ref: 2614b77fcb415d37383fbd970bddc29785f7cc74
parent: 8bf2cbce9850c68bf58bc210ba8fff96a21d76ba
parent: b5ea2fbc2c1554769848774c836aad262af95072
author: John Koleszar <jkoleszar@google.com>
date: Mon Jul 18 20:05:11 EDT 2011
Merge remote branch 'origin/master' into experimental Change-Id: Ida9204624fe3fb99fed1b149d1f88159480fdd83
--- a/vp8/common/onyxd.h
+++ b/vp8/common/onyxd.h
@@ -18,6 +18,7 @@
extern "C"
{#endif
+#include "vpx/vpx_codec.h"
#include "type_aliases.h"
#include "vpx_scale/yv12config.h"
#include "ppflags.h"
--- a/vp8/encoder/firstpass.c
+++ b/vp8/encoder/firstpass.c
@@ -357,33 +357,58 @@
int max_bits;
// For CBR we need to also consider buffer fullness.
- // If we are running below the optimal level then we need to gradually tighten up on max_bits.
if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER)
{- double buffer_fullness_ratio = (double)cpi->buffer_level / DOUBLE_DIVIDE_CHECK((double)cpi->oxcf.optimal_buffer_level);
+ max_bits = 2 * cpi->av_per_frame_bandwidth;
+ max_bits -= cpi->buffered_av_per_frame_bandwidth;
+ max_bits *= ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0);
+ }
+ // VBR
+ else
+ {+ // For VBR base this on the bits and frames left plus the two_pass_vbrmax_section rate passed in by the user
+ max_bits = (int)(((double)cpi->twopass.bits_left / (cpi->twopass.total_stats->count - (double)cpi->common.current_video_frame)) * ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0));
+ }
- // For CBR base this on the target average bits per frame plus the maximum sedction rate passed in by the user
- max_bits = (int)(cpi->av_per_frame_bandwidth * ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0));
+ // Trap case where we are out of bits
+ if (max_bits < 0)
+ max_bits = 0;
- // If our buffer is below the optimum level
- if (buffer_fullness_ratio < 1.0)
- {- // The lower of max_bits / 4 or cpi->av_per_frame_bandwidth / 4.
- int min_max_bits = ((cpi->av_per_frame_bandwidth >> 2) < (max_bits >> 2)) ? cpi->av_per_frame_bandwidth >> 2 : max_bits >> 2;
+ return max_bits;
+}
- max_bits = (int)(max_bits * buffer_fullness_ratio);
- if (max_bits < min_max_bits)
- max_bits = min_max_bits; // Lowest value we will set ... which should allow the buffer to refil.
+static int gf_group_max_bits(VP8_COMP *cpi)
+{+ // Max allocation for a golden frame group
+ int max_bits;
+
+ // For CBR we need to also consider buffer fullness.
+ if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER)
+ {+ max_bits = cpi->av_per_frame_bandwidth * cpi->baseline_gf_interval;
+ if (max_bits > cpi->oxcf.optimal_buffer_level)
+ {+ max_bits -= cpi->oxcf.optimal_buffer_level;
+ max_bits += cpi->buffer_level;
}
+ else
+ {+ max_bits -= (cpi->buffered_av_per_frame_bandwidth
+ - cpi->av_per_frame_bandwidth)
+ * cpi->baseline_gf_interval;
+ }
+
+ max_bits *= ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0);
}
- // VBR
else
{// For VBR base this on the bits and frames left plus the two_pass_vbrmax_section rate passed in by the user
max_bits = (int)(((double)cpi->twopass.bits_left / (cpi->twopass.total_stats->count - (double)cpi->common.current_video_frame)) * ((double)cpi->oxcf.two_pass_vbrmax_section / 100.0));
+ max_bits *= cpi->baseline_gf_interval;
}
+
// Trap case where we are out of bits
if (max_bits < 0)
max_bits = 0;
@@ -1601,7 +1626,7 @@
double abs_mv_in_out_accumulator = 0.0;
double mod_err_per_mb_accumulator = 0.0;
- int max_bits = frame_max_bits(cpi); // Max for a single frame
+ int max_group_bits;
unsigned int allow_alt_ref =
cpi->oxcf.play_alternate && cpi->oxcf.lag_in_frames;
@@ -1963,8 +1988,9 @@
// Clip cpi->twopass.gf_group_bits based on user supplied data rate
// variability limit (cpi->oxcf.two_pass_vbrmax_section)
- if (cpi->twopass.gf_group_bits > max_bits * cpi->baseline_gf_interval)
- cpi->twopass.gf_group_bits = max_bits * cpi->baseline_gf_interval;
+ max_group_bits = gf_group_max_bits(cpi);
+ if (cpi->twopass.gf_group_bits > max_group_bits)
