shithub: libvpx

Info  •  Files  •  Log  •  Branches

SVC: Fix duplicated run of svc datarate tests.

Change-Id: I3f4e45b398009852f1183943461625d621c4eb80

--- a/test/svc_datarate_test.cc

+++ b/test/svc_datarate_test.cc

@@ -84,23 +84,14 @@

     }

 }

-// Params: speed setting, layer framedrop control and index for bitrate array.

-class DatarateOnePassCbrSvc

-    : public ::libvpx_test::EncoderTest,

-      public ::libvpx_test::CodecTestWith3Params<int, int, int> {

+class DatarateOnePassCbrSvc : public ::libvpx_test::EncoderTest {

  public:

-  DatarateOnePassCbrSvc() : EncoderTest(GET_PARAM(0)) {

-    memset(&svc_params_, 0, sizeof(svc_params_));

-  }

-  virtual ~DatarateOnePassCbrSvc() {}

+  explicit DatarateOnePassCbrSvc(const ::libvpx_test::CodecFactory *codec)

+      : EncoderTest(codec) {}

  protected:

-  virtual void SetUp() {

-    InitializeConfig();

-    SetMode(::libvpx_test::kRealTime);

-    speed_setting_ = GET_PARAM(1);

-    ResetModel();

-  }

+  virtual ~DatarateOnePassCbrSvc() {}

+

   virtual void ResetModel() {

     last_pts_ = 0;

     duration_ = 0.0;

@@ -472,10 +463,29 @@

   int layer_framedrop_;

 };

+// Params: speed setting.

+class DatarateOnePassCbrSvcSingleBR

+    : public DatarateOnePassCbrSvc,

+      public ::libvpx_test::CodecTestWithParam<int> {

+ public:

+  DatarateOnePassCbrSvcSingleBR() : DatarateOnePassCbrSvc(GET_PARAM(0)) {

+    memset(&svc_params_, 0, sizeof(svc_params_));

+  }

+  virtual ~DatarateOnePassCbrSvcSingleBR() {}

+

+ protected:

+  virtual void SetUp() {

+    InitializeConfig();

+    SetMode(::libvpx_test::kRealTime);

+    speed_setting_ = GET_PARAM(1);

+    ResetModel();

+  }

+};

+

 // Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and 1

 // temporal layer, with screen content mode on and same speed setting for all

 // layers.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL1TLScreenContent1) {

+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc2SL1TLScreenContent1) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -517,9 +527,9 @@

 #endif

 }

-// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and

+// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and

 // 3 temporal layers. Run CIF clip with 1 thread.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL3TL) {

+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL3TL) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -527,7 +537,7 @@

   cfg_.rc_max_quantizer = 63;

   cfg_.rc_end_usage = VPX_CBR;

   cfg_.g_lag_in_frames = 0;

-  cfg_.ss_number_layers = 2;

+  cfg_.ss_number_layers = 3;

   cfg_.ts_number_layers = 3;

   cfg_.ts_rate_decimator[0] = 4;

   cfg_.ts_rate_decimator[1] = 2;

@@ -535,10 +545,12 @@

   cfg_.g_error_resilient = 1;

   cfg_.g_threads = 1;

   cfg_.temporal_layering_mode = 3;

-  svc_params_.scaling_factor_num[0] = 144;

+  svc_params_.scaling_factor_num[0] = 72;

   svc_params_.scaling_factor_den[0] = 288;

-  svc_params_.scaling_factor_num[1] = 288;

+  svc_params_.scaling_factor_num[1] = 144;

   svc_params_.scaling_factor_den[1] = 288;

+  svc_params_.scaling_factor_num[2] = 288;

+  svc_params_.scaling_factor_den[2] = 288;

   cfg_.rc_dropframe_thresh = 30;

   cfg_.kf_max_dist = 9999;

   number_spatial_layers_ = cfg_.ss_number_layers;

@@ -547,10 +559,7 @@

                                        0, 400);

   top_sl_width_ = 640;

   top_sl_height_ = 480;

-  const int bitrates[3] = { 200, 400, 600 };

-  // TODO(marpan): Check that effective_datarate for each layer hits the

-  // layer target_bitrate.

