shithub: freetype+ttf2subf

Download patch

ref: a25e85ed95dc855e42e6bb55138e27d362c5ea1e
parent: 0d34386366c93835501e98d643586eb32dbda1fa
author: David Turner <david@freetype.org>
date: Tue Aug 17 11:20:25 EDT 2021

[gzip] Update sources to zlib 1.2.11

This can be tested by building with the Unix development build

  make setup devel
  make

or by building the freetype-demos programs with

  meson setup build -Dfreetype2:zlib=internal
  meson compile -C out

and trying to run `ftview` with a `.pcf.gz` font file.

* src/gzip/ftgzip.c, src/gzip/rules.mk: Update for new zlib sources.  Also
remove the temporary fix introduced in commit 6a431038 to work around the
fact that the internal sources were too old.

* src/gzip/README.freetype: New file describing the origin of the sources
and how they were modified.

* src/gzip/patches/*: Patch files applied to original sources.

* src/gzip/*: Updated zlib sources with the patch file(s) from
`src/gzip/patches/` applied, followed by a conversion with zlib's
`zlib2ansi` script.

git/fs: mount .git/fs: mount/attach disallowed diff: cannot open b/src/gzip/patches//null: file does not exist: 'b/src/gzip/patches//null'
binary files /dev/null b/src/gzip/README.freetype differ
--- a/src/gzip/adler32.c
+++ b/src/gzip/adler32.c
@@ -1,48 +1,192 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2002 Mark Adler
+ * Copyright (C) 1995-2011, 2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
-#include "zlib.h"
+#include "zutil.h"
 
-#define BASE 65521L /* largest prime smaller than 65536 */
+#ifndef Z_FREETYPE
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+#endif
+
+#define BASE 65521U     /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
 #define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
 #define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
+    do { \
+        unsigned long tmp = a >> 16; \
+        a &= 0xffffUL; \
+        a += (tmp << 4) - tmp; \
+    } while (0)
+#  define MOD28(a) \
+    do { \
+        CHOP(a); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD(a) \
+    do { \
+        CHOP(a); \
+        MOD28(a); \
+    } while (0)
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
+#endif
+
 /* ========================================================================= */
-ZEXPORT(uLong) adler32( /* adler, buf, len) */
+uLong ZEXPORT adler32_z(
     uLong adler,
     const Bytef *buf,
-    uInt len )
+    z_size_t len)
 {
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
+    unsigned long sum2;
+    unsigned n;
 