+ cpi->twopass.gf_group_bits = max_group_bits;
// Reset the file position
reset_fpf_position(cpi, start_pos);
@@ -2062,13 +2088,6 @@
{gf_bits = alt_gf_bits;
}
- }
-
- // Apply an additional limit for CBR
- if (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER)
- {- if (cpi->twopass.gf_bits > (cpi->buffer_level >> 1))
- cpi->twopass.gf_bits = cpi->buffer_level >> 1;
}
// Dont allow a negative value for gf_bits
--- a/vp8/encoder/onyx_if.c
+++ b/vp8/encoder/onyx_if.c
@@ -1524,6 +1524,7 @@
cpi->rolling_actual_bits = cpi->av_per_frame_bandwidth;
cpi->long_rolling_target_bits = cpi->av_per_frame_bandwidth;
cpi->long_rolling_actual_bits = cpi->av_per_frame_bandwidth;
+ cpi->buffered_av_per_frame_bandwidth = cpi->av_per_frame_bandwidth;
cpi->total_actual_bits = 0;
cpi->total_target_vs_actual = 0;
@@ -1619,7 +1620,7 @@
break;
}
- if (cpi->pass == 0)
+ if (cpi->pass == 0 && cpi->oxcf.end_usage != USAGE_STREAM_FROM_SERVER)
cpi->auto_worst_q = 1;
cpi->oxcf.worst_allowed_q = q_trans[oxcf->worst_allowed_q];
@@ -3262,6 +3263,116 @@
}
+
+static void update_buffer_level(VP8_COMP *cpi)
+{+ long long tmp;
+
+ /* Update the buffered average bitrate.
+ *
+ * The buffered average bitrate tracks the bitrate over the buffer
+ * window. Here we simulate taking a frame of average size out
+ * of the buffer, and putting in the new frame just encoded.
+ * It is calculated accordingly:
+ *
+ * A = Average Bits Per Frame In The Buffer
+ * P = New Frame Size
+ * N = Number of bits in the buffer
+ *
+ * We recalculate the average as so:
+ * (N-A)*A + A*P A * (N - A + P)
+ * A' = ------------- = ---------------
+ * N N
+ *
+ * This is modeled after a the standard algorithm for a moving
+ * average with fixed weighting (eg A' = ((N-1)*A + 1*P) / N). This makes
+ * the step response nonlinear but consistent with expected behavior --
+ * when A is large, the model adapts more quickly, since there are
+ * fewer frames in the buffer and conversely when A is small there
+ * will be more frames in the buffer so the average will adapt
+ * slowly.
+ *
+ * TODO(jkoleszar): This may give poor step response in some situations,
+ * for example motion following a long static section. It might be
+ * worth experimenting more with weighting by av_per_frame_bandwidth
+ * rather than buffered_av_per_frame_bandwidth or using a more accurate
+ * algorithm to get faster response. Current testing showed worse results
+ * with that setting though.
+ *
+ */
+
+ /* Guard against buffered_av_per_frame_bandwidth falling to 0. Should
+ * never happen, but without this check, it would be irrecoverable.
+ */
+ if(cpi->buffered_av_per_frame_bandwidth == 0)
+ cpi->buffered_av_per_frame_bandwidth = 1;
+
+ tmp = cpi->oxcf.maximum_buffer_size
+ - cpi->buffered_av_per_frame_bandwidth
+ + cpi->projected_frame_size;
+ tmp *= cpi->buffered_av_per_frame_bandwidth;
+ cpi->buffered_av_per_frame_bandwidth = tmp
+ / cpi->oxcf.maximum_buffer_size;
+
+ if(cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER)
+ {+ /* In CBR mode, buffer level is synthesized from the buffered
+ * average per-frame bandwidth to get the response characteristics
+ * of that model, rather than using the unbounded (wrt buffer size)
+ * bits_off_target. ie, the long term average bitrate doesn't
+ * matter in CBR mode. If the clip is consistently undershooting
+ * because it is very static, for example, you don't want to blow
+ * your short term bitrate budget trying to the the long term spend
+ * up to the target when you hit a motion section.
+ *
+ * Instead, the ratio of buffered_av_per_frame_bandwidth to the
+ * target av_per_frame_bandwidth is taken, scaled by
+ * maximum_buffer_size and centered around optimal_buffer_level,
+ * which presents the expected behavior of buffer_level for the other
+ * parts of the rate control code which handle the targeting.
+ *
+ * Note that this only happens after the starting_buffer_level
+ * has passed, to give the model a chance to stabilize.