-  cfg_.rc_target_bitrate = bitrates[GET_PARAM(3)];

+  cfg_.rc_target_bitrate = 800;

   ResetModel();

   AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,

                       cfg_.ts_number_layers, cfg_.temporal_layering_mode,

@@ -557,7 +566,7 @@

                       layer_target_avg_bandwidth_, bits_in_buffer_model_);

   ASSERT_NO_FATAL_FAILURE(RunLoop(&video));

   CheckLayerRateTargeting(&cfg_, number_spatial_layers_,

-                          number_temporal_layers_, file_datarate_, 0.75, 1.2);

+                          number_temporal_layers_, file_datarate_, 0.78, 1.15);

 #if CONFIG_VP9_DECODER

   // The non-reference frames are expected to be mismatched frames as the

   // encoder will avoid loopfilter on these frames.

@@ -565,9 +574,9 @@

 #endif

 }

-// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and

-// 3 temporal layers. Run HD clip with 4 threads.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL3TL4Threads) {

+// Check rate targeting for 1 pass CBR SVC: 3 spatial layers and

+// 3 temporal layers, changing the target bitrate at the middle of encoding.

+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL3TLDynamicBitrateChange) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -575,36 +584,37 @@

   cfg_.rc_max_quantizer = 63;

   cfg_.rc_end_usage = VPX_CBR;

   cfg_.g_lag_in_frames = 0;

-  cfg_.ss_number_layers = 2;

+  cfg_.ss_number_layers = 3;

   cfg_.ts_number_layers = 3;

   cfg_.ts_rate_decimator[0] = 4;

   cfg_.ts_rate_decimator[1] = 2;

   cfg_.ts_rate_decimator[2] = 1;

   cfg_.g_error_resilient = 1;

-  cfg_.g_threads = 4;

+  cfg_.g_threads = 1;

   cfg_.temporal_layering_mode = 3;

-  svc_params_.scaling_factor_num[0] = 144;

+  svc_params_.scaling_factor_num[0] = 72;

   svc_params_.scaling_factor_den[0] = 288;

-  svc_params_.scaling_factor_num[1] = 288;

+  svc_params_.scaling_factor_num[1] = 144;

   svc_params_.scaling_factor_den[1] = 288;

+  svc_params_.scaling_factor_num[2] = 288;

+  svc_params_.scaling_factor_den[2] = 288;

   cfg_.rc_dropframe_thresh = 30;

   cfg_.kf_max_dist = 9999;

   number_spatial_layers_ = cfg_.ss_number_layers;

   number_temporal_layers_ = cfg_.ts_number_layers;

-  ::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 60);

-  top_sl_width_ = 1280;

-  top_sl_height_ = 720;

-  layer_framedrop_ = 0;

-  const int bitrates[3] = { 200, 400, 600 };

-  cfg_.rc_target_bitrate = bitrates[GET_PARAM(3)];

+  ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,

+                                       0, 400);

+  top_sl_width_ = 640;

+  top_sl_height_ = 480;

+  cfg_.rc_target_bitrate = 800;

   ResetModel();

-  layer_framedrop_ = GET_PARAM(2);

+  change_bitrate_ = true;

   AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,

                       cfg_.ts_number_layers, cfg_.temporal_layering_mode,

                       layer_target_avg_bandwidth_, bits_in_buffer_model_);

   ASSERT_NO_FATAL_FAILURE(RunLoop(&video));

   CheckLayerRateTargeting(&cfg_, number_spatial_layers_,

-                          number_temporal_layers_, file_datarate_, 0.75, 1.2);

+                          number_temporal_layers_, file_datarate_, 0.78, 1.15);

 #if CONFIG_VP9_DECODER

   // The non-reference frames are expected to be mismatched frames as the

   // encoder will avoid loopfilter on these frames.