-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
 
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD28(sum2);            /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
             DO16(buf);
             buf += 16;
-            k -= 16;
         }
-        if (k != 0) do {
-            s1 += *buf++;
-            s2 += s1;
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
     }
-    return (s2 << 16) | s1;
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
 }
+
+/* ========================================================================= */
+uLong ZEXPORT adler32(
+    uLong adler,
+    const Bytef *buf,
+    uInt len)
+{
+    return adler32_z(adler, buf, len);
+}
+
+#ifndef Z_FREETYPE
+
+/* ========================================================================= */
+local uLong adler32_combine_(
+    uLong adler1,
+    uLong adler2,
+    z_off64_t len2)
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= ((unsigned long)BASE << 1)) sum2 -= ((unsigned long)BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(
+    uLong adler1,
+    uLong adler2,
+    z_off_t len2)
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(
+    uLong adler1,
+    uLong adler2,
+    z_off64_t len2)
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+#endif  /* !Z_FREETYPE */
--- /dev/null
+++ b/src/gzip/crc32.c
@@ -1,0 +1,444 @@
+/* crc32.c -- compute the CRC-32 of a data stream
+ * Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
+ * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
+ * tables for updating the shift register in one step with three exclusive-ors
+ * instead of four steps with four exclusive-ors.  This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ */
+
+/* @(#) $Id$ */
+
+/*
+  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+  protection on the static variables used to control the first-use generation
+  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+  first call get_crc_table() to initialize the tables before allowing more than
+  one thread to use crc32().
+
+  DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
+ */
+
+#ifdef MAKECRCH
+#  include <stdio.h>
+#  ifndef DYNAMIC_CRC_TABLE
+#    define DYNAMIC_CRC_TABLE
+#  endif /* !DYNAMIC_CRC_TABLE */
+#endif /* MAKECRCH */
+
+#include "zutil.h"      /* for STDC and FAR definitions */
+
+/* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+#  define BYFOUR
+#endif
+#ifdef BYFOUR
+   local unsigned long crc32_little OF((unsigned long,
+                        const unsigned char FAR *, z_size_t));
+   local unsigned long crc32_big OF((unsigned long,
+                        const unsigned char FAR *, z_size_t));
+#  define TBLS 8
+#else
+#  define TBLS 1
+#endif /* BYFOUR */
+
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+                                         unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
+
+
+#ifdef DYNAMIC_CRC_TABLE
+
+local volatile int crc_table_empty = 1;
+local z_crc_t FAR crc_table[TBLS][256];
+local void make_crc_table OF((void));
+#ifdef MAKECRCH
+   local void write_table OF((FILE *, const z_crc_t FAR *));
+#endif /* MAKECRCH */
+/*
+  Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+  Polynomials over GF(2) are represented in binary, one bit per coefficient,
+  with the lowest powers in the most significant bit.  Then adding polynomials
+  is just exclusive-or, and multiplying a polynomial by x is a right shift by
+  one.  If we call the above polynomial p, and represent a byte as the
+  polynomial q, also with the lowest power in the most significant bit (so the
+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+  where a mod b means the remainder after dividing a by b.
+
+  This calculation is done using the shift-register method of multiplying and
+  taking the remainder.  The register is initialized to zero, and for each
+  incoming bit, x^32 is added mod p to the register if the bit is a one (where
+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+  x (which is shifting right by one and adding x^32 mod p if the bit shifted
+  out is a one).  We start with the highest power (least significant bit) of
+  q and repeat for all eight bits of q.
+
+  The first table is simply the CRC of all possible eight bit values.  This is
+  all the information needed to generate CRCs on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.  The remaining tables
+  allow for word-at-a-time CRC calculation for both big-endian and little-
+  endian machines, where a word is four bytes.
+*/
+local void make_crc_table()
+{
+    z_crc_t c;
+    int n, k;
+    z_crc_t poly;                       /* polynomial exclusive-or pattern */
+    /* terms of polynomial defining this crc (except x^32): */
+    static volatile int first = 1;      /* flag to limit concurrent making */
+    static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+    /* See if another task is already doing this (not thread-safe, but better
+       than nothing -- significantly reduces duration of vulnerability in
+       case the advice about DYNAMIC_CRC_TABLE is ignored) */
+    if (first) {
+        first = 0;
+
+        /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+        poly = 0;
+        for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+            poly |= (z_crc_t)1 << (31 - p[n]);
+
+        /* generate a crc for every 8-bit value */
+        for (n = 0; n < 256; n++) {
+            c = (z_crc_t)n;
+            for (k = 0; k < 8; k++)
+                c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+            crc_table[0][n] = c;
+        }
+
+#ifdef BYFOUR
+        /* generate crc for each value followed by one, two, and three zeros,
+           and then the byte reversal of those as well as the first table */
+        for (n = 0; n < 256; n++) {
+            c = crc_table[0][n];
+            crc_table[4][n] = ZSWAP32(c);
+            for (k = 1; k < 4; k++) {
+                c = crc_table[0][c & 0xff] ^ (c >> 8);
+                crc_table[k][n] = c;
+                crc_table[k + 4][n] = ZSWAP32(c);
+            }
+        }
+#endif /* BYFOUR */
+
+        crc_table_empty = 0;
+    }
+    else {      /* not first */
+        /* wait for the other guy to finish (not efficient, but rare) */
+        while (crc_table_empty)
+            ;
+    }
+
+#ifdef MAKECRCH
+    /* write out CRC tables to crc32.h */
+    {
+        FILE *out;
+
+        out = fopen("crc32.h", "w");
+        if (out == NULL) return;
+        fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
+        fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
+        fprintf(out, "local const z_crc_t FAR ");
+        fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
+        write_table(out, crc_table[0]);
+#  ifdef BYFOUR
+        fprintf(out, "#ifdef BYFOUR\n");
+        for (k = 1; k < 8; k++) {
+            fprintf(out, "  },\n  {\n");
+            write_table(out, crc_table[k]);
+        }
+        fprintf(out, "#endif\n");
+#  endif /* BYFOUR */
+        fprintf(out, "  }\n};\n");
+        fclose(out);
+    }
+#endif /* MAKECRCH */
+}
+
+#ifdef MAKECRCH
+local void write_table(
+    FILE *out,
+    const z_crc_t FAR *table)
+{
+    int n;
+
+    for (n = 0; n < 256; n++)
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ",
+                (unsigned long)(table[n]),
+                n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
+}
+#endif /* MAKECRCH */
+
+#else /* !DYNAMIC_CRC_TABLE */
+/* ========================================================================
+ * Tables of CRC-32s of all single-byte values, made by make_crc_table().
+ */
+#include "crc32.h"
+#endif /* DYNAMIC_CRC_TABLE */
+
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const z_crc_t FAR * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+    return (const z_crc_t FAR *)crc_table;
+}
+
+/* ========================================================================= */
+#undef DO1
+#undef DO8
+#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32_z(
+    unsigned long crc,
+    const unsigned char FAR *buf,
+    z_size_t len)
+{
+    if (buf == Z_NULL) return 0UL;
+
+#ifdef DYNAMIC_CRC_TABLE
+    if (crc_table_empty)
+        make_crc_table();
+#endif /* DYNAMIC_CRC_TABLE */
+
+#ifdef BYFOUR
+    if (sizeof(void *) == sizeof(ptrdiff_t)) {
+        z_crc_t endian;
+
+        endian = 1;
+        if (*((unsigned char *)(&endian)))
+            return crc32_little(crc, buf, len);
+        else
+            return crc32_big(crc, buf, len);
+    }
+#endif /* BYFOUR */
+    crc = crc ^ 0xffffffffUL;
+    while (len >= 8) {
+        DO8;
+        len -= 8;
+    }
+    if (len) do {
+        DO1;
+    } while (--len);
+    return crc ^ 0xffffffffUL;
+}
+
+/* ========================================================================= */
+unsigned long ZEXPORT crc32(
+    unsigned long crc,
+    const unsigned char FAR *buf,
+    uInt len)
+{
+    return crc32_z(crc, buf, len);
+}
+
+#ifdef BYFOUR
+
+/*
+   This BYFOUR code accesses the passed unsigned char * buffer with a 32-bit
+   integer pointer type. This violates the strict aliasing rule, where a
+   compiler can assume, for optimization purposes, that two pointers to
+   fundamentally different types won't ever point to the same memory. This can
+   manifest as a problem only if one of the pointers is written to. This code
+   only reads from those pointers. So long as this code remains isolated in
+   this compilation unit, there won't be a problem. For this reason, this code
+   should not be copied and pasted into a compilation unit in which other code
+   writes to the buffer that is passed to these routines.
+ */
+
+/* ========================================================================= */
+#define DOLIT4 c ^= *buf4++; \
+        c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \
+            crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24]
+#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4
+
+/* ========================================================================= */
+local unsigned long crc32_little(
+    unsigned long crc,
+    const unsigned char FAR *buf,
+    z_size_t len)
+{
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
+
+    c = (z_crc_t)crc;
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+        len--;
+    }
+
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOLIT32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOLIT4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)c;
+}
+
+/* ========================================================================= */
+#define DOBIG4 c ^= *buf4++; \
+        c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \
+            crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24]
+#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4
+
+/* ========================================================================= */
+local unsigned long crc32_big(
+    unsigned long crc,
+    const unsigned char FAR *buf,
+    z_size_t len)
+{
+    register z_crc_t c;
+    register const z_crc_t FAR *buf4;
+
+    c = ZSWAP32((z_crc_t)crc);
+    c = ~c;
+    while (len && ((ptrdiff_t)buf & 3)) {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+        len--;
+    }
+
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
+    while (len >= 32) {
+        DOBIG32;
+        len -= 32;
+    }
+    while (len >= 4) {
+        DOBIG4;
+        len -= 4;
+    }
+    buf = (const unsigned char FAR *)buf4;
+
+    if (len) do {
+        c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
+    } while (--len);
+    c = ~c;
+    return (unsigned long)(ZSWAP32(c));
+}
+
+#endif /* BYFOUR */
+
+#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(
+    unsigned long *mat,
+    unsigned long vec)
+{
+    unsigned long sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(
+    unsigned long *square,
+    unsigned long *mat)
+{
+    int n;
+
+    for (n = 0; n < GF2_DIM; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(
+    uLong crc1,
+    uLong crc2,
+    z_off64_t len2)
+{
+    int n;
+    unsigned long row;
+    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
+    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
+
+    /* degenerate case (also disallow negative lengths) */
+    if (len2 <= 0)
+        return crc1;
+
+    /* put operator for one zero bit in odd */
+    odd[0] = 0xedb88320UL;          /* CRC-32 polynomial */
+    row = 1;
+    for (n = 1; n < GF2_DIM; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* apply len2 zeros to crc1 (first square will put the operator for one
+       zero byte, eight zero bits, in even) */
+    do {
+        /* apply zeros operator for this bit of len2 */
+        gf2_matrix_square(even, odd);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(even, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+        if (len2 == 0)
+            break;
+
+        /* another iteration of the loop with odd and even swapped */
+        gf2_matrix_square(odd, even);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(odd, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+    } while (len2 != 0);
+
+    /* return combined crc */
+    crc1 ^= crc2;
+    return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(
+    uLong crc1,
+    uLong crc2,
+    z_off_t len2)
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
+
+uLong ZEXPORT crc32_combine64(
+    uLong crc1,
+    uLong crc2,
+    z_off64_t len2)
+{
+    return crc32_combine_(crc1, crc2, len2);
+}
--- /dev/null
+++ b/src/gzip/crc32.h
@@ -1,0 +1,441 @@
+/* crc32.h -- tables for rapid CRC calculation
+ * Generated automatically by crc32.c
+ */
+
+local const z_crc_t FAR crc_table[TBLS][256] =
+{
+  {
+    0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,
+    0x706af48fUL, 0xe963a535UL, 0x9e6495a3UL, 0x0edb8832UL, 0x79dcb8a4UL,
+    0xe0d5e91eUL, 0x97d2d988UL, 0x09b64c2bUL, 0x7eb17cbdUL, 0xe7b82d07UL,
+    0x90bf1d91UL, 0x1db71064UL, 0x6ab020f2UL, 0xf3b97148UL, 0x84be41deUL,
+    0x1adad47dUL, 0x6ddde4ebUL, 0xf4d4b551UL, 0x83d385c7UL, 0x136c9856UL,
+    0x646ba8c0UL, 0xfd62f97aUL, 0x8a65c9ecUL, 0x14015c4fUL, 0x63066cd9UL,
+    0xfa0f3d63UL, 0x8d080df5UL, 0x3b6e20c8UL, 0x4c69105eUL, 0xd56041e4UL,
+    0xa2677172UL, 0x3c03e4d1UL, 0x4b04d447UL, 0xd20d85fdUL, 0xa50ab56bUL,
+    0x35b5a8faUL, 0x42b2986cUL, 0xdbbbc9d6UL, 0xacbcf940UL, 0x32d86ce3UL,
+    0x45df5c75UL, 0xdcd60dcfUL, 0xabd13d59UL, 0x26d930acUL, 0x51de003aUL,
+    0xc8d75180UL, 0xbfd06116UL, 0x21b4f4b5UL, 0x56b3c423UL, 0xcfba9599UL,
+    0xb8bda50fUL, 0x2802b89eUL, 0x5f058808UL, 0xc60cd9b2UL, 0xb10be924UL,
+    0x2f6f7c87UL, 0x58684c11UL, 0xc1611dabUL, 0xb6662d3dUL, 0x76dc4190UL,
+    0x01db7106UL, 0x98d220bcUL, 0xefd5102aUL, 0x71b18589UL, 0x06b6b51fUL,
+    0x9fbfe4a5UL, 0xe8b8d433UL, 0x7807c9a2UL, 0x0f00f934UL, 0x9609a88eUL,
+    0xe10e9818UL, 0x7f6a0dbbUL, 0x086d3d2dUL, 0x91646c97UL, 0xe6635c01UL,
+    0x6b6b51f4UL, 0x1c6c6162UL, 0x856530d8UL, 0xf262004eUL, 0x6c0695edUL,
+    0x1b01a57bUL, 0x8208f4c1UL, 0xf50fc457UL, 0x65b0d9c6UL, 0x12b7e950UL,
+    0x8bbeb8eaUL, 0xfcb9887cUL, 0x62dd1ddfUL, 0x15da2d49UL, 0x8cd37cf3UL,
+    0xfbd44c65UL, 0x4db26158UL, 0x3ab551ceUL, 0xa3bc0074UL, 0xd4bb30e2UL,
+    0x4adfa541UL, 0x3dd895d7UL, 0xa4d1c46dUL, 0xd3d6f4fbUL, 0x4369e96aUL,
+    0x346ed9fcUL, 0xad678846UL, 0xda60b8d0UL, 0x44042d73UL, 0x33031de5UL,
+    0xaa0a4c5fUL, 0xdd0d7cc9UL, 0x5005713cUL, 0x270241aaUL, 0xbe0b1010UL,
+    0xc90c2086UL, 0x5768b525UL, 0x206f85b3UL, 0xb966d409UL, 0xce61e49fUL,
+    0x5edef90eUL, 0x29d9c998UL, 0xb0d09822UL, 0xc7d7a8b4UL, 0x59b33d17UL,
+    0x2eb40d81UL, 0xb7bd5c3bUL, 0xc0ba6cadUL, 0xedb88320UL, 0x9abfb3b6UL,
+    0x03b6e20cUL, 0x74b1d29aUL, 0xead54739UL, 0x9dd277afUL, 0x04db2615UL,
+    0x73dc1683UL, 0xe3630b12UL, 0x94643b84UL, 0x0d6d6a3eUL, 0x7a6a5aa8UL,
+    0xe40ecf0bUL, 0x9309ff9dUL, 0x0a00ae27UL, 0x7d079eb1UL, 0xf00f9344UL,
+    0x8708a3d2UL, 0x1e01f268UL, 0x6906c2feUL, 0xf762575dUL, 0x806567cbUL,
+    0x196c3671UL, 0x6e6b06e7UL, 0xfed41b76UL, 0x89d32be0UL, 0x10da7a5aUL,
+    0x67dd4accUL, 0xf9b9df6fUL, 0x8ebeeff9UL, 0x17b7be43UL, 0x60b08ed5UL,
+    0xd6d6a3e8UL, 0xa1d1937eUL, 0x38d8c2c4UL, 0x4fdff252UL, 0xd1bb67f1UL,
+    0xa6bc5767UL, 0x3fb506ddUL, 0x48b2364bUL, 0xd80d2bdaUL, 0xaf0a1b4cUL,
+    0x36034af6UL, 0x41047a60UL, 0xdf60efc3UL, 0xa867df55UL, 0x316e8eefUL,
+    0x4669be79UL, 0xcb61b38cUL, 0xbc66831aUL, 0x256fd2a0UL, 0x5268e236UL,
+    0xcc0c7795UL, 0xbb0b4703UL, 0x220216b9UL, 0x5505262fUL, 0xc5ba3bbeUL,
+    0xb2bd0b28UL, 0x2bb45a92UL, 0x5cb36a04UL, 0xc2d7ffa7UL, 0xb5d0cf31UL,
+    0x2cd99e8bUL, 0x5bdeae1dUL, 0x9b64c2b0UL, 0xec63f226UL, 0x756aa39cUL,
+    0x026d930aUL, 0x9c0906a9UL, 0xeb0e363fUL, 0x72076785UL, 0x05005713UL,
+    0x95bf4a82UL, 0xe2b87a14UL, 0x7bb12baeUL, 0x0cb61b38UL, 0x92d28e9bUL,
+    0xe5d5be0dUL, 0x7cdcefb7UL, 0x0bdbdf21UL, 0x86d3d2d4UL, 0xf1d4e242UL,
+    0x68ddb3f8UL, 0x1fda836eUL, 0x81be16cdUL, 0xf6b9265bUL, 0x6fb077e1UL,
+    0x18b74777UL, 0x88085ae6UL, 0xff0f6a70UL, 0x66063bcaUL, 0x11010b5cUL,
+    0x8f659effUL, 0xf862ae69UL, 0x616bffd3UL, 0x166ccf45UL, 0xa00ae278UL,
+    0xd70dd2eeUL, 0x4e048354UL, 0x3903b3c2UL, 0xa7672661UL, 0xd06016f7UL,
+    0x4969474dUL, 0x3e6e77dbUL, 0xaed16a4aUL, 0xd9d65adcUL, 0x40df0b66UL,
+    0x37d83bf0UL, 0xa9bcae53UL, 0xdebb9ec5UL, 0x47b2cf7fUL, 0x30b5ffe9UL,
+    0xbdbdf21cUL, 0xcabac28aUL, 0x53b39330UL, 0x24b4a3a6UL, 0xbad03605UL,
+    0xcdd70693UL, 0x54de5729UL, 0x23d967bfUL, 0xb3667a2eUL, 0xc4614ab8UL,
+    0x5d681b02UL, 0x2a6f2b94UL, 0xb40bbe37UL, 0xc30c8ea1UL, 0x5a05df1bUL,
+    0x2d02ef8dUL
+#ifdef BYFOUR
+  },
+  {
+    0x00000000UL, 0x191b3141UL, 0x32366282UL, 0x2b2d53c3UL, 0x646cc504UL,
+    0x7d77f445UL, 0x565aa786UL, 0x4f4196c7UL, 0xc8d98a08UL, 0xd1c2bb49UL,
+    0xfaefe88aUL, 0xe3f4d9cbUL, 0xacb54f0cUL, 0xb5ae7e4dUL, 0x9e832d8eUL,
+    0x87981ccfUL, 0x4ac21251UL, 0x53d92310UL, 0x78f470d3UL, 0x61ef4192UL,
+    0x2eaed755UL, 0x37b5e614UL, 0x1c98b5d7UL, 0x05838496UL, 0x821b9859UL,
+    0x9b00a918UL, 0xb02dfadbUL, 0xa936cb9aUL, 0xe6775d5dUL, 0xff6c6c1cUL,
+    0xd4413fdfUL, 0xcd5a0e9eUL, 0x958424a2UL, 0x8c9f15e3UL, 0xa7b24620UL,
+    0xbea97761UL, 0xf1e8e1a6UL, 0xe8f3d0e7UL, 0xc3de8324UL, 0xdac5b265UL,
+    0x5d5daeaaUL, 0x44469febUL, 0x6f6bcc28UL, 0x7670fd69UL, 0x39316baeUL,
+    0x202a5aefUL, 0x0b07092cUL, 0x121c386dUL, 0xdf4636f3UL, 0xc65d07b2UL,
+    0xed705471UL, 0xf46b6530UL, 0xbb2af3f7UL, 0xa231c2b6UL, 0x891c9175UL,
+    0x9007a034UL, 0x179fbcfbUL, 0x0e848dbaUL, 0x25a9de79UL, 0x3cb2ef38UL,
+    0x73f379ffUL, 0x6ae848beUL, 0x41c51b7dUL, 0x58de2a3cUL, 0xf0794f05UL,
+    0xe9627e44UL, 0xc24f2d87UL, 0xdb541cc6UL, 0x94158a01UL, 0x8d0ebb40UL,
+    0xa623e883UL, 0xbf38d9c2UL, 0x38a0c50dUL, 0x21bbf44cUL, 0x0a96a78fUL,
+    0x138d96ceUL, 0x5ccc0009UL, 0x45d73148UL, 0x6efa628bUL, 0x77e153caUL,
+    0xbabb5d54UL, 0xa3a06c15UL, 0x888d3fd6UL, 0x91960e97UL, 0xded79850UL,
+    0xc7cca911UL, 0xece1fad2UL, 0xf5facb93UL, 0x7262d75cUL, 0x6b79e61dUL,
+    0x4054b5deUL, 0x594f849fUL, 0x160e1258UL, 0x0f152319UL, 0x243870daUL,
+    0x3d23419bUL, 0x65fd6ba7UL, 0x7ce65ae6UL, 0x57cb0925UL, 0x4ed03864UL,
+    0x0191aea3UL, 0x188a9fe2UL, 0x33a7cc21UL, 0x2abcfd60UL, 0xad24e1afUL,
+    0xb43fd0eeUL, 0x9f12832dUL, 0x8609b26cUL, 0xc94824abUL, 0xd05315eaUL,
+    0xfb7e4629UL, 0xe2657768UL, 0x2f3f79f6UL, 0x362448b7UL, 0x1d091b74UL,
+    0x04122a35UL, 0x4b53bcf2UL, 0x52488db3UL, 0x7965de70UL, 0x607eef31UL,
+    0xe7e6f3feUL, 0xfefdc2bfUL, 0xd5d0917cUL, 0xcccba03dUL, 0x838a36faUL,
+    0x9a9107bbUL, 0xb1bc5478UL, 0xa8a76539UL, 0x3b83984bUL, 0x2298a90aUL,
+    0x09b5fac9UL, 0x10aecb88UL, 0x5fef5d4fUL, 0x46f46c0eUL, 0x6dd93fcdUL,
+    0x74c20e8cUL, 0xf35a1243UL, 0xea412302UL, 0xc16c70c1UL, 0xd8774180UL,
+    0x9736d747UL, 0x8e2de606UL, 0xa500b5c5UL, 0xbc1b8484UL, 0x71418a1aUL,
+    0x685abb5bUL, 0x4377e898UL, 0x5a6cd9d9UL, 0x152d4f1eUL, 0x0c367e5fUL,
+    0x271b2d9cUL, 0x3e001cddUL, 0xb9980012UL, 0xa0833153UL, 0x8bae6290UL,
+    0x92b553d1UL, 0xddf4c516UL, 0xc4eff457UL, 0xefc2a794UL, 0xf6d996d5UL,
+    0xae07bce9UL, 0xb71c8da8UL, 0x9c31de6bUL, 0x852aef2aUL, 0xca6b79edUL,
+    0xd37048acUL, 0xf85d1b6fUL, 0xe1462a2eUL, 0x66de36e1UL, 0x7fc507a0UL,
+    0x54e85463UL, 0x4df36522UL, 0x02b2f3e5UL, 0x1ba9c2a4UL, 0x30849167UL,
+    0x299fa026UL, 0xe4c5aeb8UL, 0xfdde9ff9UL, 0xd6f3cc3aUL, 0xcfe8fd7bUL,
+    0x80a96bbcUL, 0x99b25afdUL, 0xb29f093eUL, 0xab84387fUL, 0x2c1c24b0UL,
+    0x350715f1UL, 0x1e2a4632UL, 0x07317773UL, 0x4870e1b4UL, 0x516bd0f5UL,
+    0x7a468336UL, 0x635db277UL, 0xcbfad74eUL, 0xd2e1e60fUL, 0xf9ccb5ccUL,
+    0xe0d7848dUL, 0xaf96124aUL, 0xb68d230bUL, 0x9da070c8UL, 0x84bb4189UL,
+    0x03235d46UL, 0x1a386c07UL, 0x31153fc4UL, 0x280e0e85UL, 0x674f9842UL,
+    0x7e54a903UL, 0x5579fac0UL, 0x4c62cb81UL, 0x8138c51fUL, 0x9823f45eUL,
+    0xb30ea79dUL, 0xaa1596dcUL, 0xe554001bUL, 0xfc4f315aUL, 0xd7626299UL,
+    0xce7953d8UL, 0x49e14f17UL, 0x50fa7e56UL, 0x7bd72d95UL, 0x62cc1cd4UL,
+    0x2d8d8a13UL, 0x3496bb52UL, 0x1fbbe891UL, 0x06a0d9d0UL, 0x5e7ef3ecUL,
+    0x4765c2adUL, 0x6c48916eUL, 0x7553a02fUL, 0x3a1236e8UL, 0x230907a9UL,
+    0x0824546aUL, 0x113f652bUL, 0x96a779e4UL, 0x8fbc48a5UL, 0xa4911b66UL,
+    0xbd8a2a27UL, 0xf2cbbce0UL, 0xebd08da1UL, 0xc0fdde62UL, 0xd9e6ef23UL,
+    0x14bce1bdUL, 0x0da7d0fcUL, 0x268a833fUL, 0x3f91b27eUL, 0x70d024b9UL,
+    0x69cb15f8UL, 0x42e6463bUL, 0x5bfd777aUL, 0xdc656bb5UL, 0xc57e5af4UL,
+    0xee530937UL, 0xf7483876UL, 0xb809aeb1UL, 0xa1129ff0UL, 0x8a3fcc33UL,
+    0x9324fd72UL
+  },
+  {
+    0x00000000UL, 0x01c26a37UL, 0x0384d46eUL, 0x0246be59UL, 0x0709a8dcUL,
+    0x06cbc2ebUL, 0x048d7cb2UL, 0x054f1685UL, 0x0e1351b8UL, 0x0fd13b8fUL,
+    0x0d9785d6UL, 0x0c55efe1UL, 0x091af964UL, 0x08d89353UL, 0x0a9e2d0aUL,
+    0x0b5c473dUL, 0x1c26a370UL, 0x1de4c947UL, 0x1fa2771eUL, 0x1e601d29UL,
+    0x1b2f0bacUL, 0x1aed619bUL, 0x18abdfc2UL, 0x1969b5f5UL, 0x1235f2c8UL,
+    0x13f798ffUL, 0x11b126a6UL, 0x10734c91UL, 0x153c5a14UL, 0x14fe3023UL,
+    0x16b88e7aUL, 0x177ae44dUL, 0x384d46e0UL, 0x398f2cd7UL, 0x3bc9928eUL,
+    0x3a0bf8b9UL, 0x3f44ee3cUL, 0x3e86840bUL, 0x3cc03a52UL, 0x3d025065UL,
+    0x365e1758UL, 0x379c7d6fUL, 0x35dac336UL, 0x3418a901UL, 0x3157bf84UL,
+    0x3095d5b3UL, 0x32d36beaUL, 0x331101ddUL, 0x246be590UL, 0x25a98fa7UL,
+    0x27ef31feUL, 0x262d5bc9UL, 0x23624d4cUL, 0x22a0277bUL, 0x20e69922UL,
+    0x2124f315UL, 0x2a78b428UL, 0x2bbade1fUL, 0x29fc6046UL, 0x283e0a71UL,
+    0x2d711cf4UL, 0x2cb376c3UL, 0x2ef5c89aUL, 0x2f37a2adUL, 0x709a8dc0UL,
+    0x7158e7f7UL, 0x731e59aeUL, 0x72dc3399UL, 0x7793251cUL, 0x76514f2bUL,
+    0x7417f172UL, 0x75d59b45UL, 0x7e89dc78UL, 0x7f4bb64fUL, 0x7d0d0816UL,
+    0x7ccf6221UL, 0x798074a4UL, 0x78421e93UL, 0x7a04a0caUL, 0x7bc6cafdUL,
+    0x6cbc2eb0UL, 0x6d7e4487UL, 0x6f38fadeUL, 0x6efa90e9UL, 0x6bb5866cUL,
+    0x6a77ec5bUL, 0x68315202UL, 0x69f33835UL, 0x62af7f08UL, 0x636d153fUL,
+    0x612bab66UL, 0x60e9c151UL, 0x65a6d7d4UL, 0x6464bde3UL, 0x662203baUL,
+    0x67e0698dUL, 0x48d7cb20UL, 0x4915a117UL, 0x4b531f4eUL, 0x4a917579UL,
+    0x4fde63fcUL, 0x4e1c09cbUL, 0x4c5ab792UL, 0x4d98dda5UL, 0x46c49a98UL,
+    0x4706f0afUL, 0x45404ef6UL, 0x448224c1UL, 0x41cd3244UL, 0x400f5873UL,
+    0x4249e62aUL, 0x438b8c1dUL, 0x54f16850UL, 0x55330267UL, 0x5775bc3eUL,
+    0x56b7d609UL, 0x53f8c08cUL, 0x523aaabbUL, 0x507c14e2UL, 0x51be7ed5UL,
+    0x5ae239e8UL, 0x5b2053dfUL, 0x5966ed86UL, 0x58a487b1UL, 0x5deb9134UL,
+    0x5c29fb03UL, 0x5e6f455aUL, 0x5fad2f6dUL, 0xe1351b80UL, 0xe0f771b7UL,
+    0xe2b1cfeeUL, 0xe373a5d9UL, 0xe63cb35cUL, 0xe7fed96bUL, 0xe5b86732UL,
+    0xe47a0d05UL, 0xef264a38UL, 0xeee4200fUL, 0xeca29e56UL, 0xed60f461UL,
+    0xe82fe2e4UL, 0xe9ed88d3UL, 0xebab368aUL, 0xea695cbdUL, 0xfd13b8f0UL,
+    0xfcd1d2c7UL, 0xfe976c9eUL, 0xff5506a9UL, 0xfa1a102cUL, 0xfbd87a1bUL,
+    0xf99ec442UL, 0xf85cae75UL, 0xf300e948UL, 0xf2c2837fUL, 0xf0843d26UL,
+    0xf1465711UL, 0xf4094194UL, 0xf5cb2ba3UL, 0xf78d95faUL, 0xf64fffcdUL,
+    0xd9785d60UL, 0xd8ba3757UL, 0xdafc890eUL, 0xdb3ee339UL, 0xde71f5bcUL,
+    0xdfb39f8bUL, 0xddf521d2UL, 0xdc374be5UL, 0xd76b0cd8UL, 0xd6a966efUL,
+    0xd4efd8b6UL, 0xd52db281UL, 0xd062a404UL, 0xd1a0ce33UL, 0xd3e6706aUL,
+    0xd2241a5dUL, 0xc55efe10UL, 0xc49c9427UL, 0xc6da2a7eUL, 0xc7184049UL,
+    0xc25756ccUL, 0xc3953cfbUL, 0xc1d382a2UL, 0xc011e895UL, 0xcb4dafa8UL,
+    0xca8fc59fUL, 0xc8c97bc6UL, 0xc90b11f1UL, 0xcc440774UL, 0xcd866d43UL,
+    0xcfc0d31aUL, 0xce02b92dUL, 0x91af9640UL, 0x906dfc77UL, 0x922b422eUL,
+    0x93e92819UL, 0x96a63e9cUL, 0x976454abUL, 0x9522eaf2UL, 0x94e080c5UL,
+    0x9fbcc7f8UL, 0x9e7eadcfUL, 0x9c381396UL, 0x9dfa79a1UL, 0x98b56f24UL,
+    0x99770513UL, 0x9b31bb4aUL, 0x9af3d17dUL, 0x8d893530UL, 0x8c4b5f07UL,
+    0x8e0de15eUL, 0x8fcf8b69UL, 0x8a809decUL, 0x8b42f7dbUL, 0x89044982UL,
+    0x88c623b5UL, 0x839a6488UL, 0x82580ebfUL, 0x801eb0e6UL, 0x81dcdad1UL,
+    0x8493cc54UL, 0x8551a663UL, 0x8717183aUL, 0x86d5720dUL, 0xa9e2d0a0UL,
+    0xa820ba97UL, 0xaa6604ceUL, 0xaba46ef9UL, 0xaeeb787cUL, 0xaf29124bUL,
+    0xad6fac12UL, 0xacadc625UL, 0xa7f18118UL, 0xa633eb2fUL, 0xa4755576UL,
+    0xa5b73f41UL, 0xa0f829c4UL, 0xa13a43f3UL, 0xa37cfdaaUL, 0xa2be979dUL,
+    0xb5c473d0UL, 0xb40619e7UL, 0xb640a7beUL, 0xb782cd89UL, 0xb2cddb0cUL,
+    0xb30fb13bUL, 0xb1490f62UL, 0xb08b6555UL, 0xbbd72268UL, 0xba15485fUL,
+    0xb853f606UL, 0xb9919c31UL, 0xbcde8ab4UL, 0xbd1ce083UL, 0xbf5a5edaUL,
+    0xbe9834edUL
+  },
+  {
+    0x00000000UL, 0xb8bc6765UL, 0xaa09c88bUL, 0x12b5afeeUL, 0x8f629757UL,
+    0x37def032UL, 0x256b5fdcUL, 0x9dd738b9UL, 0xc5b428efUL, 0x7d084f8aUL,
+    0x6fbde064UL, 0xd7018701UL, 0x4ad6bfb8UL, 0xf26ad8ddUL, 0xe0df7733UL,
+    0x58631056UL, 0x5019579fUL, 0xe8a530faUL, 0xfa109f14UL, 0x42acf871UL,
+    0xdf7bc0c8UL, 0x67c7a7adUL, 0x75720843UL, 0xcdce6f26UL, 0x95ad7f70UL,
+    0x2d111815UL, 0x3fa4b7fbUL, 0x8718d09eUL, 0x1acfe827UL, 0xa2738f42UL,
+    0xb0c620acUL, 0x087a47c9UL, 0xa032af3eUL, 0x188ec85bUL, 0x0a3b67b5UL,
+    0xb28700d0UL, 0x2f503869UL, 0x97ec5f0cUL, 0x8559f0e2UL, 0x3de59787UL,
+    0x658687d1UL, 0xdd3ae0b4UL, 0xcf8f4f5aUL, 0x7733283fUL, 0xeae41086UL,
+    0x525877e3UL, 0x40edd80dUL, 0xf851bf68UL, 0xf02bf8a1UL, 0x48979fc4UL,
+    0x5a22302aUL, 0xe29e574fUL, 0x7f496ff6UL, 0xc7f50893UL, 0xd540a77dUL,
+    0x6dfcc018UL, 0x359fd04eUL, 0x8d23b72bUL, 0x9f9618c5UL, 0x272a7fa0UL,
+    0xbafd4719UL, 0x0241207cUL, 0x10f48f92UL, 0xa848e8f7UL, 0x9b14583dUL,
+    0x23a83f58UL, 0x311d90b6UL, 0x89a1f7d3UL, 0x1476cf6aUL, 0xaccaa80fUL,
+    0xbe7f07e1UL, 0x06c36084UL, 0x5ea070d2UL, 0xe61c17b7UL, 0xf4a9b859UL,
+    0x4c15df3cUL, 0xd1c2e785UL, 0x697e80e0UL, 0x7bcb2f0eUL, 0xc377486bUL,
+    0xcb0d0fa2UL, 0x73b168c7UL, 0x6104c729UL, 0xd9b8a04cUL, 0x446f98f5UL,
+    0xfcd3ff90UL, 0xee66507eUL, 0x56da371bUL, 0x0eb9274dUL, 0xb6054028UL,
+    0xa4b0efc6UL, 0x1c0c88a3UL, 0x81dbb01aUL, 0x3967d77fUL, 0x2bd27891UL,
+    0x936e1ff4UL, 0x3b26f703UL, 0x839a9066UL, 0x912f3f88UL, 0x299358edUL,
+    0xb4446054UL, 0x0cf80731UL, 0x1e4da8dfUL, 0xa6f1cfbaUL, 0xfe92dfecUL,
+    0x462eb889UL, 0x549b1767UL, 0xec277002UL, 0x71f048bbUL, 0xc94c2fdeUL,
+    0xdbf98030UL, 0x6345e755UL, 0x6b3fa09cUL, 0xd383c7f9UL, 0xc1366817UL,
+    0x798a0f72UL, 0xe45d37cbUL, 0x5ce150aeUL, 0x4e54ff40UL, 0xf6e89825UL,
+    0xae8b8873UL, 0x1637ef16UL, 0x048240f8UL, 0xbc3e279dUL, 0x21e91f24UL,
+    0x99557841UL, 0x8be0d7afUL, 0x335cb0caUL, 0xed59b63bUL, 0x55e5d15eUL,
+    0x47507eb0UL, 0xffec19d5UL, 0x623b216cUL, 0xda874609UL, 0xc832e9e7UL,
+    0x708e8e82UL, 0x28ed9ed4UL, 0x9051f9b1UL, 0x82e4565fUL, 0x3a58313aUL,
+    0xa78f0983UL, 0x1f336ee6UL, 0x0d86c108UL, 0xb53aa66dUL, 0xbd40e1a4UL,
+    0x05fc86c1UL, 0x1749292fUL, 0xaff54e4aUL, 0x322276f3UL, 0x8a9e1196UL,
+    0x982bbe78UL, 0x2097d91dUL, 0x78f4c94bUL, 0xc048ae2eUL, 0xd2fd01c0UL,
+    0x6a4166a5UL, 0xf7965e1cUL, 0x4f2a3979UL, 0x5d9f9697UL, 0xe523f1f2UL,
+    0x4d6b1905UL, 0xf5d77e60UL, 0xe762d18eUL, 0x5fdeb6ebUL, 0xc2098e52UL,
+    0x7ab5e937UL, 0x680046d9UL, 0xd0bc21bcUL, 0x88df31eaUL, 0x3063568fUL,
+    0x22d6f961UL, 0x9a6a9e04UL, 0x07bda6bdUL, 0xbf01c1d8UL, 0xadb46e36UL,
+    0x15080953UL, 0x1d724e9aUL, 0xa5ce29ffUL, 0xb77b8611UL, 0x0fc7e174UL,
+    0x9210d9cdUL, 0x2aacbea8UL, 0x38191146UL, 0x80a57623UL, 0xd8c66675UL,
+    0x607a0110UL, 0x72cfaefeUL, 0xca73c99bUL, 0x57a4f122UL, 0xef189647UL,
+    0xfdad39a9UL, 0x45115eccUL, 0x764dee06UL, 0xcef18963UL, 0xdc44268dUL,
+    0x64f841e8UL, 0xf92f7951UL, 0x41931e34UL, 0x5326b1daUL, 0xeb9ad6bfUL,
+    0xb3f9c6e9UL, 0x0b45a18cUL, 0x19f00e62UL, 0xa14c6907UL, 0x3c9b51beUL,
+    0x842736dbUL, 0x96929935UL, 0x2e2efe50UL, 0x2654b999UL, 0x9ee8defcUL,
+    0x8c5d7112UL, 0x34e11677UL, 0xa9362eceUL, 0x118a49abUL, 0x033fe645UL,
+    0xbb838120UL, 0xe3e09176UL, 0x5b5cf613UL, 0x49e959fdUL, 0xf1553e98UL,
+    0x6c820621UL, 0xd43e6144UL, 0xc68bceaaUL, 0x7e37a9cfUL, 0xd67f4138UL,
+    0x6ec3265dUL, 0x7c7689b3UL, 0xc4caeed6UL, 0x591dd66fUL, 0xe1a1b10aUL,
+    0xf3141ee4UL, 0x4ba87981UL, 0x13cb69d7UL, 0xab770eb2UL, 0xb9c2a15cUL,
+    0x017ec639UL, 0x9ca9fe80UL, 0x241599e5UL, 0x36a0360bUL, 0x8e1c516eUL,
+    0x866616a7UL, 0x3eda71c2UL, 0x2c6fde2cUL, 0x94d3b949UL, 0x090481f0UL,
+    0xb1b8e695UL, 0xa30d497bUL, 0x1bb12e1eUL, 0x43d23e48UL, 0xfb6e592dUL,
+    0xe9dbf6c3UL, 0x516791a6UL, 0xccb0a91fUL, 0x740cce7aUL, 0x66b96194UL,
+    0xde0506f1UL
+  },
+  {
+    0x00000000UL, 0x96300777UL, 0x2c610eeeUL, 0xba510999UL, 0x19c46d07UL,
+    0x8ff46a70UL, 0x35a563e9UL, 0xa395649eUL, 0x3288db0eUL, 0xa4b8dc79UL,
+    0x1ee9d5e0UL, 0x88d9d297UL, 0x2b4cb609UL, 0xbd7cb17eUL, 0x072db8e7UL,
+    0x911dbf90UL, 0x6410b71dUL, 0xf220b06aUL, 0x4871b9f3UL, 0xde41be84UL,
+    0x7dd4da1aUL, 0xebe4dd6dUL, 0x51b5d4f4UL, 0xc785d383UL, 0x56986c13UL,
+    0xc0a86b64UL, 0x7af962fdUL, 0xecc9658aUL, 0x4f5c0114UL, 0xd96c0663UL,
+    0x633d0ffaUL, 0xf50d088dUL, 0xc8206e3bUL, 0x5e10694cUL, 0xe44160d5UL,
+    0x727167a2UL, 0xd1e4033cUL, 0x47d4044bUL, 0xfd850dd2UL, 0x6bb50aa5UL,
+    0xfaa8b535UL, 0x6c98b242UL, 0xd6c9bbdbUL, 0x40f9bcacUL, 0xe36cd832UL,
+    0x755cdf45UL, 0xcf0dd6dcUL, 0x593dd1abUL, 0xac30d926UL, 0x3a00de51UL,
+    0x8051d7c8UL, 0x1661d0bfUL, 0xb5f4b421UL, 0x23c4b356UL, 0x9995bacfUL,
+    0x0fa5bdb8UL, 0x9eb80228UL, 0x0888055fUL, 0xb2d90cc6UL, 0x24e90bb1UL,
+    0x877c6f2fUL, 0x114c6858UL, 0xab1d61c1UL, 0x3d2d66b6UL, 0x9041dc76UL,
+    0x0671db01UL, 0xbc20d298UL, 0x2a10d5efUL, 0x8985b171UL, 0x1fb5b606UL,
+    0xa5e4bf9fUL, 0x33d4b8e8UL, 0xa2c90778UL, 0x34f9000fUL, 0x8ea80996UL,
+    0x18980ee1UL, 0xbb0d6a7fUL, 0x2d3d6d08UL, 0x976c6491UL, 0x015c63e6UL,
+    0xf4516b6bUL, 0x62616c1cUL, 0xd8306585UL, 0x4e0062f2UL, 0xed95066cUL,
+    0x7ba5011bUL, 0xc1f40882UL, 0x57c40ff5UL, 0xc6d9b065UL, 0x50e9b712UL,
+    0xeab8be8bUL, 0x7c88b9fcUL, 0xdf1ddd62UL, 0x492dda15UL, 0xf37cd38cUL,
+    0x654cd4fbUL, 0x5861b24dUL, 0xce51b53aUL, 0x7400bca3UL, 0xe230bbd4UL,
+    0x41a5df4aUL, 0xd795d83dUL, 0x6dc4d1a4UL, 0xfbf4d6d3UL, 0x6ae96943UL,
+    0xfcd96e34UL, 0x468867adUL, 0xd0b860daUL, 0x732d0444UL, 0xe51d0333UL,
+    0x5f4c0aaaUL, 0xc97c0dddUL, 0x3c710550UL, 0xaa410227UL, 0x10100bbeUL,
+    0x86200cc9UL, 0x25b56857UL, 0xb3856f20UL, 0x09d466b9UL, 0x9fe461ceUL,
+    0x0ef9de5eUL, 0x98c9d929UL, 0x2298d0b0UL, 0xb4a8d7c7UL, 0x173db359UL,
+    0x810db42eUL, 0x3b5cbdb7UL, 0xad6cbac0UL, 0x2083b8edUL, 0xb6b3bf9aUL,
+    0x0ce2b603UL, 0x9ad2b174UL, 0x3947d5eaUL, 0xaf77d29dUL, 0x1526db04UL,
+    0x8316dc73UL, 0x120b63e3UL, 0x843b6494UL, 0x3e6a6d0dUL, 0xa85a6a7aUL,
+    0x0bcf0ee4UL, 0x9dff0993UL, 0x27ae000aUL, 0xb19e077dUL, 0x44930ff0UL,
+    0xd2a30887UL, 0x68f2011eUL, 0xfec20669UL, 0x5d5762f7UL, 0xcb676580UL,
+    0x71366c19UL, 0xe7066b6eUL, 0x761bd4feUL, 0xe02bd389UL, 0x5a7ada10UL,
+    0xcc4add67UL, 0x6fdfb9f9UL, 0xf9efbe8eUL, 0x43beb717UL, 0xd58eb060UL,
+    0xe8a3d6d6UL, 0x7e93d1a1UL, 0xc4c2d838UL, 0x52f2df4fUL, 0xf167bbd1UL,
+    0x6757bca6UL, 0xdd06b53fUL, 0x4b36b248UL, 0xda2b0dd8UL, 0x4c1b0aafUL,
+    0xf64a0336UL, 0x607a0441UL, 0xc3ef60dfUL, 0x55df67a8UL, 0xef8e6e31UL,
+    0x79be6946UL, 0x8cb361cbUL, 0x1a8366bcUL, 0xa0d26f25UL, 0x36e26852UL,
+    0x95770cccUL, 0x03470bbbUL, 0xb9160222UL, 0x2f260555UL, 0xbe3bbac5UL,
+    0x280bbdb2UL, 0x925ab42bUL, 0x046ab35cUL, 0xa7ffd7c2UL, 0x31cfd0b5UL,
+    0x8b9ed92cUL, 0x1daede5bUL, 0xb0c2649bUL, 0x26f263ecUL, 0x9ca36a75UL,
+    0x0a936d02UL, 0xa906099cUL, 0x3f360eebUL, 0x85670772UL, 0x13570005UL,
+    0x824abf95UL, 0x147ab8e2UL, 0xae2bb17bUL, 0x381bb60cUL, 0x9b8ed292UL,
+    0x0dbed5e5UL, 0xb7efdc7cUL, 0x21dfdb0bUL, 0xd4d2d386UL, 0x42e2d4f1UL,
+    0xf8b3dd68UL, 0x6e83da1fUL, 0xcd16be81UL, 0x5b26b9f6UL, 0xe177b06fUL,
+    0x7747b718UL, 0xe65a0888UL, 0x706a0fffUL, 0xca3b0666UL, 0x5c0b0111UL,
+    0xff9e658fUL, 0x69ae62f8UL, 0xd3ff6b61UL, 0x45cf6c16UL, 0x78e20aa0UL,
+    0xeed20dd7UL, 0x5483044eUL, 0xc2b30339UL, 0x612667a7UL, 0xf71660d0UL,
+    0x4d476949UL, 0xdb776e3eUL, 0x4a6ad1aeUL, 0xdc5ad6d9UL, 0x660bdf40UL,
+    0xf03bd837UL, 0x53aebca9UL, 0xc59ebbdeUL, 0x7fcfb247UL, 0xe9ffb530UL,
+    0x1cf2bdbdUL, 0x8ac2bacaUL, 0x3093b353UL, 0xa6a3b424UL, 0x0536d0baUL,
+    0x9306d7cdUL, 0x2957de54UL, 0xbf67d923UL, 0x2e7a66b3UL, 0xb84a61c4UL,
+    0x021b685dUL, 0x942b6f2aUL, 0x37be0bb4UL, 0xa18e0cc3UL, 0x1bdf055aUL,
+    0x8def022dUL
+  },
+  {
+    0x00000000UL, 0x41311b19UL, 0x82623632UL, 0xc3532d2bUL, 0x04c56c64UL,
+    0x45f4777dUL, 0x86a75a56UL, 0xc796414fUL, 0x088ad9c8UL, 0x49bbc2d1UL,
+    0x8ae8effaUL, 0xcbd9f4e3UL, 0x0c4fb5acUL, 0x4d7eaeb5UL, 0x8e2d839eUL,
+    0xcf1c9887UL, 0x5112c24aUL, 0x1023d953UL, 0xd370f478UL, 0x9241ef61UL,
+    0x55d7ae2eUL, 0x14e6b537UL, 0xd7b5981cUL, 0x96848305UL, 0x59981b82UL,
+    0x18a9009bUL, 0xdbfa2db0UL, 0x9acb36a9UL, 0x5d5d77e6UL, 0x1c6c6cffUL,
+    0xdf3f41d4UL, 0x9e0e5acdUL, 0xa2248495UL, 0xe3159f8cUL, 0x2046b2a7UL,
+    0x6177a9beUL, 0xa6e1e8f1UL, 0xe7d0f3e8UL, 0x2483dec3UL, 0x65b2c5daUL,
+    0xaaae5d5dUL, 0xeb9f4644UL, 0x28cc6b6fUL, 0x69fd7076UL, 0xae6b3139UL,
+    0xef5a2a20UL, 0x2c09070bUL, 0x6d381c12UL, 0xf33646dfUL, 0xb2075dc6UL,
+    0x715470edUL, 0x30656bf4UL, 0xf7f32abbUL, 0xb6c231a2UL, 0x75911c89UL,
+    0x34a00790UL, 0xfbbc9f17UL, 0xba8d840eUL, 0x79dea925UL, 0x38efb23cUL,
+    0xff79f373UL, 0xbe48e86aUL, 0x7d1bc541UL, 0x3c2ade58UL, 0x054f79f0UL,
+    0x447e62e9UL, 0x872d4fc2UL, 0xc61c54dbUL, 0x018a1594UL, 0x40bb0e8dUL,
+    0x83e823a6UL, 0xc2d938bfUL, 0x0dc5a038UL, 0x4cf4bb21UL, 0x8fa7960aUL,
+    0xce968d13UL, 0x0900cc5cUL, 0x4831d745UL, 0x8b62fa6eUL, 0xca53e177UL,
+    0x545dbbbaUL, 0x156ca0a3UL, 0xd63f8d88UL, 0x970e9691UL, 0x5098d7deUL,
+    0x11a9ccc7UL, 0xd2fae1ecUL, 0x93cbfaf5UL, 0x5cd76272UL, 0x1de6796bUL,
+    0xdeb55440UL, 0x9f844f59UL, 0x58120e16UL, 0x1923150fUL, 0xda703824UL,
+    0x9b41233dUL, 0xa76bfd65UL, 0xe65ae67cUL, 0x2509cb57UL, 0x6438d04eUL,
+    0xa3ae9101UL, 0xe29f8a18UL, 0x21cca733UL, 0x60fdbc2aUL, 0xafe124adUL,
+    0xeed03fb4UL, 0x2d83129fUL, 0x6cb20986UL, 0xab2448c9UL, 0xea1553d0UL,
+    0x29467efbUL, 0x687765e2UL, 0xf6793f2fUL, 0xb7482436UL, 0x741b091dUL,
+    0x352a1204UL, 0xf2bc534bUL, 0xb38d4852UL, 0x70de6579UL, 0x31ef7e60UL,
+    0xfef3e6e7UL, 0xbfc2fdfeUL, 0x7c91d0d5UL, 0x3da0cbccUL, 0xfa368a83UL,
+    0xbb07919aUL, 0x7854bcb1UL, 0x3965a7a8UL, 0x4b98833bUL, 0x0aa99822UL,
+    0xc9fab509UL, 0x88cbae10UL, 0x4f5def5fUL, 0x0e6cf446UL, 0xcd3fd96dUL,
+    0x8c0ec274UL, 0x43125af3UL, 0x022341eaUL, 0xc1706cc1UL, 0x804177d8UL,
+    0x47d73697UL, 0x06e62d8eUL, 0xc5b500a5UL, 0x84841bbcUL, 0x1a8a4171UL,
+    0x5bbb5a68UL, 0x98e87743UL, 0xd9d96c5aUL, 0x1e4f2d15UL, 0x5f7e360cUL,
+    0x9c2d1b27UL, 0xdd1c003eUL, 0x120098b9UL, 0x533183a0UL, 0x9062ae8bUL,
+    0xd153b592UL, 0x16c5f4ddUL, 0x57f4efc4UL, 0x94a7c2efUL, 0xd596d9f6UL,
+    0xe9bc07aeUL, 0xa88d1cb7UL, 0x6bde319cUL, 0x2aef2a85UL, 0xed796bcaUL,
+    0xac4870d3UL, 0x6f1b5df8UL, 0x2e2a46e1UL, 0xe136de66UL, 0xa007c57fUL,
+    0x6354e854UL, 0x2265f34dUL, 0xe5f3b202UL, 0xa4c2a91bUL, 0x67918430UL,
+    0x26a09f29UL, 0xb8aec5e4UL, 0xf99fdefdUL, 0x3accf3d6UL, 0x7bfde8cfUL,
+    0xbc6ba980UL, 0xfd5ab299UL, 0x3e099fb2UL, 0x7f3884abUL, 0xb0241c2cUL,
+    0xf1150735UL, 0x32462a1eUL, 0x73773107UL, 0xb4e17048UL, 0xf5d06b51UL,
+    0x3683467aUL, 0x77b25d63UL, 0x4ed7facbUL, 0x0fe6e1d2UL, 0xccb5ccf9UL,
+    0x8d84d7e0UL, 0x4a1296afUL, 0x0b238db6UL, 0xc870a09dUL, 0x8941bb84UL,
+    0x465d2303UL, 0x076c381aUL, 0xc43f1531UL, 0x850e0e28UL, 0x42984f67UL,
+    0x03a9547eUL, 0xc0fa7955UL, 0x81cb624cUL, 0x1fc53881UL, 0x5ef42398UL,
+    0x9da70eb3UL, 0xdc9615aaUL, 0x1b0054e5UL, 0x5a314ffcUL, 0x996262d7UL,
+    0xd85379ceUL, 0x174fe149UL, 0x567efa50UL, 0x952dd77bUL, 0xd41ccc62UL,
+    0x138a8d2dUL, 0x52bb9634UL, 0x91e8bb1fUL, 0xd0d9a006UL, 0xecf37e5eUL,
+    0xadc26547UL, 0x6e91486cUL, 0x2fa05375UL, 0xe836123aUL, 0xa9070923UL,
+    0x6a542408UL, 0x2b653f11UL, 0xe479a796UL, 0xa548bc8fUL, 0x661b91a4UL,
+    0x272a8abdUL, 0xe0bccbf2UL, 0xa18dd0ebUL, 0x62defdc0UL, 0x23efe6d9UL,
+    0xbde1bc14UL, 0xfcd0a70dUL, 0x3f838a26UL, 0x7eb2913fUL, 0xb924d070UL,
+    0xf815cb69UL, 0x3b46e642UL, 0x7a77fd5bUL, 0xb56b65dcUL, 0xf45a7ec5UL,
+    0x370953eeUL, 0x763848f7UL, 0xb1ae09b8UL, 0xf09f12a1UL, 0x33cc3f8aUL,
+    0x72fd2493UL
+  },
+  {
+    0x00000000UL, 0x376ac201UL, 0x6ed48403UL, 0x59be4602UL, 0xdca80907UL,
+    0xebc2cb06UL, 0xb27c8d04UL, 0x85164f05UL, 0xb851130eUL, 0x8f3bd10fUL,
+    0xd685970dUL, 0xe1ef550cUL, 0x64f91a09UL, 0x5393d808UL, 0x0a2d9e0aUL,
+    0x3d475c0bUL, 0x70a3261cUL, 0x47c9e41dUL, 0x1e77a21fUL, 0x291d601eUL,
+    0xac0b2f1bUL, 0x9b61ed1aUL, 0xc2dfab18UL, 0xf5b56919UL, 0xc8f23512UL,
+    0xff98f713UL, 0xa626b111UL, 0x914c7310UL, 0x145a3c15UL, 0x2330fe14UL,
+    0x7a8eb816UL, 0x4de47a17UL, 0xe0464d38UL, 0xd72c8f39UL, 0x8e92c93bUL,
+    0xb9f80b3aUL, 0x3cee443fUL, 0x0b84863eUL, 0x523ac03cUL, 0x6550023dUL,
+    0x58175e36UL, 0x6f7d9c37UL, 0x36c3da35UL, 0x01a91834UL, 0x84bf5731UL,
+    0xb3d59530UL, 0xea6bd332UL, 0xdd011133UL, 0x90e56b24UL, 0xa78fa925UL,
+    0xfe31ef27UL, 0xc95b2d26UL, 0x4c4d6223UL, 0x7b27a022UL, 0x2299e620UL,
+    0x15f32421UL, 0x28b4782aUL, 0x1fdeba2bUL, 0x4660fc29UL, 0x710a3e28UL,
+    0xf41c712dUL, 0xc376b32cUL, 0x9ac8f52eUL, 0xada2372fUL, 0xc08d9a70UL,
+    0xf7e75871UL, 0xae591e73UL, 0x9933dc72UL, 0x1c259377UL, 0x2b4f5176UL,
+    0x72f11774UL, 0x459bd575UL, 0x78dc897eUL, 0x4fb64b7fUL, 0x16080d7dUL,
+    0x2162cf7cUL, 0xa4748079UL, 0x931e4278UL, 0xcaa0047aUL, 0xfdcac67bUL,
+    0xb02ebc6cUL, 0x87447e6dUL, 0xdefa386fUL, 0xe990fa6eUL, 0x6c86b56bUL,
+    0x5bec776aUL, 0x02523168UL, 0x3538f369UL, 0x087faf62UL, 0x3f156d63UL,
+    0x66ab2b61UL, 0x51c1e960UL, 0xd4d7a665UL, 0xe3bd6464UL, 0xba032266UL,
+    0x8d69e067UL, 0x20cbd748UL, 0x17a11549UL, 0x4e1f534bUL, 0x7975914aUL,
+    0xfc63de4fUL, 0xcb091c4eUL, 0x92b75a4cUL, 0xa5dd984dUL, 0x989ac446UL,
+    0xaff00647UL, 0xf64e4045UL, 0xc1248244UL, 0x4432cd41UL, 0x73580f40UL,
+    0x2ae64942UL, 0x1d8c8b43UL, 0x5068f154UL, 0x67023355UL, 0x3ebc7557UL,
+    0x09d6b756UL, 0x8cc0f853UL, 0xbbaa3a52UL, 0xe2147c50UL, 0xd57ebe51UL,
+    0xe839e25aUL, 0xdf53205bUL, 0x86ed6659UL, 0xb187a458UL, 0x3491eb5dUL,
+    0x03fb295cUL, 0x5a456f5eUL, 0x6d2fad5fUL, 0x801b35e1UL, 0xb771f7e0UL,
+    0xeecfb1e2UL, 0xd9a573e3UL, 0x5cb33ce6UL, 0x6bd9fee7UL, 0x3267b8e5UL,
+    0x050d7ae4UL, 0x384a26efUL, 0x0f20e4eeUL, 0x569ea2ecUL, 0x61f460edUL,
+    0xe4e22fe8UL, 0xd388ede9UL, 0x8a36abebUL, 0xbd5c69eaUL, 0xf0b813fdUL,
+    0xc7d2d1fcUL, 0x9e6c97feUL, 0xa90655ffUL, 0x2c101afaUL, 0x1b7ad8fbUL,
+    0x42c49ef9UL, 0x75ae5cf8UL, 0x48e900f3UL, 0x7f83c2f2UL, 0x263d84f0UL,
+    0x115746f1UL, 0x944109f4UL, 0xa32bcbf5UL, 0xfa958df7UL, 0xcdff4ff6UL,
+    0x605d78d9UL, 0x5737bad8UL, 0x0e89fcdaUL, 0x39e33edbUL, 0xbcf571deUL,
+    0x8b9fb3dfUL, 0xd221f5ddUL, 0xe54b37dcUL, 0xd80c6bd7UL, 0xef66a9d6UL,
+    0xb6d8efd4UL, 0x81b22dd5UL, 0x04a462d0UL, 0x33cea0d1UL, 0x6a70e6d3UL,
+    0x5d1a24d2UL, 0x10fe5ec5UL, 0x27949cc4UL, 0x7e2adac6UL, 0x494018c7UL,
+    0xcc5657c2UL, 0xfb3c95c3UL, 0xa282d3c1UL, 0x95e811c0UL, 0xa8af4dcbUL,
+    0x9fc58fcaUL, 0xc67bc9c8UL, 0xf1110bc9UL, 0x740744ccUL, 0x436d86cdUL,
+    0x1ad3c0cfUL, 0x2db902ceUL, 0x4096af91UL, 0x77fc6d90UL, 0x2e422b92UL,
+    0x1928e993UL, 0x9c3ea696UL, 0xab546497UL, 0xf2ea2295UL, 0xc580e094UL,
+    0xf8c7bc9fUL, 0xcfad7e9eUL, 0x9613389cUL, 0xa179fa9dUL, 0x246fb598UL,
+    0x13057799UL, 0x4abb319bUL, 0x7dd1f39aUL, 0x3035898dUL, 0x075f4b8cUL,
+    0x5ee10d8eUL, 0x698bcf8fUL, 0xec9d808aUL, 0xdbf7428bUL, 0x82490489UL,
+    0xb523c688UL, 0x88649a83UL, 0xbf0e5882UL, 0xe6b01e80UL, 0xd1dadc81UL,
+    0x54cc9384UL, 0x63a65185UL, 0x3a181787UL, 0x0d72d586UL, 0xa0d0e2a9UL,
+    0x97ba20a8UL, 0xce0466aaUL, 0xf96ea4abUL, 0x7c78ebaeUL, 0x4b1229afUL,
+    0x12ac6fadUL, 0x25c6adacUL, 0x1881f1a7UL, 0x2feb33a6UL, 0x765575a4UL,
+    0x413fb7a5UL, 0xc429f8a0UL, 0xf3433aa1UL, 0xaafd7ca3UL, 0x9d97bea2UL,
+    0xd073c4b5UL, 0xe71906b4UL, 0xbea740b6UL, 0x89cd82b7UL, 0x0cdbcdb2UL,
+    0x3bb10fb3UL, 0x620f49b1UL, 0x55658bb0UL, 0x6822d7bbUL, 0x5f4815baUL,
+    0x06f653b8UL, 0x319c91b9UL, 0xb48adebcUL, 0x83e01cbdUL, 0xda5e5abfUL,
+    0xed3498beUL
+  },
+  {
+    0x00000000UL, 0x6567bcb8UL, 0x8bc809aaUL, 0xeeafb512UL, 0x5797628fUL,
+    0x32f0de37UL, 0xdc5f6b25UL, 0xb938d79dUL, 0xef28b4c5UL, 0x8a4f087dUL,
+    0x64e0bd6fUL, 0x018701d7UL, 0xb8bfd64aUL, 0xddd86af2UL, 0x3377dfe0UL,
+    0x56106358UL, 0x9f571950UL, 0xfa30a5e8UL, 0x149f10faUL, 0x71f8ac42UL,
+    0xc8c07bdfUL, 0xada7c767UL, 0x43087275UL, 0x266fcecdUL, 0x707fad95UL,
+    0x1518112dUL, 0xfbb7a43fUL, 0x9ed01887UL, 0x27e8cf1aUL, 0x428f73a2UL,
+    0xac20c6b0UL, 0xc9477a08UL, 0x3eaf32a0UL, 0x5bc88e18UL, 0xb5673b0aUL,
+    0xd00087b2UL, 0x6938502fUL, 0x0c5fec97UL, 0xe2f05985UL, 0x8797e53dUL,
+    0xd1878665UL, 0xb4e03addUL, 0x5a4f8fcfUL, 0x3f283377UL, 0x8610e4eaUL,
+    0xe3775852UL, 0x0dd8ed40UL, 0x68bf51f8UL, 0xa1f82bf0UL, 0xc49f9748UL,
+    0x2a30225aUL, 0x4f579ee2UL, 0xf66f497fUL, 0x9308f5c7UL, 0x7da740d5UL,
+    0x18c0fc6dUL, 0x4ed09f35UL, 0x2bb7238dUL, 0xc518969fUL, 0xa07f2a27UL,
+    0x1947fdbaUL, 0x7c204102UL, 0x928ff410UL, 0xf7e848a8UL, 0x3d58149bUL,
+    0x583fa823UL, 0xb6901d31UL, 0xd3f7a189UL, 0x6acf7614UL, 0x0fa8caacUL,
+    0xe1077fbeUL, 0x8460c306UL, 0xd270a05eUL, 0xb7171ce6UL, 0x59b8a9f4UL,
+    0x3cdf154cUL, 0x85e7c2d1UL, 0xe0807e69UL, 0x0e2fcb7bUL, 0x6b4877c3UL,
+    0xa20f0dcbUL, 0xc768b173UL, 0x29c70461UL, 0x4ca0b8d9UL, 0xf5986f44UL,
+    0x90ffd3fcUL, 0x7e5066eeUL, 0x1b37da56UL, 0x4d27b90eUL, 0x284005b6UL,
+    0xc6efb0a4UL, 0xa3880c1cUL, 0x1ab0db81UL, 0x7fd76739UL, 0x9178d22bUL,
+    0xf41f6e93UL, 0x03f7263bUL, 0x66909a83UL, 0x883f2f91UL, 0xed589329UL,
+    0x546044b4UL, 0x3107f80cUL, 0xdfa84d1eUL, 0xbacff1a6UL, 0xecdf92feUL,
+    0x89b82e46UL, 0x67179b54UL, 0x027027ecUL, 0xbb48f071UL, 0xde2f4cc9UL,
+    0x3080f9dbUL, 0x55e74563UL, 0x9ca03f6bUL, 0xf9c783d3UL, 0x176836c1UL,
+    0x720f8a79UL, 0xcb375de4UL, 0xae50e15cUL, 0x40ff544eUL, 0x2598e8f6UL,
+    0x73888baeUL, 0x16ef3716UL, 0xf8408204UL, 0x9d273ebcUL, 0x241fe921UL,
+    0x41785599UL, 0xafd7e08bUL, 0xcab05c33UL, 0x3bb659edUL, 0x5ed1e555UL,
+    0xb07e5047UL, 0xd519ecffUL, 0x6c213b62UL, 0x094687daUL, 0xe7e932c8UL,
+    0x828e8e70UL, 0xd49eed28UL, 0xb1f95190UL, 0x5f56e482UL, 0x3a31583aUL,
+    0x83098fa7UL, 0xe66e331fUL, 0x08c1860dUL, 0x6da63ab5UL, 0xa4e140bdUL,
+    0xc186fc05UL, 0x2f294917UL, 0x4a4ef5afUL, 0xf3762232UL, 0x96119e8aUL,
+    0x78be2b98UL, 0x1dd99720UL, 0x4bc9f478UL, 0x2eae48c0UL, 0xc001fdd2UL,
+    0xa566416aUL, 0x1c5e96f7UL, 0x79392a4fUL, 0x97969f5dUL, 0xf2f123e5UL,
+    0x05196b4dUL, 0x607ed7f5UL, 0x8ed162e7UL, 0xebb6de5fUL, 0x528e09c2UL,
+    0x37e9b57aUL, 0xd9460068UL, 0xbc21bcd0UL, 0xea31df88UL, 0x8f566330UL,
+    0x61f9d622UL, 0x049e6a9aUL, 0xbda6bd07UL, 0xd8c101bfUL, 0x366eb4adUL,
+    0x53090815UL, 0x9a4e721dUL, 0xff29cea5UL, 0x11867bb7UL, 0x74e1c70fUL,
+    0xcdd91092UL, 0xa8beac2aUL, 0x46111938UL, 0x2376a580UL, 0x7566c6d8UL,
+    0x10017a60UL, 0xfeaecf72UL, 0x9bc973caUL, 0x22f1a457UL, 0x479618efUL,
+    0xa939adfdUL, 0xcc5e1145UL, 0x06ee4d76UL, 0x6389f1ceUL, 0x8d2644dcUL,
+    0xe841f864UL, 0x51792ff9UL, 0x341e9341UL, 0xdab12653UL, 0xbfd69aebUL,
+    0xe9c6f9b3UL, 0x8ca1450bUL, 0x620ef019UL, 0x07694ca1UL, 0xbe519b3cUL,
+    0xdb362784UL, 0x35999296UL, 0x50fe2e2eUL, 0x99b95426UL, 0xfcdee89eUL,
+    0x12715d8cUL, 0x7716e134UL, 0xce2e36a9UL, 0xab498a11UL, 0x45e63f03UL,
+    0x208183bbUL, 0x7691e0e3UL, 0x13f65c5bUL, 0xfd59e949UL, 0x983e55f1UL,
+    0x2106826cUL, 0x44613ed4UL, 0xaace8bc6UL, 0xcfa9377eUL, 0x38417fd6UL,
+    0x5d26c36eUL, 0xb389767cUL, 0xd6eecac4UL, 0x6fd61d59UL, 0x0ab1a1e1UL,
+    0xe41e14f3UL, 0x8179a84bUL, 0xd769cb13UL, 0xb20e77abUL, 0x5ca1c2b9UL,
+    0x39c67e01UL, 0x80fea99cUL, 0xe5991524UL, 0x0b36a036UL, 0x6e511c8eUL,
+    0xa7166686UL, 0xc271da3eUL, 0x2cde6f2cUL, 0x49b9d394UL, 0xf0810409UL,
+    0x95e6b8b1UL, 0x7b490da3UL, 0x1e2eb11bUL, 0x483ed243UL, 0x2d596efbUL,
+    0xc3f6dbe9UL, 0xa6916751UL, 0x1fa9b0ccUL, 0x7ace0c74UL, 0x9461b966UL,
+    0xf10605deUL
+#endif
+  }
+};
--- a/src/gzip/ftgzip.c
+++ b/src/gzip/ftgzip.c
@@ -69,11 +69,22 @@
   /*                                                                   */
   /* so that configuration with `FT_CONFIG_OPTION_SYSTEM_ZLIB' might   */
   /* include the wrong `zconf.h' file, leading to errors.              */
-#include "zlib.h"
 