+ */
+ if(cpi->total_actual_bits > cpi->oxcf.starting_buffer_level)
+ {+ tmp = (long long)cpi->buffered_av_per_frame_bandwidth
+ * cpi->oxcf.maximum_buffer_size
+ / cpi->av_per_frame_bandwidth;
+ cpi->buffer_level = cpi->oxcf.maximum_buffer_size
+ - tmp
+ + cpi->oxcf.optimal_buffer_level;
+ }
+ else
+ cpi->buffer_level = cpi->oxcf.optimal_buffer_level;
+
+ /* Accumulate recent overshoot error.
+ *
+ * If this frame is larger than the target, then accumulate
+ * that error to apply as a damping factor later. Only care about
+ * recent overshoot, so this value decays by (N-P)/N
+ */
+ if(cpi->total_actual_bits > cpi->oxcf.starting_buffer_level)
+ {+ long long decayed_overshoot;
+
+ decayed_overshoot = cpi->accumulated_overshoot;
+ decayed_overshoot *= (cpi->oxcf.maximum_buffer_size
+ - cpi->projected_frame_size);
+ decayed_overshoot /= cpi->oxcf.maximum_buffer_size;
+ cpi->accumulated_overshoot = decayed_overshoot;
+
+ cpi->accumulated_overshoot +=
+ (cpi->projected_frame_size > cpi->av_per_frame_bandwidth)
+ ? cpi->projected_frame_size - cpi->av_per_frame_bandwidth
+ : 0;
+ }
+ }
+ else
+ cpi->buffer_level = cpi->bits_off_target;
+}
+
+
static void encode_frame_to_data_rate
(
VP8_COMP *cpi,
@@ -3507,7 +3618,8 @@
// For CBR if the buffer reaches its maximum level then we can no longer
// save up bits for later frames so we might as well use them up
// on the current frame.
- if ((cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) &&
+ if (cpi->pass == 2
+ && (cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) &&
(cpi->buffer_level >= cpi->oxcf.optimal_buffer_level) && cpi->buffered_mode)
{int Adjustment = cpi->active_worst_quality / 4; // Max adjustment is 1/4
@@ -3598,6 +3710,10 @@
}
else
{+ if(cpi->pass != 2)
+ Q = cpi->auto_worst_q?
+ cpi->active_worst_quality:cpi->avg_frame_qindex;
+
cpi->active_best_quality = inter_minq[Q];
// For the constant/constrained quality mode we dont want
@@ -3910,15 +4026,17 @@
(cpi->active_worst_quality < cpi->worst_quality) &&
(cpi->projected_frame_size > frame_over_shoot_limit))
{- int over_size_percent = ((cpi->projected_frame_size - frame_over_shoot_limit) * 100) / frame_over_shoot_limit;
+ /* step down active_worst_quality such that the corresponding
+ * active_best_quality will be equal to the current
+ * active_worst_quality + 1. Once the limit on active_best_quality
+ * is reached, active_worst_quality will equal worst_quality.
+ */
+ int i;
- // If so is there any scope for relaxing it
- while ((cpi->active_worst_quality < cpi->worst_quality) && (over_size_percent > 0))
- {- cpi->active_worst_quality++;
- top_index = cpi->active_worst_quality;
- over_size_percent = (int)(over_size_percent * 0.96); // Assume 1 qstep = about 4% on frame size.
- }
+ for(i=cpi->active_worst_quality; i<cpi->worst_quality; i++)
+ if(inter_minq[i] >= cpi->active_worst_quality + 1)
+ break;
+ cpi->active_worst_quality = i;
// If we have updated the active max Q do not call vp8_update_rate_correction_factors() this loop.
active_worst_qchanged = TRUE;
@@ -4306,10 +4424,9 @@
// Update the buffer level variable.
// Non-viewable frames are a special case and are treated as pure overhead.
- if ( !cm->show_frame )
- cpi->bits_off_target -= cpi->projected_frame_size;
- else
- cpi->bits_off_target += cpi->av_per_frame_bandwidth - cpi->projected_frame_size;
+ if ( cm->show_frame )
+ cpi->bits_off_target += cpi->av_per_frame_bandwidth;
+ cpi->bits_off_target -= cpi->projected_frame_size;
// Rolling monitors of whether we are over or underspending used to help regulate min and Max Q in two pass.