@@ -613,8 +623,10 @@

 }

 // Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and

-// 3 temporal layers. Run CIF clip with 1 thread.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL3TL) {

+// 2 temporal layers, with a change on the fly from the fixed SVC pattern to one

+// generate via SVC_SET_REF_FRAME_CONFIG. The new pattern also disables

+// inter-layer prediction.

+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL2TLDynamicPatternChange) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -623,13 +635,12 @@

   cfg_.rc_end_usage = VPX_CBR;

   cfg_.g_lag_in_frames = 0;

   cfg_.ss_number_layers = 3;

-  cfg_.ts_number_layers = 3;

-  cfg_.ts_rate_decimator[0] = 4;

-  cfg_.ts_rate_decimator[1] = 2;

-  cfg_.ts_rate_decimator[2] = 1;

+  cfg_.ts_number_layers = 2;

+  cfg_.ts_rate_decimator[0] = 2;

+  cfg_.ts_rate_decimator[1] = 1;

   cfg_.g_error_resilient = 1;

   cfg_.g_threads = 1;

-  cfg_.temporal_layering_mode = 3;

+  cfg_.temporal_layering_mode = 2;

   svc_params_.scaling_factor_num[0] = 72;

   svc_params_.scaling_factor_den[0] = 288;

   svc_params_.scaling_factor_num[1] = 144;

@@ -640,6 +651,8 @@

   cfg_.kf_max_dist = 9999;

   number_spatial_layers_ = cfg_.ss_number_layers;

   number_temporal_layers_ = cfg_.ts_number_layers;

+  // Change SVC pattern on the fly.

+  update_pattern_ = 1;

   ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,

                                        0, 400);

   top_sl_width_ = 640;

@@ -659,9 +672,11 @@

 #endif

 }

-// Check rate targeting for 1 pass CBR SVC: 3 spatial layers and

-// 3 temporal layers, changing the target bitrate at the middle of encoding.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL3TLDynamicBitrateChange) {

+// Check basic rate targeting for 1 pass CBR SVC with 3 spatial layers and on

+// the fly switching to 1 and then 2 and back to 3 spatial layers. This switch

+// is done by setting spatial layer bitrates to 0, and then back to non-zero,

+// during the sequence.

+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL_DisableEnableLayers) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -670,13 +685,11 @@

   cfg_.rc_end_usage = VPX_CBR;

   cfg_.g_lag_in_frames = 0;

   cfg_.ss_number_layers = 3;

-  cfg_.ts_number_layers = 3;

-  cfg_.ts_rate_decimator[0] = 4;

-  cfg_.ts_rate_decimator[1] = 2;

-  cfg_.ts_rate_decimator[2] = 1;

+  cfg_.ts_number_layers = 1;

+  cfg_.ts_rate_decimator[0] = 1;

   cfg_.g_error_resilient = 1;

   cfg_.g_threads = 1;

-  cfg_.temporal_layering_mode = 3;

+  cfg_.temporal_layering_mode = 0;

   svc_params_.scaling_factor_num[0] = 72;

   svc_params_.scaling_factor_den[0] = 288;

   svc_params_.scaling_factor_num[1] = 144;

@@ -693,12 +706,14 @@

   top_sl_height_ = 480;

   cfg_.rc_target_bitrate = 800;

   ResetModel();

-  change_bitrate_ = true;

+  dynamic_drop_layer_ = true;

   AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,

                       cfg_.ts_number_layers, cfg_.temporal_layering_mode,

                       layer_target_avg_bandwidth_, bits_in_buffer_model_);

   ASSERT_NO_FATAL_FAILURE(RunLoop(&video));

-  CheckLayerRateTargeting(&cfg_, number_spatial_layers_,

+  // Don't check rate targeting on top spatial layer since it will be skipped

+  // for part of the sequence.

+  CheckLayerRateTargeting(&cfg_, number_spatial_layers_ - 1,

                           number_temporal_layers_, file_datarate_, 0.78, 1.15);

 #if CONFIG_VP9_DECODER

   // The non-reference frames are expected to be mismatched frames as the

@@ -707,11 +722,28 @@

 #endif

 }

-// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and

-// 2 temporal layers, with a change on the fly from the fixed SVC pattern to one

-// generate via SVC_SET_REF_FRAME_CONFIG. The new pattern also disables

-// inter-layer prediction.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL2TLDynamicPatternChange) {

+// Params: speed setting and index for bitrate array.