-#undef  SLOW
-#define SLOW  1  /* we can't use asm-optimized sources here! */
+  /* `HAVE_HIDDEN` should be defined if                                 */
+  /*                                                                    */
+  /*   __attribute__((visibility("hidden")))                            */
+  /*                                                                    */
+  /* is supported by the compiler, which prevents internal symbols from */
+  /* being exported by the library.                                     */
+#if defined( __GNUC__ ) ||  defined( __clang__ )
+#define HAVE_HIDDEN  1
+#define ZEXPORT
+#define ZEXTERN      static
+#endif
 
+#define Z_SOLO      1
+#define Z_FREETYPE  1
+
 #if defined( _MSC_VER )      /* Visual C++ (and Intel C++)   */
   /* We disable the warning `conversion from XXX to YYY,     */
   /* possible loss of data' in order to compile cleanly with */
@@ -83,25 +94,24 @@
 #pragma warning( disable : 4244 )
 #endif /* _MSC_VER */
 
-  /* Urgh.  `inflate_mask' must not be declared twice -- C++ doesn't like
-     this.  We temporarily disable it and load all necessary header files. */
-#define NO_INFLATE_MASK
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-#undef  NO_INFLATE_MASK
+#if defined( __GNUC__ )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#pragma GCC diagnostic ignored "-Wimplicit-fallthrough"
+#pragma GCC diagnostic ignored "-Wredundant-decls"
+#endif
 
-  /* infutil.c must be included before infcodes.c */
 #include "zutil.c"
-#include "inftrees.c"
-#include "infutil.c"
-#include "infcodes.c"
-#include "infblock.c"
+#include "inffast.c"
 #include "inflate.c"
+#include "inftrees.c"
 #include "adler32.c"
+#include "crc32.c"
 
+#if defined( __GNUC__ )
+#pragma GCC diagnostic pop
+#endif
+
 #if defined( _MSC_VER )
 #pragma warning( pop )
 #endif
@@ -150,7 +160,7 @@
 
 #if !defined( FT_CONFIG_OPTION_SYSTEM_ZLIB ) && !defined( USE_ZLIB_ZCALLOC )
 
-  local voidpf
+  voidpf ZLIB_INTERNAL
   zcalloc ( voidpf    opaque,
             unsigned  items,
             unsigned  size )
@@ -158,7 +168,8 @@
     return ft_gzip_alloc( opaque, items, size );
   }
 
-  local void
+
+  void ZLIB_INTERNAL
   zcfree( voidpf  opaque,
           voidpf  ptr )
   {
@@ -751,16 +762,7 @@
     stream.zfree  = ft_gzip_free;
     stream.opaque = memory;
 
-    /* This is a temporary fix and will be removed once the internal
-     * copy of zlib is updated to the newest version. The `|32' flag
-     * is only supported in the new versions of zlib to enable gzip
-     * encoded header.
-     */
-#ifdef FT_CONFIG_OPTION_SYSTEM_ZLIB
     err = inflateInit2( &stream, MAX_WBITS|32 );
-#else
-    err = inflateInit2( &stream, MAX_WBITS );
-#endif
 
     if ( err != Z_OK )
       return FT_THROW( Invalid_Argument );
--- a/src/gzip/ftzconf.h
+++ b/src/gzip/ftzconf.h
@@ -1,76 +1,197 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
-#ifndef _ZCONF_H
-#define _ZCONF_H
+#ifndef ZCONF_H
+#define ZCONF_H
 
 /*
  * If you *really* need a unique prefix for all types and library functions,
  * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
  */
-#ifdef Z_PREFIX
-#  define deflateInit_         z_deflateInit_
-#  define deflate              z_deflate
-#  define deflateEnd           z_deflateEnd
-#  define inflateInit_         z_inflateInit_
-#  define inflate              z_inflate
-#  define inflateEnd           z_inflateEnd
-#  define deflateInit2_        z_deflateInit2_
-#  define deflateSetDictionary z_deflateSetDictionary
-#  define deflateCopy          z_deflateCopy
-#  define deflateReset         z_deflateReset
-#  define deflateParams        z_deflateParams
-#  define inflateInit2_        z_inflateInit2_
-#  define inflateSetDictionary z_inflateSetDictionary
-#  define inflateSync          z_inflateSync
-#  define inflateSyncPoint     z_inflateSyncPoint
-#  define inflateReset         z_inflateReset
-#  define compress             z_compress
-#  define compress2            z_compress2
-#  define uncompress           z_uncompress
-#  define adler32              z_adler32
-#  define crc32                z_crc32
-#  define get_crc_table        z_get_crc_table
+#ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
 
-#  define Byte   z_Byte
-#  define uInt   z_uInt
-#  define uLong  z_uLong
-#  define Bytef  z_Bytef
-#  define charf  z_charf
-#  define intf   z_intf
-#  define uIntf  z_uIntf
-#  define uLongf z_uLongf
-#  define voidpf z_voidpf
-#  define voidp  z_voidp
-#endif
+/* all linked symbols and init macros */
+#  define _dist_code            z__dist_code
+#  define _length_code          z__length_code
+#  define _tr_align             z__tr_align
+#  define _tr_flush_bits        z__tr_flush_bits
+#  define _tr_flush_block       z__tr_flush_block
+#  define _tr_init              z__tr_init
+#  define _tr_stored_block      z__tr_stored_block
+#  define _tr_tally             z__tr_tally
+#  define adler32               z_adler32
+#  define adler32_combine       z_adler32_combine
+#  define adler32_combine64     z_adler32_combine64
+#  define adler32_z             z_adler32_z
+#  ifndef Z_SOLO
+#    define compress              z_compress
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
+#  define crc32                 z_crc32
+#  define crc32_combine         z_crc32_combine
+#  define crc32_combine64       z_crc32_combine64
+#  define crc32_z               z_crc32_z
+#  define deflate               z_deflate
+#  define deflateBound          z_deflateBound
+#  define deflateCopy           z_deflateCopy
+#  define deflateEnd            z_deflateEnd
+#  define deflateGetDictionary  z_deflateGetDictionary
+#  define deflateInit           z_deflateInit
+#  define deflateInit2          z_deflateInit2
+#  define deflateInit2_         z_deflateInit2_
+#  define deflateInit_          z_deflateInit_
+#  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
+#  define deflatePrime          z_deflatePrime
+#  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
+#  define deflateSetDictionary  z_deflateSetDictionary
+#  define deflateSetHeader      z_deflateSetHeader
+#  define deflateTune           z_deflateTune
+#  define deflate_copyright     z_deflate_copyright
+#  define get_crc_table         z_get_crc_table
+#  ifndef Z_SOLO
+#    define gz_error              z_gz_error
+#    define gz_intmax             z_gz_intmax
+#    define gz_strwinerror        z_gz_strwinerror
+#    define gzbuffer              z_gzbuffer
+#    define gzclearerr            z_gzclearerr
+#    define gzclose               z_gzclose
+#    define gzclose_r             z_gzclose_r
+#    define gzclose_w             z_gzclose_w
+#    define gzdirect              z_gzdirect
+#    define gzdopen               z_gzdopen
+#    define gzeof                 z_gzeof
+#    define gzerror               z_gzerror
+#    define gzflush               z_gzflush
+#    define gzfread               z_gzfread
+#    define gzfwrite              z_gzfwrite
+#    define gzgetc                z_gzgetc
+#    define gzgetc_               z_gzgetc_
+#    define gzgets                z_gzgets
+#    define gzoffset              z_gzoffset
+#    define gzoffset64            z_gzoffset64
+#    define gzopen                z_gzopen
+#    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
+#    define gzprintf              z_gzprintf
+#    define gzputc                z_gzputc
+#    define gzputs                z_gzputs
+#    define gzread                z_gzread
+#    define gzrewind              z_gzrewind
+#    define gzseek                z_gzseek
+#    define gzseek64              z_gzseek64
+#    define gzsetparams           z_gzsetparams
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzvprintf             z_gzvprintf
+#    define gzwrite               z_gzwrite
+#  endif
+#  define inflate               z_inflate
+#  define inflateBack           z_inflateBack
+#  define inflateBackEnd        z_inflateBackEnd
+#  define inflateBackInit       z_inflateBackInit
+#  define inflateBackInit_      z_inflateBackInit_
+#  define inflateCodesUsed      z_inflateCodesUsed
+#  define inflateCopy           z_inflateCopy
+#  define inflateEnd            z_inflateEnd
+#  define inflateGetDictionary  z_inflateGetDictionary
+#  define inflateGetHeader      z_inflateGetHeader
+#  define inflateInit           z_inflateInit
+#  define inflateInit2          z_inflateInit2
+#  define inflateInit2_         z_inflateInit2_
+#  define inflateInit_          z_inflateInit_
+#  define inflateMark           z_inflateMark
+#  define inflatePrime          z_inflatePrime
+#  define inflateReset          z_inflateReset
+#  define inflateReset2         z_inflateReset2
+#  define inflateResetKeep      z_inflateResetKeep
+#  define inflateSetDictionary  z_inflateSetDictionary
+#  define inflateSync           z_inflateSync
+#  define inflateSyncPoint      z_inflateSyncPoint
+#  define inflateUndermine      z_inflateUndermine
+#  define inflateValidate       z_inflateValidate
+#  define inflate_copyright     z_inflate_copyright
+#  define inflate_fast          z_inflate_fast
+#  define inflate_table         z_inflate_table
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#    define uncompress2           z_uncompress2
+#  endif
+#  define zError                z_zError
+#  ifndef Z_SOLO
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
+#  define zlibCompileFlags      z_zlibCompileFlags
+#  define zlibVersion           z_zlibVersion
 
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-#  define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-#  ifndef __32BIT__
-#    define __32BIT__
+/* all zlib typedefs in zlib.h and zconf.h */
+#  define Byte                  z_Byte
+#  define Bytef                 z_Bytef
+#  define alloc_func            z_alloc_func
+#  define charf                 z_charf
+#  define free_func             z_free_func
+#  ifndef Z_SOLO
+#    define gzFile                z_gzFile
 #  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
+#  define in_func               z_in_func
+#  define intf                  z_intf
+#  define out_func              z_out_func
+#  define uInt                  z_uInt
+#  define uIntf                 z_uIntf
+#  define uLong                 z_uLong
+#  define uLongf                z_uLongf
+#  define voidp                 z_voidp
+#  define voidpc                z_voidpc
+#  define voidpf                z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+#  define gz_header_s           z_gz_header_s
+#  define internal_state        z_internal_state
+
 #endif
+
 #if defined(__MSDOS__) && !defined(MSDOS)
 #  define MSDOS
 #endif
-
-/* WinCE doesn't have errno.h */
-#ifdef _WIN32_WCE
-#  define NO_ERRNO_H
+#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2)
+#  define OS2
 #endif
+#if defined(_WINDOWS) && !defined(WINDOWS)
+#  define WINDOWS
+#endif
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+#  ifndef WIN32
+#    define WIN32
+#  endif
+#endif
+#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
+#  if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
+#    ifndef SYS16BIT
+#      define SYS16BIT
+#    endif
+#  endif
+#endif
 
-
 /*
  * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
  * than 64k bytes at a time (needed on systems with 16-bit int).
  */
-#if defined(MSDOS) && !defined(__32BIT__)
+#ifdef SYS16BIT
 #  define MAXSEG_64K
 #endif
 #ifdef MSDOS
@@ -77,35 +198,60 @@
 #  define UNALIGNED_OK
 #endif
 
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
-#  define STDC
-#endif
-#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
+#ifdef __STDC_VERSION__
 #  ifndef STDC
 #    define STDC
 #  endif
+#  if __STDC_VERSION__ >= 199901L
+#    ifndef STDC99
+#      define STDC99
+#    endif
+#  endif
 #endif
+#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32))
+#  define STDC
+#endif
+#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__))
+#  define STDC
+#endif
 
+#if defined(__OS400__) && !defined(STDC)    /* iSeries (formerly AS/400). */
+#  define STDC
+#endif
+
 #ifndef STDC
 #  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const
+#    define const       /* note: need a more gentle solution here */
 #  endif
 #endif
 
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-#  define NO_DUMMY_DECL
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
 #endif
 
-/* Old Borland C and LCC incorrectly complains about missing returns: */
-#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
-#  define NEED_DUMMY_RETURN
+#ifdef Z_SOLO
+   typedef unsigned long z_size_t;
+#else
+#  define z_longlong long long
+#  if defined(NO_SIZE_T)
+     typedef unsigned NO_SIZE_T z_size_t;
+#  elif defined(STDC)
+#    include <stddef.h>
+     typedef size_t z_size_t;
+#  else
+     typedef unsigned long z_size_t;
+#  endif
+#  undef z_longlong
 #endif
 
-#if defined(__LCC__)
-#  define  NEED_DUMMY_RETURN
-#endif
-
 /* Maximum value for memLevel in deflateInit2 */
 #ifndef MAX_MEM_LEVEL
 #  ifdef MAXSEG_64K
@@ -133,7 +279,7 @@
  Of course this will generally degrade compression (there's no free lunch).
 
    The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ that is, 32K for windowBits=15 (default value) plus about 7 kilobytes
  for small objects.
 */
 
@@ -147,6 +293,14 @@
 #  endif
 #endif
 
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
  * model programming (small or medium model with some far allocations).
  * This was tested only with MSC; for other MSDOS compilers you may have
@@ -153,69 +307,87 @@
  * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
  * just define FAR to be empty.
  */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
-   /* MSC small or medium model */
-#  define SMALL_MEDIUM
-#  ifdef _MSC_VER
-#    define FAR _far
-#  else
-#    define FAR far
+#ifdef SYS16BIT
+#  if defined(M_I86SM) || defined(M_I86MM)
+     /* MSC small or medium model */
+#    define SMALL_MEDIUM
+#    ifdef _MSC_VER
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
 #  endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-#  ifndef __32BIT__
+#  if (defined(__SMALL__) || defined(__MEDIUM__))
+     /* Turbo C small or medium model */
 #    define SMALL_MEDIUM
-#    define FAR _far
+#    ifdef __BORLANDC__
+#      define FAR _far
+#    else
+#      define FAR far
+#    endif
 #  endif
 #endif
 
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if defined(ZLIB_DLL)
-#  if defined(_WINDOWS) || defined(WINDOWS)
+#if defined(WINDOWS) || defined(WIN32)
+   /* If building or using zlib as a DLL, define ZLIB_DLL.
+    * This is not mandatory, but it offers a little performance increase.
+    */
+#  ifdef ZLIB_DLL
+#    if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500))
+#      ifdef ZLIB_INTERNAL
+#        define ZEXTERN extern __declspec(dllexport)
+#      else
+#        define ZEXTERN extern __declspec(dllimport)
+#      endif
+#    endif
+#  endif  /* ZLIB_DLL */
+   /* If building or using zlib with the WINAPI/WINAPIV calling convention,
+    * define ZLIB_WINAPI.
+    * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
+    */
+#  ifdef ZLIB_WINAPI
 #    ifdef FAR
 #      undef FAR
 #    endif
 #    include <windows.h>
-#    define ZEXPORT(x)  x WINAPI
+     /* No need for _export, use ZLIB.DEF instead. */
+     /* For complete Windows compatibility, use WINAPI, not __stdcall. */
+#    define ZEXPORT WINAPI
 #    ifdef WIN32
-#      define ZEXPORTVA(x)  x WINAPIV
+#      define ZEXPORTVA WINAPIV
 #    else
-#      define ZEXPORTVA(x)  x FAR _cdecl _export
+#      define ZEXPORTVA FAR CDECL
 #    endif
 #  endif
-#  if defined (__BORLANDC__)
-#    if (__BORLANDC__ >= 0x0500) && defined (WIN32)
-#      include <windows.h>
-#      define ZEXPORT(x) x __declspec(dllexport) WINAPI
-#      define ZEXPORTRVA(x)  x __declspec(dllexport) WINAPIV
+#endif
+
+#if defined (__BEOS__)
+#  ifdef ZLIB_DLL
+#    ifdef ZLIB_INTERNAL
+#      define ZEXPORT   __declspec(dllexport)
+#      define ZEXPORTVA __declspec(dllexport)
 #    else
-#      if defined (_Windows) && defined (__DLL__)
-#        define ZEXPORT(x) x _export
-#        define ZEXPORTVA(x) x _export
-#      endif
+#      define ZEXPORT   __declspec(dllimport)
+#      define ZEXPORTVA __declspec(dllimport)
 #    endif
 #  endif
 #endif
 
-
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
 #ifndef ZEXPORT
-#  define ZEXPORT(x)   static x
+#  define ZEXPORT
 #endif
 #ifndef ZEXPORTVA
-#  define ZEXPORTVA(x)   static x
+#  define ZEXPORTVA
 #endif
-#ifndef ZEXTERN
-#  define ZEXTERN(x) static x
-#endif
-#ifndef ZEXTERNDEF
-#  define ZEXTERNDEF(x)  static x
-#endif
 
 #ifndef FAR
-#   define FAR
+#  define FAR
 #endif
 
-#if !defined(MACOS) && !defined(TARGET_OS_MAC)
+#if !defined(__MACTYPES__)
 typedef unsigned char  Byte;  /* 8 bits */
 #endif
 typedef unsigned int   uInt;  /* 16 bits or more */
@@ -233,52 +405,130 @@
 typedef uLong FAR uLongf;
 
 #ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
+   typedef void const *voidpc;
+   typedef void FAR   *voidpf;
+   typedef void       *voidp;
 #else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
+   typedef Byte const *voidpc;
+   typedef Byte FAR   *voidpf;
+   typedef Byte       *voidp;
 #endif
 
-#ifdef HAVE_UNISTD_H
-#  include <sys/types.h> /* for off_t */
-#  include <unistd.h>    /* for SEEK_* and off_t */
-#  define z_off_t  off_t
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  elif (ULONG_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned long
+#  elif (USHRT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned short
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
+#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+#    include <stdarg.h>         /* for va_list */
+#  endif
+#endif
+
+#ifdef _WIN32
+#  ifndef Z_SOLO
+#    include <stddef.h>         /* for wchar_t */
+#  endif
 #endif
-#ifndef SEEK_SET
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
+#endif
+
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
+#  define Z_LFS64
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
+#  define Z_LARGE64
+#endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
+#endif
+
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
 #  define SEEK_SET        0       /* Seek from beginning of file.  */
 #  define SEEK_CUR        1       /* Seek from current position.  */
 #  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
 #endif
+
 #ifndef z_off_t
-#  define  z_off_t long
+#  define z_off_t long
 #endif
 
+#if !defined(_WIN32) && defined(Z_LARGE64)
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
+#    define z_off64_t __int64
+#  else
+#    define z_off64_t z_off_t
+#  endif
+#endif
+
 /* MVS linker does not support external names larger than 8 bytes */
 #if defined(__MVS__)
-#   pragma map(deflateInit_,"DEIN")
-#   pragma map(deflateInit2_,"DEIN2")
-#   pragma map(deflateEnd,"DEEND")
-#   pragma map(inflateInit_,"ININ")
-#   pragma map(inflateInit2_,"ININ2")
-#   pragma map(inflateEnd,"INEND")
-#   pragma map(inflateSync,"INSY")
-#   pragma map(inflateSetDictionary,"INSEDI")
-#   pragma map(inflate_blocks,"INBL")
-#   pragma map(inflate_blocks_new,"INBLNE")
-#   pragma map(inflate_blocks_free,"INBLFR")
-#   pragma map(inflate_blocks_reset,"INBLRE")
-#   pragma map(inflate_codes_free,"INCOFR")
-#   pragma map(inflate_codes,"INCO")
-#   pragma map(inflate_fast,"INFA")
-#   pragma map(inflate_flush,"INFLU")
-#   pragma map(inflate_mask,"INMA")
-#   pragma map(inflate_set_dictionary,"INSEDI2")
-#   pragma map(inflate_copyright,"INCOPY")
-#   pragma map(inflate_trees_bits,"INTRBI")
-#   pragma map(inflate_trees_dynamic,"INTRDY")
-#   pragma map(inflate_trees_fixed,"INTRFI")
-#   pragma map(inflate_trees_free,"INTRFR")
+  #pragma map(deflateInit_,"DEIN")
+  #pragma map(deflateInit2_,"DEIN2")
+  #pragma map(deflateEnd,"DEEND")
+  #pragma map(deflateBound,"DEBND")
+  #pragma map(inflateInit_,"ININ")
+  #pragma map(inflateInit2_,"ININ2")
+  #pragma map(inflateEnd,"INEND")
+  #pragma map(inflateSync,"INSY")
+  #pragma map(inflateSetDictionary,"INSEDI")
+  #pragma map(compressBound,"CMBND")
+  #pragma map(inflate_table,"INTABL")
+  #pragma map(inflate_fast,"INFA")
+  #pragma map(inflate_copyright,"INCOPY")
 #endif
 
-#endif /* _ZCONF_H */
+#endif /* ZCONF_H */
--- /dev/null
+++ b/src/gzip/gzguts.h
@@ -1,0 +1,218 @@
+/* gzguts.h -- zlib internal header definitions for gz* operations
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifdef _LARGEFILE64_SOURCE
+#  ifndef _LARGEFILE_SOURCE
+#    define _LARGEFILE_SOURCE 1
+#  endif
+#  ifdef _FILE_OFFSET_BITS
+#    undef _FILE_OFFSET_BITS
+#  endif
+#endif
+
+#ifdef HAVE_HIDDEN
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
+#include <stdio.h>
+#include "zlib.h"
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#  include <limits.h>
+#endif
+
+#ifndef _POSIX_SOURCE
+#  define _POSIX_SOURCE
+#endif
+#include <fcntl.h>
+
+#ifdef _WIN32
+#  include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
+#  include <io.h>
+#endif
+
+#if defined(_WIN32) || defined(__CYGWIN__)
+#  define WIDECHAR
+#endif
+
+#ifdef WINAPI_FAMILY
+#  define open _open
+#  define read _read
+#  define write _write
+#  define close _close
+#endif
+
+#ifdef NO_DEFLATE       /* for compatibility with old definition */
+#  define NO_GZCOMPRESS
+#endif
+
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#ifndef HAVE_VSNPRINTF
+#  ifdef MSDOS
+/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+   but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef __TURBOC__
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
+#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+#         define vsnprintf _vsnprintf
+#      endif
+#    endif
+#  endif
+#  ifdef __SASC
+#    define NO_vsnprintf
+#  endif
+#  ifdef VMS
+#    define NO_vsnprintf
+#  endif
+#  ifdef __OS400__
+#    define NO_vsnprintf
+#  endif
+#  ifdef __MVS__
+#    define NO_vsnprintf
+#  endif
+#endif
+
+/* unlike snprintf (which is required in C99), _snprintf does not guarantee
+   null termination of the result -- however this is only used in gzlib.c where
+   the result is assured to fit in the space provided */
+#if defined(_MSC_VER) && _MSC_VER < 1900
+#  define snprintf _snprintf
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
+
+/* gz* functions always use library allocation functions */
+#ifndef STDC
+  extern voidp  malloc OF((uInt size));
+  extern void   free   OF((voidpf ptr));
+#endif
+
+/* get errno and strerror definition */
+#if defined UNDER_CE
+#  include <windows.h>
+#  define zstrerror() gz_strwinerror((DWORD)GetLastError())
+#else
+#  ifndef NO_STRERROR
+#    include <errno.h>
+#    define zstrerror() strerror(errno)
+#  else
+#    define zstrerror() "stdio error (consult errno)"
+#  endif
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+#endif
+
+/* default memLevel */
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+
+/* default i/o buffer size -- double this for output when reading (this and
+   twice this must be able to fit in an unsigned type) */
+#define GZBUFSIZE 8192
+
+/* gzip modes, also provide a little integrity check on the passed structure */
+#define GZ_NONE 0
+#define GZ_READ 7247
+#define GZ_WRITE 31153
+#define GZ_APPEND 1     /* mode set to GZ_WRITE after the file is opened */
+
+/* values for gz_state how */
+#define LOOK 0      /* look for a gzip header */
+#define COPY__ 1      /* copy input directly */
+#define GZIP 2      /* decompress a gzip stream */
+
+/* internal gzip file state data structure */
+typedef struct {
+        /* exposed contents for gzgetc() macro */
+    struct gzFile_s x;      /* "x" for exposed */
+                            /* x.have: number of bytes available at x.next */
+                            /* x.next: next output data to deliver or write */
+                            /* x.pos: current position in uncompressed data */
+        /* used for both reading and writing */
+    int mode;               /* see gzip modes above */
+    int fd;                 /* file descriptor */
+    char *path;             /* path or fd for error messages */
+    unsigned size;          /* buffer size, zero if not allocated yet */
+    unsigned want;          /* requested buffer size, default is GZBUFSIZE */
+    unsigned char *in;      /* input buffer (double-sized when writing) */
+    unsigned char *out;     /* output buffer (double-sized when reading) */
+    int direct;             /* 0 if processing gzip, 1 if transparent */
+        /* just for reading */
+    int how;                /* 0: get header, 1: copy, 2: decompress */
+    z_off64_t start;        /* where the gzip data started, for rewinding */
+    int eof;                /* true if end of input file reached */
+    int past;               /* true if read requested past end */
+        /* just for writing */
+    int level;              /* compression level */
+    int strategy;           /* compression strategy */
+        /* seek request */
+    z_off64_t skip;         /* amount to skip (already rewound if backwards) */
+    int seek;               /* true if seek request pending */
+        /* error information */
+    int err;                /* error code */
+    char *msg;              /* error message */
+        /* zlib inflate or deflate stream */
+    z_stream strm;          /* stream structure in-place (not a pointer) */
+} gz_state;
+typedef gz_state FAR *gz_statep;
+
+/* shared functions */
+void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
+#if defined UNDER_CE
+char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
+#endif
+
+/* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
+   value -- needed when comparing unsigned to z_off64_t, which is signed
+   (possible z_off64_t types off_t, off64_t, and long are all signed) */
+#ifdef INT_MAX
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
+#else
+unsigned ZLIB_INTERNAL gz_intmax OF((void));
+#  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
+#endif
--- /dev/null
+++ b/src/gzip/infback.c
@@ -1,0 +1,640 @@
+/* infback.c -- inflate using a call-back interface
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+   This code is largely copied from inflate.c.  Normally either infback.o or
+   inflate.o would be linked into an application--not both.  The interface
+   with inffast.c is retained so that optimized assembler-coded versions of
+   inflate_fast() can be used with either inflate.c or infback.c.
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* function prototypes */
+local void fixedtables OF((struct inflate_state FAR *state));
+
+/*
+   strm provides memory allocation functions in zalloc and zfree, or
+   Z_NULL to use the library memory allocation functions.
+
+   windowBits is in the range 8..15, and window is a user-supplied
+   window and output buffer that is 2**windowBits bytes.
+ */
+int ZEXPORT inflateBackInit_(
+    z_streamp strm,
+    int windowBits,
+    unsigned char FAR *window,
+    const char *version,
+    int stream_size)
+{
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL || window == Z_NULL ||
+        windowBits < 8 || windowBits > 15)
+        return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+#endif
+    }
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+    strm->zfree = zcfree;
+#endif
+    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+                                               sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->dmax = 32768U;
+    state->wbits = (uInt)windowBits;
+    state->wsize = 1U << windowBits;
+    state->window = window;
+    state->wnext = 0;
+    state->whave = 0;
+    return Z_OK;
+}
+
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(
+    struct inflate_state FAR *state)
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
+
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
+
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
+}
+
+/* Macros for inflateBack(): */
+
+/* Load returned state from inflate_fast() */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Set state from registers for inflate_fast() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Assure that some input is available.  If input is requested, but denied,
+   then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+    do { \
+        if (have == 0) { \
+            have = in(in_desc, &next); \
+            if (have == 0) { \
+                next = Z_NULL; \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+   with an error if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        PULL(); \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflateBack() with
+   an error. */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/* Assure that some output space is available, by writing out the window
+   if it's full.  If the write fails, return from inflateBack() with a
+   Z_BUF_ERROR. */
+#define ROOM() \
+    do { \
+        if (left == 0) { \
+            put = state->window; \
+            left = state->wsize; \
+            state->whave = left; \
+            if (out(out_desc, put, left)) { \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/*
+   strm provides the memory allocation functions and window buffer on input,
+   and provides information on the unused input on return.  For Z_DATA_ERROR
+   returns, strm will also provide an error message.
+
+   in() and out() are the call-back input and output functions.  When
+   inflateBack() needs more input, it calls in().  When inflateBack() has
+   filled the window with output, or when it completes with data in the
+   window, it calls out() to write out the data.  The application must not
+   change the provided input until in() is called again or inflateBack()
+   returns.  The application must not change the window/output buffer until
+   inflateBack() returns.
+
+   in() and out() are called with a descriptor parameter provided in the
+   inflateBack() call.  This parameter can be a structure that provides the
+   information required to do the read or write, as well as accumulated
+   information on the input and output such as totals and check values.
+
+   in() should return zero on failure.  out() should return non-zero on
+   failure.  If either in() or out() fails, than inflateBack() returns a
+   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
+   was in() or out() that caused in the error.  Otherwise,  inflateBack()
+   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+   error, or Z_MEM_ERROR if it could not allocate memory for the state.
+   inflateBack() can also return Z_STREAM_ERROR if the input parameters
+   are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack(
+    z_streamp strm,
+    in_func in,
+    void FAR *in_desc,
+    out_func out,
+    void FAR *out_desc)
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    /* Check that the strm exists and that the state was initialized */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* Reset the state */
+    strm->msg = Z_NULL;
+    state->mode = TYPE;
+    state->last = 0;
+    state->whave = 0;
+    next = strm->next_in;
+    have = next != Z_NULL ? strm->avail_in : 0;
+    hold = 0;
+    bits = 0;
+    put = state->window;
+    left = state->wsize;
+
+    /* Inflate until end of block marked as last */
+    for (;;)
+        switch (state->mode) {
+        case TYPE:
+            /* determine and dispatch block type */
+            if (state->last) {
+                BYTEBITS();
+                state->mode = DONE;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN;              /* decode codes */
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+
+        case STORED:
+            /* get and verify stored block length */
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+
+            /* copy stored block from input to output */
+            while (state->length != 0) {
+                copy = state->length;
+                PULL();
+                ROOM();
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+
+        case TABLE:
+            /* get dynamic table entries descriptor */
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+
+            /* get code length code lengths (not a typo) */
+            state->have = 0;
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+
+            /* get length and distance code code lengths */
+            state->have = 0;
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = (unsigned)(state->lens[state->have - 1]);
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (code const FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (code const FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN;
+
+        case LEN:
+            /* use inflate_fast() if we have enough input and output */
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                if (state->whave < state->wsize)
+                    state->whave = state->wsize - left;
+                inflate_fast(strm, state->wsize);
+                LOAD();
+                break;
+            }
+
+            /* get a literal, length, or end-of-block code */
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            state->length = (unsigned)here.val;
+
+            /* process literal */
+            if (here.op == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                ROOM();
+                *put++ = (unsigned char)(state->length);
+                left--;
+                state->mode = LEN;
+                break;
+            }
+
+            /* process end of block */
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->mode = TYPE;
+                break;
+            }
+
+            /* invalid code */
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+
+            /* length code -- get extra bits, if any */
+            state->extra = (unsigned)(here.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+
+            /* get distance code */
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+
+            /* get distance extra bits, if any */
+            state->extra = (unsigned)(here.op) & 15;
+            if (state->extra != 0) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+            }
+            if (state->offset > state->wsize - (state->whave < state->wsize ?
+                                                left : 0)) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+
+            /* copy match from window to output */
+            do {
+                ROOM();
+                copy = state->wsize - state->offset;
+                if (copy < left) {
+                    from = put + copy;
+                    copy = left - copy;
+                }
+                else {
+                    from = put - state->offset;
+                    copy = left;
+                }
+                if (copy > state->length) copy = state->length;
+                state->length -= copy;
+                left -= copy;
+                do {
+                    *put++ = *from++;
+                } while (--copy);
+            } while (state->length != 0);
+            break;
+
+        case DONE:
+            /* inflate stream terminated properly -- write leftover output */
+            ret = Z_STREAM_END;
+            if (left < state->wsize) {
+                if (out(out_desc, state->window, state->wsize - left))
+                    ret = Z_BUF_ERROR;
+            }
+            goto inf_leave;
+
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+
+        default:                /* can't happen, but makes compilers happy */
+            ret = Z_STREAM_ERROR;
+            goto inf_leave;
+        }
+
+    /* Return unused input */
+  inf_leave:
+    strm->next_in = next;
+    strm->avail_in = have;
+    return ret;
+}
+
+int ZEXPORT inflateBackEnd(
+    z_streamp strm)
+{
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
--- a/src/gzip/infblock.c
+++ /dev/null
@@ -1,392 +1,0 @@
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset( /* s, z, c) */
-inflate_blocks_statef *s,
-z_streamp z,
-uLongf *c )
-{
-  if (c != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens);
-  if (s->mode == CODES)
-    inflate_codes_free(s->sub.decode.codes, z);
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
-  Tracev((stderr, "inflate:   blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new( /* z, c, w) */
-z_streamp z,
-check_func c,
-uInt w )
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->hufts =
-       (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
-  {
-    ZFREE(z, s);
-    return Z_NULL;
-  }
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s->hufts);
-    ZFREE(z, s);
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Tracev((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, Z_NULL);
-  return s;
-}
-
-
-local int inflate_blocks( /* s, z, r) */
-inflate_blocks_statef *s,
-z_streamp z,
-int r )
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Tracev((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Tracev((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, (const inflate_huft**)&tl,
-                                          (const inflate_huft**)&td, z);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Tracev((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BAD;
-          z->msg = (char*)"invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
-      {
-        s->mode = BAD;
-        z->msg = (char*)"invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BAD;
-        z->msg = (char*)"too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-      /* fall through */
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, s->hufts, z);
-      if (t != Z_OK)
-      {
-        r = t;
-        if (r == Z_DATA_ERROR)
-        {
-          ZFREE(z, s->sub.trees.blens);
-          s->mode = BAD;
-        }
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-      /* fall through */
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->bits;
-        c = h->base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            ZFREE(z, s->sub.trees.blens);
-            s->mode = BAD;
-            z->msg = (char*)"invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td,
-                                  s->hufts, z);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-          {
-            ZFREE(z, s->sub.trees.blens);
-            s->mode = BAD;
-          }
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok\n"));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        s->sub.decode.codes = c;
-      }
-      ZFREE(z, s->sub.trees.blens);
-      s->mode = CODES;
-      /* fall through */
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      s->mode = DRY;
-      /* fall through */
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONE;
-      /* fall through */
-    case DONE:
-      r = Z_STREAM_END;
-      LEAVE
-    case BAD:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-#ifdef NEED_DUMMY_RETURN
-  return 0;
-#endif
-}
-
-
-local int inflate_blocks_free( /* s, z) */
-inflate_blocks_statef *s,
-z_streamp z )
-{
-  inflate_blocks_reset(s, z, Z_NULL);
-  ZFREE(z, s->window);
-  ZFREE(z, s->hufts);
-  ZFREE(z, s);
-  Tracev((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-
--- a/src/gzip/infblock.h
+++ /dev/null
@@ -1,36 +1,0 @@
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFBLOCK_H
-#define _INFBLOCK_H
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local  inflate_blocks_statef * inflate_blocks_new OF((
-    z_streamp z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-local  int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));                      /* initial return code */
-
-local  void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-local  int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_streamp));
-
-#endif /* _INFBLOCK_H */
--- a/src/gzip/infcodes.c
+++ /dev/null
@@ -1,254 +1,0 @@
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "inftrees.h"
-#include "infblock.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-typedef enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-inflate_codes_mode;
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  inflate_codes_mode mode;      /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new( /* bl, bd, tl, td, z) */
-uInt bl, uInt bd,
-inflate_huft *tl,
-inflate_huft *td, /* need separate declaration for Borland C++ */
-z_streamp z )
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-local int inflate_codes( /* s, z, r) */
-inflate_blocks_statef *s,
-z_streamp z,
-int r )
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-      /* fall through */
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t + t->base;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-      /* fall through */
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t + t->base;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-      /* fall through */
-    case COPY:          /* o: copying bytes in window, waiting for space */
-      f = q - c->sub.copy.dist;
-      while (f < s->window)             /* modulo window size-"while" instead */
-        f += s->end - s->window;        /* of "if" handles invalid distances */
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      if (k > 7)        /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;            /* can always return one */
-      }
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-      /* fall through */
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-#ifdef NEED_DUMMY_RETURN
-  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
-#endif
-}
-
-
-local void inflate_codes_free( /* c, z) */
-inflate_codes_statef *c,
-z_streamp z )
-{
-  ZFREE(z, c);
-  Tracev((stderr, "inflate:       codes free\n"));
-}
--- a/src/gzip/infcodes.h
+++ /dev/null
@@ -1,31 +1,0 @@
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFCODES_H
-#define _INFCODES_H
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_streamp ));
-
-local int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-local void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_streamp ));
-
-#endif /* _INFCODES_H */
--- /dev/null
+++ b/src/gzip/inffast.c
@@ -1,0 +1,323 @@
+/* inffast.c -- fast decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+#ifdef ASMINF
+#  pragma message("Assembler code may have bugs -- use at your own risk")
+#else
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+void ZLIB_INTERNAL inflate_fast(
+    z_streamp strm,
+    unsigned start)
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *in;      /* local strm->next_in */
+    z_const unsigned char FAR *last;    /* have enough input while in < last */
+    unsigned char FAR *out;     /* local strm->next_out */
+    unsigned char FAR *beg;     /* inflate()'s initial strm->next_out */
+    unsigned char FAR *end;     /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+    unsigned dmax;              /* maximum distance from zlib header */
+#endif
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if wsize != 0 */
+    unsigned long hold;         /* local strm->hold */
+    unsigned bits;              /* local strm->bits */
+    code const FAR *lcode;      /* local strm->lencode */
+    code const FAR *dcode;      /* local strm->distcode */
+    unsigned lmask;             /* mask for first level of length codes */
+    unsigned dmask;             /* mask for first level of distance codes */
+    code here;                  /* retrieved table entry */
+    unsigned op;                /* code bits, operation, extra bits, or */
+                                /*  window position, window bytes to copy */
+    unsigned len;               /* match length, unused bytes */
+    unsigned dist;              /* match distance */
+    unsigned char FAR *from;    /* where to copy match from */
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+    in = strm->next_in;
+    last = in + (strm->avail_in - 5);
+    out = strm->next_out;
+    beg = out - (start - strm->avail_out);
+    end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+    dmax = state->dmax;
+#endif
+    wsize = state->wsize;
+    whave = state->whave;
+    wnext = state->wnext;
+    window = state->window;
+    hold = state->hold;
+    bits = state->bits;
+    lcode = state->lencode;
+    dcode = state->distcode;
+    lmask = (1U << state->lenbits) - 1;
+    dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+    do {
+        if (bits < 15) {
+            hold += (unsigned long)(*in++) << bits;
+            bits += 8;
+            hold += (unsigned long)(*in++) << bits;
+            bits += 8;
+        }
+        here = lcode[hold & lmask];
+      dolen:
+        op = (unsigned)(here.bits);
+        hold >>= op;
+        bits -= op;
+        op = (unsigned)(here.op);
+        if (op == 0) {                          /* literal */
+            Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                    "inflate:         literal '%c'\n" :
+                    "inflate:         literal 0x%02x\n", here.val));
+            *out++ = (unsigned char)(here.val);
+        }
+        else if (op & 16) {                     /* length base */
+            len = (unsigned)(here.val);
+            op &= 15;                           /* number of extra bits */
+            if (op) {
+                if (bits < op) {
+                    hold += (unsigned long)(*in++) << bits;
+                    bits += 8;
+                }
+                len += (unsigned)hold & ((1U << op) - 1);
+                hold >>= op;
+                bits -= op;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", len));
+            if (bits < 15) {
+                hold += (unsigned long)(*in++) << bits;
+                bits += 8;
+                hold += (unsigned long)(*in++) << bits;
+                bits += 8;
+            }
+            here = dcode[hold & dmask];
+          dodist:
+            op = (unsigned)(here.bits);
+            hold >>= op;
+            bits -= op;
+            op = (unsigned)(here.op);
+            if (op & 16) {                      /* distance base */
+                dist = (unsigned)(here.val);
+                op &= 15;                       /* number of extra bits */
+                if (bits < op) {
+                    hold += (unsigned long)(*in++) << bits;
+                    bits += 8;
+                    if (bits < op) {
+                        hold += (unsigned long)(*in++) << bits;
+                        bits += 8;
+                    }
+                }
+                dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+                if (dist > dmax) {
+                    strm->msg = (char *)"invalid distance too far back";
+                    state->mode = BAD;
+                    break;
+                }
+#endif
+                hold >>= op;
+                bits -= op;
+                Tracevv((stderr, "inflate:         distance %u\n", dist));
+                op = (unsigned)(out - beg);     /* max distance in output */
+                if (dist > op) {                /* see if copy from window */
+                    op = dist - op;             /* distance back in window */
+                    if (op > whave) {
+                        if (state->sane) {
+                            strm->msg =
+                                (char *)"invalid distance too far back";
+                            state->mode = BAD;
+                            break;
+                        }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        if (len <= op - whave) {
+                            do {
+                                *out++ = 0;
+                            } while (--len);
+                            continue;
+                        }
+                        len -= op - whave;
+                        do {
+                            *out++ = 0;
+                        } while (--op > whave);
+                        if (op == 0) {
+                            from = out - dist;
+                            do {
+                                *out++ = *from++;
+                            } while (--len);
+                            continue;
+                        }
+#endif
+                    }
+                    from = window;
+                    if (wnext == 0) {           /* very common case */
+                        from += wsize - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                *out++ = *from++;
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    else if (wnext < op) {      /* wrap around window */
+                        from += wsize + wnext - op;
+                        op -= wnext;
+                        if (op < len) {         /* some from end of window */
+                            len -= op;
+                            do {
+                                *out++ = *from++;
+                            } while (--op);
+                            from = window;
+                            if (wnext < len) {  /* some from start of window */
+                                op = wnext;
+                                len -= op;
+                                do {
+                                    *out++ = *from++;
+                                } while (--op);
+                                from = out - dist;      /* rest from output */
+                            }
+                        }
+                    }
+                    else {                      /* contiguous in window */
+                        from += wnext - op;
+                        if (op < len) {         /* some from window */
+                            len -= op;
+                            do {
+                                *out++ = *from++;
+                            } while (--op);
+                            from = out - dist;  /* rest from output */
+                        }
+                    }
+                    while (len > 2) {
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        len -= 3;
+                    }
+                    if (len) {
+                        *out++ = *from++;
+                        if (len > 1)
+                            *out++ = *from++;
+                    }
+                }
+                else {
+                    from = out - dist;          /* copy direct from output */
+                    do {                        /* minimum length is three */
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        *out++ = *from++;
+                        len -= 3;
+                    } while (len > 2);
+                    if (len) {
+                        *out++ = *from++;
+                        if (len > 1)
+                            *out++ = *from++;
+                    }
+                }
+            }
+            else if ((op & 64) == 0) {          /* 2nd level distance code */
+                here = dcode[here.val + (hold & ((1U << op) - 1))];
+                goto dodist;
+            }
+            else {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+        }
+        else if ((op & 64) == 0) {              /* 2nd level length code */
+            here = lcode[here.val + (hold & ((1U << op) - 1))];
+            goto dolen;
+        }
+        else if (op & 32) {                     /* end-of-block */
+            Tracevv((stderr, "inflate:         end of block\n"));
+            state->mode = TYPE;
+            break;
+        }
+        else {
+            strm->msg = (char *)"invalid literal/length code";
+            state->mode = BAD;
+            break;
+        }
+    } while (in < last && out < end);
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    len = bits >> 3;
+    in -= len;
+    bits -= len << 3;
+    hold &= (1U << bits) - 1;
+
+    /* update state and return */
+    strm->next_in = in;
+    strm->next_out = out;
+    strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last));
+    strm->avail_out = (unsigned)(out < end ?
+                                 257 + (end - out) : 257 - (out - end));
+    state->hold = hold;
+    state->bits = bits;
+    return;
+}
+
+/*
+   inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
+   - Using bit fields for code structure
+   - Different op definition to avoid & for extra bits (do & for table bits)
+   - Three separate decoding do-loops for direct, window, and wnext == 0
+   - Special case for distance > 1 copies to do overlapped load and store copy
+   - Explicit branch predictions (based on measured branch probabilities)
+   - Deferring match copy and interspersed it with decoding subsequent codes
+   - Swapping literal/length else
+   - Swapping window/direct else
+   - Larger unrolled copy loops (three is about right)
+   - Moving len -= 3 statement into middle of loop
+ */
+
+#endif /* !ASMINF */
--- /dev/null
+++ b/src/gzip/inffast.h
@@ -1,0 +1,11 @@
+/* inffast.h -- header to use inffast.c
+ * Copyright (C) 1995-2003, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
--- a/src/gzip/inffixed.h
+++ b/src/gzip/inffixed.h
@@ -1,151 +1,94 @@
-/* inffixed.h -- table for decoding fixed codes
- * Generated automatically by the maketree.c program
- */
+    /* inffixed.h -- table for decoding fixed codes
+     * Generated automatically by makefixed().
+     */
 
