ref: 36a905e17425af668d2db882fd33ee598b404ed6
dir: /docs/INSTALL.VMS/
How to build the FreeType 2 library on VMS
-----------------------------------------
It is actually very straightforward to install the FreeType 2 library.
Just execute vms_make.com from the toplevel directory to build the
library. This procedure currently accepts the following options:
DEBUG
Build the library with debug information and without optimization.
lopts=<value>
Options to pass to the link command e.g. lopts=/traceback
ccopt=<value>
Options to pass to the C compiler e.g. ccopt=/float=ieee
In case you did download the demos, place them in a separate directory
sharing the same top level as the directory of FreeType 2 and follow
the same instructions as above for the demos from there. The build
process relies on this to figure out the location of the FreeType 2
include files.
To rebuild the sources it is necessary to have MMS/MMK installed on
the system.
The library is available in the directory
[.LIB]
To compile applications using FreeType 2 you have to define the
logical FREETYPE pointing to the directory
[.INCLUDE.FREETYPE]
i.e., if the directory in which this INSTALL.VMS file is located is
$disk:[freetype] then define the logical with
define freetype $disk:[freetype.include.freetype]
This version has been tested with Compaq C V6.2-006 on OpenVMS Alpha
V7.2-1.
Any problems can be reported to
Jouk Jansen <joukj@hrem.stm.tudelft.nl> or
Martin P.J. Zinser <zinser@zinser.no-ip.info>
------------------------------------------------------------------------
Copyright (C) 2000-2021 by
David Turner, Robert Wilhelm, and Werner Lemberg.
This file is part of the FreeType project, and may only be used,
modified, and distributed under the terms of the FreeType project
license, LICENSE.TXT. By continuing to use, modify, or distribute this
file you indicate that you have read the license and understand and
accept it fully.
--- end of INSTALL.VMS ---