+class DatarateOnePassCbrSvcMultiBR

+    : public DatarateOnePassCbrSvc,

+      public ::libvpx_test::CodecTestWith2Params<int, int> {

+ public:

+  DatarateOnePassCbrSvcMultiBR() : DatarateOnePassCbrSvc(GET_PARAM(0)) {

+    memset(&svc_params_, 0, sizeof(svc_params_));

+  }

+  virtual ~DatarateOnePassCbrSvcMultiBR() {}

+

+ protected:

+  virtual void SetUp() {

+    InitializeConfig();

+    SetMode(::libvpx_test::kRealTime);

+    speed_setting_ = GET_PARAM(1);

+    ResetModel();

+  }

+};

+

+// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and

+// 3 temporal layers. Run CIF clip with 1 thread.

+TEST_P(DatarateOnePassCbrSvcMultiBR, OnePassCbrSvc2SL3TL) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -719,30 +751,30 @@

   cfg_.rc_max_quantizer = 63;

   cfg_.rc_end_usage = VPX_CBR;

   cfg_.g_lag_in_frames = 0;

-  cfg_.ss_number_layers = 3;

-  cfg_.ts_number_layers = 2;

-  cfg_.ts_rate_decimator[0] = 2;

-  cfg_.ts_rate_decimator[1] = 1;

+  cfg_.ss_number_layers = 2;

+  cfg_.ts_number_layers = 3;

+  cfg_.ts_rate_decimator[0] = 4;

+  cfg_.ts_rate_decimator[1] = 2;

+  cfg_.ts_rate_decimator[2] = 1;

   cfg_.g_error_resilient = 1;

   cfg_.g_threads = 1;

-  cfg_.temporal_layering_mode = 2;

-  svc_params_.scaling_factor_num[0] = 72;

+  cfg_.temporal_layering_mode = 3;

+  svc_params_.scaling_factor_num[0] = 144;

   svc_params_.scaling_factor_den[0] = 288;

-  svc_params_.scaling_factor_num[1] = 144;

+  svc_params_.scaling_factor_num[1] = 288;

   svc_params_.scaling_factor_den[1] = 288;

-  svc_params_.scaling_factor_num[2] = 288;

-  svc_params_.scaling_factor_den[2] = 288;

   cfg_.rc_dropframe_thresh = 30;

   cfg_.kf_max_dist = 9999;

   number_spatial_layers_ = cfg_.ss_number_layers;

   number_temporal_layers_ = cfg_.ts_number_layers;

-  // Change SVC pattern on the fly.

-  update_pattern_ = 1;

   ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,

                                        0, 400);

   top_sl_width_ = 640;

   top_sl_height_ = 480;

-  cfg_.rc_target_bitrate = 800;

+  const int bitrates[3] = { 200, 400, 600 };

+  // TODO(marpan): Check that effective_datarate for each layer hits the

+  // layer target_bitrate.

+  cfg_.rc_target_bitrate = bitrates[GET_PARAM(2)];

   ResetModel();

   AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,

                       cfg_.ts_number_layers, cfg_.temporal_layering_mode,

@@ -749,7 +781,7 @@

                       layer_target_avg_bandwidth_, bits_in_buffer_model_);

   ASSERT_NO_FATAL_FAILURE(RunLoop(&video));

   CheckLayerRateTargeting(&cfg_, number_spatial_layers_,

-                          number_temporal_layers_, file_datarate_, 0.78, 1.15);

+                          number_temporal_layers_, file_datarate_, 0.75, 1.2);

 #if CONFIG_VP9_DECODER

   // The non-reference frames are expected to be mismatched frames as the

   // encoder will avoid loopfilter on these frames.