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
+    /* WARNING: this file should *not* be used by applications.
+       It is part of the implementation of this library and is
+       subject to change. Applications should only use zlib.h.
+     */
 
-local const uInt fixed_bl = 9;
-local const uInt fixed_bd = 5;
-local const inflate_huft fixed_tl[] = {
-    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
-    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
-    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
-    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
-    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
-    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
-    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
-    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
-    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
-    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
-    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
-    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
-    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
-    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
-    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
-    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
-    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
-    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
-    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
-    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
-    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
-    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
-    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
-    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
-    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
-    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
-    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
-    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
-    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
-    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
-    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
-    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
-    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
-    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
-    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
-    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
-    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
-    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
-    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
-    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
-    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
-    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
-    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
-    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
-    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
-    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
-    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
-    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
-    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
-    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
-    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
-    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
-    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
-    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
-    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
-    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
-    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
-    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
-    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
-    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
-    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
-    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
-    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
-    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
-    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
-    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
-    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
-    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
-    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
-    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
-    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
-    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
-    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
-    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
-    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
-    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
-    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
-    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
-    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
-    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
-    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
-    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
-    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
-    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
-    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
-    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
-    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
-    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
-    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
-    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
-    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
-    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
-    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
-    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
-    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
-    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
-    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
-    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
-    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
-    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
-    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
-    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
-    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
-    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
-    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
-    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
-    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
-    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
-    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
-    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
-    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
-    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
-    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
-    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
-    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
-    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
-    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
-    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
-    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
-    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
-    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
-    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
-    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
-    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
-    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
-  };
-local const inflate_huft fixed_td[] = {
-    {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
-    {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
-    {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
-    {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
-    {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
-    {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
-    {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
-    {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
-  };
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{20,8,115},{18,7,31},{0,8,112},{0,8,48},
+        {0,9,192},{16,7,10},{0,8,96},{0,8,32},{0,9,160},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,224},{16,7,6},{0,8,88},{0,8,24},{0,9,144},{19,7,59},
+        {0,8,120},{0,8,56},{0,9,208},{17,7,17},{0,8,104},{0,8,40},{0,9,176},
+        {0,8,8},{0,8,136},{0,8,72},{0,9,240},{16,7,4},{0,8,84},{0,8,20},
+        {21,8,227},{19,7,43},{0,8,116},{0,8,52},{0,9,200},{17,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},{16,7,8},
+        {0,8,92},{0,8,28},{0,9,152},{20,7,83},{0,8,124},{0,8,60},{0,9,216},
+        {18,7,23},{0,8,108},{0,8,44},{0,9,184},{0,8,12},{0,8,140},{0,8,76},
+        {0,9,248},{16,7,3},{0,8,82},{0,8,18},{21,8,163},{19,7,35},{0,8,114},
+        {0,8,50},{0,9,196},{17,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},
+        {0,8,130},{0,8,66},{0,9,228},{16,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {20,7,67},{0,8,122},{0,8,58},{0,9,212},{18,7,19},{0,8,106},{0,8,42},
+        {0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},{16,7,5},{0,8,86},
+        {0,8,22},{64,8,0},{19,7,51},{0,8,118},{0,8,54},{0,9,204},{17,7,15},
+        {0,8,102},{0,8,38},{0,9,172},{0,8,6},{0,8,134},{0,8,70},{0,9,236},
+        {16,7,9},{0,8,94},{0,8,30},{0,9,156},{20,7,99},{0,8,126},{0,8,62},
+        {0,9,220},{18,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{21,8,131},{18,7,31},
+        {0,8,113},{0,8,49},{0,9,194},{16,7,10},{0,8,97},{0,8,33},{0,9,162},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,226},{16,7,6},{0,8,89},{0,8,25},
+        {0,9,146},{19,7,59},{0,8,121},{0,8,57},{0,9,210},{17,7,17},{0,8,105},
+        {0,8,41},{0,9,178},{0,8,9},{0,8,137},{0,8,73},{0,9,242},{16,7,4},
+        {0,8,85},{0,8,21},{16,8,258},{19,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {17,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},{0,8,69},
+        {0,9,234},{16,7,8},{0,8,93},{0,8,29},{0,9,154},{20,7,83},{0,8,125},
+        {0,8,61},{0,9,218},{18,7,23},{0,8,109},{0,8,45},{0,9,186},{0,8,13},
+        {0,8,141},{0,8,77},{0,9,250},{16,7,3},{0,8,83},{0,8,19},{21,8,195},
+        {19,7,35},{0,8,115},{0,8,51},{0,9,198},{17,7,11},{0,8,99},{0,8,35},
+        {0,9,166},{0,8,3},{0,8,131},{0,8,67},{0,9,230},{16,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{20,7,67},{0,8,123},{0,8,59},{0,9,214},{18,7,19},
+        {0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},{0,8,75},{0,9,246},
+        {16,7,5},{0,8,87},{0,8,23},{64,8,0},{19,7,51},{0,8,119},{0,8,55},
+        {0,9,206},{17,7,15},{0,8,103},{0,8,39},{0,9,174},{0,8,7},{0,8,135},
+        {0,8,71},{0,9,238},{16,7,9},{0,8,95},{0,8,31},{0,9,158},{20,7,99},
+        {0,8,127},{0,8,63},{0,9,222},{18,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},{0,8,16},
+        {20,8,115},{18,7,31},{0,8,112},{0,8,48},{0,9,193},{16,7,10},{0,8,96},
+        {0,8,32},{0,9,161},{0,8,0},{0,8,128},{0,8,64},{0,9,225},{16,7,6},
+        {0,8,88},{0,8,24},{0,9,145},{19,7,59},{0,8,120},{0,8,56},{0,9,209},
+        {17,7,17},{0,8,104},{0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},
+        {0,9,241},{16,7,4},{0,8,84},{0,8,20},{21,8,227},{19,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{17,7,13},{0,8,100},{0,8,36},{0,9,169},{0,8,4},
+        {0,8,132},{0,8,68},{0,9,233},{16,7,8},{0,8,92},{0,8,28},{0,9,153},
+        {20,7,83},{0,8,124},{0,8,60},{0,9,217},{18,7,23},{0,8,108},{0,8,44},
+        {0,9,185},{0,8,12},{0,8,140},{0,8,76},{0,9,249},{16,7,3},{0,8,82},
+        {0,8,18},{21,8,163},{19,7,35},{0,8,114},{0,8,50},{0,9,197},{17,7,11},
+        {0,8,98},{0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {16,7,7},{0,8,90},{0,8,26},{0,9,149},{20,7,67},{0,8,122},{0,8,58},
+        {0,9,213},{18,7,19},{0,8,106},{0,8,42},{0,9,181},{0,8,10},{0,8,138},
+        {0,8,74},{0,9,245},{16,7,5},{0,8,86},{0,8,22},{64,8,0},{19,7,51},
+        {0,8,118},{0,8,54},{0,9,205},{17,7,15},{0,8,102},{0,8,38},{0,9,173},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,237},{16,7,9},{0,8,94},{0,8,30},
+        {0,9,157},{20,7,99},{0,8,126},{0,8,62},{0,9,221},{18,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},{96,7,0},
+        {0,8,81},{0,8,17},{21,8,131},{18,7,31},{0,8,113},{0,8,49},{0,9,195},
+        {16,7,10},{0,8,97},{0,8,33},{0,9,163},{0,8,1},{0,8,129},{0,8,65},
+        {0,9,227},{16,7,6},{0,8,89},{0,8,25},{0,9,147},{19,7,59},{0,8,121},
+        {0,8,57},{0,9,211},{17,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},
+        {0,8,137},{0,8,73},{0,9,243},{16,7,4},{0,8,85},{0,8,21},{16,8,258},
+        {19,7,43},{0,8,117},{0,8,53},{0,9,203},{17,7,13},{0,8,101},{0,8,37},
+        {0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},{16,7,8},{0,8,93},
+        {0,8,29},{0,9,155},{20,7,83},{0,8,125},{0,8,61},{0,9,219},{18,7,23},
+        {0,8,109},{0,8,45},{0,9,187},{0,8,13},{0,8,141},{0,8,77},{0,9,251},
+        {16,7,3},{0,8,83},{0,8,19},{21,8,195},{19,7,35},{0,8,115},{0,8,51},
+        {0,9,199},{17,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{16,7,7},{0,8,91},{0,8,27},{0,9,151},{20,7,67},
+        {0,8,123},{0,8,59},{0,9,215},{18,7,19},{0,8,107},{0,8,43},{0,9,183},
+        {0,8,11},{0,8,139},{0,8,75},{0,9,247},{16,7,5},{0,8,87},{0,8,23},
+        {64,8,0},{19,7,51},{0,8,119},{0,8,55},{0,9,207},{17,7,15},{0,8,103},
+        {0,8,39},{0,9,175},{0,8,7},{0,8,135},{0,8,71},{0,9,239},{16,7,9},
+        {0,8,95},{0,8,31},{0,9,159},{20,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {18,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},{0,8,79},
+        {0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {16,5,1},{23,5,257},{19,5,17},{27,5,4097},{17,5,5},{25,5,1025},
+        {21,5,65},{29,5,16385},{16,5,3},{24,5,513},{20,5,33},{28,5,8193},
+        {18,5,9},{26,5,2049},{22,5,129},{64,5,0},{16,5,2},{23,5,385},
+        {19,5,25},{27,5,6145},{17,5,7},{25,5,1537},{21,5,97},{29,5,24577},
+        {16,5,4},{24,5,769},{20,5,49},{28,5,12289},{18,5,13},{26,5,3073},
+        {22,5,193},{64,5,0}
+    };
--- a/src/gzip/inflate.c
+++ b/src/gzip/inflate.c
@@ -1,283 +1,1579 @@
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-2002 Mark Adler
+/* inflate.c -- zlib decompression
+ * Copyright (C) 1995-2016 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
+/*
+ * Change history:
+ *
+ * 1.2.beta0    24 Nov 2002
+ * - First version -- complete rewrite of inflate to simplify code, avoid
+ *   creation of window when not needed, minimize use of window when it is
+ *   needed, make inffast.c even faster, implement gzip decoding, and to
+ *   improve code readability and style over the previous zlib inflate code
+ *
+ * 1.2.beta1    25 Nov 2002
+ * - Use pointers for available input and output checking in inffast.c
+ * - Remove input and output counters in inffast.c
+ * - Change inffast.c entry and loop from avail_in >= 7 to >= 6
+ * - Remove unnecessary second byte pull from length extra in inffast.c
+ * - Unroll direct copy to three copies per loop in inffast.c
+ *
+ * 1.2.beta2    4 Dec 2002
+ * - Change external routine names to reduce potential conflicts
+ * - Correct filename to inffixed.h for fixed tables in inflate.c
+ * - Make hbuf[] unsigned char to match parameter type in inflate.c
+ * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset)
+ *   to avoid negation problem on Alphas (64 bit) in inflate.c
+ *
+ * 1.2.beta3    22 Dec 2002
+ * - Add comments on state->bits assertion in inffast.c
+ * - Add comments on op field in inftrees.h
+ * - Fix bug in reuse of allocated window after inflateReset()
+ * - Remove bit fields--back to byte structure for speed
+ * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths
+ * - Change post-increments to pre-increments in inflate_fast(), PPC biased?
+ * - Add compile time option, POSTINC, to use post-increments instead (Intel?)
+ * - Make MATCH copy in inflate() much faster for when inflate_fast() not used
+ * - Use local copies of stream next and avail values, as well as local bit
+ *   buffer and bit count in inflate()--for speed when inflate_fast() not used
+ *
+ * 1.2.beta4    1 Jan 2003
+ * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings
+ * - Move a comment on output buffer sizes from inffast.c to inflate.c
+ * - Add comments in inffast.c to introduce the inflate_fast() routine
+ * - Rearrange window copies in inflate_fast() for speed and simplification
+ * - Unroll last copy for window match in inflate_fast()
+ * - Use local copies of window variables in inflate_fast() for speed
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
+ * - Make op and len in inflate_fast() unsigned for consistency
+ * - Add FAR to lcode and dcode declarations in inflate_fast()
+ * - Simplified bad distance check in inflate_fast()
+ * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new
+ *   source file infback.c to provide a call-back interface to inflate for
+ *   programs like gzip and unzip -- uses window as output buffer to avoid
+ *   window copying
+ *
+ * 1.2.beta5    1 Jan 2003
+ * - Improved inflateBack() interface to allow the caller to provide initial
+ *   input in strm.
+ * - Fixed stored blocks bug in inflateBack()
+ *
+ * 1.2.beta6    4 Jan 2003
+ * - Added comments in inffast.c on effectiveness of POSTINC
+ * - Typecasting all around to reduce compiler warnings
+ * - Changed loops from while (1) or do {} while (1) to for (;;), again to
+ *   make compilers happy
+ * - Changed type of window in inflateBackInit() to unsigned char *
+ *
+ * 1.2.beta7    27 Jan 2003
+ * - Changed many types to unsigned or unsigned short to avoid warnings
+ * - Added inflateCopy() function
+ *
+ * 1.2.0        9 Mar 2003
+ * - Changed inflateBack() interface to provide separate opaque descriptors
+ *   for the in() and out() functions
+ * - Changed inflateBack() argument and in_func typedef to swap the length
+ *   and buffer address return values for the input function
+ * - Check next_in and next_out for Z_NULL on entry to inflate()
+ *
+ * The history for versions after 1.2.0 are in ChangeLog in zlib distribution.
+ */
+
 #include "zutil.h"
-#include "infblock.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
 
-#define  DONE  INFLATE_DONE
-#define  BAD   INFLATE_BAD
+#ifdef MAKEFIXED
+#  ifndef BUILDFIXED
+#    define BUILDFIXED
+#  endif
+#endif
 
-typedef enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      DICT4,    /* four dictionary check bytes to go */
-      DICT3,    /* three dictionary check bytes to go */
-      DICT2,    /* two dictionary check bytes to go */
-      DICT1,    /* one dictionary check byte to go */
-      DICT0,    /* waiting for inflateSetDictionary */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-inflate_mode;
+/* function prototypes */
+local int inflateStateCheck OF((z_streamp strm));
+local void fixedtables OF((struct inflate_state FAR *state));
+local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+                           unsigned copy));
+#ifdef BUILDFIXED
+   void makefixed OF((void));
+#endif
+#ifndef Z_FREETYPE
+local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+                              unsigned len));
+#endif
 
-/* inflate private state */
-struct internal_state {
+local int inflateStateCheck(
+    z_streamp strm)
+{
+    struct inflate_state FAR *state;
+    if (strm == Z_NULL ||
+        strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0)
+        return 1;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state == Z_NULL || state->strm != strm ||
+        state->mode < HEAD || state->mode > SYNC)
+        return 1;
+    return 0;
+}
 
-  /* mode */
-  inflate_mode  mode;   /* current inflate mode */
+int ZEXPORT inflateResetKeep(
+    z_streamp strm)
+{
+    struct inflate_state FAR *state;
 
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    strm->total_in = strm->total_out = state->total = 0;
+    strm->msg = Z_NULL;
+    if (state->wrap)        /* to support ill-conceived Java test suite */
+        strm->adler = state->wrap & 1;
+    state->mode = HEAD;
+    state->last = 0;
+    state->havedict = 0;
+    state->dmax = 32768U;
+    state->head = Z_NULL;
+    state->hold = 0;
+    state->bits = 0;
+    state->lencode = state->distcode = state->next = state->codes;
+    state->sane = 1;
+    state->back = -1;
+    Tracev((stderr, "inflate: reset\n"));
+    return Z_OK;
+}
 
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef
-    *blocks;            /* current inflate_blocks state */
+int ZEXPORT inflateReset(
+    z_streamp strm)
+{
+    struct inflate_state FAR *state;
 
-};
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    state->wsize = 0;
+    state->whave = 0;
+    state->wnext = 0;
+    return inflateResetKeep(strm);
+}
 
+int ZEXPORT inflateReset2(
+    z_streamp strm,
+    int windowBits)
+{
+    int wrap;
+    struct inflate_state FAR *state;
 
-ZEXPORT(int) inflateReset( /* z) */
-z_streamp z )
+    /* get the state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* extract wrap request from windowBits parameter */
+    if (windowBits < 0) {
+        wrap = 0;
+        windowBits = -windowBits;
+    }
+    else {
+        wrap = (windowBits >> 4) + 5;
+#ifdef GUNZIP
+        if (windowBits < 48)
+            windowBits &= 15;
+#endif
+    }
+
+    /* set number of window bits, free window if different */
+    if (windowBits && (windowBits < 8 || windowBits > 15))
+        return Z_STREAM_ERROR;
+    if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+        ZFREE(strm, state->window);
+        state->window = Z_NULL;
+    }
+
+    /* update state and reset the rest of it */
+    state->wrap = wrap;
+    state->wbits = (unsigned)windowBits;
+    return inflateReset(strm);
+}
+
+int ZEXPORT inflateInit2_(
+    z_streamp strm,
+    int windowBits,
+    const char *version,
+    int stream_size)
 {
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, Z_NULL);
-  Tracev((stderr, "inflate: reset\n"));
-  return Z_OK;
+    int ret;
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL) return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+#endif
+    }
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zfree = zcfree;
+#endif
+    state = (struct inflate_state FAR *)
+            ZALLOC(strm, 1, sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (struct internal_state FAR *)state;
+    state->strm = strm;
+    state->window = Z_NULL;
+    state->mode = HEAD;     /* to pass state test in inflateReset2() */
+    ret = inflateReset2(strm, windowBits);
+    if (ret != Z_OK) {
+        ZFREE(strm, state);
+        strm->state = Z_NULL;
+    }
+    return ret;
 }
 
-
-ZEXPORT(int) inflateEnd( /* z) */
-z_streamp z )
+int ZEXPORT inflateInit_(
+    z_streamp strm,
+    const char *version,
+    int stream_size)
 {
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z);
-  ZFREE(z, z->state);
-  z->state = Z_NULL;
-  Tracev((stderr, "inflate: end\n"));
-  return Z_OK;
+    return inflateInit2_(strm, DEF_WBITS, version, stream_size);
 }
 
+#ifndef Z_FREETYPE
 
-ZEXPORT(int) inflateInit2_( /* z, w, version, stream_size) */
-z_streamp z,
-int w,
-const char *version,
-int stream_size )
+int ZEXPORT inflatePrime(
+    z_streamp strm,
+    int bits,
+    int value)
 {
-  if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-      stream_size != sizeof(z_stream))
-      return Z_VERSION_ERROR;
+    struct inflate_state FAR *state;
 
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->msg = Z_NULL;
-  if (z->zalloc == Z_NULL)
-  {
-    z->zalloc = zcalloc;
-    z->opaque = (voidpf)0;
-  }
-  if (z->zfree == Z_NULL) z->zfree = zcfree;
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (bits < 0) {
+        state->hold = 0;
+        state->bits = 0;
+        return Z_OK;
+    }
+    if (bits > 16 || state->bits + (uInt)bits > 32) return Z_STREAM_ERROR;
+    value &= (1L << bits) - 1;
+    state->hold += (unsigned)value << state->bits;
+    state->bits += (uInt)bits;
+    return Z_OK;
+}
 
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
+#endif  /* Z_FREETYPE */
 
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
+/*
+   Return state with length and distance decoding tables and index sizes set to
+   fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+   If BUILDFIXED is defined, then instead this routine builds the tables the
+   first time it's called, and returns those tables the first time and
+   thereafter.  This reduces the size of the code by about 2K bytes, in
+   exchange for a little execution time.  However, BUILDFIXED should not be
+   used for threaded applications, since the rewriting of the tables and virgin
+   may not be thread-safe.
+ */
+local void fixedtables(
+    struct inflate_state FAR *state)
+{
+#ifdef BUILDFIXED
+    static int virgin = 1;
+    static code *lenfix, *distfix;
+    static code fixed[544];
 
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-      inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Tracev((stderr, "inflate: allocated\n"));
+    /* build fixed huffman tables if first call (may not be thread safe) */
+    if (virgin) {
+        unsigned sym, bits;
+        static code *next;
 
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
+        /* literal/length table */
+        sym = 0;
+        while (sym < 144) state->lens[sym++] = 8;
+        while (sym < 256) state->lens[sym++] = 9;
+        while (sym < 280) state->lens[sym++] = 7;
+        while (sym < 288) state->lens[sym++] = 8;
+        next = fixed;
+        lenfix = next;
+        bits = 9;
+        inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work);
+
+        /* distance table */
+        sym = 0;
+        while (sym < 32) state->lens[sym++] = 5;
+        distfix = next;
+        bits = 5;
+        inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work);
+
+        /* do this just once */
+        virgin = 0;
+    }
+#else /* !BUILDFIXED */
+#   include "inffixed.h"
+#endif /* BUILDFIXED */
+    state->lencode = lenfix;
+    state->lenbits = 9;
+    state->distcode = distfix;
+    state->distbits = 5;
 }
 
+#ifdef MAKEFIXED
+#include <stdio.h>
 
+/*
+   Write out the inffixed.h that is #include'd above.  Defining MAKEFIXED also
+   defines BUILDFIXED, so the tables are built on the fly.  makefixed() writes
+   those tables to stdout, which would be piped to inffixed.h.  A small program
+   can simply call makefixed to do this:
 
-#undef  NEEDBYTE
-#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
+    void makefixed(void);
 
-#undef  NEXTBYTE
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
+    int main(void)
+    {
+        makefixed();
+        return 0;
+    }
 
+   Then that can be linked with zlib built with MAKEFIXED defined and run:
 
-ZEXPORT(int) inflate( /* z, f) */
-z_streamp z,
-int f )
+    a.out > inffixed.h
+ */
+void makefixed()
 {
-  int r;
-  uInt b;
+    unsigned low, size;
+    struct inflate_state state;
 
