWN( exc );
}
}
if ( exc->error )
{
switch ( exc->error )
{
/* looking for redefined instructions */
case FT_ERR( Invalid_Opcode ):
{
TT_DefRecord* def = exc->IDefs;
TT_DefRecord* limit = FT_OFFSET( def, exc->numIDefs );
for ( ; def < limit; def++ )
{
if ( def->active && exc->opcode == (FT_Byte)def->opc )
{
TT_CallRec* callrec;
if ( exc->callTop >= exc->callSize )
{
exc->error = FT_THROW( Invalid_Reference );
goto LErrorLabel_;
}
callrec = &exc->callStack[exc->callTop];
callrec->Caller_Range = exc->curRange;
callrec->Caller_IP = exc->IP + 1;
callrec->Cur_Count = 1;
callrec->Def = def;
if ( Ins_Goto_CodeRange( exc,
def->range,
def->start ) == FAILURE )
goto LErrorLabel_;
goto LSuiteLabel_;
}
}
}
exc->error = FT_THROW( Invalid_Opcode );
goto LErrorLabel_;
#if 0
break; /* Unreachable code warning suppression. */
/* Leave to remind in case a later change the editor */
/* to consider break; */
#endif
default:
goto LErrorLabel_;
#if 0
break;
#endif
}
}
exc->top = exc->new_top;
if ( exc->step_ins )
exc->IP += exc->length;
/* increment instruction counter and check if we didn't */
/* run this program for too long (e.g. infinite loops). */
if ( ++ins_counter > TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES ) {
exc->error = FT_THROW( Execution_Too_Long );
goto LErrorLabel_;
}
LSuiteLabel_:
if ( exc->IP >= exc->codeSize )
{
if ( exc->callTop > 0 )
{
exc->error = FT_THROW( Code_Overflow );
goto LErrorLabel_;
}
else
goto LNo_Error_;
}
} while ( !exc->instruction_trap );
LNo_Error_:
FT_TRACE4(( " %ld instruction%s executed\n",
ins_counter,
ins_counter == 1 ? "" : "s" ));
exc->cvt = exc->origCvt;
exc->storage = exc->origStorage;
return FT_Err_Ok;
LErrorCodeOverflow_:
exc->error = FT_THROW( Code_Overflow );
LErrorLabel_:
if ( exc->error && !exc->instruction_trap )
FT_TRACE1(( " The interpreter returned error 0x%x\n", exc->error ));
exc->cvt = exc->origCvt;
exc->storage = exc->origStorage;
return exc->error;
}
#else /* !TT_USE_BYTECODE_INTERPRETER */
/* ANSI C doesn't like empty source files */
typedef int _tt_interp_dummy;
#endif /* !TT_USE_BYTECODE_INTERPRETER */
/* END */