ref: cc4ac997a0da6ea60e23ffb5f8c9361a3eebef32
dir: /rc/bin/ipconf/theworld/
#!/bin/rc fn initfn { dial/flush echo +++ echo -n atzh0 dial/expect -q -t 5 OK } fn dialfn { dial/flush echo -n atdt^$telno^ dial/expect -q -t 60 CONNECT } # process options for(i in $*){ switch($i){ case '-P' primary=-P } } switch($dev){ case '' dev=/dev/eia1 } switch($telno){ case '' telno=18009878722 } switch($baud){ case '' baud=115200 } { # set up uart if( test -e $dev^ctl ){ echo -n b^$baud echo -n m1 # cts/rts flow control echo -n q64000 # big buffer echo -n n1 # nonblocking writes echo -n r1 # rts on echo -n d1 # dtr on echo -n c1 # handup wen we lose dcd } > $dev^ctl # get the modem's attention while( ! initfn ) sleep 1 # dial while( ! dialfn ) sleep 30 echo connected to the world >[1=2] # start ppp ip/ppp $primary -f } < $dev > $dev # supply unknowns with outside addresses if( ! grep -s 'auth=' /net/ndb){ echo ' auth=204.178.31.3'>>/net/ndb echo ' authdom=cs.bell-labs.com'>>/net/ndb } if( ! grep -s 'ntp=' /net/ndb) echo ' ntp=204.178.31.2'>>/net/ndb if( ! grep -s 'dns=' /net/ndb){ echo ' dns=204.178.31.3'>>/net/ndb echo ' dns=204.178.31.4'>>/net/ndb } # start dns if it isn't already going if(! test -e /srv/dns ) ndb/dns -r