-  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
-    return Z_STREAM_ERROR;
-  f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-      /* fall through */
-    case FLAG:
-      NEEDBYTE
-      b = NEXTBYTE;
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Tracev((stderr, "inflate: zlib header ok\n"));
-      if (!(b & PRESET_DICT))
-      {
-        z->state->mode = BLOCKS;
-        break;
-      }
-      z->state->mode = DICT4;
-      /* fall through */
-    case DICT4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = DICT3;
-      /* fall through */
-    case DICT3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = DICT2;
-      /* fall through */
-    case DICT2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = DICT1;
-      /* fall through */
-    case DICT1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-      z->adler = z->state->sub.check.need;
-      z->state->mode = DICT0;
-      return Z_NEED_DICT;
-    case DICT0:
-      z->state->mode = BAD;
-      z->msg = (char*)"need dictionary";
-      z->state->sub.marker = 0;       /* can try inflateSync */
-      return Z_STREAM_ERROR;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r == Z_OK)
-        r = f;
-      if (r != Z_STREAM_END)
-        return r;
-      r = f;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-      /* fall through */
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-      /* fall through */
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-      /* fall through */
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-      /* fall through */
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
+    fixedtables(&state);
+    puts("    /* inffixed.h -- table for decoding fixed codes");
+    puts("     * Generated automatically by makefixed().");
+    puts("     */");
+    puts("");
+    puts("    /* WARNING: this file should *not* be used by applications.");
+    puts("       It is part of the implementation of this library and is");
+    puts("       subject to change. Applications should only use zlib.h.");
+    puts("     */");
+    puts("");
+    size = 1U << 9;
+    printf("    static const code lenfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 7) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
+               state.lencode[low].bits, state.lencode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+    size = 1U << 5;
+    printf("\n    static const code distfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 6) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits,
+               state.distcode[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+}
+#endif /* MAKEFIXED */
+
+/*
+   Update the window with the last wsize (normally 32K) bytes written before
+   returning.  If window does not exist yet, create it.  This is only called
+   when a window is already in use, or when output has been written during this
+   inflate call, but the end of the deflate stream has not been reached yet.
+   It is also called to create a window for dictionary data when a dictionary
+   is loaded.
+
+   Providing output buffers larger than 32K to inflate() should provide a speed
+   advantage, since only the last 32K of output is copied to the sliding window
+   upon return from inflate(), and since all distances after the first 32K of
+   output will fall in the output data, making match copies simpler and faster.
+   The advantage may be dependent on the size of the processor's data caches.
+ */
+local int updatewindow(
+    z_streamp strm,
+    const Bytef *end,
+    unsigned copy)
+{
+    struct inflate_state FAR *state;
+    unsigned dist;
+
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* if it hasn't been done already, allocate space for the window */
+    if (state->window == Z_NULL) {
+        state->window = (unsigned char FAR *)
+                        ZALLOC(strm, 1U << state->wbits,
+                               sizeof(unsigned char));
+        if (state->window == Z_NULL) return 1;
+    }
+
+    /* if window not in use yet, initialize */
+    if (state->wsize == 0) {
+        state->wsize = 1U << state->wbits;
+        state->wnext = 0;
+        state->whave = 0;
+    }
+
+    /* copy state->wsize or less output bytes into the circular window */
+    if (copy >= state->wsize) {
+        zmemcpy(state->window, end - state->wsize, state->wsize);
+        state->wnext = 0;
+        state->whave = state->wsize;
+    }
+    else {
+        dist = state->wsize - state->wnext;
+        if (dist > copy) dist = copy;
+        zmemcpy(state->window + state->wnext, end - copy, dist);
+        copy -= dist;
+        if (copy) {
+            zmemcpy(state->window, end - copy, copy);
+            state->wnext = copy;
+            state->whave = state->wsize;
+        }
+        else {
+            state->wnext += dist;
+            if (state->wnext == state->wsize) state->wnext = 0;
+            if (state->whave < state->wsize) state->whave += dist;
+        }
+    }
+    return 0;
+}
+
+/* Macros for inflate(): */
+
+/* check function to use adler32() for zlib or crc32() for gzip */
+#ifdef GUNZIP
+#  define UPDATE(check, buf, len) \
+    (state->flags ? crc32(check, buf, len) : adler32(check, buf, len))
+#else
+#  define UPDATE(check, buf, len) adler32(check, buf, len)
+#endif
+
+/* check macros for header crc */
+#ifdef GUNZIP
+#  define CRC2(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        check = crc32(check, hbuf, 2); \
+    } while (0)
+
+#  define CRC4(check, word) \
+    do { \
+        hbuf[0] = (unsigned char)(word); \
+        hbuf[1] = (unsigned char)((word) >> 8); \
+        hbuf[2] = (unsigned char)((word) >> 16); \
+        hbuf[3] = (unsigned char)((word) >> 24); \
+        check = crc32(check, hbuf, 4); \
+    } while (0)
+#endif
+
+/* Load registers with state in inflate() for speed */
+#define LOAD() \
+    do { \
+        put = strm->next_out; \
+        left = strm->avail_out; \
+        next = strm->next_in; \
+        have = strm->avail_in; \
+        hold = state->hold; \
+        bits = state->bits; \
+    } while (0)
+
+/* Restore state from registers in inflate() */
+#define RESTORE() \
+    do { \
+        strm->next_out = put; \
+        strm->avail_out = left; \
+        strm->next_in = next; \
+        strm->avail_in = have; \
+        state->hold = hold; \
+        state->bits = bits; \
+    } while (0)
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflate()
+   if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        if (have == 0) goto inf_leave; \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflate(). */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n < 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/*
+   inflate() uses a state machine to process as much input data and generate as
+   much output data as possible before returning.  The state machine is
+   structured roughly as follows:
+
+    for (;;) switch (state) {
+    ...
+    case STATEn:
+        if (not enough input data or output space to make progress)
+            return;
+        ... make progress ...
+        state = STATEm;
+        break;
+    ...
+    }
+
+   so when inflate() is called again, the same case is attempted again, and
+   if the appropriate resources are provided, the machine proceeds to the
+   next state.  The NEEDBITS() macro is usually the way the state evaluates
+   whether it can proceed or should return.  NEEDBITS() does the return if
+   the requested bits are not available.  The typical use of the BITS macros
+   is:
+
+        NEEDBITS(n);
+        ... do something with BITS(n) ...
+        DROPBITS(n);
+
+   where NEEDBITS(n) either returns from inflate() if there isn't enough
+   input left to load n bits into the accumulator, or it continues.  BITS(n)
+   gives the low n bits in the accumulator.  When done, DROPBITS(n) drops
+   the low n bits off the accumulator.  INITBITS() clears the accumulator
+   and sets the number of available bits to zero.  BYTEBITS() discards just
+   enough bits to put the accumulator on a byte boundary.  After BYTEBITS()
+   and a NEEDBITS(8), then BITS(8) would return the next byte in the stream.
+
+   NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return
+   if there is no input available.  The decoding of variable length codes uses
+   PULLBYTE() directly in order to pull just enough bytes to decode the next
+   code, and no more.
+
+   Some states loop until they get enough input, making sure that enough
+   state information is maintained to continue the loop where it left off
+   if NEEDBITS() returns in the loop.  For example, want, need, and keep
+   would all have to actually be part of the saved state in case NEEDBITS()
+   returns:
+
+    case STATEw:
+        while (want < need) {
+            NEEDBITS(n);
+            keep[want++] = BITS(n);
+            DROPBITS(n);
+        }
+        state = STATEx;
+    case STATEx:
+
+   As shown above, if the next state is also the next case, then the break
+   is omitted.
+
+   A state may also return if there is not enough output space available to
+   complete that state.  Those states are copying stored data, writing a
+   literal byte, and copying a matching string.
+
+   When returning, a "goto inf_leave" is used to update the total counters,
+   update the check value, and determine whether any progress has been made
+   during that inflate() call in order to return the proper return code.
+   Progress is defined as a change in either strm->avail_in or strm->avail_out.
+   When there is a window, goto inf_leave will update the window with the last
+   output written.  If a goto inf_leave occurs in the middle of decompression
+   and there is no window currently, goto inf_leave will create one and copy
+   output to the window for the next call of inflate().
+
+   In this implementation, the flush parameter of inflate() only affects the
+   return code (per zlib.h).  inflate() always writes as much as possible to
+   strm->next_out, given the space available and the provided input--the effect
+   documented in zlib.h of Z_SYNC_FLUSH.  Furthermore, inflate() always defers
+   the allocation of and copying into a sliding window until necessary, which
+   provides the effect documented in zlib.h for Z_FINISH when the entire input
+   stream available.  So the only thing the flush parameter actually does is:
+   when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
+   will return Z_BUF_ERROR if it has not reached the end of the stream.
+ */
+
+int ZEXPORT inflate(
+    z_streamp strm,
+    int flush)
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have, left;        /* available input and output */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned in, out;           /* save starting available input and output */
+    unsigned copy;              /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+#ifdef GUNZIP
+    unsigned char hbuf[4];      /* buffer for gzip header crc calculation */
+#endif
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+
+    if (inflateStateCheck(strm) || strm->next_out == Z_NULL ||
+        (strm->next_in == Z_NULL && strm->avail_in != 0))
+        return Z_STREAM_ERROR;
+
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->mode == TYPE) state->mode = TYPEDO;      /* skip check */
+    LOAD();
+    in = have;
+    out = left;
+    ret = Z_OK;
+    for (;;)
+        switch (state->mode) {
+        case HEAD:
+            if (state->wrap == 0) {
+                state->mode = TYPEDO;
+                break;
+            }
+            NEEDBITS(16);
+#ifdef GUNZIP
+            if ((state->wrap & 2) && hold == 0x8b1f) {  /* gzip header */
+                if (state->wbits == 0)
+                    state->wbits = 15;
+                state->check = crc32(0L, Z_NULL, 0);
+                CRC2(state->check, hold);
+                INITBITS();
+                state->mode = FLAGS;
+                break;
+            }
+            state->flags = 0;           /* expect zlib header */
+            if (state->head != Z_NULL)
+                state->head->done = -1;
+            if (!(state->wrap & 1) ||   /* check if zlib header allowed */
+#else
+            if (
+#endif
+                ((BITS(8) << 8) + (hold >> 8)) % 31) {
+                strm->msg = (char *)"incorrect header check";
+                state->mode = BAD;
+                break;
+            }
+            if (BITS(4) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            DROPBITS(4);
+            len = BITS(4) + 8;
+            if (state->wbits == 0)
+                state->wbits = len;
+            if (len > 15 || len > state->wbits) {
+                strm->msg = (char *)"invalid window size";
+                state->mode = BAD;
+                break;
+            }
+            state->dmax = 1U << len;
+            Tracev((stderr, "inflate:   zlib header ok\n"));
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = hold & 0x200 ? DICTID : TYPE;
+            INITBITS();
+            break;
+#ifdef GUNZIP
+        case FLAGS:
+            NEEDBITS(16);
+            state->flags = (int)(hold);
+            if ((state->flags & 0xff) != Z_DEFLATED) {
+                strm->msg = (char *)"unknown compression method";
+                state->mode = BAD;
+                break;
+            }
+            if (state->flags & 0xe000) {
+                strm->msg = (char *)"unknown header flags set";
+                state->mode = BAD;
+                break;
+            }
+            if (state->head != Z_NULL)
+                state->head->text = (int)((hold >> 8) & 1);
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
+            INITBITS();
+            state->mode = TIME;
+        case TIME:
+            NEEDBITS(32);
+            if (state->head != Z_NULL)
+                state->head->time = hold;
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC4(state->check, hold);
+            INITBITS();
+            state->mode = OS;
+        case OS:
+            NEEDBITS(16);
+            if (state->head != Z_NULL) {
+                state->head->xflags = (int)(hold & 0xff);
+                state->head->os = (int)(hold >> 8);
+            }
+            if ((state->flags & 0x0200) && (state->wrap & 4))
+                CRC2(state->check, hold);
+            INITBITS();
+            state->mode = EXLEN;
+        case EXLEN:
+            if (state->flags & 0x0400) {
+                NEEDBITS(16);
+                state->length = (unsigned)(hold);
+                if (state->head != Z_NULL)
+                    state->head->extra_len = (unsigned)hold;
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    CRC2(state->check, hold);
+                INITBITS();
+            }
+            else if (state->head != Z_NULL)
+                state->head->extra = Z_NULL;
+            state->mode = EXTRA;
+        case EXTRA:
+            if (state->flags & 0x0400) {
+                copy = state->length;
+                if (copy > have) copy = have;
+                if (copy) {
+                    if (state->head != Z_NULL &&
+                        state->head->extra != Z_NULL) {
+                        len = state->head->extra_len - state->length;
+                        zmemcpy(state->head->extra + len, next,
+                                len + copy > state->head->extra_max ?
+                                state->head->extra_max - len : copy);
+                    }
+                    if ((state->flags & 0x0200) && (state->wrap & 4))
+                        state->check = crc32(state->check, next, copy);
+                    have -= copy;
+                    next += copy;
+                    state->length -= copy;
+                }
+                if (state->length) goto inf_leave;
+            }
+            state->length = 0;
+            state->mode = NAME;
+        case NAME:
+            if (state->flags & 0x0800) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->name != Z_NULL &&
+                            state->length < state->head->name_max)
+                        state->head->name[state->length++] = (Bytef)len;
+                } while (len && copy < have);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->name = Z_NULL;
+            state->length = 0;
+            state->mode = COMMENT;
+        case COMMENT:
+            if (state->flags & 0x1000) {
+                if (have == 0) goto inf_leave;
+                copy = 0;
+                do {
+                    len = (unsigned)(next[copy++]);
+                    if (state->head != Z_NULL &&
+                            state->head->comment != Z_NULL &&
+                            state->length < state->head->comm_max)
+                        state->head->comment[state->length++] = (Bytef)len;
+                } while (len && copy < have);
+                if ((state->flags & 0x0200) && (state->wrap & 4))
+                    state->check = crc32(state->check, next, copy);
+                have -= copy;
+                next += copy;
+                if (len) goto inf_leave;
+            }
+            else if (state->head != Z_NULL)
+                state->head->comment = Z_NULL;
+            state->mode = HCRC;
+        case HCRC:
+            if (state->flags & 0x0200) {
+                NEEDBITS(16);
+                if ((state->wrap & 4) && hold != (state->check & 0xffff)) {
+                    strm->msg = (char *)"header crc mismatch";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+            }
+            if (state->head != Z_NULL) {
+                state->head->hcrc = (int)((state->flags >> 9) & 1);
+                state->head->done = 1;
+            }
+            strm->adler = state->check = crc32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+            break;
+#endif
+        case DICTID:
+            NEEDBITS(32);
+            strm->adler = state->check = ZSWAP32(hold);
+            INITBITS();
+            state->mode = DICT;
+        case DICT:
+            if (state->havedict == 0) {
+                RESTORE();
+                return Z_NEED_DICT;
+            }
+            strm->adler = state->check = adler32(0L, Z_NULL, 0);
+            state->mode = TYPE;
+        case TYPE:
+            if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
+        case TYPEDO:
+            if (state->last) {
+                BYTEBITS();
+                state->mode = CHECK;
+                break;
+            }
+            NEEDBITS(3);
+            state->last = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                fixedtables(state);
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = LEN_;             /* decode codes */
+                if (flush == Z_TREES) {
+                    DROPBITS(2);
+                    goto inf_leave;
+                }
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        state->last ? " (last)" : ""));
+                state->mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                state->mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+        case STORED:
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                state->mode = BAD;
+                break;
+            }
+            state->length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %u\n",
+                    state->length));
+            INITBITS();
+            state->mode = COPY_;
+            if (flush == Z_TREES) goto inf_leave;
+        case COPY_:
+            state->mode = COPY;
+        case COPY:
+            copy = state->length;
+            if (copy) {
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                if (copy == 0) goto inf_leave;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                state->length -= copy;
+                break;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            state->mode = TYPE;
+            break;
+        case TABLE:
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+#ifndef PKZIP_BUG_WORKAROUND
+            if (state->nlen > 286 || state->ndist > 30) {
+                strm->msg = (char *)"too many length or distance symbols";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+            state->have = 0;
+            state->mode = LENLENS;
+        case LENLENS:
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 7;
+            ret = inflate_table(CODES, state->lens, 19, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+            state->have = 0;
+            state->mode = CODELENS;
+        case CODELENS:
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = state->lencode[BITS(state->lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            state->mode = BAD;
+                            break;
+                        }
+                        len = state->lens[state->have - 1];
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        state->mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
 
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Tracev((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-      /* fall through */
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-#ifdef NEED_DUMMY_RETURN
-  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+            /* handle error breaks in while */
+            if (state->mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                state->mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftrees.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            state->lencode = (const code FAR *)(state->next);
+            state->lenbits = 9;
+            ret = inflate_table(LENS, state->lens, state->nlen, &(state->next),
+                                &(state->lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                state->mode = BAD;
+                break;
+            }
+            state->distcode = (const code FAR *)(state->next);
+            state->distbits = 6;
+            ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist,
+                            &(state->next), &(state->distbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                state->mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            state->mode = LEN_;
+            if (flush == Z_TREES) goto inf_leave;
+        case LEN_:
+            state->mode = LEN;
+        case LEN:
+            if (have >= 6 && left >= 258) {
+                RESTORE();
+                inflate_fast(strm, out);
+                LOAD();
+                if (state->mode == TYPE)
+                    state->back = -1;
+                break;
+            }
+            state->back = 0;
+            for (;;) {
+                here = state->lencode[BITS(state->lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            state->length = (unsigned)here.val;
+            if ((int)(here.op) == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                state->mode = LIT;
+                break;
+            }
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                state->back = -1;
+                state->mode = TYPE;
+                break;
+            }
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                state->mode = BAD;
+                break;
+            }
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = LENEXT;
+        case LENEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->length += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+            Tracevv((stderr, "inflate:         length %u\n", state->length));
+            state->was = state->length;
+            state->mode = DIST;
+        case DIST:
+            for (;;) {
+                here = state->distcode[BITS(state->distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = state->distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+                state->back += last.bits;
+            }
+            DROPBITS(here.bits);
+            state->back += here.bits;
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                state->mode = BAD;
+                break;
+            }
+            state->offset = (unsigned)here.val;
+            state->extra = (unsigned)(here.op) & 15;
+            state->mode = DISTEXT;
+        case DISTEXT:
+            if (state->extra) {
+                NEEDBITS(state->extra);
+                state->offset += BITS(state->extra);
+                DROPBITS(state->extra);
+                state->back += state->extra;
+            }
+#ifdef INFLATE_STRICT
+            if (state->offset > state->dmax) {
+                strm->msg = (char *)"invalid distance too far back";
+                state->mode = BAD;
+                break;
+            }
+#endif
+            Tracevv((stderr, "inflate:         distance %u\n", state->offset));
+            state->mode = MATCH;
+        case MATCH:
+            if (left == 0) goto inf_leave;
+            copy = out - left;
+            if (state->offset > copy) {         /* copy from window */
+                copy = state->offset - copy;
+                if (copy > state->whave) {
+                    if (state->sane) {
+                        strm->msg = (char *)"invalid distance too far back";
+                        state->mode = BAD;
+                        break;
+                    }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                    Trace((stderr, "inflate.c too far\n"));
+                    copy -= state->whave;
+                    if (copy > state->length) copy = state->length;
+                    if (copy > left) copy = left;
+                    left -= copy;
+                    state->length -= copy;
+                    do {
+                        *put++ = 0;
+                    } while (--copy);
+                    if (state->length == 0) state->mode = LEN;
+                    break;
 #endif
-}
+                }
+                if (copy > state->wnext) {
+                    copy -= state->wnext;
+                    from = state->window + (state->wsize - copy);
+                }
+                else
+                    from = state->window + (state->wnext - copy);
+                if (copy > state->length) copy = state->length;
+            }
+            else {                              /* copy from output */
+                from = put - state->offset;
+                copy = state->length;
+            }
+            if (copy > left) copy = left;
+            left -= copy;
+            state->length -= copy;
+            do {
+                *put++ = *from++;
+            } while (--copy);
+            if (state->length == 0) state->mode = LEN;
+            break;
+        case LIT:
+            if (left == 0) goto inf_leave;
+            *put++ = (unsigned char)(state->length);
+            left--;
+            state->mode = LEN;
+            break;
+        case CHECK:
+            if (state->wrap) {
+                NEEDBITS(32);
+                out -= left;
+                strm->total_out += out;
+                state->total += out;
+                if ((state->wrap & 4) && out)
+                    strm->adler = state->check =
+                        UPDATE(state->check, put - out, out);
+                out = left;
+                if ((state->wrap & 4) && (
+#ifdef GUNZIP
+                     state->flags ? hold :
+#endif
+                     ZSWAP32(hold)) != state->check) {
+                    strm->msg = (char *)"incorrect data check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   check matches trailer\n"));
+            }
+#ifdef GUNZIP
+            state->mode = LENGTH;
+        case LENGTH:
+            if (state->wrap && state->flags) {
+                NEEDBITS(32);
+                if (hold != (state->total & 0xffffffffUL)) {
+                    strm->msg = (char *)"incorrect length check";
+                    state->mode = BAD;
+                    break;
+                }
+                INITBITS();
+                Tracev((stderr, "inflate:   length matches trailer\n"));
+            }
+#endif
+            state->mode = DONE;
+        case DONE:
+            ret = Z_STREAM_END;
+            goto inf_leave;
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+        case MEM:
+            return Z_MEM_ERROR;
+        case SYNC:
+        default:
+            return Z_STREAM_ERROR;
+        }
 
+    /*
+       Return from inflate(), updating the total counts and the check value.
+       If there was no progress during the inflate() call, return a buffer
+       error.  Call updatewindow() to create and/or update the window state.
+       Note: a memory error from inflate() is non-recoverable.
+     */
+  inf_leave:
+    RESTORE();
+    if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+            (state->mode < CHECK || flush != Z_FINISH)))
+        if (updatewindow(strm, strm->next_out, out - strm->avail_out)) {
+            state->mode = MEM;
+            return Z_MEM_ERROR;
+        }
+    in -= strm->avail_in;
+    out -= strm->avail_out;
+    strm->total_in += in;
+    strm->total_out += out;
+    state->total += out;
+    if ((state->wrap & 4) && out)
+        strm->adler = state->check =
+            UPDATE(state->check, strm->next_out - out, out);
+    strm->data_type = (int)state->bits + (state->last ? 64 : 0) +
+                      (state->mode == TYPE ? 128 : 0) +
+                      (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
+    if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
+        ret = Z_BUF_ERROR;
+    return ret;
+}
+
+int ZEXPORT inflateEnd(
+    z_streamp strm)
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm))
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->window != Z_NULL) ZFREE(strm, state->window);
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}
+
+#ifndef Z_FREETYPE
+
+int ZEXPORT inflateGetDictionary(
+    z_streamp strm,
+    Bytef *dictionary,
+    uInt *dictLength)
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* copy dictionary */
+    if (state->whave && dictionary != Z_NULL) {
+        zmemcpy(dictionary, state->window + state->wnext,
+                state->whave - state->wnext);
+        zmemcpy(dictionary + state->whave - state->wnext,
+                state->window, state->wnext);
+    }
+    if (dictLength != Z_NULL)
+        *dictLength = state->whave;
+    return Z_OK;
+}
+
+int ZEXPORT inflateSetDictionary(
+    z_streamp strm,
+    const Bytef *dictionary,
+    uInt dictLength)
+{
+    struct inflate_state FAR *state;
+    unsigned long dictid;
+    int ret;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (state->wrap != 0 && state->mode != DICT)
+        return Z_STREAM_ERROR;
+
+    /* check for correct dictionary identifier */
+    if (state->mode == DICT) {
+        dictid = adler32(0L, Z_NULL, 0);
+        dictid = adler32(dictid, dictionary, dictLength);
+        if (dictid != state->check)
+            return Z_DATA_ERROR;
+    }
+
+    /* copy dictionary to window using updatewindow(), which will amend the
+       existing dictionary if appropriate */
+    ret = updatewindow(strm, dictionary + dictLength, dictLength);
+    if (ret) {
+        state->mode = MEM;
+        return Z_MEM_ERROR;
+    }
+    state->havedict = 1;
+    Tracev((stderr, "inflate:   dictionary set\n"));
+    return Z_OK;
+}
+
+int ZEXPORT inflateGetHeader(
+    z_streamp strm,
+    gz_headerp head)
+{
+    struct inflate_state FAR *state;
+
+    /* check state */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+    /* save header structure */
+    state->head = head;
+    head->done = 0;
+    return Z_OK;
+}
+
+/*
+   Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff.  Return when found
+   or when out of input.  When called, *have is the number of pattern bytes
+   found in order so far, in 0..3.  On return *have is updated to the new
+   state.  If on return *have equals four, then the pattern was found and the
+   return value is how many bytes were read including the last byte of the
+   pattern.  If *have is less than four, then the pattern has not been found
+   yet and the return value is len.  In the latter case, syncsearch() can be
+   called again with more data and the *have state.  *have is initialized to
+   zero for the first call.
+ */
+local unsigned syncsearch(
+    unsigned FAR *have,
+    const unsigned char FAR *buf,
+    unsigned len)
+{
+    unsigned got;
+    unsigned next;
+
+    got = *have;
+    next = 0;
+    while (next < len && got < 4) {
+        if ((int)(buf[next]) == (got < 2 ? 0 : 0xff))
+            got++;
+        else if (buf[next])
+            got = 0;
+        else
+            got = 4 - got;
+        next++;
+    }
+    *have = got;
+    return next;
+}
+
+int ZEXPORT inflateSync(
+    z_streamp strm)
+{
+    unsigned len;               /* number of bytes to look at or looked at */
+    unsigned long in, out;      /* temporary to save total_in and total_out */
+    unsigned char buf[4];       /* to restore bit buffer to byte string */
+    struct inflate_state FAR *state;
+
+    /* check parameters */
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR;
+
+    /* if first time, start search in bit buffer */
+    if (state->mode != SYNC) {
+        state->mode = SYNC;
+        state->hold <<= state->bits & 7;
+        state->bits -= state->bits & 7;
+        len = 0;
+        while (state->bits >= 8) {
+            buf[len++] = (unsigned char)(state->hold);
+            state->hold >>= 8;
+            state->bits -= 8;
+        }
+        state->have = 0;
+        syncsearch(&(state->have), buf, len);
+    }
+
+    /* search available input */
+    len = syncsearch(&(state->have), strm->next_in, strm->avail_in);
+    strm->avail_in -= len;
+    strm->next_in += len;
+    strm->total_in += len;
+
+    /* return no joy or set up to restart inflate() on a new block */
+    if (state->have != 4) return Z_DATA_ERROR;
+    in = strm->total_in;  out = strm->total_out;
+    inflateReset(strm);
+    strm->total_in = in;  strm->total_out = out;
+    state->mode = TYPE;
+    return Z_OK;
+}
+
+#endif  /* !Z_FREETYPE */
+
+/*
+   Returns true if inflate is currently at the end of a block generated by
+   Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+   implementation to provide an additional safety check. PPP uses
+   Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored
+   block. When decompressing, PPP checks that at the end of input packet,
+   inflate is waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(
+    z_streamp strm)
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    return state->mode == STORED && state->bits == 0;
+}
+
+#if !Z_FREETYPE
+
+int ZEXPORT inflateCopy(
+    z_streamp dest,
+    z_streamp source)
+{
+    struct inflate_state FAR *state;
+    struct inflate_state FAR *copy;
+    unsigned char FAR *window;
+    unsigned wsize;
+
+    /* check input */
+    if (inflateStateCheck(source) || dest == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)source->state;
+
+    /* allocate space */
+    copy = (struct inflate_state FAR *)
+           ZALLOC(source, 1, sizeof(struct inflate_state));
+    if (copy == Z_NULL) return Z_MEM_ERROR;
+    window = Z_NULL;
+    if (state->window != Z_NULL) {
+        window = (unsigned char FAR *)
+                 ZALLOC(source, 1U << state->wbits, sizeof(unsigned char));
+        if (window == Z_NULL) {
+            ZFREE(source, copy);
+            return Z_MEM_ERROR;
+        }
+    }
+
+    /* copy state */
+    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
+    zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
+    copy->strm = dest;
+    if (state->lencode >= state->codes &&
+        state->lencode <= state->codes + ENOUGH - 1) {
+        copy->lencode = copy->codes + (state->lencode - state->codes);
+        copy->distcode = copy->codes + (state->distcode - state->codes);
+    }
+    copy->next = copy->codes + (state->next - state->codes);
+    if (window != Z_NULL) {
+        wsize = 1U << state->wbits;
+        zmemcpy(window, state->window, wsize);
+    }
+    copy->window = window;
+    dest->state = (struct internal_state FAR *)copy;
+    return Z_OK;
+}
+
+#endif  /* !Z_FREETYPE */
+
+int ZEXPORT inflateUndermine(
+    z_streamp strm,
+    int subvert)
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+    state->sane = !subvert;
+    return Z_OK;
+#else
+    (void)subvert;
+    state->sane = 1;
+    return Z_DATA_ERROR;
+#endif
+}
+
+int ZEXPORT inflateValidate(
+    z_streamp strm,
+    int check)
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm)) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    if (check)
+        state->wrap |= 4;
+    else
+        state->wrap &= ~4;
+    return Z_OK;
+}
+
+#ifndef Z_FREETYPE
+
+long ZEXPORT inflateMark(
+    z_streamp strm)
+{
+    struct inflate_state FAR *state;
+
+    if (inflateStateCheck(strm))
+        return -(1L << 16);
+    state = (struct inflate_state FAR *)strm->state;
+    return (long)(((unsigned long)((long)state->back)) << 16) +
+        (state->mode == COPY ? state->length :
+            (state->mode == MATCH ? state->was - state->length : 0));
+}
+
+unsigned long ZEXPORT inflateCodesUsed(
+    z_streamp strm)
+{
+    struct inflate_state FAR *state;
+    if (inflateStateCheck(strm)) return (unsigned long)-1;
+    state = (struct inflate_state FAR *)strm->state;
+    return (unsigned long)(state->next - state->codes);
+}
+
+#endif  /* !Z_FREETYPE */
--- /dev/null
+++ b/src/gzip/inflate.h
@@ -1,0 +1,130 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#ifndef INFLATE_H
+#define INFLATE_H
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip decoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+    HEAD = 16180,   /* i: waiting for magic header */
+    FLAGS,      /* i: waiting for method and flags (gzip) */
+    TIME,       /* i: waiting for modification time (gzip) */
+    OS,         /* i: waiting for extra flags and operating system (gzip) */
+    EXLEN,      /* i: waiting for extra length (gzip) */
+    EXTRA,      /* i: waiting for extra bytes (gzip) */
+    NAME,       /* i: waiting for end of file name (gzip) */
+    COMMENT,    /* i: waiting for end of comment (gzip) */
+    HCRC,       /* i: waiting for header crc (gzip) */
+    DICTID,     /* i: waiting for dictionary check value */
+    DICT,       /* waiting for inflateSetDictionary() call */
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        COPY_,      /* i/o: same as COPY below, but only first time in */
+        COPY,       /* i/o: waiting for input or output to copy stored block */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+        LENLENS,    /* i: waiting for code length code lengths */
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */
+            LEN_,       /* i: same as LEN below, but only first time in */
+            LEN,        /* i: waiting for length/lit/eob code */
+            LENEXT,     /* i: waiting for length extra bits */
+            DIST,       /* i: waiting for distance code */
+            DISTEXT,    /* i: waiting for distance extra bits */
+            MATCH,      /* o: waiting for output space to copy string */
+            LIT,        /* o: waiting for output space to write literal */
+    CHECK,      /* i: waiting for 32-bit check value */
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD,        /* got a data error -- remain here until reset */
+    MEM,        /* got an inflate() memory error -- remain here until reset */
+    SYNC        /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+    Process header:
+        HEAD -> (gzip) or (zlib) or (raw)
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+                  HCRC -> TYPE
+        (zlib) -> DICTID or TYPE
+        DICTID -> DICT -> TYPE
+        (raw) -> TYPEDO
+    Read deflate blocks:
+            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+            STORED -> COPY_ -> COPY -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN_
+            LEN_ -> LEN
+    Read deflate codes in fixed or dynamic block:
+                LEN -> LENEXT or LIT or TYPE
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+                LIT -> LEN
+    Process trailer:
+        CHECK -> LENGTH -> DONE
+ */
+
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+   including the allocated sliding window, which is up to 32K bytes. */
+struct inflate_state {
+    z_streamp strm;             /* pointer back to this zlib stream */
+    inflate_mode mode;          /* current inflate mode */
+    int last;                   /* true if processing last block */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
+                                   bit 2 true to validate check value */
+    int havedict;               /* true if dictionary provided */
+    int flags;                  /* gzip header method and flags (0 if zlib) */
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
+    unsigned long check;        /* protected copy of check value */
+    unsigned long total;        /* protected copy of output count */
+    gz_headerp head;            /* where to save gzip header information */
+        /* sliding window */
+    unsigned wbits;             /* log base 2 of requested window size */
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* bit accumulator */
+    unsigned long hold;         /* input bit accumulator */
+    unsigned bits;              /* number of bits in "in" */
+        /* for string and stored block copying */
+    unsigned length;            /* literal or length of data to copy */
+    unsigned offset;            /* distance back to copy string from */
+        /* for table and code decoding */
+    unsigned extra;             /* extra bits needed */
+        /* fixed and dynamic code tables */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+    int sane;                   /* if false, allow invalid distance too far */
+    int back;                   /* bits back of last unprocessed length/lit */
+    unsigned was;               /* initial length of match */
+};
+
+#endif  /* INFLATE_H */
--- a/src/gzip/inftrees.c
+++ b/src/gzip/inftrees.c
@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2002 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -6,15 +6,10 @@
 #include "zutil.h"
 #include "inftrees.h"
 
-#if !defined(BUILDFIXED) && !defined(STDC)
-#  define BUILDFIXED   /* non ANSI compilers may not accept inffixed.h */
-#endif
+#define MAXBITS 15
 
-
-#if 0
-local const char inflate_copyright[] =
-   " inflate 1.1.4 Copyright 1995-2002 Mark Adler ";
-#endif
+const char inflate_copyright[] =
+   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -22,447 +17,288 @@
   copyright string in the executable of your product.
  */
 
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    const uIntf *,      /* list of base values for non-simple codes */
-    const uIntf *,      /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    inflate_huft *,     /* space for trees */
-    uInt *,             /* hufts used in space */
-    uIntf * ));         /* space for values */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(
+    codetype type,
+    unsigned short FAR *lens,
+    unsigned codes,
+    code FAR * FAR *table,
+    unsigned FAR *bits,
+    unsigned short FAR *work)
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code here;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    unsigned match;             /* use base and extra for symbol >= match */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
         3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
+    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
+        8193, 12289, 16385, 24577, 0, 0};
+    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+        28, 28, 29, 29, 64, 64};
 
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
 
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
 
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
 
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
 
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
 
-local int huft_build( /* b, n, s, d, e, t, m, hp, hn, v) */
-uIntf *b,               /* code lengths in bits (all assumed <= BMAX) */
-uInt n,                 /* number of codes (assumed <= 288) */
-uInt s,                 /* number of simple-valued codes (0..s-1) */
-const uIntf *d,         /* list of base values for non-simple codes */
-const uIntf *e,         /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t,  /* result: starting table */
-uIntf *m,               /* maximum lookup bits, returns actual */
-inflate_huft *hp,       /* space for trees */
-uInt *hn,               /* hufts used in space */
-uIntf *v                /* working area: values in order of bit length */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), or Z_DATA_ERROR if the input is invalid. */
-)
-{
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) {                     /* no symbols to code at all */
+        here.op = (unsigned char)64;    /* invalid code marker */
+        here.bits = (unsigned char)1;
+        here.val = (unsigned short)0;
+        *(*table)++ = here;             /* make a table to force an error */
+        *(*table)++ = here;
+        *bits = 1;
+        return 0;     /* no symbols, but wait for decoding to report error */
+    }
+    for (min = 1; min < max; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
 
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  uInt i;                       /* counter, current code */
-  uInt j;                       /* counter */
-  int k;                        /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  uInt mask;                    /* (1 << w) - 1, to avoid cc -O bug on HP */
-  uIntf *p;                     /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  int w;                        /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
 
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
 
-  /* Make compiler happy */
-  r.base = 0;
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
 
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_OK;
-  }
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
 
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
 
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
 
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftrees.h
+       for more information.
 