@@ -757,11 +789,29 @@

 #endif

 }

-// Check basic rate targeting for 1 pass CBR SVC with 3 spatial layers and on

-// the fly switching to 1 and then 2 and back to 3 spatial layers. This switch

-// is done by setting spatial layer bitrates to 0, and then back to non-zero,

-// during the sequence.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL_DisableEnableLayers) {

+// Params: speed setting, layer framedrop control and index for bitrate array.

+class DatarateOnePassCbrSvcFrameDropMultiBR

+    : public DatarateOnePassCbrSvc,

+      public ::libvpx_test::CodecTestWith3Params<int, int, int> {

+ public:

+  DatarateOnePassCbrSvcFrameDropMultiBR()

+      : DatarateOnePassCbrSvc(GET_PARAM(0)) {

+    memset(&svc_params_, 0, sizeof(svc_params_));

+  }

+  virtual ~DatarateOnePassCbrSvcFrameDropMultiBR() {}

+

+ protected:

+  virtual void SetUp() {

+    InitializeConfig();

+    SetMode(::libvpx_test::kRealTime);

+    speed_setting_ = GET_PARAM(1);

+    ResetModel();

+  }

+};

+

+// Check basic rate targeting for 1 pass CBR SVC: 2 spatial layers and

+// 3 temporal layers. Run HD clip with 4 threads.

+TEST_P(DatarateOnePassCbrSvcFrameDropMultiBR, OnePassCbrSvc2SL3TL4Threads) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -769,37 +819,36 @@

   cfg_.rc_max_quantizer = 63;

   cfg_.rc_end_usage = VPX_CBR;

   cfg_.g_lag_in_frames = 0;

-  cfg_.ss_number_layers = 3;

-  cfg_.ts_number_layers = 1;

-  cfg_.ts_rate_decimator[0] = 1;

+  cfg_.ss_number_layers = 2;

+  cfg_.ts_number_layers = 3;

+  cfg_.ts_rate_decimator[0] = 4;

+  cfg_.ts_rate_decimator[1] = 2;

+  cfg_.ts_rate_decimator[2] = 1;

   cfg_.g_error_resilient = 1;

-  cfg_.g_threads = 1;

-  cfg_.temporal_layering_mode = 0;

-  svc_params_.scaling_factor_num[0] = 72;

+  cfg_.g_threads = 4;

+  cfg_.temporal_layering_mode = 3;

+  svc_params_.scaling_factor_num[0] = 144;

   svc_params_.scaling_factor_den[0] = 288;

-  svc_params_.scaling_factor_num[1] = 144;

+  svc_params_.scaling_factor_num[1] = 288;

   svc_params_.scaling_factor_den[1] = 288;

-  svc_params_.scaling_factor_num[2] = 288;

-  svc_params_.scaling_factor_den[2] = 288;

   cfg_.rc_dropframe_thresh = 30;

   cfg_.kf_max_dist = 9999;

   number_spatial_layers_ = cfg_.ss_number_layers;

   number_temporal_layers_ = cfg_.ts_number_layers;

-  ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,

-                                       0, 400);

-  top_sl_width_ = 640;

-  top_sl_height_ = 480;

-  cfg_.rc_target_bitrate = 800;

+  ::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 60);

+  top_sl_width_ = 1280;

+  top_sl_height_ = 720;

+  layer_framedrop_ = 0;

+  const int bitrates[3] = { 200, 400, 600 };

+  cfg_.rc_target_bitrate = bitrates[GET_PARAM(3)];

   ResetModel();

-  dynamic_drop_layer_ = true;

+  layer_framedrop_ = GET_PARAM(2);

   AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,

                       cfg_.ts_number_layers, cfg_.temporal_layering_mode,

                       layer_target_avg_bandwidth_, bits_in_buffer_model_);

   ASSERT_NO_FATAL_FAILURE(RunLoop(&video));

-  // Don't check rate targeting on top spatial layer since it will be skipped

-  // for part of the sequence.