cpi->rolling_target_bits = ((cpi->rolling_target_bits * 3) + cpi->this_frame_target + 2) / 4;
@@ -4323,7 +4440,7 @@
// Debug stats
cpi->total_target_vs_actual += (cpi->this_frame_target - cpi->projected_frame_size);
- cpi->buffer_level = cpi->bits_off_target;
+ update_buffer_level(cpi);
// Update bits left to the kf and gf groups to account for overshoot or undershoot on these frames
if (cm->frame_type == KEY_FRAME)
--- a/vp8/encoder/onyx_int.h
+++ b/vp8/encoder/onyx_int.h
@@ -348,6 +348,10 @@
int per_frame_bandwidth; // Current section per frame bandwidth target
int av_per_frame_bandwidth; // Average frame size target for clip
int min_frame_bandwidth; // Minimum allocation that should be used for any frame
+ int buffered_av_per_frame_bandwidth; // Average bitrate over the last buffer
+ int buffered_av_per_frame_bandwidth_rem; // Average bitrate remainder
+ int accumulated_overshoot; // Accumulated # of bits spent > target
+
int inter_frame_target;
double output_frame_rate;
long long last_time_stamp_seen;
--- a/vp8/encoder/ratectrl.c
+++ b/vp8/encoder/ratectrl.c
@@ -653,7 +653,7 @@
int min_frame_target;
int Adjustment;
- min_frame_target = 0;
+ min_frame_target = 1;
if (cpi->pass == 2)
{@@ -662,10 +662,12 @@
if (min_frame_target < (cpi->av_per_frame_bandwidth >> 5))
min_frame_target = cpi->av_per_frame_bandwidth >> 5;
}
- else if (min_frame_target < cpi->per_frame_bandwidth / 4)
- min_frame_target = cpi->per_frame_bandwidth / 4;
+ else
+ {+ if (min_frame_target < cpi->per_frame_bandwidth / 4)
+ min_frame_target = cpi->per_frame_bandwidth / 4;
+ }
-
// Special alt reference frame case
if (cpi->common.refresh_alt_ref_frame)
{@@ -1156,6 +1158,33 @@
cpi->current_gf_interval = cpi->frames_till_gf_update_due;
}
+ }
+
+ if (cpi->pass==0
+ && cpi->common.refresh_golden_frame
+ && cpi->oxcf.end_usage == USAGE_STREAM_FROM_SERVER) {+ long long adjust;
+
+ /*
+ frames_in_buffer = cpi->oxcf.maximum_buffer_size
+ / cpi->av_per_frame_bandwidth;
+ gf_in_buffer = frames_in_buffer /
+ cpi->frames_till_gf_update_due;
+ overshoot_per_gf = cpi->accumulated_overshoot / gf_in_buffer;
+
+ */
+
+ adjust = cpi->accumulated_overshoot;
+ adjust *= cpi->frames_till_gf_update_due + 1;
+ adjust *= cpi->av_per_frame_bandwidth;
+ adjust /= cpi->oxcf.maximum_buffer_size;
+
+ if (adjust > (cpi->this_frame_target - min_frame_target))
+ adjust = (cpi->this_frame_target - min_frame_target);
+ else if (adjust < 0)
+ adjust = 0;
+
+ cpi->this_frame_target -= adjust;
}
}
--- a/vpx/internal/vpx_codec_internal.h
+++ b/vpx/internal/vpx_codec_internal.h
@@ -45,6 +45,7 @@
#define VPX_CODEC_INTERNAL_H
#include "../vpx_decoder.h"
#include "../vpx_encoder.h"
+#include "vpx_config.h"
#include <stdarg.h>
@@ -435,6 +436,23 @@
#include <stdio.h>
#include <setjmp.h>
+
+/* GLIBC started intercepting calls to longjmp in version 2.11, if the
+ * FORTIFY_SOURCE flag is defined (it's defined by default on Ubuntu).
+ * This can cause problems running under older versions of GLIBC (ie,
+ * for binary distributions), so work around it by linking to the
+ * underlying longjmp call directly.
+ */
+#if defined(__GNUC_PREREQ)
+#if __GNUC_PREREQ (2,11)
+#if ARCH_X86_64
+__asm__(".symver __longjmp_chk,longjmp@GLIBC_2.2.5");+#else
+__asm__(".symver __longjmp_chk,longjmp@GLIBC_2.0");+#endif
+#endif
+#endif
+
struct vpx_internal_error_info
{vpx_codec_err_t error_code;
--- a/vpxenc.c
+++ b/vpxenc.c
@@ -1339,6 +1339,11 @@
* adjustment (5/4) to account for alt-refs
*/
hist->samples = cfg->rc_buf_sz * 5 / 4 * fps->num / fps->den / 1000;
+
+ // prevent division by zero
+ if (hist->samples == 0)
+ hist->samples=1;
+
hist->pts = calloc(hist->samples, sizeof(*hist->pts));
hist->sz = calloc(hist->samples, sizeof(*hist->sz));
for(i=0; i<RATE_BINS; i++)