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
 
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        match = 20;
+        break;
+    case LENS:
+        base = lbase;
+        extra = lext;
+        match = 257;
+        break;
+    default:    /* DISTS */
+        base = dbase;
+        extra = dext;
+        match = 0;
+    }
 
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
 
+    /* check available table space */
+    if ((type == LENS && used > ENOUGH_LENS) ||
+        (type == DISTS && used > ENOUGH_DISTS))
+        return 1;
 
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-  n = x[g];                     /* set n to length of v */
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = g - w;
-        z = z > (uInt)l ? (uInt)l : z;        /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        here.bits = (unsigned char)(len - drop);
+        if (work[sym] + 1U < match) {
+            here.op = (unsigned char)0;
+            here.val = work[sym];
         }
-        z = 1 << j;             /* table entries for j-bit table */
+        else if (work[sym] >= match) {
+            here.op = (unsigned char)(extra[work[sym] - match]);
+            here.val = base[work[sym] - match];
+        }
+        else {
+            here.op = (unsigned char)(32 + 64);         /* end of block */
+            here.val = 0;
+        }
 
-        /* allocate new table */
-        if (*hn + z > MANY)     /* (note: doesn't matter for fixed) */
-          return Z_DATA_ERROR;  /* overflow of MANY */
-        u[h] = q = hp + *hn;
-        *hn += z;
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        min = fill;                 /* save offset to next table */
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = here;
+        } while (fill != 0);
 
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          j = i >> (w - l);
-          r.base = (uInt)(q - u[h-1] - j);   /* offset to this table */
-          u[h-1][j] = r;        /* connect to last table */
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
         }
         else
-          *t = q;               /* first table is returned result */
-      }
+            huff = 0;
 
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
 
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
 
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
+            /* increment past last table */
+            next += min;            /* here min is 1 << curr */
 
-      /* backup over finished tables */
-      mask = (1 << w) - 1;      /* needed on HP, cc -O bug */
-      while ((i & mask) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-        mask = (1 << w) - 1;
-      }
-    }
-  }
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
 
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used > ENOUGH_LENS) ||
+                (type == DISTS && used > ENOUGH_DISTS))
+                return 1;
 
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-local int inflate_trees_bits( /* c, bb, tb, hp, z) */
-uIntf *c,               /* 19 code lengths */
-uIntf *bb,              /* bits tree desired/actual depth */
-inflate_huft * FAR *tb, /* bits tree result */
-inflate_huft *hp,       /* space for trees */
-z_streamp z             /* for messages */
-)
-{
-  int r;
-  uInt hn = 0;          /* hufts used in space */
-  uIntf *v;             /* work area for huft_build */
-
-  if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
-    return Z_MEM_ERROR;
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
-                 tb, bb, hp, &hn, v);
-  if (r == Z_DATA_ERROR)
-    z->msg = (char*)"oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR || *bb == 0)
-  {
-    z->msg = (char*)"incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  ZFREE(z, v);
-  return r;
-}
-
-
-local int inflate_trees_dynamic( /* nl, nd, c, bl, bd, tl, td, hp, z) */
-uInt nl,                /* number of literal/length codes */
-uInt nd,                /* number of distance codes */
-uIntf *c,               /* that many (total) code lengths */
-uIntf *bl,              /* literal desired/actual bit depth */
-uIntf *bd,              /* distance desired/actual bit depth */
-inflate_huft * FAR *tl, /* literal/length tree result */
-inflate_huft * FAR *td, /* distance tree result */
-inflate_huft *hp,       /* space for trees */
-z_streamp z             /* for messages */
-)
-{
-  int r;
-  uInt hn = 0;          /* hufts used in space */
-  uIntf *v;             /* work area for huft_build */
-
-  /* allocate work area */
-  if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-    return Z_MEM_ERROR;
-
-  /* build literal/length tree */
-  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
-  if (r != Z_OK || *bl == 0)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r != Z_MEM_ERROR)
-    {
-      z->msg = (char*)"incomplete literal/length tree";
-      r = Z_DATA_ERROR;
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
     }
-    ZFREE(z, v);
-    return r;
-  }
 
-  /* build distance tree */
-  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
-  if (r != Z_OK || (*bd == 0 && nl > 257))
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed distance tree";
-    else if (r == Z_BUF_ERROR) {
-#if 0
-    {
-#endif
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
+    /* fill in remaining table entry if code is incomplete (guaranteed to have
+       at most one remaining entry, since if the code is incomplete, the
+       maximum code length that was allowed to get this far is one bit) */
+    if (huff != 0) {
+        here.op = (unsigned char)64;            /* invalid code marker */
+        here.bits = (unsigned char)(len - drop);
+        here.val = (unsigned short)0;
+        next[huff] = here;
     }
-#else
-      z->msg = (char*)"incomplete distance tree";
-      r = Z_DATA_ERROR;
-    }
-    else if (r != Z_MEM_ERROR)
-    {
-      z->msg = (char*)"empty distance tree with lengths";
-      r = Z_DATA_ERROR;
-    }
-    ZFREE(z, v);
-    return r;
-#endif
-  }
 
-  /* done */
-  ZFREE(z, v);
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-#ifdef BUILDFIXED
-local int fixed_built = 0;
-#define FIXEDH 544      /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-#else
-#include "inffixed.h"
-#endif
-
-
-local int inflate_trees_fixed( /* bl, bd, tl, td, z) */
-uIntf *bl,                      /* literal desired/actual bit depth */
-uIntf *bd,                      /* distance desired/actual bit depth */
-const inflate_huft * FAR *tl,   /* literal/length tree result */
-const inflate_huft * FAR *td,   /* distance tree result */
-z_streamp z                     /* for memory allocation */
-)
-{
-#ifdef BUILDFIXED
-  /* build fixed tables if not already */
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    uInt f = 0;         /* number of hufts used in fixed_mem */
-    uIntf *c;           /* length list for huft_build */
-    uIntf *v;           /* work area for huft_build */
-
-    /* allocate memory */
-    if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-      return Z_MEM_ERROR;
-    if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-    {
-      ZFREE(z, c);
-      return Z_MEM_ERROR;
-    }
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 9;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
-               fixed_mem, &f, v);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
-               fixed_mem, &f, v);
-
-    /* done */
-    ZFREE(z, v);
-    ZFREE(z, c);
-    fixed_built = 1;
-  }
-#else
-  FT_UNUSED(z);
-#endif
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
 }
--- a/src/gzip/inftrees.h
+++ b/src/gzip/inftrees.h
@@ -1,63 +1,67 @@
 /* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2002 Mark Adler
+ * Copyright (C) 1995-2005, 2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
+#ifndef INFTREES_H
+#define INFTREES_H
+
 /* WARNING: this file should *not* be used by applications. It is
    part of the implementation of the compression library and is
    subject to change. Applications should only use zlib.h.
  */
 
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
 
-#ifndef _INFTREES_H
-#define _INFTREES_H
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    0001eeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
 
-typedef struct inflate_huft_s FAR inflate_huft;
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1444, which is the sum of 852 for literal/length codes and 592 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in inflate.c and infback.c.  If the root table size is
+   changed, then these maximum sizes would be need to be recalculated and
+   updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
 
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    uInt pad;           /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit int's) */
-  uInt base;            /* literal, length base, distance base,
-                           or table offset */
-};
+/* Type of code to build for inflate_table() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
 
-/* Maximum size of dynamic tree.  The maximum found in a long but non-
-   exhaustive search was 1004 huft structures (850 for length/literals
-   and 154 for distances, the latter actually the result of an
-   exhaustive search).  The actual maximum is not known, but the
-   value below is more than safe. */
-#define MANY 1440
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));
 
-local  int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    inflate_huft *,             /* space for trees */
-    z_streamp));                /* for messages */
-
-local  int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    inflate_huft *,             /* space for trees */
-    z_streamp));                /* for messages */
-
-local  int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    const inflate_huft * FAR *, /* literal/length tree result */
-    const inflate_huft * FAR *, /* distance tree result */
-    z_streamp));                /* for memory allocation */
-
-#endif /* _INFTREES_H */
+#endif  /* INFTREES_H_ */
--- a/src/gzip/infutil.c
+++ /dev/null
@@ -1,86 +1,0 @@
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-#include "zutil.h"
-#include "infblock.h"
-#include "inftrees.h"
-#include "infcodes.h"
-#include "infutil.h"
-
-
-/* And'ing with mask[n] masks the lower n bits */
-local const uInt inflate_mask[17] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush( /* s, z, r) */
-inflate_blocks_statef *s,
-z_streamp z,
-int r )
-{
-  uInt n;
-  Bytef *p;
-  Bytef *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  zmemcpy(p, q, n);
-  p += n;
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    zmemcpy(p, q, n);
-    p += n;
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
--- a/src/gzip/infutil.h
+++ /dev/null
@@ -1,98 +1,0 @@
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONE,     /* finished last block, done */
-      BAD}      /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  inflate_block_mode  mode;     /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_codes_statef
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  inflate_huft *hufts;  /* single malloc for tree space */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-#ifndef NO_INFLATE_MASK
-local const uInt inflate_mask[17];
-#endif
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-#endif
--- /dev/null
+++ b/src/gzip/patches/0001-zlib-Fix-zlib-sources-to-compile-for-FreeType.patch
@@ -1,0 +1,419 @@
+From 2977ff0df909f939517e9857943938ff84201a26 Mon Sep 17 00:00:00 2001
+From: David Turner <david@freetype.org>
+Date: Wed, 18 Aug 2021 00:17:35 +0200
+Subject: [zlib] Fix zlib sources to compile for FreeType
+
+Fix misc zlib sources to ensure that they do not issue compiler
+warnings when they are compiled as part of src/gzip/ftgzip.c.
+
+* src/gzip/adler32.c: Do not define unused functions when Z_FREETYPE
+  is set.
+
+* src/gzip/crc32.c: Undefined DO1 and DO8 macros that are already
+  defined in adler32.c.
+
+* src/gzip/gzguts.h: Rename COPY macro to COPY__ since COPY and
+  COPY_ conflict with enum values with the same name in
+  zlib.h.
+
+* src/gzip/inflate.c, src/gzip/adler32.c: Omit unused function
+  declarations when Z_FREETYPE is defined.
+
+* src/gzip/zlib.h: Include "ftzconf.h" instead of "zconf.h" to
+  avoid conflicts with system-installed headers. Omit unused
+  function declarations when Z_FREETYPE is defined.
+
+* src/gzip/zutil.h: Use ft_memxxx() functions instead of memxxx().
+  Omit unused function declarations when Z_FREETYPE is defined.
+
+* src/gzip/inflate.h, src/gzip/inftrees.h: Add header guard macros
+  to prevent compiler errors.
+---
+ src/gzip/adler32.c  |  6 ++++++
+ src/gzip/crc32.c    |  2 ++
+ src/gzip/gzguts.h   |  2 +-
+ src/gzip/inflate.c  | 18 ++++++++++++++++++
+ src/gzip/inflate.h  |  5 +++++
+ src/gzip/inftrees.h |  5 +++++
+ src/gzip/zlib.h     | 39 ++++++++++++++++++++++++++++++++++++---
+ src/gzip/zutil.h    | 10 +++++++---
+ 8 files changed, 80 insertions(+), 7 deletions(-)
+
+diff --git a/src/gzip/adler32.c b/src/gzip/adler32.c
+index d0be4380a..a8242ba13 100644
+--- a/src/gzip/adler32.c
++++ b/src/gzip/adler32.c
+@@ -7,7 +7,9 @@
+ 
+ #include "zutil.h"
+ 
++#ifndef Z_FREETYPE
+ local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
++#endif
+ 
+ #define BASE 65521U     /* largest prime smaller than 65536 */
+ #define NMAX 5552
+@@ -139,6 +141,8 @@ uLong ZEXPORT adler32(adler, buf, len)
+     return adler32_z(adler, buf, len);
+ }
+ 
++#ifndef Z_FREETYPE
++
+ /* ========================================================================= */
+ local uLong adler32_combine_(adler1, adler2, len2)
+     uLong adler1;
+@@ -184,3 +188,5 @@ uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+ {
+     return adler32_combine_(adler1, adler2, len2);
+ }
++
++#endif  /* !Z_FREETYPE */
+diff --git a/src/gzip/crc32.c b/src/gzip/crc32.c
+index 9580440c0..d67663a4e 100644
+--- a/src/gzip/crc32.c
++++ b/src/gzip/crc32.c
+@@ -195,6 +195,8 @@ const z_crc_t FAR * ZEXPORT get_crc_table()
+ }
+ 
+ /* ========================================================================= */
++#undef DO1
++#undef DO8
+ #define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8)
+ #define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1
+ 
+diff --git a/src/gzip/gzguts.h b/src/gzip/gzguts.h
+index 990a4d251..a27f38998 100644
+--- a/src/gzip/gzguts.h
++++ b/src/gzip/gzguts.h
+@@ -163,7 +163,7 @@
+ 
+ /* values for gz_state how */
+ #define LOOK 0      /* look for a gzip header */
+-#define COPY 1      /* copy input directly */
++#define COPY__ 1      /* copy input directly */
+ #define GZIP 2      /* decompress a gzip stream */
+ 
+ /* internal gzip file state data structure */
+diff --git a/src/gzip/inflate.c b/src/gzip/inflate.c
+index ac333e8c2..fa61003ce 100644
+--- a/src/gzip/inflate.c
++++ b/src/gzip/inflate.c
+@@ -99,8 +99,10 @@ local int updatewindow OF((z_streamp strm, const unsigned char FAR *end,
+ #ifdef BUILDFIXED
+    void makefixed OF((void));
+ #endif
++#ifndef Z_FREETYPE
+ local unsigned syncsearch OF((unsigned FAR *have, const unsigned char FAR *buf,
+                               unsigned len));
++#endif
+ 
+ local int inflateStateCheck(strm)
+ z_streamp strm;
+@@ -244,6 +246,8 @@ int stream_size;
+     return inflateInit2_(strm, DEF_WBITS, version, stream_size);
+ }
+ 
++#ifndef Z_FREETYPE
++
+ int ZEXPORT inflatePrime(strm, bits, value)
+ z_streamp strm;
+ int bits;
+@@ -265,6 +269,8 @@ int value;
+     return Z_OK;
+ }
+ 
++#endif  /* Z_FREETYPE */
++
+ /*
+    Return state with length and distance decoding tables and index sizes set to
+    fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+@@ -1288,6 +1294,8 @@ z_streamp strm;
+     return Z_OK;
+ }
+ 
++#ifndef Z_FREETYPE
++
+ int ZEXPORT inflateGetDictionary(strm, dictionary, dictLength)
+ z_streamp strm;
+ Bytef *dictionary;
+@@ -1440,6 +1448,8 @@ z_streamp strm;
+     return Z_OK;
+ }
+ 
++#endif  /* !Z_FREETYPE */
++
+ /*
+    Returns true if inflate is currently at the end of a block generated by
+    Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+@@ -1458,6 +1468,8 @@ z_streamp strm;
+     return state->mode == STORED && state->bits == 0;
+ }
+ 
++#if !Z_FREETYPE
++
+ int ZEXPORT inflateCopy(dest, source)
+ z_streamp dest;
+ z_streamp source;
+@@ -1505,6 +1517,8 @@ z_streamp source;
+     return Z_OK;
+ }
+ 
++#endif  /* !Z_FREETYPE */
++
+ int ZEXPORT inflateUndermine(strm, subvert)
+ z_streamp strm;
+ int subvert;
+@@ -1538,6 +1552,8 @@ int check;
+     return Z_OK;
+ }
+ 
++#ifndef Z_FREETYPE
++
+ long ZEXPORT inflateMark(strm)
+ z_streamp strm;
+ {
+@@ -1559,3 +1575,5 @@ z_streamp strm;
+     state = (struct inflate_state FAR *)strm->state;
+     return (unsigned long)(state->next - state->codes);
+ }
++
++#endif  /* !Z_FREETYPE */
+diff --git a/src/gzip/inflate.h b/src/gzip/inflate.h
+index a46cce6b6..92ea758e2 100644
+--- a/src/gzip/inflate.h
++++ b/src/gzip/inflate.h
+@@ -3,6 +3,9 @@
+  * For conditions of distribution and use, see copyright notice in zlib.h
+  */
+ 
++#ifndef INFLATE_H
++#define INFLATE_H
++
+ /* WARNING: this file should *not* be used by applications. It is
+    part of the implementation of the compression library and is
+    subject to change. Applications should only use zlib.h.
+@@ -123,3 +126,5 @@ struct inflate_state {
+     int back;                   /* bits back of last unprocessed length/lit */
+     unsigned was;               /* initial length of match */
+ };
++
++#endif  /* INFLATE_H */
+diff --git a/src/gzip/inftrees.h b/src/gzip/inftrees.h
+index baa53a0b1..c94eb78b5 100644
+--- a/src/gzip/inftrees.h
++++ b/src/gzip/inftrees.h
+@@ -3,6 +3,9 @@
+  * For conditions of distribution and use, see copyright notice in zlib.h
+  */
+ 
++#ifndef INFTREES_H
++#define INFTREES_H
++
+ /* WARNING: this file should *not* be used by applications. It is
+    part of the implementation of the compression library and is
+    subject to change. Applications should only use zlib.h.
+@@ -60,3 +63,5 @@ typedef enum {
+ int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+                              unsigned codes, code FAR * FAR *table,
+                              unsigned FAR *bits, unsigned short FAR *work));
++
++#endif  /* INFTREES_H_ */
+diff --git a/src/gzip/zlib.h b/src/gzip/zlib.h
+index f09cdaf1e..ff5ae736d 100644
+--- a/src/gzip/zlib.h
++++ b/src/gzip/zlib.h
+@@ -31,7 +31,7 @@
+ #ifndef ZLIB_H
+ #define ZLIB_H
+ 
+-#include "zconf.h"
++#include "ftzconf.h"
+ 
+ #ifdef __cplusplus
+ extern "C" {
+@@ -211,6 +211,8 @@ typedef gz_header FAR *gz_headerp;
+ 
+ #define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+ 
++#ifndef Z_FREETYPE
++
+ #define zlib_version zlibVersion()
+ /* for compatibility with versions < 1.0.2 */
+ 
+@@ -246,7 +248,6 @@ ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+    this will be done by deflate().
+ */
+ 
+-
+ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+ /*
+     deflate compresses as much data as possible, and stops when the input
+@@ -373,6 +374,7 @@ ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+    deallocated).
+ */
+ 
++#endif  /* !Z_FREETYPE */
+ 
+ /*
+ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+@@ -534,6 +536,8 @@ ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+     The following functions are needed only in some special applications.
+ */
+ 
++#ifndef Z_FREETYPE
++
+ /*
+ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                      int  level,
+@@ -954,6 +958,8 @@ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+    destination.
+ */
+ 
++#endif  /* !Z_FREETYPE */
++
+ ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+ /*
+      This function is equivalent to inflateEnd followed by inflateInit,
+@@ -978,6 +984,8 @@ ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+    the windowBits parameter is invalid.
+ */
+ 
++#ifndef Z_FREETYPE
++
+ ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                      int bits,
+                                      int value));
+@@ -1067,6 +1075,8 @@ ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+    stream state was inconsistent.
+ */
+ 
++#endif  /* !Z_FREETYPE */
++
+ /*
+ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window));
+@@ -1093,6 +1103,8 @@ typedef unsigned (*in_func) OF((void FAR *,
+                                 z_const unsigned char FAR * FAR *));
+ typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+ 
++#ifndef Z_FREETYPE
++
+ ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                     in_func in, void FAR *in_desc,
+                                     out_func out, void FAR *out_desc));
+@@ -1212,6 +1224,8 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+      27-31: 0 (reserved)
+  */
+ 
++#endif  /* !Z_FREETYPE */
++
+ #ifndef Z_SOLO
+ 
+                         /* utility functions */
+@@ -1739,6 +1753,8 @@ ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+      if (crc != original_crc) error();
+ */
+ 
++#ifndef Z_FREETYPE
++
+ ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+                                   z_size_t len));
+ /*
+@@ -1755,7 +1771,6 @@ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+    len2.
+ */
+ 
+-
+                         /* various hacks, don't look :) */
+ 
+ /* deflateInit and inflateInit are macros to allow checking the zlib version
+@@ -1763,6 +1778,7 @@ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+  */
+ ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                      const char *version, int stream_size));
++
+ ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                      const char *version, int stream_size));
+ ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+@@ -1805,6 +1821,19 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                            ZLIB_VERSION, (int)sizeof(z_stream))
+ #endif
+ 
++#else  /* Z_FREETYPE */
++
++
++ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
++                                      const char *version, int stream_size));
++
++#  define inflateInit2(strm, windowBits) \
++          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
++                        (int)sizeof(z_stream))
++
++#endif  /* Z_FREETYPE */
++
++
+ #ifndef Z_SOLO
+ 
+ /* gzgetc() macro and its supporting function and exposed data structure.  Note
+@@ -1879,12 +1908,15 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+ 
+ #else /* Z_SOLO */
+ 
++#ifndef Z_FREETYPE
+    ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+    ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
++#endif
+ 
+ #endif /* !Z_SOLO */
+ 
+ /* undocumented functions */
++#ifndef Z_FREETYPE
+ ZEXTERN const char   * ZEXPORT zError           OF((int));
+ ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
+@@ -1904,6 +1936,7 @@ ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+                                                   va_list va));
+ #  endif
+ #endif
++#endif  /* !Z_FREETYPE */
+ 
+ #ifdef __cplusplus
+ }
+diff --git a/src/gzip/zutil.h b/src/gzip/zutil.h
+index b079ea6a8..a38573878 100644
+--- a/src/gzip/zutil.h
++++ b/src/gzip/zutil.h
+@@ -185,6 +185,8 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+   #pragma warn -8066
+ #endif
+ 
++#ifndef Z_FREETYPE
++
+ /* provide prototypes for these when building zlib without LFS */
+ #if !defined(_WIN32) && \
+     (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+@@ -192,6 +194,8 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+ #endif
+ 
++#endif  /* !Z_FREETYPE */
++
+         /* common defaults */
+ 
+ #ifndef OS_CODE
+@@ -223,9 +227,9 @@ extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+ #    define zmemcmp _fmemcmp
+ #    define zmemzero(dest, len) _fmemset(dest, 0, len)
+ #  else
+-#    define zmemcpy memcpy
+-#    define zmemcmp memcmp
+-#    define zmemzero(dest, len) memset(dest, 0, len)
++#    define zmemcpy ft_memcpy
++#    define zmemcmp ft_memcmp
++#    define zmemzero(dest, len) ft_memset(dest, 0, len)
+ #  endif
+ #else
+    void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+-- 
+2.30.2
+
--- a/src/gzip/rules.mk
+++ b/src/gzip/rules.mk
@@ -40,17 +40,17 @@
 # unconditionally.
 #
 GZIP_DRV_SRCS := $(GZIP_DIR)/adler32.c  \
+                 $(GZIP_DIR)/crc32.c    \
+                 $(GZIP_DIR)/crc32.h    \
                  $(GZIP_DIR)/ftzconf.h  \
-                 $(GZIP_DIR)/infblock.c \
-                 $(GZIP_DIR)/infblock.h \
-                 $(GZIP_DIR)/infcodes.c \
-                 $(GZIP_DIR)/infcodes.h \
+                 $(GZIP_DIR)/infback.c  \
+                 $(GZIP_DIR)/inffast.c  \
+                 $(GZIP_DIR)/inffast.h  \
                  $(GZIP_DIR)/inffixed.h \
                  $(GZIP_DIR)/inflate.c  \
+                 $(GZIP_DIR)/inflate.h  \
                  $(GZIP_DIR)/inftrees.c \
                  $(GZIP_DIR)/inftrees.h \
-                 $(GZIP_DIR)/infutil.c  \
-                 $(GZIP_DIR)/infutil.h  \
                  $(GZIP_DIR)/zlib.h     \
                  $(GZIP_DIR)/zutil.c    \
                  $(GZIP_DIR)/zutil.h
--- a/src/gzip/zlib.h
+++ b/src/gzip/zlib.h
@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.1.4, March 11th, 2002
+  version 1.2.11, January 15th, 2017
 
-  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -24,12 +24,12 @@
 
 
   The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
 */
 
-#ifndef _ZLIB_H
-#define _ZLIB_H
+#ifndef ZLIB_H
+#define ZLIB_H
 
 #include "ftzconf.h"
 
@@ -37,27 +37,45 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.1.4"
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 11
+#define ZLIB_VER_SUBREVISION 0
 
 /*
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms will be added later and will have the same
-  stream interface.
+    The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed data.
+  This version of the library supports only one compression method (deflation)
+  but other algorithms will be added later and will have the same stream
+  interface.
 
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
+    Compression can be done in a single step if the buffers are large enough,
+  or can be done by repeated calls of the compression function.  In the latter
+  case, the application must provide more input and/or consume the output
   (providing more output space) before each call.
 
-     The library also supports reading and writing files in gzip (.gz) format
-  with an interface similar to that of stdio.
+    The compressed data format used by default by the in-memory functions is
+  the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+  around a deflate stream, which is itself documented in RFC 1951.
 
-     The library does not install any signal handler. The decoder checks
-  the consistency of the compressed data, so the library should never
-  crash even in case of corrupted input.
+    The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio using the functions that start
+  with "gz".  The gzip format is different from the zlib format.  gzip is a
+  gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
+
+    This library can optionally read and write gzip and raw deflate streams in
+  memory as well.
+
+    The zlib format was designed to be compact and fast for use in memory
+  and on communications channels.  The gzip format was designed for single-
+  file compression on file systems, has a larger header than zlib to maintain
+  directory information, and uses a different, slower check method than zlib.
+
+    The library does not install any signal handler.  The decoder checks
+  the consistency of the compressed data, so the library should never crash
+  even in the case of corrupted input.
 */
 
 typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -66,15 +84,15 @@
 struct internal_state;
 
 typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
+    z_const Bytef *next_in;     /* next input byte */
     uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
+    uLong    total_in;  /* total number of input bytes read so far */
 
-    Bytef    *next_out; /* next output byte should be put there */
+    Bytef    *next_out; /* next output byte will go here */
     uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
+    uLong    total_out; /* total number of bytes output so far */
 
-    char     *msg;      /* last error message, NULL if no error */
+    z_const char *msg;  /* last error message, NULL if no error */
     struct internal_state FAR *state; /* not visible by applications */
 
     alloc_func zalloc;  /* used to allocate the internal state */
@@ -81,8 +99,9 @@
     free_func  zfree;   /* used to free the internal state */
     voidpf     opaque;  /* private data object passed to zalloc and zfree */
 
-    int     data_type;  /* best guess about the data type: ascii or binary */
-    uLong   adler;      /* adler32 value of the uncompressed data */
+    int     data_type;  /* best guess about the data type: binary or text
+                           for deflate, or the decoding state for inflate */
+    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
     uLong   reserved;   /* reserved for future use */
 } z_stream;
 
@@ -89,45 +108,71 @@
 typedef z_stream FAR *z_streamp;
 
 /*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
+     gzip header information passed to and from zlib routines.  See RFC 1952
+  for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+    int     text;       /* true if compressed data believed to be text */
+    uLong   time;       /* modification time */
+    int     xflags;     /* extra flags (not used when writing a gzip file) */
+    int     os;         /* operating system */
+    Bytef   *extra;     /* pointer to extra field or Z_NULL if none */
+    uInt    extra_len;  /* extra field length (valid if extra != Z_NULL) */
+    uInt    extra_max;  /* space at extra (only when reading header) */
+    Bytef   *name;      /* pointer to zero-terminated file name or Z_NULL */
+    uInt    name_max;   /* space at name (only when reading header) */
+    Bytef   *comment;   /* pointer to zero-terminated comment or Z_NULL */
+    uInt    comm_max;   /* space at comment (only when reading header) */
+    int     hcrc;       /* true if there was or will be a header crc */
+    int     done;       /* true when done reading gzip header (not used
+                           when writing a gzip file) */
+} gz_header;
 
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
+typedef gz_header FAR *gz_headerp;
+
+/*
+     The application must update next_in and avail_in when avail_in has dropped
+   to zero.  It must update next_out and avail_out when avail_out has dropped
+   to zero.  The application must initialize zalloc, zfree and opaque before
+   calling the init function.  All other fields are set by the compression
+   library and must not be updated by the application.
+
+     The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree.  This can be useful for custom
+   memory management.  The compression library attaches no meaning to the
    opaque value.
 
-   zalloc must return Z_NULL if there is not enough memory for the object.
+     zalloc must return Z_NULL if there is not enough memory for the object.
    If zlib is used in a multi-threaded application, zalloc and zfree must be
-   thread safe.
+   thread safe.  In that case, zlib is thread-safe.  When zalloc and zfree are
+   Z_NULL on entry to the initialization function, they are set to internal
+   routines that use the standard library functions malloc() and free().
 
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+     On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this if
+   the symbol MAXSEG_64K is defined (see zconf.h).  WARNING: On MSDOS, pointers
+   returned by zalloc for objects of exactly 65536 bytes *must* have their
+   offset normalized to zero.  The default allocation function provided by this
+   library ensures this (see zutil.c).  To reduce memory requirements and avoid
+   any allocation of 64K objects, at the expense of compression ratio, compile
+   the library with -DMAX_WBITS=14 (see zconf.h).
 
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
+     The fields total_in and total_out can be used for statistics or progress
+   reports.  After compression, total_in holds the total size of the
+   uncompressed data and may be saved for use by the decompressor (particularly
+   if the decompressor wants to decompress everything in a single step).
 */
 
                         /* constants */
 
 #define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_PARTIAL_FLUSH 1
 #define Z_SYNC_FLUSH    2
 #define Z_FULL_FLUSH    3
 #define Z_FINISH        4
-/* Allowed flush values; see deflate() below for details */
+#define Z_BLOCK         5
+#define Z_TREES         6
+/* Allowed flush values; see deflate() and inflate() below for details */
 
 #define Z_OK            0
 #define Z_STREAM_END    1
@@ -138,8 +183,8 @@
 #define Z_MEM_ERROR    (-4)
 #define Z_BUF_ERROR    (-5)
 #define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
  */
 
 #define Z_NO_COMPRESSION         0
@@ -150,13 +195,16 @@
 
 #define Z_FILTERED            1
 #define Z_HUFFMAN_ONLY        2
+#define Z_RLE                 3
+#define Z_FIXED               4
 #define Z_DEFAULT_STRATEGY    0
 /* compression strategy; see deflateInit2() below for details */
 
 #define Z_BINARY   0
-#define Z_ASCII    1
+#define Z_TEXT     1
+#define Z_ASCII    Z_TEXT   /* for compatibility with 1.2.2 and earlier */
 #define Z_UNKNOWN  2
-/* Possible values of the data_type field */
+/* Possible values of the data_type field for deflate() */
 
 #define Z_DEFLATED   8
 /* The deflate compression method (the only one supported in this version) */
@@ -163,229 +211,325 @@
 
 #define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
 
+#ifndef Z_FREETYPE
 
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+
                         /* basic functions */
 
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
 /* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
-   This check is automatically made by deflateInit and inflateInit.
+   If the first character differs, the library code actually used is not
+   compatible with the zlib.h header file used by the application.  This check
+   is automatically made by deflateInit and inflateInit.
  */
 
 /*
-ZEXTERN(int)  deflateInit OF((z_streamp strm, int level));
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
 
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
+     Initializes the internal stream state for compression.  The fields
+   zalloc, zfree and opaque must be initialized before by the caller.  If
+   zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+   allocation functions.
 
      The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
-   compression (currently equivalent to level 6).
+   1 gives best speed, 9 gives best compression, 0 gives no compression at all
+   (the input data is simply copied a block at a time).  Z_DEFAULT_COMPRESSION
+   requests a default compromise between speed and compression (currently
+   equivalent to level 6).
 
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if level is not a valid compression level, or
    Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
+   with the version assumed by the caller (ZLIB_VERSION).  msg is set to null
+   if there is no error message.  deflateInit does not perform any compression:
+   this will be done by deflate().
 */
 
-
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 /*
     deflate compresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may introduce some
-  output latency (reading input without producing any output) except when
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
   forced to flush.
 
-    The detailed semantics are as follows. deflate performs one or both of the
+    The detailed semantics are as follows.  deflate performs one or both of the
   following actions:
 
   - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
+    accordingly.  If not all input can be processed (because there is not
     enough room in the output buffer), next_in and avail_in are updated and
     processing will resume at this point for the next call of deflate().
 
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  This action is forced if the parameter flush is non zero.
     Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
+    should be set only when necessary.  Some output may be provided even if
+    flush is zero.
 
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
-  and with zero avail_out, it must be called again after making room in the
-  output buffer because there might be more output pending.
+    Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating avail_in or avail_out accordingly; avail_out should
+  never be zero before the call.  The application can consume the compressed
+  output when it wants, for example when the output buffer is full (avail_out
+  == 0), or after each call of deflate().  If deflate returns Z_OK and with
+  zero avail_out, it must be called again after making room in the output
+  buffer because there might be more output pending. See deflatePending(),
+  which can be used if desired to determine whether or not there is more ouput
+  in that case.
 
+    Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+  decide how much data to accumulate before producing output, in order to
+  maximize compression.
+
     If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
   flushed to the output buffer and the output is aligned on a byte boundary, so
-  that the decompressor can get all input data available so far. (In particular
-  avail_in is zero after the call if enough output space has been provided
-  before the call.)  Flushing may degrade compression for some compression
-  algorithms and so it should be used only when necessary.
+  that the decompressor can get all input data available so far.  (In
+  particular avail_in is zero after the call if enough output space has been
+  provided before the call.) Flushing may degrade compression for some
+  compression algorithms and so it should be used only when necessary.  This
+  completes the current deflate block and follows it with an empty stored block
+  that is three bits plus filler bits to the next byte, followed by four bytes
+  (00 00 ff ff).
 
+    If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+  output buffer, but the output is not aligned to a byte boundary.  All of the
+  input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+  This completes the current deflate block and follows it with an empty fixed
+  codes block that is 10 bits long.  This assures that enough bytes are output
+  in order for the decompressor to finish the block before the empty fixed
+  codes block.
+
+    If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+  for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+  seven bits of the current block are held to be written as the next byte after
+  the next deflate block is completed.  In this case, the decompressor may not
+  be provided enough bits at this point in order to complete decompression of
+  the data provided so far to the compressor.  It may need to wait for the next
+  block to be emitted.  This is for advanced applications that need to control
+  the emission of deflate blocks.
+
     If flush is set to Z_FULL_FLUSH, all output is flushed as with
   Z_SYNC_FLUSH, and the compression state is reset so that decompression can
   restart from this point if previous compressed data has been damaged or if
-  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
-  the compression.
+  random access is desired.  Using Z_FULL_FLUSH too often can seriously degrade
+  compression.
 
     If deflate returns with avail_out == 0, this function must be called again
   with the same value of the flush parameter and more output space (updated
   avail_out), until the flush is complete (deflate returns with non-zero
-  avail_out).
+  avail_out).  In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+  avail_out is greater than six to avoid repeated flush markers due to
+  avail_out == 0 on return.
 
     If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
+  pending output is flushed and deflate returns with Z_STREAM_END if there was
+  enough output space.  If deflate returns with Z_OK or Z_BUF_ERROR, this
+  function must be called again with Z_FINISH and more output space (updated
+  avail_out) but no more input data, until it returns with Z_STREAM_END or an
+  error.  After deflate has returned Z_STREAM_END, the only possible operations
+  on the stream are deflateReset or deflateEnd.
 
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
+    Z_FINISH can be used in the first deflate call after deflateInit if all the
+  compression is to be done in a single step.  In order to complete in one
+  call, avail_out must be at least the value returned by deflateBound (see
+  below).  Then deflate is guaranteed to return Z_STREAM_END.  If not enough
+  output space is provided, deflate will not return Z_STREAM_END, and it must
+  be called again as described above.
 
-    deflate() sets strm->adler to the adler32 checksum of all input read
-  so far (that is, total_in bytes).
+    deflate() sets strm->adler to the Adler-32 checksum of all input read
+  so far (that is, total_in bytes).  If a gzip stream is being generated, then
+  strm->adler will be the CRC-32 checksum of the input read so far.  (See
+  deflateInit2 below.)
 
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
+    deflate() may update strm->data_type if it can make a good guess about
+  the input data type (Z_BINARY or Z_TEXT).  If in doubt, the data is
+  considered binary.  This field is only for information purposes and does not
+  affect the compression algorithm in any manner.
 
     deflate() returns Z_OK if some progress has been made (more input
   processed or more output produced), Z_STREAM_END if all input has been
   consumed and all output has been produced (only when flush is set to
   Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
-  (for example avail_in or avail_out was zero).
+  if next_in or next_out was Z_NULL or the state was inadvertently written over
+  by the application), or Z_BUF_ERROR if no progress is possible (for example
+  avail_in or avail_out was zero).  Note that Z_BUF_ERROR is not fatal, and
+  deflate() can be called again with more input and more output space to
+  continue compressing.
 */
 
 
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
+   This function discards any unprocessed input and does not flush any pending
+   output.
 
      deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
    stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   msg may be set but then points to a static string (which must not be
+   prematurely (some input or output was discarded).  In the error case, msg
+   may be set but then points to a static string (which must not be
    deallocated).
 */
 
+#endif  /* !Z_FREETYPE */
 
 /*
-ZEXTERN(int)  inflateInit OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
-     Initializes the internal stream state for decompression. The fields
+     Initializes the internal stream state for decompression.  The fields
    next_in, avail_in, zalloc, zfree and opaque must be initialized before by
-   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
-   value depends on the compression method), inflateInit determines the
-   compression method from the zlib header and allocates all data structures
-   accordingly; otherwise the allocation will be deferred to the first call of
-   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
-   use default allocation functions.
+   the caller.  In the current version of inflate, the provided input is not
+   read or consumed.  The allocation of a sliding window will be deferred to
+   the first call of inflate (if the decompression does not complete on the
+   first call).  If zalloc and zfree are set to Z_NULL, inflateInit updates
+   them to use default allocation functions.
 
      inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   version assumed by the caller.  msg is set to null if there is no error
-   message. inflateInit does not perform any decompression apart from reading
-   the zlib header if present: this will be done by inflate().  (So next_in and
-   avail_in may be modified, but next_out and avail_out are unchanged.)
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit does not perform any decompression.
+   Actual decompression will be done by inflate().  So next_in, and avail_in,
+   next_out, and avail_out are unused and unchanged.  The current
+   implementation of inflateInit() does not process any header information --
+   that is deferred until inflate() is called.
 */
 
 
-ZEXTERN(int) inflate OF((z_streamp strm, int flush));
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 /*
     inflate decompresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may some
-  introduce some output latency (reading input without producing any output)
-  except when forced to flush.
+  buffer becomes empty or the output buffer becomes full.  It may introduce
+  some output latency (reading input without producing any output) except when
+  forced to flush.
 