-  CheckLayerRateTargeting(&cfg_, number_spatial_layers_ - 1,

-                          number_temporal_layers_, file_datarate_, 0.78, 1.15);

+  CheckLayerRateTargeting(&cfg_, number_spatial_layers_,

+                          number_temporal_layers_, file_datarate_, 0.75, 1.2);

 #if CONFIG_VP9_DECODER

   // The non-reference frames are expected to be mismatched frames as the

   // encoder will avoid loopfilter on these frames.

@@ -809,7 +858,7 @@

 // Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and

 // 3 temporal layers. Run HD clip with 4 threads.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc3SL3TL4Threads) {

+TEST_P(DatarateOnePassCbrSvcFrameDropMultiBR, OnePassCbrSvc3SL3TL4Threads) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -858,7 +907,7 @@

 // Run SVC encoder for 1 temporal layer, 2 spatial layers, with spatial

 // downscale 5x5.

-TEST_P(DatarateOnePassCbrSvc, OnePassCbrSvc2SL1TL5x5MultipleRuns) {

+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc2SL1TL5x5MultipleRuns) {

   cfg_.rc_buf_initial_sz = 500;

   cfg_.rc_buf_optimal_sz = 500;

   cfg_.rc_buf_sz = 1000;

@@ -908,9 +957,22 @@

 #if CONFIG_VP9_TEMPORAL_DENOISING

 // Params: speed setting, noise sensitivity and index for bitrate array.

-class DatarateOnePassCbrSvcDenoiser : public DatarateOnePassCbrSvc {

+class DatarateOnePassCbrSvcDenoiser

+    : public DatarateOnePassCbrSvc,

+      public ::libvpx_test::CodecTestWith3Params<int, int, int> {

  public:

+  DatarateOnePassCbrSvcDenoiser() : DatarateOnePassCbrSvc(GET_PARAM(0)) {

+    memset(&svc_params_, 0, sizeof(svc_params_));

+  }

   virtual ~DatarateOnePassCbrSvcDenoiser() {}

+

+ protected:

+  virtual void SetUp() {

+    InitializeConfig();

+    SetMode(::libvpx_test::kRealTime);

+    speed_setting_ = GET_PARAM(1);

+    ResetModel();

+  }

 };

 // Check basic rate targeting for 1 pass CBR SVC with denoising.

@@ -965,10 +1027,23 @@

 }

 #endif

-// Params: speed setting, key frame dist and index for bitrate array.

-class DatarateOnePassCbrSvcSmallKF : public DatarateOnePassCbrSvc {

+// Params: speed setting, key frame dist.

+class DatarateOnePassCbrSvcSmallKF

+    : public DatarateOnePassCbrSvc,

+      public ::libvpx_test::CodecTestWith2Params<int, int> {

  public:

+  DatarateOnePassCbrSvcSmallKF() : DatarateOnePassCbrSvc(GET_PARAM(0)) {

+    memset(&svc_params_, 0, sizeof(svc_params_));

+  }

   virtual ~DatarateOnePassCbrSvcSmallKF() {}

+

+ protected:

+  virtual void SetUp() {

+    InitializeConfig();

+    SetMode(::libvpx_test::kRealTime);

+    speed_setting_ = GET_PARAM(1);

+    ResetModel();

+  }

 };

 // Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and 3

@@ -1071,9 +1146,16 @@

 #endif

 }

-VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvc, ::testing::Range(5, 9),

-                          ::testing::Range(0, 2), ::testing::Range(0, 3));

+VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcSingleBR,

+                          ::testing::Range(5, 9));

+VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcMultiBR, ::testing::Range(5, 9),

+                          ::testing::Range(0, 3));

+

+VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcFrameDropMultiBR,

+                          ::testing::Range(5, 9), ::testing::Range(0, 2),

+                          ::testing::Range(0, 3));

+

 #if CONFIG_VP9_TEMPORAL_DENOISING

 VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcDenoiser, ::testing::Range(5, 9),

                           ::testing::Range(1, 3), ::testing::Range(0, 3));

@@ -1080,5 +1162,5 @@

 #endif

 VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcSmallKF, ::testing::Range(5, 9),

-                          ::testing::Range(32, 36), ::testing::Range(0, 3));

+                          ::testing::Range(32, 36));

 }  // namespace