-  The detailed semantics are as follows. inflate performs one or both of the
+  The detailed semantics are as follows.  inflate performs one or both of the
   following actions:
 
   - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
+    accordingly.  If not all input can be processed (because there is not
+    enough room in the output buffer), then next_in and avail_in are updated
+    accordingly, and processing will resume at this point for the next call of
+    inflate().
 
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there
-    is no more input data or no more space in the output buffer (see below
-    about the flush parameter).
+  - Generate more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there is
+    no more input data or no more space in the output buffer (see below about
+    the flush parameter).
 
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
+    Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming more
+  output, and updating the next_* and avail_* values accordingly.  If the
+  caller of inflate() does not provide both available input and available
+  output space, it is possible that there will be no progress made.  The
+  application can consume the uncompressed output when it wants, for example
+  when the output buffer is full (avail_out == 0), or after each call of
+  inflate().  If inflate returns Z_OK and with zero avail_out, it must be
+  called again after making room in the output buffer because there might be
+  more output pending.
 
-    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
-  output as possible to the output buffer. The flushing behavior of inflate is
-  not specified for values of the flush parameter other than Z_SYNC_FLUSH
-  and Z_FINISH, but the current implementation actually flushes as much output
-  as possible anyway.
+    The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+  Z_BLOCK, or Z_TREES.  Z_SYNC_FLUSH requests that inflate() flush as much
+  output as possible to the output buffer.  Z_BLOCK requests that inflate()
+  stop if and when it gets to the next deflate block boundary.  When decoding
+  the zlib or gzip format, this will cause inflate() to return immediately
+  after the header and before the first block.  When doing a raw inflate,
+  inflate() will go ahead and process the first block, and will return when it
+  gets to the end of that block, or when it runs out of data.
 
+    The Z_BLOCK option assists in appending to or combining deflate streams.
+  To assist in this, on return inflate() always sets strm->data_type to the
+  number of unused bits in the last byte taken from strm->next_in, plus 64 if
+  inflate() is currently decoding the last block in the deflate stream, plus
+  128 if inflate() returned immediately after decoding an end-of-block code or
+  decoding the complete header up to just before the first byte of the deflate
+  stream.  The end-of-block will not be indicated until all of the uncompressed
+  data from that block has been written to strm->next_out.  The number of
+  unused bits may in general be greater than seven, except when bit 7 of
+  data_type is set, in which case the number of unused bits will be less than
+  eight.  data_type is set as noted here every time inflate() returns for all
+  flush options, and so can be used to determine the amount of currently
+  consumed input in bits.
+
+    The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+  end of each deflate block header is reached, before any actual data in that
+  block is decoded.  This allows the caller to determine the length of the
+  deflate block header for later use in random access within a deflate block.
+  256 is added to the value of strm->data_type when inflate() returns
+  immediately after reaching the end of the deflate block header.
+
     inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
+  error.  However if all decompression is to be performed in a single step (a
+  single call of inflate), the parameter flush should be set to Z_FINISH.  In
+  this case all pending input is processed and all pending output is flushed;
+  avail_out must be large enough to hold all of the uncompressed data for the
+  operation to complete.  (The size of the uncompressed data may have been
+  saved by the compressor for this purpose.)  The use of Z_FINISH is not
+  required to perform an inflation in one step.  However it may be used to
+  inform inflate that a faster approach can be used for the single inflate()
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
+  stream completes, which reduces inflate's memory footprint.  If the stream
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
 
-     If a preset dictionary is needed at this point (see inflateSetDictionary
-  below), inflate sets strm-adler to the adler32 checksum of the
-  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise
-  it sets strm->adler to the adler32 checksum of all output produced
-  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
-  an error code as described below. At the end of the stream, inflate()
-  checks that its computed adler32 checksum is equal to that saved by the
-  compressor and returns Z_STREAM_END only if the checksum is correct.
+     In this implementation, inflate() always flushes as much output as
+  possible to the output buffer, and always uses the faster approach on the
+  first call.  So the effects of the flush parameter in this implementation are
+  on the return value of inflate() as noted below, when inflate() returns early
+  when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+  memory for a sliding window when Z_FINISH is used.
 
+     If a preset dictionary is needed after this call (see inflateSetDictionary
+  below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
+  chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
+  strm->adler to the Adler-32 checksum of all output produced so far (that is,
+  total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
+  below.  At the end of the stream, inflate() checks that its computed Adler-32
+  checksum is equal to that saved by the compressor and returns Z_STREAM_END
+  only if the checksum is correct.
+
+    inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+  deflate data.  The header type is detected automatically, if requested when
+  initializing with inflateInit2().  Any information contained in the gzip
+  header is not retained unless inflateGetHeader() is used.  When processing
+  gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+  produced so far.  The CRC-32 is checked against the gzip trailer, as is the
+  uncompressed length, modulo 2^32.
+
     inflate() returns Z_OK if some progress has been made (more input processed
   or more output produced), Z_STREAM_END if the end of the compressed data has
   been reached and all uncompressed output has been produced, Z_NEED_DICT if a
   preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
-  corrupted (input stream not conforming to the zlib format or incorrect
-  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
-  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
-  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
-  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
-  case, the application may then call inflateSync to look for a good
-  compression block.
+  corrupted (input stream not conforming to the zlib format or incorrect check
+  value, in which case strm->msg points to a string with a more specific
+  error), Z_STREAM_ERROR if the stream structure was inconsistent (for example
+  next_in or next_out was Z_NULL, or the state was inadvertently written over
+  by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR
+  if no progress was possible or if there was not enough room in the output
+  buffer when Z_FINISH is used.  Note that Z_BUF_ERROR is not fatal, and
+  inflate() can be called again with more input and more output space to
+  continue decompressing.  If Z_DATA_ERROR is returned, the application may
+  then call inflateSync() to look for a good compression block if a partial
+  recovery of the data is to be attempted.
 */
 
 
-ZEXTERN(int)  inflateEnd OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
+   This function discards any unprocessed input and does not flush any pending
+   output.
 
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
+     inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state
+   was inconsistent.
 */
 
+
                         /* Advanced functions */
 
 /*
@@ -392,8 +536,10 @@
     The following functions are needed only in some special applications.
 */
 
+#ifndef Z_FREETYPE
+
 /*
-ZEXTERN(int)  deflateInit2 OF((z_streamp strm,
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
                                      int  level,
                                      int  method,
                                      int  windowBits,
@@ -400,52 +546,90 @@
                                      int  memLevel,
                                      int  strategy));
 
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc, zfree and opaque must be initialized before by
-   the caller.
+     This is another version of deflateInit with more compression options.  The
+   fields next_in, zalloc, zfree and opaque must be initialized before by the
+   caller.
 
-     The method parameter is the compression method. It must be Z_DEFLATED in
+     The method parameter is the compression method.  It must be Z_DEFLATED in
    this version of the library.
 
      The windowBits parameter is the base two logarithm of the window size
    (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library. Larger values of this parameter result in better
-   compression at the expense of memory usage. The default value is 15 if
+   version of the library.  Larger values of this parameter result in better
+   compression at the expense of memory usage.  The default value is 15 if
    deflateInit is used instead.
 
+     For the current implementation of deflate(), a windowBits value of 8 (a
+   window size of 256 bytes) is not supported.  As a result, a request for 8
+   will result in 9 (a 512-byte window).  In that case, providing 8 to
+   inflateInit2() will result in an error when the zlib header with 9 is
+   checked against the initialization of inflate().  The remedy is to not use 8
+   with deflateInit2() with this initialization, or at least in that case use 9
+   with inflateInit2().
+
+     windowBits can also be -8..-15 for raw deflate.  In this case, -windowBits
+   determines the window size.  deflate() will then generate raw deflate data
+   with no zlib header or trailer, and will not compute a check value.
+
+     windowBits can also be greater than 15 for optional gzip encoding.  Add
+   16 to windowBits to write a simple gzip header and trailer around the
+   compressed data instead of a zlib wrapper.  The gzip header will have no
+   file name, no extra data, no comment, no modification time (set to zero), no
+   header crc, and the operating system will be set to the appropriate value,
+   if the operating system was determined at compile time.  If a gzip stream is
+   being written, strm->adler is a CRC-32 instead of an Adler-32.
+
+     For raw deflate or gzip encoding, a request for a 256-byte window is
+   rejected as invalid, since only the zlib header provides a means of
+   transmitting the window size to the decompressor.
+
      The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
+   for the internal compression state.  memLevel=1 uses minimum memory but is
+   slow and reduces compression ratio; memLevel=9 uses maximum memory for
+   optimal speed.  The default value is 8.  See zconf.h for total memory usage
+   as a function of windowBits and memLevel.
 
-     The strategy parameter is used to tune the compression algorithm. Use the
+     The strategy parameter is used to tune the compression algorithm.  Use the
    value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to compress them better. The effect of Z_FILTERED is to force more
-   Huffman coding and less string matching; it is somewhat intermediate
-   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.
+   filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match), or Z_RLE to limit match distances to one (run-length
+   encoding).  Filtered data consists mostly of small values with a somewhat
+   random distribution.  In this case, the compression algorithm is tuned to
+   compress them better.  The effect of Z_FILTERED is to force more Huffman
+   coding and less string matching; it is somewhat intermediate between
+   Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY.  Z_RLE is designed to be almost as
+   fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data.  The
+   strategy parameter only affects the compression ratio but not the
+   correctness of the compressed output even if it is not set appropriately.
+   Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+   decoder for special applications.
 
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
-   method). msg is set to null if there is no error message.  deflateInit2 does
-   not perform any compression: this will be done by deflate().
+     deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+   method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+   incompatible with the version assumed by the caller (ZLIB_VERSION).  msg is
+   set to null if there is no error message.  deflateInit2 does not perform any
+   compression: this will be done by deflate().
 */
 
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
 /*
      Initializes the compression dictionary from the given byte sequence
-   without producing any compressed output. This function must be called
-   immediately after deflateInit, deflateInit2 or deflateReset, before any
-   call of deflate. The compressor and decompressor must use exactly the same
-   dictionary (see inflateSetDictionary).
+   without producing any compressed output.  When using the zlib format, this
+   function must be called immediately after deflateInit, deflateInit2 or
+   deflateReset, and before any call of deflate.  When doing raw deflate, this
+   function must be called either before any call of deflate, or immediately
+   after the completion of a deflate block, i.e. after all input has been
+   consumed and all output has been delivered when using any of the flush
+   options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH.  The
+   compressor and decompressor must use exactly the same dictionary (see
+   inflateSetDictionary).
 
      The dictionary should consist of strings (byte sequences) that are likely
    to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
+   used strings preferably put towards the end of the dictionary.  Using a
    dictionary is most useful when the data to be compressed is short and can be
    predicted with good accuracy; the data can then be compressed better than
    with the default empty dictionary.
@@ -452,160 +636,633 @@
 
      Depending on the size of the compression data structures selected by
    deflateInit or deflateInit2, a part of the dictionary may in effect be
-   discarded, for example if the dictionary is larger than the window size in
-   deflate or deflate2. Thus the strings most likely to be useful should be
-   put at the end of the dictionary, not at the front.
+   discarded, for example if the dictionary is larger than the window size
+   provided in deflateInit or deflateInit2.  Thus the strings most likely to be
+   useful should be put at the end of the dictionary, not at the front.  In
+   addition, the current implementation of deflate will use at most the window
+   size minus 262 bytes of the provided dictionary.
 
-     Upon return of this function, strm->adler is set to the Adler32 value
+     Upon return of this function, strm->adler is set to the Adler-32 value
    of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
+   which dictionary has been used by the compressor.  (The Adler-32 value
    applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)
+   actually used by the compressor.) If a raw deflate was requested, then the
+   Adler-32 value is not computed and strm->adler is not set.
 
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
    inconsistent (for example if deflate has already been called for this stream
-   or if the compression method is bsort). deflateSetDictionary does not
-   perform any compression: this will be done by deflate().
+   or if not at a block boundary for raw deflate).  deflateSetDictionary does
+   not perform any compression: this will be done by deflate().
 */
 
+ZEXTERN int ZEXPORT deflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
 /*
+     Returns the sliding dictionary being maintained by deflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If deflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
+
+     deflateGetDictionary() may return a length less than the window size, even
+   when more than the window size in input has been provided. It may return up
+   to 258 bytes less in that case, due to how zlib's implementation of deflate
+   manages the sliding window and lookahead for matches, where matches can be
+   up to 258 bytes long. If the application needs the last window-size bytes of
+   input, then that would need to be saved by the application outside of zlib.
+
+     deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
      Sets the destination stream as a complete copy of the source stream.
 
      This function can be useful when several compression strategies will be
    tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
+   data with a filter.  The streams that will be discarded should then be freed
    by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
+   compression state which can be quite large, so this strategy is slow and can
+   consume lots of memory.
 
      deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
    destination.
 */
 
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
 /*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
+     This function is equivalent to deflateEnd followed by deflateInit, but
+   does not free and reallocate the internal compression state.  The stream
+   will leave the compression level and any other attributes that may have been
+   set unchanged.
 
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
+     deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
 */
 
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+                                      int level,
+                                      int strategy));
 /*
      Dynamically update the compression level and compression strategy.  The
-   interpretation of level and strategy is as in deflateInit2.  This can be
+   interpretation of level and strategy is as in deflateInit2().  This can be
    used to switch between compression and straight copy of the input data, or
-   to switch to a different kind of input data requiring a different
-   strategy. If the compression level is changed, the input available so far
-   is compressed with the old level (and may be flushed); the new level will
-   take effect only at the next call of deflate().
+   to switch to a different kind of input data requiring a different strategy.
+   If the compression approach (which is a function of the level) or the
+   strategy is changed, and if any input has been consumed in a previous
+   deflate() call, then the input available so far is compressed with the old
+   level and strategy using deflate(strm, Z_BLOCK).  There are three approaches
+   for the compression levels 0, 1..3, and 4..9 respectively.  The new level
+   and strategy will take effect at the next call of deflate().
 
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to
-   be compressed and flushed. In particular, strm->avail_out must be non-zero.
+     If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
+   not have enough output space to complete, then the parameter change will not
+   take effect.  In this case, deflateParams() can be called again with the
+   same parameters and more output space to try again.
 
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
-   if strm->avail_out was zero.
+     In order to assure a change in the parameters on the first try, the
+   deflate stream should be flushed using deflate() with Z_BLOCK or other flush
+   request until strm.avail_out is not zero, before calling deflateParams().
+   Then no more input data should be provided before the deflateParams() call.
+   If this is done, the old level and strategy will be applied to the data
+   compressed before deflateParams(), and the new level and strategy will be
+   applied to the the data compressed after deflateParams().
+
+     deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream
+   state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if
+   there was not enough output space to complete the compression of the
+   available input data before a change in the strategy or approach.  Note that
+   in the case of a Z_BUF_ERROR, the parameters are not changed.  A return
+   value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be
+   retried with more output space.
 */
 
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+                                    int good_length,
+                                    int max_lazy,
+                                    int nice_length,
+                                    int max_chain));
 /*
-ZEXTERN(int)  inflateInit2 OF((z_streamp strm,
+     Fine tune deflate's internal compression parameters.  This should only be
+   used by someone who understands the algorithm used by zlib's deflate for
+   searching for the best matching string, and even then only by the most
+   fanatic optimizer trying to squeeze out the last compressed bit for their
+   specific input data.  Read the deflate.c source code for the meaning of the
+   max_lazy, good_length, nice_length, and max_chain parameters.
+
+     deflateTune() can be called after deflateInit() or deflateInit2(), and
+   returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
+ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
+                                       uLong sourceLen));
+/*
+     deflateBound() returns an upper bound on the compressed size after
+   deflation of sourceLen bytes.  It must be called after deflateInit() or
+   deflateInit2(), and after deflateSetHeader(), if used.  This would be used
+   to allocate an output buffer for deflation in a single pass, and so would be
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
+*/
+
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.  If pending
+   or bits are Z_NULL, then those values are not set.
+
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */
+
+ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     deflatePrime() inserts bits in the deflate output stream.  The intent
+   is that this function is used to start off the deflate output with the bits
+   leftover from a previous deflate stream when appending to it.  As such, this
+   function can only be used for raw deflate, and must be used before the first
+   deflate() call after a deflateInit2() or deflateReset().  bits must be less
+   than or equal to 16, and that many of the least significant bits of value
+   will be inserted in the output.
+
+     deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
+   room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     deflateSetHeader() provides gzip header information for when a gzip
+   stream is requested by deflateInit2().  deflateSetHeader() may be called
+   after deflateInit2() or deflateReset() and before the first call of
+   deflate().  The text, time, os, extra field, name, and comment information
+   in the provided gz_header structure are written to the gzip header (xflag is
+   ignored -- the extra flags are set according to the compression level).  The
+   caller must assure that, if not Z_NULL, name and comment are terminated with
+   a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+   available there.  If hcrc is true, a gzip header crc is included.  Note that
+   the current versions of the command-line version of gzip (up through version
+   1.3.x) do not support header crc's, and will report that it is a "multi-part
+   gzip file" and give up.
+
+     If deflateSetHeader is not used, the default gzip header has text false,
+   the time set to zero, and os set to 255, with no extra, name, or comment
+   fields.  The gzip header is returned to the default state by deflateReset().
+
+     deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
                                      int  windowBits));
 
-     This is another version of inflateInit with an extra parameter. The
+     This is another version of inflateInit with an extra parameter.  The
    fields next_in, avail_in, zalloc, zfree and opaque must be initialized
    before by the caller.
 
      The windowBits parameter is the base two logarithm of the maximum window
    size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library. The default value is 15 if inflateInit is used
-   instead. If a compressed stream with a larger window size is given as
-   input, inflate() will return with the error code Z_DATA_ERROR instead of
-   trying to allocate a larger window.
+   this version of the library.  The default value is 15 if inflateInit is used
+   instead.  windowBits must be greater than or equal to the windowBits value
+   provided to deflateInit2() while compressing, or it must be equal to 15 if
+   deflateInit2() was not used.  If a compressed stream with a larger window
+   size is given as input, inflate() will return with the error code
+   Z_DATA_ERROR instead of trying to allocate a larger window.
 
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
-   memLevel). msg is set to null if there is no error message.  inflateInit2
-   does not perform any decompression apart from reading the zlib header if
-   present: this will be done by inflate(). (So next_in and avail_in may be
-   modified, but next_out and avail_out are unchanged.)
+     windowBits can also be zero to request that inflate use the window size in
+   the zlib header of the compressed stream.
+
+     windowBits can also be -8..-15 for raw inflate.  In this case, -windowBits
+   determines the window size.  inflate() will then process raw deflate data,
+   not looking for a zlib or gzip header, not generating a check value, and not
+   looking for any check values for comparison at the end of the stream.  This
+   is for use with other formats that use the deflate compressed data format
+   such as zip.  Those formats provide their own check values.  If a custom
+   format is developed using the raw deflate format for compressed data, it is
+   recommended that a check value such as an Adler-32 or a CRC-32 be applied to
+   the uncompressed data as is done in the zlib, gzip, and zip formats.  For
+   most applications, the zlib format should be used as is.  Note that comments
+   above on the use in deflateInit2() applies to the magnitude of windowBits.
+
+     windowBits can also be greater than 15 for optional gzip decoding.  Add
+   32 to windowBits to enable zlib and gzip decoding with automatic header
+   detection, or add 16 to decode only the gzip format (the zlib format will
+   return a Z_DATA_ERROR).  If a gzip stream is being decoded, strm->adler is a
+   CRC-32 instead of an Adler-32.  Unlike the gunzip utility and gzread() (see
+   below), inflate() will not automatically decode concatenated gzip streams.
+   inflate() will return Z_STREAM_END at the end of the gzip stream.  The state
+   would need to be reset to continue decoding a subsequent gzip stream.
+
+     inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+   invalid, such as a null pointer to the structure.  msg is set to null if
+   there is no error message.  inflateInit2 does not perform any decompression
+   apart from possibly reading the zlib header if present: actual decompression
+   will be done by inflate().  (So next_in and avail_in may be modified, but
+   next_out and avail_out are unused and unchanged.) The current implementation
+   of inflateInit2() does not process any header information -- that is
+   deferred until inflate() is called.
 */
 
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
 /*
      Initializes the decompression dictionary from the given uncompressed byte
-   sequence. This function must be called immediately after a call of inflate
-   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
-   can be determined from the Adler32 value returned by this call of
-   inflate. The compressor and decompressor must use exactly the same
-   dictionary (see deflateSetDictionary).
+   sequence.  This function must be called immediately after a call of inflate,
+   if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
+   can be determined from the Adler-32 value returned by that call of inflate.
+   The compressor and decompressor must use exactly the same dictionary (see
+   deflateSetDictionary).  For raw inflate, this function can be called at any
+   time to set the dictionary.  If the provided dictionary is smaller than the
+   window and there is already data in the window, then the provided dictionary
+   will amend what's there.  The application must insure that the dictionary
+   that was used for compression is provided.
 
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
+   parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
    inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect Adler32 value). inflateSetDictionary does not
+   expected one (incorrect Adler-32 value).  inflateSetDictionary does not
    perform any decompression: this will be done by subsequent calls of
    inflate().
 */
 
+ZEXTERN int ZEXPORT inflateGetDictionary OF((z_streamp strm,
+                                             Bytef *dictionary,
+                                             uInt  *dictLength));
 /*
-    Skips invalid compressed data until a full flush point (see above the
-  description of deflate with Z_FULL_FLUSH) can be found, or until all
-  available input is skipped. No output is provided.
+     Returns the sliding dictionary being maintained by inflate.  dictLength is
+   set to the number of bytes in the dictionary, and that many bytes are copied
+   to dictionary.  dictionary must have enough space, where 32768 bytes is
+   always enough.  If inflateGetDictionary() is called with dictionary equal to
+   Z_NULL, then only the dictionary length is returned, and nothing is copied.
+   Similary, if dictLength is Z_NULL, then it is not set.
 
-    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
+     inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the
+   stream state is inconsistent.
 */
 
-ZEXTERN(int)  inflateReset OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
 /*
+     Skips invalid compressed data until a possible full flush point (see above
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
+   available input is skipped.  No output is provided.
+
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
+   All full flush points have this pattern, but not all occurrences of this
+   pattern are full flush points.
+
+     inflateSync returns Z_OK if a possible full flush point has been found,
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when randomly accessing a large stream.  The
+   first pass through the stream can periodically record the inflate state,
+   allowing restarting inflate at those points when randomly accessing the
+   stream.
+
+     inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being Z_NULL).  msg is left unchanged in both source and
+   destination.
+*/
+
+#endif  /* !Z_FREETYPE */
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
      This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
+   but does not free and reallocate the internal decompression state.  The
+   stream will keep attributes that may have been set by inflateInit2.
 
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
+     inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL).
 */
 
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+                                      int windowBits));
+/*
+     This function is the same as inflateReset, but it also permits changing
+   the wrap and window size requests.  The windowBits parameter is interpreted
+   the same as it is for inflateInit2.  If the window size is changed, then the
+   memory allocated for the window is freed, and the window will be reallocated
+   by inflate() if needed.
 
+     inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+   the windowBits parameter is invalid.
+*/
+
+#ifndef Z_FREETYPE
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+                                     int bits,
+                                     int value));
+/*
+     This function inserts bits in the inflate input stream.  The intent is
+   that this function is used to start inflating at a bit position in the
+   middle of a byte.  The provided bits will be used before any bytes are used
+   from next_in.  This function should only be used with raw inflate, and
+   should be used before the first inflate() call after inflateInit2() or
+   inflateReset().  bits must be less than or equal to 16, and that many of the
+   least significant bits of value will be inserted in the input.
+
+     If bits is negative, then the input stream bit buffer is emptied.  Then
+   inflatePrime() can be called again to put bits in the buffer.  This is used
+   to clear out bits leftover after feeding inflate a block description prior
+   to feeding inflate codes.
+
+     inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
+/*
+     This function returns two values, one in the lower 16 bits of the return
+   value, and the other in the remaining upper bits, obtained by shifting the
+   return value down 16 bits.  If the upper value is -1 and the lower value is
+   zero, then inflate() is currently decoding information outside of a block.
+   If the upper value is -1 and the lower value is non-zero, then inflate is in
+   the middle of a stored block, with the lower value equaling the number of
+   bytes from the input remaining to copy.  If the upper value is not -1, then
+   it is the number of bits back from the current bit position in the input of
+   the code (literal or length/distance pair) currently being processed.  In
+   that case the lower value is the number of bytes already emitted for that
+   code.
+
+     A code is being processed if inflate is waiting for more input to complete
+   decoding of the code, or if it has completed decoding but is waiting for
+   more output space to write the literal or match data.
+
+     inflateMark() is used to mark locations in the input data for random
+   access, which may be at bit positions, and to note those cases where the
+   output of a code may span boundaries of random access blocks.  The current
+   location in the input stream can be determined from avail_in and data_type
+   as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+     inflateMark returns the value noted above, or -65536 if the provided
+   source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+                                         gz_headerp head));
+/*
+     inflateGetHeader() requests that gzip header information be stored in the
+   provided gz_header structure.  inflateGetHeader() may be called after
+   inflateInit2() or inflateReset(), and before the first call of inflate().
+   As inflate() processes the gzip stream, head->done is zero until the header
+   is completed, at which time head->done is set to one.  If a zlib stream is
+   being decoded, then head->done is set to -1 to indicate that there will be
+   no gzip header information forthcoming.  Note that Z_BLOCK or Z_TREES can be
+   used to force inflate() to return immediately after header processing is
+   complete and before any actual data is decompressed.
+
+     The text, time, xflags, and os fields are filled in with the gzip header
+   contents.  hcrc is set to true if there is a header CRC.  (The header CRC
+   was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+   contains the maximum number of bytes to write to extra.  Once done is true,
+   extra_len contains the actual extra field length, and extra contains the
+   extra field, or that field truncated if extra_max is less than extra_len.
+   If name is not Z_NULL, then up to name_max characters are written there,
+   terminated with a zero unless the length is greater than name_max.  If
+   comment is not Z_NULL, then up to comm_max characters are written there,
+   terminated with a zero unless the length is greater than comm_max.  When any
+   of extra, name, or comment are not Z_NULL and the respective field is not
+   present in the header, then that field is set to Z_NULL to signal its
+   absence.  This allows the use of deflateSetHeader() with the returned
+   structure to duplicate the header.  However if those fields are set to
+   allocated memory, then the application will need to save those pointers
+   elsewhere so that they can be eventually freed.
+
+     If inflateGetHeader is not used, then the header information is simply
+   discarded.  The header is always checked for validity, including the header
+   CRC if present.  inflateReset() will reset the process to discard the header
+   information.  The application would need to call inflateGetHeader() again to
+   retrieve the header from the next gzip stream.
+
+     inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+*/
+
+#endif  /* !Z_FREETYPE */
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
+                                        unsigned char FAR *window));
+
+     Initialize the internal stream state for decompression using inflateBack()
+   calls.  The fields zalloc, zfree and opaque in strm must be initialized
+   before the call.  If zalloc and zfree are Z_NULL, then the default library-
+   derived memory allocation routines are used.  windowBits is the base two
+   logarithm of the window size, in the range 8..15.  window is a caller
+   supplied buffer of that size.  Except for special applications where it is
+   assured that deflate was used with small window sizes, windowBits must be 15
+   and a 32K byte window must be supplied to be able to decompress general
+   deflate streams.
+
+     See inflateBack() for the usage of these routines.
+
+     inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
+   allocated, or Z_VERSION_ERROR if the version of the library does not match
+   the version of the header file.
+*/
+
+typedef unsigned (*in_func) OF((void FAR *,
+                                z_const unsigned char FAR * FAR *));
+typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
+
+#ifndef Z_FREETYPE
+
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+/*
+     inflateBack() does a raw inflate with a single call using a call-back
+   interface for input and output.  This is potentially more efficient than
+   inflate() for file i/o applications, in that it avoids copying between the
+   output and the sliding window by simply making the window itself the output
+   buffer.  inflate() can be faster on modern CPUs when used with large
+   buffers.  inflateBack() trusts the application to not change the output
+   buffer passed by the output function, at least until inflateBack() returns.
+
+     inflateBackInit() must be called first to allocate the internal state
+   and to initialize the state with the user-provided window buffer.
+   inflateBack() may then be used multiple times to inflate a complete, raw
+   deflate stream with each call.  inflateBackEnd() is then called to free the
+   allocated state.
+
+     A raw deflate stream is one with no zlib or gzip header or trailer.
+   This routine would normally be used in a utility that reads zip or gzip
+   files and writes out uncompressed files.  The utility would decode the
+   header and process the trailer on its own, hence this routine expects only
+   the raw deflate stream to decompress.  This is different from the default
+   behavior of inflate(), which expects a zlib header and trailer around the
+   deflate stream.
+
+     inflateBack() uses two subroutines supplied by the caller that are then
+   called by inflateBack() for input and output.  inflateBack() calls those
+   routines until it reads a complete deflate stream and writes out all of the
+   uncompressed data, or until it encounters an error.  The function's
+   parameters and return types are defined above in the in_func and out_func
+   typedefs.  inflateBack() will call in(in_desc, &buf) which should return the
+   number of bytes of provided input, and a pointer to that input in buf.  If
+   there is no input available, in() must return zero -- buf is ignored in that
+   case -- and inflateBack() will return a buffer error.  inflateBack() will
+   call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
+   out() should return zero on success, or non-zero on failure.  If out()
+   returns non-zero, inflateBack() will return with an error.  Neither in() nor
+   out() are permitted to change the contents of the window provided to
+   inflateBackInit(), which is also the buffer that out() uses to write from.
+   The length written by out() will be at most the window size.  Any non-zero
+   amount of input may be provided by in().
+
+     For convenience, inflateBack() can be provided input on the first call by
+   setting strm->next_in and strm->avail_in.  If that input is exhausted, then
+   in() will be called.  Therefore strm->next_in must be initialized before
+   calling inflateBack().  If strm->next_in is Z_NULL, then in() will be called
+   immediately for input.  If strm->next_in is not Z_NULL, then strm->avail_in
+   must also be initialized, and then if strm->avail_in is not zero, input will
+   initially be taken from strm->next_in[0 ..  strm->avail_in - 1].
+
+     The in_desc and out_desc parameters of inflateBack() is passed as the
+   first parameter of in() and out() respectively when they are called.  These
+   descriptors can be optionally used to pass any information that the caller-
+   supplied in() and out() functions need to do their job.
+
+     On return, inflateBack() will set strm->next_in and strm->avail_in to
+   pass back any unused input that was provided by the last in() call.  The
+   return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
+   if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+   in the deflate stream (in which case strm->msg is set to indicate the nature
+   of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+   In the case of Z_BUF_ERROR, an input or output error can be distinguished
+   using strm->next_in which will be Z_NULL only if in() returned an error.  If
+   strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+   non-zero.  (in() will always be called before out(), so strm->next_in is
+   assured to be defined if out() returns non-zero.)  Note that inflateBack()
+   cannot return Z_OK.
+*/
+
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
+/*
+     All memory allocated by inflateBackInit() is freed.
+
+     inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream
+   state was inconsistent.
+*/
+
+ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
+/* Return flags indicating compile-time options.
+
+    Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other:
+     1.0: size of uInt
+     3.2: size of uLong
+     5.4: size of voidpf (pointer)
+     7.6: size of z_off_t
+
+    Compiler, assembler, and debug options:
+     8: ZLIB_DEBUG
+     9: ASMV or ASMINF -- use ASM code
+     10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention
+     11: 0 (reserved)
+
+    One-time table building (smaller code, but not thread-safe if true):
+     12: BUILDFIXED -- build static block decoding tables when needed
+     13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed
+     14,15: 0 (reserved)
+
+    Library content (indicates missing functionality):
+     16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking
+                          deflate code when not needed)
+     17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect
+                    and decode gzip streams (to avoid linking crc code)
+     18-19: 0 (reserved)
+
+    Operation variations (changes in library functionality):
+     20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate
+     21: FASTEST -- deflate algorithm with only one, lowest compression level
+     22,23: 0 (reserved)
+
+    The sprintf variant used by gzprintf (zero is best):
+     24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format
+     25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure!
+     26: 0 = returns value, 1 = void -- 1 means inferred string length returned
+
+    Remainder:
+     27-31: 0 (reserved)
+ */
+
+#endif  /* !Z_FREETYPE */
+
+#ifndef Z_SOLO
+
                         /* utility functions */
 
 /*
-     The following utility functions are implemented on top of the
-   basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level and memory usage,
-   standard memory allocation functions). The source code of these
-   utility functions can easily be modified if you need special options.
+     The following utility functions are implemented on top of the basic
+   stream-oriented functions.  To simplify the interface, some default options
+   are assumed (compression level and memory usage, standard memory allocation
+   functions).  The source code of these utility functions can be modified if
+   you need special options.
 */
 
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
 /*
      Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.  compress() is equivalent to compress2() with a level
+   parameter of Z_DEFAULT_COMPRESSION.
+
      compress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
    buffer.
 */
 
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
 /*
-     Compresses the source buffer into the destination buffer. The level
+     Compresses the source buffer into the destination buffer.  The level
    parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   length of the source buffer. Upon entry, destLen is the total size of the
-   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+   length of the source buffer.  Upon entry, destLen is the total size of the
+   destination buffer, which must be at least the value returned by
+   compressBound(sourceLen).  Upon exit, destLen is the actual size of the
+   compressed data.
 
      compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
    memory, Z_BUF_ERROR if there was not enough room in the output buffer,
@@ -612,175 +1269,447 @@
    Z_STREAM_ERROR if the level parameter is invalid.
 */
 
+ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
 /*
+     compressBound() returns an upper bound on the compressed size after
+   compress() or compress2() on sourceLen bytes.  It would be used before a
+   compress() or compress2() call to allocate the destination buffer.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
      Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
+   the byte length of the source buffer.  Upon entry, destLen is the total size
+   of the destination buffer, which must be large enough to hold the entire
+   uncompressed data.  (The size of the uncompressed data must have been saved
+   previously by the compressor and transmitted to the decompressor by some
+   mechanism outside the scope of this compression library.) Upon exit, destLen
+   is the actual size of the uncompressed data.
 
      uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.  In
+   the case where there is not enough room, uncompress() will fill the output
+   buffer with the uncompressed data up to that point.
 */
 
+ZEXTERN int ZEXPORT uncompress2 OF((Bytef *dest,   uLongf *destLen,
+                                    const Bytef *source, uLong *sourceLen));
+/*
+     Same as uncompress, except that sourceLen is a pointer, where the
+   length of the source is *sourceLen.  On return, *sourceLen is the number of
+   source bytes consumed.
+*/
 
+                        /* gzip file access functions */
+
 /*
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
-   Huffman only compression as in "wb1h". (See the description
-   of deflateInit2 for more information about the strategy parameter.)
+     This library supports reading and writing files in gzip (.gz) format with
+   an interface similar to that of stdio, using the functions that start with
+   "gz".  The gzip format is different from the zlib format.  gzip is a gzip
+   wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
 
+typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
+
+/*
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+     Opens a gzip (.gz) file for reading or writing.  The mode parameter is as
+   in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+   a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+   compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+   for fixed code compression as in "wb9F".  (See the description of
+   deflateInit2 for more information about the strategy parameter.)  'T' will
+   request transparent writing or appending with no compression and not using
+   the gzip format.
+
+     "a" can be used instead of "w" to request that the gzip stream that will
+   be written be appended to the file.  "+" will result in an error, since
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
+
+     These functions, as well as gzip, will read and decode a sequence of gzip
+   streams in a file.  The append function of gzopen() can be used to create
+   such a file.  (Also see gzflush() for another way to do this.)  When
+   appending, gzopen does not test whether the file begins with a gzip stream,
+   nor does it look for the end of the gzip streams to begin appending.  gzopen
+   will simply append a gzip stream to the existing file.
+
      gzopen can be used to read a file which is not in gzip format; in this
-   case gzread will directly read from the file without decompression.
+   case gzread will directly read from the file without decompression.  When
+   reading, this will be detected automatically by looking for the magic two-
+   byte gzip header.
 
-     gzopen returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).  */
+     gzopen returns NULL if the file could not be opened, if there was
+   insufficient memory to allocate the gzFile state, or if an invalid mode was
+   specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+   errno can be checked to determine if the reason gzopen failed was that the
+   file could not be opened.
+*/
 
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
 /*
-     gzdopen() associates a gzFile with the file descriptor fd.  File
-   descriptors are obtained from calls like open, dup, creat, pipe or
-   fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in gzopen.
-     The next call of gzclose on the returned gzFile will also close the
-   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
-   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
-     gzdopen returns NULL if there was insufficient memory to allocate
-   the (de)compression state.
+     gzdopen associates a gzFile with the file descriptor fd.  File descriptors
+   are obtained from calls like open, dup, creat, pipe or fileno (if the file
+   has been previously opened with fopen).  The mode parameter is as in gzopen.
+
+     The next call of gzclose on the returned gzFile will also close the file
+   descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+   fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+   mode);.  The duplicated descriptor should be saved to avoid a leak, since
+   gzdopen does not close fd if it fails.  If you are using fileno() to get the
+   file descriptor from a FILE *, then you will have to use dup() to avoid
+   double-close()ing the file descriptor.  Both gzclose() and fclose() will
+   close the associated file descriptor, so they need to have different file
+   descriptors.
+
+     gzdopen returns NULL if there was insufficient memory to allocate the
+   gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+   provided, or '+' was provided), or if fd is -1.  The file descriptor is not
+   used until the next gz* read, write, seek, or close operation, so gzdopen
+   will not detect if fd is invalid (unless fd is -1).
 */
 
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
 /*
-     Dynamically update the compression level or strategy. See the description
-   of deflateInit2 for the meaning of these parameters.
-     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
-   opened for writing.
+     Set the internal buffer size used by this library's functions.  The
+   default buffer size is 8192 bytes.  This function must be called after
+   gzopen() or gzdopen(), and before any other calls that read or write the
+   file.  The buffer memory allocation is always deferred to the first read or
+   write.  Three times that size in buffer space is allocated.  A larger buffer
+   size of, for example, 64K or 128K bytes will noticeably increase the speed
+   of decompression (reading).
+
+     The new buffer size also affects the maximum length for gzprintf().
+
+     gzbuffer() returns 0 on success, or -1 on failure, such as being called
+   too late.
 */
 
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
 /*
-     Reads the given number of uncompressed bytes from the compressed file.
-   If the input file was not in gzip format, gzread copies the given number
-   of bytes into the buffer.
-     gzread returns the number of uncompressed bytes actually read (0 for
-   end of file, -1 for error). */
+     Dynamically update the compression level or strategy.  See the description
+   of deflateInit2 for the meaning of these parameters.  Previously provided
+   data is flushed before the parameter change.
 
+     gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not
+   opened for writing, Z_ERRNO if there is an error writing the flushed data,
+   or Z_MEM_ERROR if there is a memory allocation error.
+*/
+
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
 /*
+     Reads the given number of uncompressed bytes from the compressed file.  If
+   the input file is not in gzip format, gzread copies the given number of
+   bytes into the buffer directly from the file.
+
+     After reaching the end of a gzip stream in the input, gzread will continue
+   to read, looking for another gzip stream.  Any number of gzip streams may be
+   concatenated in the input file, and will all be decompressed by gzread().
+   If something other than a gzip stream is encountered after a gzip stream,
+   that remaining trailing garbage is ignored (and no error is returned).
+
+     gzread can be used to read a gzip file that is being concurrently written.
+   Upon reaching the end of the input, gzread will return with the available
+   data.  If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+   gzclearerr can be used to clear the end of file indicator in order to permit
+   gzread to be tried again.  Z_OK indicates that a gzip stream was completed
+   on the last gzread.  Z_BUF_ERROR indicates that the input file ended in the
+   middle of a gzip stream.  Note that gzread does not return -1 in the event
+   of an incomplete gzip stream.  This error is deferred until gzclose(), which
+   will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+   stream.  Alternatively, gzerror can be used before gzclose to detect this
+   case.
+
+     gzread returns the number of uncompressed bytes actually read, less than
+   len for end of file, or -1 for error.  If len is too large to fit in an int,
+   then nothing is read, -1 is returned, and the error state is set to
+   Z_STREAM_ERROR.
+*/
+
+ZEXTERN z_size_t ZEXPORT gzfread OF((voidp buf, z_size_t size, z_size_t nitems,
+                                     gzFile file));
+/*
+     Read up to nitems items of size size from file to buf, otherwise operating
+   as gzread() does.  This duplicates the interface of stdio's fread(), with
+   size_t request and return types.  If the library defines size_t, then
+   z_size_t is identical to size_t.  If not, then z_size_t is an unsigned
+   integer type that can contain a pointer.
+
+     gzfread() returns the number of full items read of size size, or zero if
+   the end of the file was reached and a full item could not be read, or if
+   there was an error.  gzerror() must be consulted if zero is returned in
+   order to determine if there was an error.  If the multiplication of size and
+   nitems overflows, i.e. the product does not fit in a z_size_t, then nothing
+   is read, zero is returned, and the error state is set to Z_STREAM_ERROR.
+
+     In the event that the end of file is reached and only a partial item is
+   available at the end, i.e. the remaining uncompressed data length is not a
+   multiple of size, then the final partial item is nevetheless read into buf
+   and the end-of-file flag is set.  The length of the partial item read is not
+   provided, but could be inferred from the result of gztell().  This behavior
+   is the same as the behavior of fread() implementations in common libraries,
+   but it prevents the direct use of gzfread() to read a concurrently written
+   file, reseting and retrying on end-of-file, when size is not 1.
+*/
+
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+                                voidpc buf, unsigned len));
+/*
      Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes actually written
-   (0 in case of error).
+   gzwrite returns the number of uncompressed bytes written or 0 in case of
+   error.
 */
 
+ZEXTERN z_size_t ZEXPORT gzfwrite OF((voidpc buf, z_size_t size,
+                                      z_size_t nitems, gzFile file));
 /*
-     Converts, formats, and writes the args to the compressed file under
-   control of the format string, as in fprintf. gzprintf returns the number of
-   uncompressed bytes actually written (0 in case of error).
+     gzfwrite() writes nitems items of size size from buf to file, duplicating
+   the interface of stdio's fwrite(), with size_t request and return types.  If
+   the library defines size_t, then z_size_t is identical to size_t.  If not,
+   then z_size_t is an unsigned integer type that can contain a pointer.
+
+     gzfwrite() returns the number of full items written of size size, or zero
+   if there was an error.  If the multiplication of size and nitems overflows,
+   i.e. the product does not fit in a z_size_t, then nothing is written, zero
+   is returned, and the error state is set to Z_STREAM_ERROR.
 */
 
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
 /*
-      Writes the given null-terminated string to the compressed file, excluding
+     Converts, formats, and writes the arguments to the compressed file under
+   control of the format string, as in fprintf.  gzprintf returns the number of
+   uncompressed bytes actually written, or a negative zlib error code in case
+   of error.  The number of uncompressed bytes written is limited to 8191, or
+   one less than the buffer size given to gzbuffer().  The caller should assure
+   that this limit is not exceeded.  If it is exceeded, then gzprintf() will
+   return an error (0) with nothing written.  In this case, there may also be a
+   buffer overflow with unpredictable consequences, which is possible only if
+   zlib was compiled with the insecure functions sprintf() or vsprintf()
+   because the secure snprintf() or vsnprintf() functions were not available.
+   This can be determined using zlibCompileFlags().
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+     Writes the given null-terminated string to the compressed file, excluding
    the terminating null character.
-      gzputs returns the number of characters written, or -1 in case of error.
+
+     gzputs returns the number of characters written, or -1 in case of error.
 */
 
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
 /*
-      Reads bytes from the compressed file until len-1 characters are read, or
-   a newline character is read and transferred to buf, or an end-of-file
-   condition is encountered.  The string is then terminated with a null
-   character.
-      gzgets returns buf, or Z_NULL in case of error.
+     Reads bytes from the compressed file until len-1 characters are read, or a
+   newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  If any characters are read or if len == 1, the
+   string is terminated with a null character.  If no characters are read due
+   to an end-of-file or len < 1, then the buffer is left untouched.
+
+     gzgets returns buf which is a null-terminated string, or it returns NULL
+   for end-of-file or in case of error.  If there was an error, the contents at
+   buf are indeterminate.
 */
 
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
 /*
-      Writes c, converted to an unsigned char, into the compressed file.
-   gzputc returns the value that was written, or -1 in case of error.
+     Writes c, converted to an unsigned char, into the compressed file.  gzputc
+   returns the value that was written, or -1 in case of error.
 */
 
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
 /*
-      Reads one byte from the compressed file. gzgetc returns this byte
-   or -1 in case of end of file or error.
+     Reads one byte from the compressed file.  gzgetc returns this byte or -1
+   in case of end of file or error.  This is implemented as a macro for speed.
+   As such, it does not do all of the checking the other functions do.  I.e.
+   it does not check to see if file is NULL, nor whether the structure file
+   points to has been clobbered or not.
 */
 
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
 /*
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function. The return value is the zlib
-   error number (see function gzerror below). gzflush returns Z_OK if
-   the flush parameter is Z_FINISH and all output could be flushed.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
+     Push one character back onto the stream to be read as the first character
+   on the next read.  At least one character of push-back is allowed.
+   gzungetc() returns the character pushed, or -1 on failure.  gzungetc() will
+   fail if c is -1, and may fail if a character has been pushed but not read
+   yet.  If gzungetc is used immediately after gzopen or gzdopen, at least the
+   output buffer size of pushed characters is allowed.  (See gzbuffer above.)
+   The pushed character will be discarded if the stream is repositioned with
+   gzseek() or gzrewind().
 */
 
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
 /*
-      Sets the starting position for the next gzread or gzwrite on the
-   given compressed file. The offset represents a number of bytes in the
-   uncompressed data stream. The whence parameter is defined as in lseek(2);
+     Flushes all pending output into the compressed file.  The parameter flush
+   is as in the deflate() function.  The return value is the zlib error number
+   (see function gzerror below).  gzflush is only permitted when writing.
+
+     If the flush parameter is Z_FINISH, the remaining data is written and the
+   gzip stream is completed in the output.  If gzwrite() is called again, a new
+   gzip stream will be started in the output.  gzread() is able to read such
+   concatenated gzip streams.
+
+     gzflush should be called only when strictly necessary because it will
+   degrade compression if called too often.
+*/
+
+/*
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+                                   z_off_t offset, int whence));
+
+     Sets the starting position for the next gzread or gzwrite on the given
+   compressed file.  The offset represents a number of bytes in the
+   uncompressed data stream.  The whence parameter is defined as in lseek(2);
    the value SEEK_END is not supported.
+
      If the file is opened for reading, this function is emulated but can be
-   extremely slow. If the file is opened for writing, only forward seeks are
+   extremely slow.  If the file is opened for writing, only forward seeks are
    supported; gzseek then compresses a sequence of zeroes up to the new
    starting position.
 
-      gzseek returns the resulting offset location as measured in bytes from
+     gzseek returns the resulting offset location as measured in bytes from
    the beginning of the uncompressed stream, or -1 in case of error, in
    particular if the file is opened for writing and the new starting position
    would be before the current position.
 */
 
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
 /*
      Rewinds the given file. This function is supported only for reading.
 
-   gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+     gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
 */
 
 /*
-     Returns the starting position for the next gzread or gzwrite on the
-   given compressed file. This position represents a number of bytes in the
-   uncompressed data stream.
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
 
-   gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+     Returns the starting position for the next gzread or gzwrite on the given
+   compressed file.  This position represents a number of bytes in the
+   uncompressed data stream, and is zero when starting, even if appending or
+   reading a gzip stream from the middle of a file using gzdopen().
+
+     gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
 */
 
 /*
-     Returns 1 when EOF has previously been detected reading the given
-   input stream, otherwise zero.
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
+
+     Returns the current offset in the file being read or written.  This offset
+   includes the count of bytes that precede the gzip stream, for example when
+   appending or when using gzdopen() for reading.  When reading, the offset
+   does not include as yet unused buffered input.  This information can be used
+   for a progress indicator.  On error, gzoffset() returns -1.
 */
 
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
 /*
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state. The return value is the zlib
-   error number (see function gzerror below).
+     Returns true (1) if the end-of-file indicator has been set while reading,
+   false (0) otherwise.  Note that the end-of-file indicator is set only if the
+   read tried to go past the end of the input, but came up short.  Therefore,
+   just like feof(), gzeof() may return false even if there is no more data to
+   read, in the event that the last read request was for the exact number of
+   bytes remaining in the input file.  This will happen if the input file size
+   is an exact multiple of the buffer size.
+
+     If gzeof() returns true, then the read functions will return no more data,
+   unless the end-of-file indicator is reset by gzclearerr() and the input file
+   has grown since the previous end of file was detected.
 */
 
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
 /*
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
+     Returns true (1) if file is being copied directly while reading, or false
+   (0) if file is a gzip stream being decompressed.
+
+     If the input file is empty, gzdirect() will return true, since the input
+   does not contain a gzip stream.
+
+     If gzdirect() is used immediately after gzopen() or gzdopen() it will
+   cause buffers to be allocated to allow reading the file to determine if it
+   is a gzip file.  Therefore if gzbuffer() is used, it should be called before
+   gzdirect().
+
+     When writing, gzdirect() returns true (1) if transparent writing was
+   requested ("wT" for the gzopen() mode), or false (0) otherwise.  (Note:
+   gzdirect() is not needed when writing.  Transparent writing must be
+   explicitly requested, so the application already knows the answer.  When
+   linking statically, using gzdirect() will include all of the zlib code for
+   gzip file reading and decompression, which may not be desired.)
 */
 
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flushes all pending output if necessary, closes the compressed file and
+   deallocates the (de)compression state.  Note that once file is closed, you
+   cannot call gzerror with file, since its structures have been deallocated.
+   gzclose must not be called more than once on the same file, just as free
+   must not be called more than once on the same allocation.
+
+     gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+   file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+   last read ended in the middle of a gzip stream, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+     Same as gzclose(), but gzclose_r() is only for use when reading, and
+   gzclose_w() is only for use when writing or appending.  The advantage to
+   using these instead of gzclose() is that they avoid linking in zlib
+   compression or decompression code that is not used when only reading or only
+   writing respectively.  If gzclose() is used, then both compression and
+   decompression code will be included the application when linking to a static
+   zlib library.
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Returns the error message for the last error which occurred on the given
+   compressed file.  errnum is set to zlib error number.  If an error occurred
+   in the file system and not in the compression library, errnum is set to
+   Z_ERRNO and the application may consult errno to get the exact error code.
+
+     The application must not modify the returned string.  Future calls to
+   this function may invalidate the previously returned string.  If file is
+   closed, then the string previously returned by gzerror will no longer be
+   available.
+
+     gzerror() should be used to distinguish errors from end-of-file for those
+   functions above that do not distinguish those cases in their return values.
+*/
+
+ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
+/*
+     Clears the error and end-of-file flags for file.  This is analogous to the
+   clearerr() function in stdio.  This is useful for continuing to read a gzip
+   file that is being written concurrently.
+*/
+
+#endif /* !Z_SOLO */
+
                         /* checksum functions */
 
 /*
      These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the
-   compression library.
+   anyway because they might be useful in applications using the compression
+   library.
 */
 
-ZEXTERN(uLong)  adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
 /*
      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
+   return the updated checksum.  If buf is Z_NULL, this function returns the
+   required initial value for the checksum.
 
+     An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
+   much faster.
+
+   Usage example:
+
      uLong adler = adler32(0L, Z_NULL, 0);
 
      while (read_buffer(buffer, length) != EOF) {
@@ -789,11 +1718,31 @@
      if (adler != original_adler) error();
 */
 
+ZEXTERN uLong ZEXPORT adler32_z OF((uLong adler, const Bytef *buf,
+                                    z_size_t len));
 /*
-     Update a running crc with the bytes buf[0..len-1] and return the updated
-   crc. If buf is NULL, this function returns the required initial value
-   for the crc. Pre- and post-conditioning (one's complement) is performed
-   within this function so it shouldn't be done by the application.
+     Same as adler32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+                                          z_off_t len2));
+
+     Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
+   and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+   each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
+*/
+
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running CRC-32 with the bytes buf[0..len-1] and return the
+   updated CRC-32.  If buf is Z_NULL, this function returns the required
+   initial value for the crc.  Pre- and post-conditioning (one's complement) is
+   performed within this function so it shouldn't be done by the application.
+
    Usage example:
 
      uLong crc = crc32(0L, Z_NULL, 0);
@@ -804,27 +1753,193 @@
      if (crc != original_crc) error();
 */
 
+#ifndef Z_FREETYPE
 
+ZEXTERN uLong ZEXPORT crc32_z OF((uLong adler, const Bytef *buf,
+                                  z_size_t len));
+/*
+     Same as crc32(), but with a size_t length.
+*/
+
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+     Combine two CRC-32 check values into one.  For two sequences of bytes,
+   seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+   calculated for each, crc1 and crc2.  crc32_combine() returns the CRC-32
+   check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+   len2.
+*/
+
                         /* various hacks, don't look :) */
 
 /* deflateInit and inflateInit are macros to allow checking the zlib version
  * and the compiler's view of z_stream:
  */
-ZEXTERN(int)  inflateInit2_ OF((z_streamp strm, int  windowBits,
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
                                       const char *version, int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#ifdef Z_PREFIX_SET
+#  define z_deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define z_inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define z_inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#else
+#  define deflateInit(strm, level) \
+          deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit(strm) \
+          inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+          deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                        (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
+#  define inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+#  define inflateBackInit(strm, windowBits, window) \
+          inflateBackInit_((strm), (windowBits), (window), \
+                           ZLIB_VERSION, (int)sizeof(z_stream))
+#endif
 
+#else  /* Z_FREETYPE */
 
+
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+
+#  define inflateInit2(strm, windowBits) \
+          inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                        (int)sizeof(z_stream))
+
+#endif  /* Z_FREETYPE */
+
+
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure.  Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro.  The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously.  They can
+ * only be used by the gzgetc() macro.  You have been warned.
+ */
+struct gzFile_s {
+    unsigned have;
+    unsigned char *next;
+    z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
+#ifdef Z_PREFIX_SET
+#  undef z_gzgetc
+#  define z_gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#else
+#  define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g))
+#endif
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#ifdef Z_LARGE64
+   ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
+#  ifdef Z_PREFIX_SET
+#    define z_gzopen z_gzopen64
+#    define z_gzseek z_gzseek64
+#    define z_gztell z_gztell64
+#    define z_gzoffset z_gzoffset64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#  else
+#    define gzopen gzopen64
+#    define gzseek gzseek64
+#    define gztell gztell64
+#    define gzoffset gzoffset64
+#    define adler32_combine adler32_combine64
+#    define crc32_combine crc32_combine64
+#  endif
+#  ifndef Z_LARGE64
+     ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#  endif
+#else
+   ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+   ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+   ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+   ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#else /* Z_SOLO */
+
+#ifndef Z_FREETYPE
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+
+#endif /* !Z_SOLO */
+
+/* undocumented functions */
+#ifndef Z_FREETYPE
+ZEXTERN const char   * ZEXPORT zError           OF((int));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
+ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int            ZEXPORT inflateValidate OF((z_streamp, int));
+ZEXTERN unsigned long  ZEXPORT inflateCodesUsed OF ((z_streamp));
+ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+#if (defined(_WIN32) || defined(__CYGWIN__)) && !defined(Z_SOLO)
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifndef Z_SOLO
+ZEXTERN int            ZEXPORTVA gzvprintf Z_ARG((gzFile file,
+                                                  const char *format,
+                                                  va_list va));
+#  endif
+#endif
+#endif  /* !Z_FREETYPE */
+
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* _ZLIB_H */
+#endif /* ZLIB_H */
--- a/src/gzip/zutil.c
+++ b/src/gzip/zutil.c
@@ -1,5 +1,5 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2017 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -6,18 +6,150 @@
 /* @(#) $Id$ */
 
 #include "zutil.h"
+#ifndef Z_SOLO
+#  include "gzguts.h"
+#endif
 
-#ifndef STDC
-extern void exit OF((int));
+z_const char * const z_errmsg[10] = {
+    (z_const char *)"need dictionary",     /* Z_NEED_DICT       2  */
+    (z_const char *)"stream end",          /* Z_STREAM_END      1  */
+    (z_const char *)"",                    /* Z_OK              0  */
+    (z_const char *)"file error",          /* Z_ERRNO         (-1) */
+    (z_const char *)"stream error",        /* Z_STREAM_ERROR  (-2) */
+    (z_const char *)"data error",          /* Z_DATA_ERROR    (-3) */
+    (z_const char *)"insufficient memory", /* Z_MEM_ERROR     (-4) */
+    (z_const char *)"buffer error",        /* Z_BUF_ERROR     (-5) */
+    (z_const char *)"incompatible version",/* Z_VERSION_ERROR (-6) */
+    (z_const char *)""
+};
+
+
+const char * ZEXPORT zlibVersion()
+{
+    return ZLIB_VERSION;
+}
+
+uLong ZEXPORT zlibCompileFlags()
+{
+    uLong flags;
+
+    flags = 0;
+    switch ((int)(sizeof(uInt))) {
+    case 2:     break;
+    case 4:     flags += 1;     break;
+    case 8:     flags += 2;     break;
+    default:    flags += 3;
+    }
+    switch ((int)(sizeof(uLong))) {
+    case 2:     break;
+    case 4:     flags += 1 << 2;        break;
+    case 8:     flags += 2 << 2;        break;
+    default:    flags += 3 << 2;
+    }
+    switch ((int)(sizeof(voidpf))) {
+    case 2:     break;
+    case 4:     flags += 1 << 4;        break;
+    case 8:     flags += 2 << 4;        break;
+    default:    flags += 3 << 4;
+    }
+    switch ((int)(sizeof(z_off_t))) {
+    case 2:     break;
+    case 4:     flags += 1 << 6;        break;
+    case 8:     flags += 2 << 6;        break;
+    default:    flags += 3 << 6;
+    }
+#ifdef ZLIB_DEBUG
+    flags += 1 << 8;
 #endif
+#if defined(ASMV) || defined(ASMINF)
+    flags += 1 << 9;
+#endif
+#ifdef ZLIB_WINAPI
+    flags += 1 << 10;
+#endif
+#ifdef BUILDFIXED
+    flags += 1 << 12;
+#endif
+#ifdef DYNAMIC_CRC_TABLE
+    flags += 1 << 13;
+#endif
+#ifdef NO_GZCOMPRESS
+    flags += 1L << 16;
+#endif
+#ifdef NO_GZIP
+    flags += 1L << 17;
+#endif
+#ifdef PKZIP_BUG_WORKAROUND
+    flags += 1L << 20;
+#endif
+#ifdef FASTEST
+    flags += 1L << 21;
+#endif
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifdef NO_vsnprintf
+    flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#else
+    flags += 1L << 24;
+#  ifdef NO_snprintf
+    flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#endif
+    return flags;
+}
 
+#ifdef ZLIB_DEBUG
+#include <stdlib.h>
+#  ifndef verbose
+#    define verbose 0
+#  endif
+int ZLIB_INTERNAL z_verbose = verbose;
 
+void ZLIB_INTERNAL z_error (
+    char *m)
+{
+    fprintf(stderr, "%s\n", m);
+    exit(1);
+}
+#endif
+
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(
+    int err)
+{
+    return ERR_MSG(err);
+}
+
+#if defined(_WIN32_WCE)
+    /* The Microsoft C Run-Time Library for Windows CE doesn't have
+     * errno.  We define it as a global variable to simplify porting.
+     * Its value is always 0 and should not be used.
+     */
+    int errno = 0;
+#endif
+
 #ifndef HAVE_MEMCPY
 
-void zmemcpy(dest, source, len)
-    Bytef* dest;
-    const Bytef* source;
-    uInt  len;
+void ZLIB_INTERNAL zmemcpy(
+    Bytef* dest,
+    const Bytef* source,
+    uInt  len)
 {
     if (len == 0) return;
     do {
@@ -25,10 +157,10 @@
     } while (--len != 0);
 }
 
-int zmemcmp(s1, s2, len)
-    const Bytef* s1;
-    const Bytef* s2;
-    uInt  len;
+int ZLIB_INTERNAL zmemcmp(
+    const Bytef* s1,
+    const Bytef* s2,
+    uInt  len)
 {
     uInt j;
 
@@ -38,9 +170,9 @@
     return 0;
 }
 
-void zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
+void ZLIB_INTERNAL zmemzero(
+    Bytef* dest,
+    uInt  len)
 {
     if (len == 0) return;
     do {
@@ -49,11 +181,13 @@
 }
 #endif
 
-#if defined( MSDOS ) && defined( __TURBOC__ ) && !defined( MY_ZCALLOC )
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
+#ifndef Z_SOLO
+
+#ifdef SYS16BIT
+
+#ifdef __TURBOC__
+/* Turbo C in 16-bit mode */
+
 #  define MY_ZCALLOC
 
 /* Turbo C malloc() does not allow dynamic allocation of 64K bytes
@@ -80,11 +214,13 @@
  * a protected system like OS/2. Use Microsoft C instead.
  */
 
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
 {
-    voidpf buf = opaque; /* just to make some compilers happy */
+    voidpf buf;
     ulg bsize = (ulg)items*size;
 
+    (void)opaque;
+
     /* If we allocate less than 65520 bytes, we assume that farmalloc
      * will return a usable pointer which doesn't have to be normalized.
      */
@@ -104,9 +240,12 @@
     return buf;
 }
 
-void  zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
     int n;
+
+    (void)opaque;
+
     if (*(ush*)&ptr != 0) { /* object < 64K */
         farfree(ptr);
         return;
@@ -122,14 +261,13 @@
         next_ptr--;
         return;
     }
-    ptr = opaque; /* just to make some compilers happy */
     Assert(0, "zcfree: ptr not found");
 }
-#endif
-#endif /* MSDOS && __TURBOC__ */
 
+#endif /* __TURBOC__ */
 
-#if defined(M_I86) && !defined(__32BIT__) && !defined( MY_ZCALLOC )
+
+#ifdef M_I86
 /* Microsoft C in 16-bit mode */
 
 #  define MY_ZCALLOC
@@ -139,43 +277,49 @@
 #  define _hfree   hfree
 #endif
 
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
 {
-    if (opaque) opaque = 0; /* to make compiler happy */
+    (void)opaque;
     return _halloc((long)items, size);
 }
 
-void  zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
-    if (opaque) opaque = 0; /* to make compiler happy */
+    (void)opaque;
     _hfree(ptr);
 }
 
-#endif /* MSC */
+#endif /* M_I86 */
 
+#endif /* SYS16BIT */
 
+
 #ifndef MY_ZCALLOC /* Any system without a special alloc function */
 
 #ifndef STDC
-extern voidp  ft_scalloc OF((uInt items, uInt size));
-extern void   ft_sfree   OF((voidpf ptr));
+extern voidp  malloc OF((uInt size));
+extern voidp  calloc OF((uInt items, uInt size));
+extern void   free   OF((voidpf ptr));
 #endif
 
-voidpf zcalloc (opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
+voidpf ZLIB_INTERNAL zcalloc (
+    voidpf opaque,
+    unsigned items,
+    unsigned size)
 {
-    if (opaque) items += size - size; /* make compiler happy */
-    return (voidpf)ft_scalloc(items, size);
+    (void)opaque;
+    return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) :
+                              (voidpf)calloc(items, size);
 }
 
-void  zcfree (opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
+void ZLIB_INTERNAL zcfree (
+    voidpf opaque,
+    voidpf ptr)
 {
-    ft_sfree(ptr);
-    if (opaque) return; /* make compiler happy */
+    (void)opaque;
+    free(ptr);
 }
 
 #endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */
--- a/src/gzip/zutil.h
+++ b/src/gzip/zutil.h
@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -10,26 +10,35 @@
 
 /* @(#) $Id$ */
 
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
+#ifndef ZUTIL_H
+#define ZUTIL_H
 
+#ifdef HAVE_HIDDEN
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
 #include "zlib.h"
 
-#ifdef STDC
-#  include <stddef.h>
+#if defined(STDC) && !defined(Z_SOLO)
+#  if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+#    include <stddef.h>
+#  endif
 #  include <string.h>
 #  include <stdlib.h>
 #endif
-#ifdef NO_ERRNO_H
-    extern int errno;
-#else
-#   include <errno.h>
+
+#ifdef Z_SOLO
+   typedef long ptrdiff_t;  /* guess -- will be caught if guess is wrong */
 #endif
 
 #ifndef local
 #  define local static
 #endif
-/* compile with -Dlocal if your debugger can't find static symbols */
+/* since "static" is used to mean two completely different things in C, we
+   define "local" for the non-static meaning of "static", for readability
+   (compile with -Dlocal if your debugger can't find static symbols) */
 
 typedef unsigned char  uch;
 typedef uch FAR uchf;
@@ -37,9 +46,13 @@
 typedef ush FAR ushf;
 typedef unsigned long  ulg;
 
+extern z_const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
 
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
 #define ERR_RETURN(strm,err) \
-  return (strm->msg = (char*)ERR_MSG(err), (err))
+  return (strm->msg = ERR_MSG(err), (err))
 /* To be used only when the state is known to be valid */
 
         /* common constants */
@@ -69,90 +82,133 @@
 
         /* target dependencies */
 
-#ifdef MSDOS
+#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
 #  define OS_CODE  0x00
-#  if defined(__TURBOC__) || defined(__BORLANDC__)
-#    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
-       /* Allow compilation with ANSI keywords only enabled */
-       void _Cdecl farfree( void *block );
-       void *_Cdecl farmalloc( unsigned long nbytes );
-#    else
-#     include <alloc.h>
+#  ifndef Z_SOLO
+#    if defined(__TURBOC__) || defined(__BORLANDC__)
+#      if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+         /* Allow compilation with ANSI keywords only enabled */
+         void _Cdecl farfree( void *block );
+         void *_Cdecl farmalloc( unsigned long nbytes );
+#      else
+#        include <alloc.h>
+#      endif
+#    else /* MSC or DJGPP */
+#      include <malloc.h>
 #    endif
-#  else /* MSC or DJGPP */
 #  endif
 #endif
 
-#ifdef OS2
-#  define OS_CODE  0x06
+#ifdef AMIGA
+#  define OS_CODE  1
 #endif
 
-#ifdef WIN32 /* Window 95 & Windows NT */
-#  define OS_CODE  0x0b
-#endif
-
 #if defined(VAXC) || defined(VMS)
-#  define OS_CODE  0x02
+#  define OS_CODE  2
 #  define F_OPEN(name, mode) \
-     ft_fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
 #endif
 
-#ifdef AMIGA
-#  define OS_CODE  0x01
+#ifdef __370__
+#  if __TARGET_LIB__ < 0x20000000
+#    define OS_CODE 4
+#  elif __TARGET_LIB__ < 0x40000000
+#    define OS_CODE 11
+#  else
+#    define OS_CODE 8
+#  endif
 #endif
 
 #if defined(ATARI) || defined(atarist)
-#  define OS_CODE  0x05
+#  define OS_CODE  5
 #endif
 
+#ifdef OS2
+#  define OS_CODE  6
+#  if defined(M_I86) && !defined(Z_SOLO)
+#    include <malloc.h>
+#  endif
+#endif
+
 #if defined(MACOS) || defined(TARGET_OS_MAC)
-#  define OS_CODE  0x07
-#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-#    include <unix.h> /* for fdopen */
-#  else
-#    ifndef fdopen
-#      define fdopen(fd,mode) NULL /* No fdopen() */
+#  define OS_CODE  7
+#  ifndef Z_SOLO
+#    if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#      include <unix.h> /* for fdopen */
+#    else
+#      ifndef fdopen
+#        define fdopen(fd,mode) NULL /* No fdopen() */
+#      endif
 #    endif
 #  endif
 #endif
 
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0F
+#ifdef __acorn
+#  define OS_CODE 13
 #endif
 
-#ifdef TOPS20
-#  define OS_CODE  0x0a
+#if defined(WIN32) && !defined(__CYGWIN__)
+#  define OS_CODE  10
 #endif
 
+#ifdef _BEOS_
+#  define OS_CODE  16
+#endif
+
+#ifdef __TOS_OS400__
+#  define OS_CODE 18
+#endif
+
+#ifdef __APPLE__
+#  define OS_CODE 19
+#endif
+
 #if defined(_BEOS_) || defined(RISCOS)
 #  define fdopen(fd,mode) NULL /* No fdopen() */
 #endif
 
-#if (defined(_MSC_VER) && (_MSC_VER > 600))
-#  define fdopen(fd,type)  _fdopen(fd,type)
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
+#  if defined(_WIN32_WCE)
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#    ifndef _PTRDIFF_T_DEFINED
+       typedef int ptrdiff_t;
+#      define _PTRDIFF_T_DEFINED
+#    endif
+#  else
+#    define fdopen(fd,type)  _fdopen(fd,type)
+#  endif
 #endif
 
+#if defined(__BORLANDC__) && !defined(MSDOS)
+  #pragma warn -8004
+  #pragma warn -8008
+  #pragma warn -8066
+#endif
 
-        /* Common defaults */
+#ifndef Z_FREETYPE
 
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_WIN32) && \
+    (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
+    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
+
+#endif  /* !Z_FREETYPE */
+
+        /* common defaults */
+
 #ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
+#  define OS_CODE  3     /* assume Unix */
 #endif
 
 #ifndef F_OPEN
-#  define F_OPEN(name, mode) ft_fopen((name), (mode))
+#  define F_OPEN(name, mode) fopen((name), (mode))
 #endif
 
          /* functions */
 
-#ifdef HAVE_STRERROR
-   extern char *strerror OF((int));
-#  define zstrerror(errnum) strerror(errnum)
-#else
-#  define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
+#if defined(pyr) || defined(Z_SOLO)
 #  define NO_MEMCPY
 #endif
 #if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
@@ -176,16 +232,16 @@
 #    define zmemzero(dest, len) ft_memset(dest, 0, len)
 #  endif
 #else
-   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
-   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
-   extern void zmemzero OF((Bytef* dest, uInt len));
+   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
 #endif
 
 /* Diagnostic functions */
-#ifdef DEBUG
+#ifdef ZLIB_DEBUG
 #  include <stdio.h>
-   extern int z_verbose;
-   extern void z_error    OF((char *m));
+   extern int ZLIB_INTERNAL z_verbose;
+   extern void ZLIB_INTERNAL z_error OF((char *m));
 #  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
 #  define Trace(x) {if (z_verbose>=0) fprintf x ;}
 #  define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -201,15 +257,19 @@
 #  define Tracecv(c,x)
 #endif
 
+#ifndef Z_SOLO
+   voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+                                    unsigned size));
+   void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
+#endif
 
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf,
-                                uInt len));
-local voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-local void   zcfree  OF((voidpf opaque, voidpf ptr));
-
 #define ZALLOC(strm, items, size) \
            (*((strm)->zalloc))((strm)->opaque, (items), (size))
 #define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
 #define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
 
-#endif /* _Z_UTIL_H */
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+                    (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
+#endif /* ZUTIL_H */